Hi everyone
Sorry for my poor english.
Some day ago i try to upgrade the a2017 to N stock(ZTE_A2017V1.1.0B17) and try to flash the xp(V88),but the phone freezing at bootanimation,and if i uninstall the xp then the phone boot normally.
Have someone succeed?or some suggest?
now i downgrade stock mm and using supersu &xp.watting for n
kurey said:
Hi everyone
Sorry for my poor english.
Some day ago i try to upgrade the a2017 to N stock(ZTE_A2017V1.1.0B17) and try to flash the xp(V88),but the phone freezing at bootanimation,and if i uninstall the xp then the phone boot normally.
Have someone succeed?or some suggest?
now i downgrade stock mm and using supersu &xp.watting for n
Click to expand...
Click to collapse
Simply flash Magisk, then install the Xposed module
It works just fine but u have to give it time to load it usually takes more than 15 mins to load, at least on my phone
the module works just fine, that doesn't happen
Choose an username... said:
Simply flash Magisk, then install the Xposed module
Click to expand...
Click to collapse
Thank you,i'll try again some day later
J0nhy said:
It works just fine but u have to give it time to load it usually takes more than 15 mins to load, at least on my phone
Click to expand...
Click to collapse
o.m.g.is it need more than 15m everytime or just the first boot?
Choose an username... said:
the module works just fine, that doesn't happen
Click to expand...
Click to collapse
it just happened âīšâ
Related
HEya GUys
Try this and tell me what happens
1. Connect ur phone to charge
2. Open ur Camera while its charging
Comment with ur PDA
Well mine is NH6 and It Completely Stops working until i reboot it
Sanjuujosephh said:
HEya GUys
Try this and tell me what happens
1. Connect ur phone to charge
2. Open ur Camera while its charging
Comment with ur PDA
Well mine is NH6 and It Completely Stops working until i reboot it
Click to expand...
Click to collapse
Bro nothing happens it works normally...
Did u face any issue..?
Mine gets stuck ?
Sanjuujosephh said:
Mine gets stuck ?
Click to expand...
Click to collapse
Try factory reset or flash the Firmware agian
Um I will wait until the next update comes ! I have rooted and I have already flashed more than 10 times and got bored of installing apps all over again !
Sanjuujosephh said:
Um I will wait until the next update comes ! I have rooted and I have already flashed more than 10 times and got bored of installing apps all over again !
Click to expand...
Click to collapse
Aroma Installer+Flashable ZIP+Nandroid.
Use that combination to backup your apps and data
I don't like restoring Bro ! I like Installing things fresh ! I don't even like using Titanium backup to restore app ?
Every once in a while, when I reboot my phone, it'll hang at the Axon logo (after the little "swoosh") for 15-20 minutes before it will completely boot up? It isn't running through the "Android is starting apps", I know to expect that when I clear the cashe or install a fresh ROM. This is just on a "Hey, I'm going to reboot my phone today".
I am rooted (for custom fonts and emoji's), no Xposed.
It doesn't happen every time, maybe 3 times over the past month.... But it always happens at the worst time (it seems).
My external SD card has about 28gb of stuff on it, could it be scanning that?
Do you use SuperSU ?
XblackdemonX said:
Do you use SuperSU ?
Click to expand...
Click to collapse
Yes
2.76
tele_jas said:
Yes
2.76
Click to expand...
Click to collapse
Using 2.76 su with Xposed, no long booting time,
Started happening when you replace fonts and emojis?
DrakenFX said:
Using 2.76 su with Xposed, no long booting time,
Started happening when you replace fonts and emojis?
Click to expand...
Click to collapse
No, that's why it's so hard to narrow down.... First time it did it, I actually had Xposed installed. I restored my TWPR backup to when I didn't flash any extra's, just the stock apps and my user apps. I let that be for a few days and it did it to me then too, so I realized my fonts and emoji's didn't make a difference, so I put them back in, but left Xposed off.
I wish I had a backup of before I installed all my apps, right after I installed TWRP, but I deleted it on accident.
tele_jas said:
Yes
2.76
Click to expand...
Click to collapse
I suspect that this could be why. Try SuperSU 2.65 like suggested in DrakenFX's post
Source: My OnePlus One takes 7 minutes to boot
Maybe you can get a logcat while it boots? We might be able to see what's happening in those 15 minutes.
dennis96411 said:
Maybe you can get a logcat while it boots? We might be able to see what's happening in those 15 minutes.
Click to expand...
Click to collapse
that is actually a good solution ,
Anyone able to create a restart menu that can restart to recovery? Have tried to do a few instructions but run into areas that do not match and it gets quite confusing for me. So anyone can assist would be great. I have a SM-T550
bobfrantic said:
Anyone able to create a restart menu that can restart to recovery? Have tried to do a few instructions but run into areas that do not match and it gets quite confusing for me. So anyone can assist would be great. I have a SM-T550
Click to expand...
Click to collapse
Did you get any PMs or figure anything out, other than Xposed and Gravitybox. That's how I get an extended reboot menus like you get in CM builds.
glockman4519 said:
Did you get any PMs or figure anything out, other than Xposed and Gravitybox. That's how I get an extended reboot menus like you get in CM builds.
Click to expand...
Click to collapse
Haven't received any information at all. I did attempt to do it from this Post but failed for some reason and my tablet wouldn't boot, just stuck on logo. Not thought of xposed module at all because I would think it would act as a third party app. Those do not get along well with the TWRP 3.0.2-1 recovery by @ashyx. If you use 3rd party app to reboot to recovery with that version, you'll be stuck in recovery and not be able to boot to system until you reinstall the recovery with same instructions as first time you install it.
bobfrantic said:
Haven't received any information at all. I did attempt to do it from this Post but failed for some reason and my tablet wouldn't boot, just stuck on logo. Not thought of xposed module at all because I would think it would act as a third party app. Those do not get along well with the TWRP 3.0.2-1 recovery by @ashyx. If you use 3rd party app to reboot to recovery with that version, you'll be stuck in recovery and not be able to boot to system until you reinstall the recovery with same instructions as first time you install it.
Click to expand...
Click to collapse
I'm using TWRP 2.8.7.0 by @ashyx and I use the reboot function in Gravitybox and it is working just fine for me with no bootloops. I will look into how to add the reboot function into the rom and see if I come up with anything and if I do, I will be sure to let you know.
I tried @ashyx 2.8.7 twrp but touches were way out of line so had to go back to 3.0.2 recovery. I think it has to do with the MM 6.0.1 firmware.
Sent from my S4 via NSA wifi
glockman4519 said:
I'm using TWRP 2.8.7.0 by @ashyx and I use the reboot function in Gravitybox and it is working just fine for me with no bootloops. I will look into how to add the reboot function into the rom and see if I come up with anything and if I do, I will be sure to let you know.
Click to expand...
Click to collapse
By the wy what tab you have? What firmware also?
Sent from my S4 via NSA wifi
bobfrantic said:
By the wy what tab you have? What firmware also?
Click to expand...
Click to collapse
I have the t350 and am on my rom 6.0.1 latest firmware release. I forgot that yours is a different dsvice and may not function ghe same as mine.
glockman4519 said:
I have the t350 and am on my rom 6.0.1 latest firmware release. I forgot that yours is a different dsvice and may not function ghe same as mine.
Click to expand...
Click to collapse
yea that may be the reason the 2.8.7 doesn't like my tab being it's T550. you should make your rom work on the 550 hehehe
bobfrantic said:
yea that may be the reason the 2.8.7 doesn't like my tab being it's T550. you should make your rom work on the 550 hehehe
Click to expand...
Click to collapse
If I had that device for testing I would. I would hate to make something that would screw up someone's device. If its mine, I dont care but not on someone else's.
If it is rooted, give this a try.
https://play.google.com/store/apps/details?id=simple.reboot.com
hectorbls said:
If it is rooted, give this a try.
https://play.google.com/store/apps/details?id=simple.reboot.com
Click to expand...
Click to collapse
I use Simple Reboot for now. Still holding out hope someone can make a restart menu. :cyclops:
A+ for simple reboot, been using it on a few different androids and no problems.
Well I have no problem flashing stock rom back, but everytime I flash TWRP it seems to just want to go in a bootloop. I have G928R4 USC on 7.0, every time I restart the phone it just bootloops. I can access TWRP but when I reboot it pulls that crap -_- Please help. Thank you
Tokumei no said:
Well I have no problem flashing stock rom back, but everytime I flash TWRP it seems to just want to go in a bootloop. I have G928R4 USC on 7.0, every time I restart the phone it just bootloops. I can access TWRP but when I reboot it pulls that crap -_- Please help. Thank you
Click to expand...
Click to collapse
You use the latest twrp??
dizio said:
You use the latest twrp??
Click to expand...
Click to collapse
Yes on the latest twrp. Idk what the issue is.
Would it be because I'm on 7.0? Idk if that's a thing but I would assume it wouldn't be the case.
https://twrp.me/devices/samsunggalaxys6edgeplus.html
Are you using the one for your device from here?
There are 2 variants of the SM-G928R4
kdogguk said:
https://twrp.me/devices/samsunggalaxys6edgeplus.html
Are you using the one for your device from here?
There are 2 variants of the SM-G928R4
Click to expand...
Click to collapse
Yes I'm sure I'm using the right one for my device. I have never had this issue before.
Went back to twrp 3.0.2.0 and it's fine, I guess it was just the latest release that was the issue.
Wu
Root
Tokumei no said:
Well I have no problem flashing stock rom back, but everytime I flash TWRP it seems to just want to go in a bootloop. I have G928R4 USC on 7.0, every time I restart the phone it just bootloops. I can access TWRP but when I reboot it pulls that crap -_- Please help. Thank you
Click to expand...
Click to collapse
Root it first
unbelievable i did a hard reset , then clear cache , before was random reboot , now it became worse and constant boot loop ,does replugging the battery solve this issue ?
Hello, im new here so sorry in advance if i seem like a noob haha
I have a S8 with stock rom but rooted with magisk.
I have firmware AQK7 installed but would like to upgrade with flashfire to AQL5 so i keep all my data and root.
I use flashfire and select the zip file, uncheck the inject supersu, add to flash magisk v15.0 zip and start to flash.
The screen just turns black and the phone just reboots and nothing has changed.
What am I doing wrong?
pls help
silverik1 said:
Hello, im new here so sorry in advance if i seem like a noob haha
I have a S8 with stock rom but rooted with magisk.
I have firmware AQK7 installed but would like to upgrade with flashfire to AQL5 so i keep all my data and root.
I use flashfire and select the zip file, uncheck the inject supersu, add to flash magisk v15.0 zip and start to flash.
The screen just turns black and the phone just reboots and nothing has changed.
What am I doing wrong?
pls help
Click to expand...
Click to collapse
Its probably starting to flash. The screen for some devices is VERY dim while doing flashfire flashes and can look like its off. Take it into a dark room and check.
Although if you have g950f why not just use twrp?
Its not a dark screen....it just reboots.
And if I use twrp do I keep my data?
Sorry im a rookie at this.
Learning fast but still....
silverik1 said:
Its not a dark screen....it just reboots.
And if I use twrp do I keep my data?
Sorry im a rookie at this.
Learning fast but still....
Click to expand...
Click to collapse
Nobody???
I guess if nobody knows its not possible???:crying:
silverik1 said:
Nobody???
I guess if nobody knows its not possible???:crying:
Click to expand...
Click to collapse
Use titanium backup on the playstore to backup all your apps incase somthing happens.
silverik1 said:
Its not a dark screen....it just reboots.
And if I use twrp do I keep my data?
Sorry im a rookie at this.
Learning fast but still....
Click to expand...
Click to collapse
Same thing happens for me, buddy. Sadly I haven't found out why.
amon-san said:
Same thing happens for me, buddy. Sadly I haven't found out why.
Click to expand...
Click to collapse
Are you sure the screen isn't just really dim? That's a known issue with flashfire, especially older versions and older roms
partcyborg said:
Are you sure the screen isn't just really dim? That's a known issue with flashfire, especially older versions and older roms
Click to expand...
Click to collapse
no, i know how it should look like because it worked fine on another device.
there is was rather dim but legible. took quite a lot of time to finish.
on my new device it really just quickly rebooted without doing any work.
amon-san said:
no, i know how it should look like because it worked fine on another device.
there is was rather dim but legible. took quite a lot of time to finish.
on my new device it really just quickly rebooted without doing any work.
Click to expand...
Click to collapse
I finally got it working using magisk v14 instead of v15.
Works great with v14.