At last, unfortunately, i ended up with a dead/bricked Phab-2,
I was trying to flash recovery using fastboot, than i think i made a wrong flash with " fastboot flash boot ****.img" and than all gone.
now i am using spft to flash the stock firmware including preloader,
but an error occures as: S-SECURITY_SLA_FAIL (6004), MSP ERROR CODE: 0x00
and while flashing through the cracked miracle box, the phone automatically disconnects at 7% of
downloading boot8..
Click to expand...
Click to collapse
If your device still boots on fastboot then why not flash the correct boot or recovery image?
Is your device rooted?
suggestion
sunrider07 said:
If your device still boots on fastboot then why not flash the correct boot or recovery image?
Is your device rooted?
Click to expand...
Click to collapse
I guess , he was trying ot flash twrp,unsuccessful, thatmeans no root, correct me if I m wrong.
download original version [038] version,Unpack All
Install drivers from Drivers folder
Start SPFT tool
Click download agent and select "DA_SWSEC_CRYPTO20_0403.bin"
Press CTRL + ALT + S
Click auth file and select "auth_sv5_98998_philip.auth"
Click Scatter loading and select scatter from \SW\target_bin
Press Download and connect powered off device to usb cable
now Wait some time.
done
sunrider07 said:
If your device still boots on fastboot then why not flash the correct boot or recovery image?
Is your device rooted?
Click to expand...
Click to collapse
Not botting in any mode.
sushil888 said:
I guess , he was trying ot flash twrp,unsuccessful, thatmeans no root, correct me if I m wrong.
download original version [038] version,Unpack All
Install drivers from Drivers folder
Start SPFT tool
Click download agent and select "DA_SWSEC_CRYPTO20_0403.bin"
Press CTRL + ALT + S
Click auth file and select "auth_sv5_98998_philip.auth"
Click Scatter loading and select scatter from \SW\target_bin
Press Download and connect powered off device to usb cable
now Wait some time.
done
Click to expand...
Click to collapse
Yep, flashing twrp was failed, than i tried
fastboot boot twrp.Img
And then stucked. Phone wasn't responding. Not even showing charging screen, neither it was vibrating while pressing buttons. It was all bricked. And flashing through spft too was showing error that i showed in the main post.
But now when i tried CTRL + ALT + S in spft, the trick worked,earlier i was trying it without CTRL + ALT + S, now my device has got a second life ?. Thank you so much.
small request to vijayid>>_94
Vijay,.. it was just copy paste fm me... But at least i tried to help here in this section, nobody have time ( inguess), just thank the original great developer mr BRKA. Link below
http://forum.gsmhosting.com/vbb/f958/lenovo-phones-root-2141921/index3.html
sushil888 said:
Vijay,.. it was just copy paste fm me... But at least i tried to help here in this section, nobody have time ( inguess), just thank the original great developer mr BRKA. Link below
http://forum.gsmhosting.com/vbb/f958/lenovo-phones-root-2141921/index3.html
Click to expand...
Click to collapse
Done.. And thanks for the efforts
Guys, I too have the India model and bricked my device trying to flash SuperSU and root it. Tried flashing thru SPFT, but it doesn't seem to work. Am still able to boot into TWRP and Fastboot. Can someone help?
Related
Yesterday I had an update for the newest NIGHTLY Cyanogen ROM, which updated my ZUK Z1 to Cm 13 compatible to android 6.0.1
I had installed a NIGHTLY recovery and ROM on my own 3 months ago and everything was working fine. till yesterday after the update
Google Play was not compatible with my newest rom so i had to find a way to install 6.0 version of Gapps cause during the install i
kept getting a message that system partition had not enough space, which was not true.
I used ADB to re-install the latest NIGHTLY recovery and then BOOM... I got that message that bootimage was incomplete or not signed and my ZUK
bricked... It keeps loop booting and I'm not able to enter any recovery or boot in to bootloader.
Any help here would be greatful....
Thanks in advance Nick
TWRP installed on your Z1?
Monget said:
TWRP installed on your Z1?
Click to expand...
Click to collapse
Call me a noob, but I think I never istalled TWRP... Just the NIGHTLY recovery using ADB and then flashed NIGHTLY ROM via the recovery..
Now I can do nothing. I press power button, phone vibrates I see the ZUK logo, then bootloops forever..
Be optimistic your zuk is not dead.
A adb sideload with Cos 12.1 will be a good start. Download the last rom cos (Yogpas3 (of head) and go in recovery cyanogen, I think you did not flash TWRP
Monget said:
Be optimistic your zuk is not dead.
A adb sideload with Cos 12.1 will be a good start. Download the last rom cos (Yogpas3 (of head) and go in recovery cyanogen, I think you did not flash TWRP
Click to expand...
Click to collapse
I cannot enter recovery mode...
My zuk keeps boot looping forever. It just vibrates and I see the ZUK logo for less than a second. Then the same again
Nikosstamatiou said:
I cannot enter recovery mode...
My zuk keeps boot looping forever. It just vibrates and I see the ZUK logo for less than a second. Then the same again
Click to expand...
Click to collapse
i just managed to enter fastboot mode by pressing both volume + and - and then plugging the usb cable into my phone... Any ideas now?
Nikosstamatiou said:
i just managed to enter fastboot mode by pressing both volume + and - and then plugging the usb cable into my phone... Any ideas now?
Click to expand...
Click to collapse
Try to download this : http://loadbalancing.modaco.com/download.php?file=z1.recovery.testkeys.img
Put in a folder, and try an "fastboot i 0x2b4c boot z1.recovery.testkeys.img"
This requires of course that pilot is properly installed on the PC
Sorry for my bad english dude, i do my best (French)
Monget said:
Try to download this : http: // loadbalancing.modaco.com/download.php?file=z1.recovery.testkeys.img
Put in a folder, and try an "fastboot i 0x2b4c boot z1.recovery.testkeys.img"
This requires of course that pilot is properly installed on the PC
Sorry for my bad english dude, i do my best (French)
Click to expand...
Click to collapse
hehe it's ok friend I'm not english or american so we both cant speak very good english...!!!
well I've tried what you told me. I get the message that device is locked, I then try "fastboot -i 0x2b4c oem unlock"
but it won't let me unlock the device... what do I try next...??
Nikosstamatiou said:
hehe it's ok friend I'm not english or american so we both cant speak very good english...!!!
well I've tried what you told me. I get the message that device is locked, I then try "fastboot -i 0x2b4c oem unlock"
but it won't let me unlock the device... what do I try next...??
Click to expand...
Click to collapse
Hum enter "fastboot -i 0x2b4c oem unlock-go"
Any reaction after this command?
Monget said:
Hum enter "fastboot -i 0x2b4c oem unlock-go"
Any reaction after this command?
Click to expand...
Click to collapse
nope... still not letting me unlock. same with flashing unlock and flashing unlock_critical. Only that when I type these commands it seems to be doing something..
i get the "..." message like it is working on something..
SOLVED
problem finally solved, i guess..!!
I had to use QFIL application, which flashed the ZUI version again on my phone, and then booted a cyanogen recovery and a cyanogen nighlty rom..
What does
fastboot oem device-info
say?
Perhaps it is unlocked, I didn't have a proper UNLOCKED message, but the status shows the Unlocked State.
Otherwise try the original Recoveries / OS from:
https://cyngn.com/support
sirmelkor said:
What does
fastboot oem device-info
say?
Perhaps it is unlocked, I didn't have a proper UNLOCKED message, but the status shows the Unlocked State.
Otherwise try the original Recoveries / OS from:
https://cyngn.com/support
Click to expand...
Click to collapse
I think I solved it..
I had to use QFIL application, which flashed the ZUI version again on my phone, and then booted a TWRP recovery by breadcrust and a Cyannogen nighlty rom..
Nikosstamatiou said:
I think I solved it..
I had to use QFIL application, which flashed the ZUI version again on my phone, and then booted a TWRP recovery by breadcrust and a Cyannogen nighlty rom..
Click to expand...
Click to collapse
I have the same problem ..
What the steps ..knowing that I'm not an expert ..
So I hope to simplify the steps in order to get ..
alhoaoy said:
I have the same problem ..
What the steps ..knowing that I'm not an expert ..
So I hope to simplify the steps in order to get ..
Click to expand...
Click to collapse
You'll have to find QPST which is a package of applications, including QFIL. Then you need to find the ZUI ROM and recovery, which will boot again your ZUK. I'll send ypu links ASAP. You can find them for yourself if ypu are in a hurry in xda site. don't worry you'll revive it!!
Nikosstamatiou said:
You'll have to find QPST which is a package of applications, including QFIL. Then you need to find the ZUI ROM and recovery, which will boot again your ZUK. I'll send ypu links ASAP. You can find them for yourself if ypu are in a hurry in xda site. don't worry you'll revive it!!
Click to expand...
Click to collapse
I have got QFIL and ZUI ROM
But when I'm press the buttons sound and Plug the charger does not appear in QFIL
alhoaoy said:
I have got QFIL and ZUI ROM
But when I'm press the buttons sound and Plug the charger does not appear in QFIL
Click to expand...
Click to collapse
try and follow these steps:
After you installed QPST, you will get a bunch of programs associated to it, start QFIL from the QPST folder
Click browse on the programmer path row and select prog_emmc_firehose_8974.mbn from the directory where you unzipped the QPST ZUI ROM
and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone,
you may need to select port in the QFIL program and be quick with it, took me a few tries before I got it right so just take out the cable
and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal.
If everything went well then you should have ZUI loaded onto your phone and you are met with Chinese language as default.
On the first screen you are met with, just press the button in the bottom (on screen), then press cogwheel (which is the settings),
scroll down to yet another cogwheel in here which should be below a lock icon, then press second option in here and then the top option
to change language to english incase you cant make out the chinese and you should be good to go
Nikosstamatiou said:
try and follow these steps:
After you installed QPST, you will get a bunch of programs associated to it, start QFIL from the QPST folder
Click browse on the programmer path row and select prog_emmc_firehose_8974.mbn from the directory where you unzipped the QPST ZUI ROM
and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone,
you may need to select port in the QFIL program and be quick with it, took me a few tries before I got it right so just take out the cable
and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal.
If everything went well then you should have ZUI loaded onto your phone and you are met with Chinese language as default.
On the first screen you are met with, just press the button in the bottom (on screen), then press cogwheel (which is the settings),
scroll down to yet another cogwheel in here which should be below a lock icon, then press second option in here and then the top option
to change language to english incase you cant make out the chinese and you should be good to go
Click to expand...
Click to collapse
Thank you for helping me
Unfortunately it did not succeed to restore device
If you get this rom cm-12.1-YOG4PAS3OH-ham-signed factory With the existence of these files inside
prog_emmc_firehose_8974.mbn
xml file + the other patch
alhoaoy said:
Thank you for helping me
Unfortunately it did not succeed to restore device
If you get this rom cm-12.1-YOG4PAS3OH-ham-signed factory With the existence of these files inside
prog_emmc_firehose_8974.mbn
xml file + the other patch
Click to expand...
Click to collapse
Did you follow the steps as described?
Was your ZUK totally bricked or not?
Mine couldn't even boot into recovery. I had a constant bootloop lasting less than a second. But I saved it.
Do you want to tell me more?
Nikosstamatiou said:
Did you follow the steps as described?
Was your ZUK totally bricked or not?
Mine couldn't even boot into recovery. I had a constant bootloop lasting less than a second. But I saved it.
Do you want to tell me more?
Click to expand...
Click to collapse
The device was on the official rom YOG4PAS3OH
because of a network problem is not solved by format
I was setup Old official rom by the official recovery
then became when running show zuk sign and then resrart and stay that way
I messed up my Yoga 2 1050 by trying to load an unlocked boot image from here (http://forum.xda-developers.com/thi...-tab-2-unlocking-daaa-deee-daaa-dooo-t3241260), I have tried using the Phone flash tool with the correct file but it fails at 50%, here is the log attached if anyone can help.
When I first power on a message EFILINK ERROR(image -start-partition 596This partition does not appear to contain a boot image shows up.
Thanks
corasman said:
I messed up my Yoga 2 1050 by trying to load an unlocked boot image from here (http://forum.xda-developers.com/thi...-tab-2-unlocking-daaa-deee-daaa-dooo-t3241260), I have tried using the Phone flash tool with the correct file but it fails at 50%, here is the log attached if anyone can help.
When I first power on a message EFILINK ERROR(image -start-partition 596This partition does not appear to contain a boot image shows up.
Thanks
Click to expand...
Click to collapse
so you got your un-repairable tab back from lenovo
as a reminder, when you attempted to unlock the bootloader instead of the correct fastboot flash ESP 1050f-esp-patched you did a fastboot flash boot 1050f-esp-patched so instead of flashing you ESP partition you flashed the boot one with a (incompatible) ESP image, resulting, of course, in a bricked tab (as now the boot partition contains no valid image to be booted)
as advised, what you did to fix is fine (ie flashing back a stock rom), but you must use this Intel Phone Flash Tool (uninstall your existing one then install the new one) because the one you are using will not complete to flash a lollipop stock rom
Thanks ionioni
I did as you said, removed the old phone flash and installed the "lite" version.
I have run the new one and unfortunately it failed, it seems when the command for 25 second sleep is issued the tablet is taken out of fastboot as the screen shows the android system recovery page then.
I have enclosed the log file.
corasman said:
Thanks ionioni
I did as you said, removed the old phone flash and installed the "lite" version.
I have run the new one and unfortunately it failed, it seems when the command for 25 second sleep is issued the tablet is taken out of fastboot as the screen shows the android system recovery page then.
I have enclosed the log file.
Click to expand...
Click to collapse
when installed the new intel phone tool you must leave the dnx driver checked, install also the other file intelandroiddrv....exe, reboot and try again
if still not working try to flash a kitkat rom (have you restored the bios somehow?)
ionioni said:
when installed the new intel phone tool you must leave the dnx driver checked, install also the other file intelandroiddrv....exe, reboot and try again
if still not working try to flash a kitkat rom (have you restored the bios somehow?)
Click to expand...
Click to collapse
O.K. I'll do as you say
No I have not touched the bios
corasman said:
O.K. I'll do as you say
No I have not touched the bios
Click to expand...
Click to collapse
yeah, i read both logs and you should focus on (re)installing the Phone Flash Tool and drivers (first uninstall the existing and the drivers related and reboot)
ionioni said:
yeah, i read both logs and you should focus on (re)installing the Phone Flash Tool and drivers (first uninstall the existing and the drivers related and reboot)
Click to expand...
Click to collapse
Thank you for your help ionioni, it seems that I have really messed this one up.
I'll try again in the morning and see if I have better luck then.
corasman said:
Thank you for your help ionioni, it seems that I have really messed this one up.
I'll try again in the morning and see if I have better luck then.
Click to expand...
Click to collapse
it's not that hard, come on...
1. uninstall the existing Phone Flash Tool(nvm that you already installed the new one) and the drivers associated from Add/Remove programs and reboot
2. install the new Intel Phone Flash tool and the driver from the zip file linked (unplug the tab from usb before installing), to be sure also install at the end the DnX driver attached (this step is normally not needed as it should be automatically installed when the new Intel Phone Flash tool installation is run)
3. flash using the lollipop stock rom (the one you used so far with (L) at end is ok)
10 minutes for all these operations
I can confirm that information. Today I was installing new rom, and have problem with uploading data. I've installed newer version of Phone Flash Tool LITE instead of classic PFT, and DNx driver and it works good for me
O.K you talked me into it.
Just to be different I tried to do it on my Daughters laptop,and it still failed, it just seems to take it out of fastboot within a second or two of starting.
corasman said:
I tried to do it on my Daughters laptop,and it still failed, it just seems to take it out of fastboot within a second or two of starting.
Click to expand...
Click to collapse
if it fails again, attach the log from the Intel Phone Flash Tool and also detail what is the tab doing during these operations
O.K
I have fresh installed the "lite" tool and all the drivers including the DnX one.
The yoga is put into fastboot by pressing volume up and down together while powering on, this shows fastboot starting,then connect to laptop(tried on two different ones)start "lite" tool and load XML (also tried starting tool before connecting Yoga) file from same folder as files are in, press start to flash and within a second or two the screen on the Yoga change to the Android System Recovery screen and thats how it stays.
The attached log is from my Daughters Laptop.
corasman said:
O.K
I have fresh installed the "lite" tool and all the drivers including the DnX one.
The yoga is put into fastboot by pressing volume up and down together while powering on, this shows fastboot starting,then connect to laptop(tried on two different ones)start "lite" tool and load XML (also tried starting tool before connecting Yoga) file from same folder as files are in, press start to flash and within a second or two the screen on the Yoga change to the Android System Recovery screen and thats how it stays.
The attached log is from my Daughters Laptop.
Click to expand...
Click to collapse
try and start your tab in normal fastboot mode (from the recovery console select 'reboot to bootloader' or use from power off the combo keys Pwr & Vol+ or Pwr & vol- one of these two should bring you to the Fastboot/Droidboot menu) and from there tell me what the ifwi entry says... BLADE_21....
ionioni said:
try and start your tab in normal fastboot mode (from the recovery console select 'reboot to bootloader' or use from power off the combo keys Pwr & Vol+ or Pwr & vol- one of these two should bring you to the Fastboot/Droidboot menu) and from there tell me what the ifwi entry says... BLADE_21....
Click to expand...
Click to collapse
BOOTLOADER VERSION -
IFWI VERSION- Blade_21.86c.004.R23.1504091154 FFD8_IA32_R
SIGNING - ?
SECURE_BOOT - ?
E: No valid installer medium found
corasman said:
BOOTLOADER VERSION -
IFWI VERSION- Blade_21.86c.004.R23.1504091154 FFD8_IA32_R
SIGNING - ?
SECURE_BOOT - ?
E: No valid installer medium found
Click to expand...
Click to collapse
ok, somehow your bios is (still) a kitkat version (sure you didn't restored the bios using the restore bios tool? or lenovo did? nvm anyways)
you need to flash the kitkat stock rom, use this one (you can use the already installed lite flashing tool, no need to reinstall anything, just download and extract the stock rom and flash from dnx mode). after that remember to configure your region code and then you can update to lollipop using OTA's (don't flash the lollipop rom as this is only to be used after you have already updated to lollipop using OTA's and you need a fresh lollipop over your existing one)
ionioni said:
ok, somehow your bios is (still) a kitkat version (sure you didn't restored the bios using the restore bios tool? or lenovo did? nvm anyways)
you need to flash the kitkat stock rom, use this one (you can use the already installed lite flashing tool, no need to reinstall anything, just download and extract the stock rom and flash from dnx mode). after that remember to configure your region code and then you can update to lollipop using OTA's (don't flash the lollipop rom as this is only to be used after you have already updated to lollipop using OTA's and you need a fresh lollipop over your existing one)
Click to expand...
Click to collapse
I will do that, the download seems very slow though at the moment, I'll let you know how it goes.
corasman said:
I will do that, the download seems very slow though at the moment, I'll let you know how it goes.
Click to expand...
Click to collapse
will be fine, you had a kitkat bios and everything choked right from the start (remember that the bios must match the rom you re/install, so for eg if you have kitkat on your tab don't flash a lollipop rom or the other way around, as this will not upgrade/downgrade the bios too and you will get unexpected behavior or bricks, to upgrade to lollipop from kitkat use ota's and after you are on lollipop you can flash a lollipop stock rom if needed sometime)
I now have Droidboot Provision OS
with selection of
Reboot
RebootDroidboot
Recovery
SPupdate
Power off
which do I choose
corasman said:
I now have Droidboot Provision OS
with selection of
Reboot
RebootDroidboot
Recovery
SPupdate
Power off
which do I choose
Click to expand...
Click to collapse
what were the steps you performed? normally that one is the screen that the tab is showing during the flashing yet you must see some activity on the Intel Flash Tool log window and in the bottom of your tab screen. if you see it the it's ok and just wait for it to finish, if not then you must start your tab in DnX mode (screen saying "Fastboot starting...") then load flash.xml from the extracted kitkat stock rom in Intel Phone Flash Tool and "Start flashing"
ionioni said:
what were the steps you performed?
you must start your tab in DnX mode (screen saying "Fastboot starting...") then load flash.xml from the extracted kitkat stock rom in Intel Phone Flash Tool and "Start flashing"
Click to expand...
Click to collapse
Something has worked
I am now at a screen to set the Language and region ,but it will not move on.
I accidently wiped my whole phone, so there is nothing on it. So NO OS at all
How do i get the phone working??? TWRP is still on! cannot install stock rom
please help me....:crying:
zenn66 said:
I accidently wiped my whole phone, so there is nothing on it. So NO OS at all
How do i get the phone working??? TWRP is still on! cannot install stock rom
please help me....:crying:
Click to expand...
Click to collapse
1. First do you know what rom version you where on?, if you do know download that rom then extract from it the stock recovery using Huawei Update Extractor .
2. If there is two files of recovery just choose one, the one without any numbers. So you will have RECOVERY.img file.
3. Now make sure all files needed to recognize your phone are installed and adb is installed too. What you will need now is to push the RECOVERY.img file to the phone.
4. Connect the device to the computer and Put the RECOVERY.img file inside the folder where fastboot.exe is located. Then hold shift and right click to open CMD(command prompt) from there. Once CMD is open run the following code:
adb devices (This will show if your device is connected)
adb reboot bootloader (will reboot the device in bootloader mode)
fastboot devices
fastboot flash recovery RECOVERY.img
5. After this take the rom which you extracted the recovery from and put it in the memory card (dload folder)
6. When phone is OFF hold (volume up + volume down+ power key) together until you see Huawei startup logo then release. The flash process of the rom should start.
Rashad83 said:
1. First do you know what rom version you where on?, if you do know download that rom then extract from it the stock recovery using Huawei Update Extractor .
2. If there is two files of recovery just choose one, the one without any numbers. So you will have RECOVERY.img file.
3. Now make sure all files needed to recognize your phone are installed and adb is installed too. What you will need now is to push the RECOVERY.img file to the phone.
4. Connect the device to the computer and Put the RECOVERY.img file inside the folder where fastboot.exe is located. Then hold shift and right click to open CMD(command prompt) from there. Once CMD is open run the following code:
adb devices (This will show if your device is connected)
adb reboot bootloader (will reboot the device in bootloader mode)
fastboot devices
fastboot flash recovery RECOVERY.img
5. After this take the rom which you extracted the recovery from and put it in the memory card (dload folder)
6. When phone is OFF hold (volume up + volume down+ power key) together until you see Huawei startup logo then release. The flash process of the rom should start.
Click to expand...
Click to collapse
I am @work now so I will return after work .... I hope it will work
Do I have to install ADB on phone or on computer?
Thank you in advance.... I am a noob so hope this explanation works for me
zenn66 said:
I am @work now so I will return after work .... I hope it will work
Do I have to install ADB on phone or on computer?
Thank you in advance.... I am a noob so hope this explanation works for me
Click to expand...
Click to collapse
Make sure to install Hisuite app on the pc to get all huawei needed drivers , regarding ADB it is installed on the PC you can refer to this website. Before attempting anything please do read up about adb and how to flash files, because many things can go wrong.
Rashad83 said:
Make sure to install Hisuite app on the pc to get all huawei needed drivers , regarding ADB it is installed on the PC you can refer to this website. Before attempting anything please do read up about adb and how to flash files, because many things can go wrong.
Click to expand...
Click to collapse
TWRP can fash img files too..... Why is that not to be done? ??? why using ADB?
HI suite is on my pc already....
zenn66 said:
TWRP can fash img files too..... Why is that not to be done? ??? why using ADB?
HI suite is on my pc already....
Click to expand...
Click to collapse
No you need ADB to flash the stock recovery Twrp can't remove it self.
I am able to get stock recovery back in my Phone! .... so? than what?
my last working rom was B029.....
Sorry to be a noob.... ( not completely)
I never tried to put B029 recovery img on my Phone....
zenn66 said:
I am able to get stock recovery back in my Phone! .... so? than what?
my last working rom was B029.....
Sorry to be a noob.... ( not completely)
Click to expand...
Click to collapse
Follow the instructions i stated earlier. Put the rom the dload folder( inside it Update.app) in sdcard and flash it by turning off the phone and then hold( volume up+volume down + power) at the same time to begin the flash process or read the pdf file that comes with the rom after you unzip it.
:good: As soon as i got home i'll try! Thank you so much Rashad!:angel:
zenn66 said:
:good: As soon as i got home i'll try! Thank you so much Rashad!:angel:
Click to expand...
Click to collapse
i screwed up!!! fastboot/rescue mode Shows error!
recovery image failed!
so i cannot get into my phone... pc says waiting for device....:crying::crying: now what?
phone cannot be turned off!
OMG!!!
zenn66 said:
i screwed up!!! fastboot/rescue mode Shows error!
recovery image failed!
so i cannot get into my phone... pc says waiting for device....:crying::crying: now what?
phone cannot be turned off!
OMG!!!
Click to expand...
Click to collapse
Try to flash the stock recovery like the way i mentioned. Turn off the device by holding the power until it powers off and remove any usb connections to the pc. Then hold volume down and connect the usb to the pc until you see fastboot mode come up. After that enter the code i gave to flash the stock recovery and then follow the rest of the instructions.
I got the recovery into my phone. But i cannot get in to fastboot again... The screen i took pic is popping up.....
zenn66 said:
I got the recovery into my phone. But i cannot get in to fastboot again... The screen i took pic is popping up.....
Click to expand...
Click to collapse
Did you try to flash the rom from sd card.
I get into huawei erecovery... Than software is installing and stops at 90%....
zenn66 said:
I get into huawei erecovery... Than software is installing and stops at 90%....
Click to expand...
Click to collapse
You sure that the rom you are installing is the same before you formatted it?. Try a previous rom.
I was on b29.... Then i flashed till b209 than all the problems began..... How do i get into fastboot /rescue mode? Any solution?
zenn66 said:
I was on b29.... Then i flashed till b209 than all the problems began..... How do i get into fastboot /rescue mode? Any solution?
Click to expand...
Click to collapse
To enter the fastboot mode disconnect the phone from the PC. Shut it down by holding power until it's off. Then hold volume down and connect the phone to the PC at the same time.
It won't shut down.. Just restart. .. I will get in screen were you can wipe cache and do fatory reset and reboot. But no shutdown.... Sorry for all these questions. Thank you so much for all the help! ?
zenn66 said:
It won't shut down.. Just restart. .. I will get in screen were you can wipe cache and do fatory reset and reboot. But no shutdown.... Sorry for all these questions. Thank you so much for all the help!
Click to expand...
Click to collapse
First thing do a factory reset. after that keep holding the power button for like 2 mins it will power off. Then do what i mentioned earlier.
Rashad83 said:
First thing do a factory reset. after that keep holding the power button for like 2 mins it will power off. Then do what i mentioned earlier.
Click to expand...
Click to collapse
Its not shutting down.... tried the thing you said :crying:
Help me please, my phone bricked. Can't boot to download mode by holding on volume (+) & power button. Can boot to twrp via minimal fastboot with command "fastboot boot twrp.img" , but always failed when install stock or custom ROM via twrp.
Sometimes reboot when installing process & sometimes installation success but when I wanna reboot to system always show "NO OS INSTALLED"
use this command to permanently flash recovery:
fastboot flash recovery recovery.img
Sent from my Lenovo A6000 Plus
shivamgupta1996 said:
use this command to permanently flash recovery:
fastboot flash recovery recovery.img
Sent from my Lenovo A6000 Plus
Click to expand...
Click to collapse
Not work.
My phone is blinking on lenovo splash logo.
If you are on kitkat based rom then flash kitkat compatible recovery (links in ED300's post)
Sent from my Lenovo A6000 Plus
shivamgupta1996 said:
If you are on kitkat based rom then flash kitkat compatible recovery (links in ED300's post)
Sent from my Lenovo A6000 Plus
Click to expand...
Click to collapse
Not work, still blinking
Any solutions
follow this steps https://devs-lab.com/how-to-unbrick-...kat-4-4-4.html
but in step 3 and 4 you can juste witch off your device. Press & Hold Vol Down+Power+Home. and connect your cable before clic in dowload in QcomDloader.exe.. good luck
has this been solved?
Nope
Sent from my Redmi 4 using XDA-Developers Legacy app
thegreatdead69 said:
has this been solved?
Click to expand...
Click to collapse
Nope. My phone still bricked. Must change eMMC unit.
#DzikraStore
Visit us on:
- www.dzikr.tk
- www.facebook.com/DzikraStore
- www.tokopedia.com/DzikraStore
DzikrRully said:
Help me please, my phone bricked. Can't boot to download mode by holding on volume (+) & power button. Can boot to twrp via minimal fastboot with command "fastboot boot twrp.img" , but always failed when install stock or custom ROM via twrp.
Sometimes reboot when installing process & sometimes installation success but when I wanna reboot to system always show "NO OS INSTALLED"
Click to expand...
Click to collapse
press and hold volume + & - and power together
bro did lenovo logo shown ? if yes you can reflsh by downloader to flash stock rom
just when your device is of hold vol+ and vol- then connect the usb the happy flashing
somnath pal said:
press and hold volume + & - and power together
Click to expand...
Click to collapse
Aaron Turkman said:
bro did lenovo logo shown ? if yes you can reflsh by downloader to flash stock rom
just when your device is of hold vol+ and vol- then connect the usb the happy flashing
Click to expand...
Click to collapse
The eMMC must be change. So I can't flash.
DzikrRully said:
The eMMC must be change. So I can't flash.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B34wF54njvwdQzdBMEp1dHBzMVk/view?usp=drivesdk
Check dis URL. Flash required. Instruction also inside.
DzikrRully said:
Help me please, my phone bricked. Can't boot to download mode by holding on volume (+) & power button. Can boot to twrp via minimal fastboot with command "fastboot boot twrp.img" , but always failed when install stock or custom ROM via twrp.
Sometimes reboot when installing process & sometimes installation success but when I wanna reboot to system always show "NO OS INSTALLED"
Click to expand...
Click to collapse
You are using wrong command.. Command is " fastboot flash recovery (filename).img " and in your case it must be : 'fastboot flash recovery twrp.img'
I too had the same problem and I fixed it by Flashing CMW Recovery through Minimal ADB and Fastboot
rule breaker sarath said:
https://drive.google.com/file/d/0B34wF54njvwdQzdBMEp1dHBzMVk/view?usp=drivesdk
Check dis URL. Flash required. Instruction also inside.
Click to expand...
Click to collapse
Thanks. It's work
DzikrRully said:
Thanks. It's work
Click to expand...
Click to collapse
Where you got system.img ?
mujeebulhasan said:
Where you got system.img ?
Click to expand...
Click to collapse
All file and manual needed in that link
Follow that step by step.
rule breaker sarath said:
https://drive.google.com/file/d/0B34wF54njvwdQzdBMEp1dHBzMVk/view?usp=drivesdk
Check dis URL. Flash required. Instruction also inside.
Click to expand...
Click to collapse
Can I use this Recovery. img file instead of installing other recoverys???
Hello all, I have a Lenovo a6000 smartphone. It was owned by my friend. She had a problem with the android os, so she went to a local store and the there it got hard bricked. Now if I turn it on it only vibrates once. no backlight or any picture. If I press and hold vol- and power buttons together LCD backlight turns on but no display. then it goes off and then again turns on. PC does not detect it. Can anyone help me getting it out from this state?
arnab8820 said:
Hello all, I have a Lenovo a6000 smartphone. It was owned by my friend. She had a problem with the android os, so she went to a local store and the there it got hard bricked. Now if I turn it on it only vibrates once. no backlight or any picture. If I press and hold vol- and power buttons together LCD backlight turns on but no display. then it goes off and then again turns on. PC does not detect it. Can anyone help me getting it out from this state?
Click to expand...
Click to collapse
Try qfil method
JovanSijacki said:
Try qfil method
Click to expand...
Click to collapse
Can you give the link please..... please note the phone is no longer detected in pc
arnab8820 said:
Can you give the link please..... please note the phone is no longer detected in pc
Click to expand...
Click to collapse
You need to have adb and fastboot drivers for your phone to correctly get detected.
Here's the LINK FOR QFIL TUTORIAL. You'll need another set of drivers called as the QCOM drivers which are mentioned in the tutorial from the above link.
Hope this helps.
I already have installed the drivers. Still not detected. Even the device manager does not show a device is connected
sasukay said:
You need to have adb and fastboot drivers for your phone to correctly get detected.
Here's the LINK FOR QFIL TUTORIAL. You'll need another set of drivers called as the QCOM drivers which are mentioned in the tutorial from the above link.
Hope this helps.
Click to expand...
Click to collapse
Here the phone connects in Qualcomm hs-USB...... mode. But in case of mine, it does not even show up in the device manager.
arnab8820 said:
Here the phone connects in Qualcomm hs-USB...... mode. But in case of mine, it does not even show up in the device manager.
Click to expand...
Click to collapse
You should try changing the usb cable you are using. Or maybe that guy in the local repair shop didn't put the sub PCB board back correctly.
sasukay said:
You should try changing the usb cable you are using. Or maybe that guy in the local repair shop didn't put the sub PCB board back correctly.
Click to expand...
Click to collapse
There is only one pcb in it. Changing the cable does not make a difference
One update. I can get into the fastboot mode. But the bootloader is locked. What to do?
arnab8820 said:
One update. I can get into the fastboot mode. But the bootloader is locked. What to do?
Click to expand...
Click to collapse
Lenovo A6000 doesn't come with a locked bootloader B-l
If you can boot into fastboot then you should flash twrp from it depending on the current android version of the device. If it had been on kitkat flash this TWRP v2.8.6.0 or if it has been updated to lollipop then flash the latest TWRP v3.1.0.
For this you need to first have the fastboot drivers installed and also the minimal adb and fastboot tool. Then place the required TWRP in that folder, better rename the file to 'recovery.img' and then in the CMD window which you open by Shift + Right Click first type
Code:
fastboot devices
To check whether your device is detected by the tool and haa got drivers installed correctly.
Later, if successful, type in
Code:
fastboot flash recovery recovery.img
Then you'll have TWRP recovery installed.
Then flash any ROM on the device using it.
sasukay said:
Lenovo A6000 doesn't come with a locked bootloader B-l
If you can boot into fastboot then you should flash twrp from it depending on the current android version of the device. If it had been on kitkat flash this TWRP v2.8.6.0 or if it has been updated to lollipop then flash the latest TWRP v3.1.0.
For this you need to first have the fastboot drivers installed and also the minimal adb and fastboot tool. Then place the required TWRP in that folder, better rename the file to 'recovery.img' and then in the CMD window which you open by Shift + Right Click first type
To check whether your device is detected by the tool and haa got drivers installed correctly.
Later, if successful, type in
Then you'll have TWRP recovery installed.
Then flash any ROM on the device using it.
Click to expand...
Click to collapse
Thanks! I will try it and post the results.
Btw are you sure it does not come with a locked bootloader? I tried to flash the stock recovery and got an error saying "unknown command or device is lock"
arnab8820 said:
Thanks! I will try it and post the results.
Btw are you sure it does not come with a locked bootloader? I tried to flash the stock recovery and got an error saying "unknown command or device is lock"
Click to expand...
Click to collapse
Yeah bro I'm 100% positive. I think unknown command is displayed when you flash the wrong version of recovery.
You can also try
Code:
fastboot boot recovery.img
Sometimes only this works which temporarily boots into the custom recovery.
sasukay said:
Yeah bro I'm 100% positive. I think unknown command is displayed when you flash the wrong version of recovery.
You can also try
Sometimes only this works which temporarily boots into the custom recovery.
Click to expand...
Click to collapse
Ok friend i will post the results tonight
sasukay said:
Lenovo A6000 doesn't come with a locked bootloader B-l
If you can boot into fastboot then you should flash twrp from it depending on the current android version of the device. If it had been on kitkat flash this TWRP v2.8.6.0 or if it has been updated to lollipop then flash the latest TWRP v3.1.0.
For this you need to first have the fastboot drivers installed and also the minimal adb and fastboot tool. Then place the required TWRP in that folder, better rename the file to 'recovery.img' and then in the CMD window which you open by Shift + Right Click first type
Code:
fastboot devices
To check whether your device is detected by the tool and haa got drivers installed correctly.
Later, if successful, type in
Code:
fastboot flash recovery recovery.img
Then you'll have TWRP recovery installed.
Then flash any ROM on the device using it.
Click to expand...
Click to collapse
Tried the above method but no luck it gives an error: "unknown command or device is lock".
arnab8820 said:
Tried the above method but no luck it gives an error: "unknown command or device is lock".
Click to expand...
Click to collapse
Try this with the CWM recovery too.
BTW does your device gets detected by fastboot devices command? Also, have you tried the QPST method?
sasukay said:
Try this with the CWM recovery too.
BTW does your device gets detected by fastboot devices command? Also, have you tried the QPST method?
Click to expand...
Click to collapse
Device gets detected by fastboot devices command. I cant try qpst because the device is not detected in any other mode except fastboot. I hv all the drivers installed
arnab8820 said:
Device gets detected by fastboot devices command. I cant try qpst because the device is not detected in any other mode except fastboot. I hv all the drivers installed
Click to expand...
Click to collapse
You've tried booting into Download mode? It requires you to press the VOL UP + POWER KEY, then you need to select the Download mode in it to perform flashing through QPST.
Also, you never mentioned what android version was the device on, earlier.
sasukay said:
You've tried booting into Download mode? It requires you to press the VOL UP + POWER KEY, then you need to select the Download mode in it to perform flashing through QPST.
Also, you never mentioned what android version was the device on, earlier.
Click to expand...
Click to collapse
If i press and hold vol up and power key together the phone only vibrates once and shows nothing. And i think my friend applied the lollipop update on it. She is not sure.
arnab8820 said:
If i press and hold vol up and power key together the phone only vibrates once and shows nothing. And i think my friend applied the lollipop update on it. She is not sure.
Click to expand...
Click to collapse
Try fastboot oem unlock
arnab8820 said:
Tried the above method but no luck it gives an error: "unknown command or device is lock".
Click to expand...
Click to collapse
I think you are missing something (maybe).
The command is "fastboot flash recovery recovery.img"
If the recovery files name is twrp.img then command will be "fastboot flash recovery twrp.img".