I have been able to install twrp and get root on my galaxy tab e t377w but I am wondering if there is any way to install xposed
Method
Which method and TWRP version did you use? I have been unable to root my T377W after many attempts.
lictus said:
Which method and TWRP version did you use? I have been unable to root my T377W after many attempts.
Click to expand...
Click to collapse
Ey, I just got root running using this method: https://forum.xda-developers.com/android/development/recovery-official-twrp-gteslte-galaxy-t3419219
Please note that you must verify your chipset first. Download Droid Info from the Play Store and go to the "system" tab. Under CPU architecture it should say board/chipset. You want to verify that you have the Exynos chipset. Verify that board/chipset is an Exynos type chipset thorugh google. (How to: Mine says universal3475, I typed '3475 qualcomm vs exynos' into google, results show 3475 is Exynos, 410 is Snapdragon equivelant, I have Exynos so I can continue. If you have a Snapdragon/Qualcomm version, this will not work for you, stop here.)
Do note that the key combination may be different to get into recovery/download. I have the T377T myself (this tutorial should work for T377W as well). For me it was like this -
Home + Up + Power --> Recovery mode
Home + Down + Power --> Download mode
When you do the Odin step, you MUST hold the combo for Recovery mode as soon as you hit start because it happens quick. If you miss this step you will have to start over because your OS will rewrite the stock recovery back over your newly flashed TWRP recovery. Do not be alarmed if you mess this up and your tablet throws an error about a corrupted partition, you can factory reset to get it up and running again (w/out root), then start over.
Once you have TWRP up and running you can go ahead and flash SuperSU and achieve root. Hope this helps.
So far as Xposed goes: https://www.xda-developers.com/official-xposed-framework-android-nougat/
Can I put LineageOS on my Galaxy S5 using SafeStrap? If not, would Odin do the trick instead?
What, if anything, do I need to do to maintain root?
Do I need to unlock the bootloader before flashing the ROM?
Do the steps in the above link work on unlocking the verizon bootloader or will I make a brick?
If there's a link to getting LineageOS onto my Verizon S5 while keeping root please point me in the right direction. Thank you.
androidman807 said:
Can I put LineageOS on my Galaxy S5 using SafeStrap? If not, would Odin do the trick instead?
What, if anything, do I need to do to maintain root?
Do I need to unlock the bootloader before flashing the ROM?
Do the steps in the above link work on unlocking the verizon bootloader or will I make a brick?
If there's a link to getting LineageOS onto my Verizon S5 while keeping root please point me in the right direction. Thank you.
Click to expand...
Click to collapse
you first need to root then unlock bootloader then install twrp then flash Lineage and Gapps and your all set , all information regarding how to root and unlock bootloader are in the vzw section , do make a full back up of your sdcard(micro sd card) to your computer because unlocking the bootloader will wipe/format your memory card(keep that in mind)
also i suggest you update your modem and bootloader , just in case you would like to test the ported rom which most of them run on a higher bootloader and with a old bootloader you will face issues with wifi and nav buttons specially with the vzw variant (i also have a vzw) , update it to i think the highest so far by @jrkruze is qf2 , for example the skiesrom (a s8 port) runs on a qf5 bootloader but updating vzw bootloader to qf2 fixes the wifi and nav button bugs.
Good Luck and also do properly read the instructions word for word.
I'm so grateful for your response. You've been down this road and know the traps. I believe my original post has the right thread on unlocking the bootloader for vzw, and I appreciate the warning about it erasing the micro-sd card.
Two follow-up questions:
Where can I find the update for the modem?
Also to avoid the wifi and nav problems, do I want the QF2 or QF5? And where do I find those? Here it says to use latest bootloader (QA1) with QF2 modem. Does that make sense? If so I just need to know where to find those.
Thank you again so very much.
KazuDante said:
you first need to root then unlock bootloader then install twrp then flash Lineage and Gapps and your all set , all information regarding how to root and unlock bootloader are in the vzw section , do make a full back up of your sdcard(micro sd card) to your computer because unlocking the bootloader will wipe/format your memory card(keep that in mind)
also i suggest you update your modem and bootloader , just in case you would like to test the ported rom which most of them run on a higher bootloader and with a old bootloader you will face issues with wifi and nav buttons specially with the vzw variant (i also have a vzw) , update it to i think the highest so far by @jrkruze is qf2 , for example the skiesrom (a s8 port) runs on a qf5 bootloader but updating vzw bootloader to qf2 fixes the wifi and nav button bugs.
Good Luck and also do properly read the instructions word for word.
Click to expand...
Click to collapse
androidman807 said:
I'm so grateful for your response. You've been down this road and know the traps. I believe my original post has the right thread on unlocking the bootloader for vzw, and I appreciate the warning about it erasing the micro-sd card.
Two follow-up questions:
Where can I find the update for the modem?
Also to avoid the wifi and nav problems, do I want the QF2 or QF5? And where do I find those? Here it says to use latest bootloader (QA1) with QF2 modem. Does that make sense? If so I just need to know where to find those.
Thank you again so very much.
Click to expand...
Click to collapse
The Latest bootloader (after you unlocked your current bootloader) : https://forum.xda-developers.com/showpost.php?p=73734257&postcount=3143
latest modem : https://forum.xda-developers.com/showpost.php?p=61802396&postcount=1 ( use the ones in the odin section , you will need to be bootloader unlocked and have odin+latest samsung drivers installed)
latest twrp : https://dl.twrp.me/klte/ ( the ones that ends with .tar are for flashing using odin , since you dont have twrp yet but flashing twtp comes last after rooting and unlocking bootloader and updating bootloader then update the modem then odin flash twrp then have lineageos and nougat gapps on memory card. reboot while holding vol up and home button to reboot into twrp to install lineageos system then gopengapps , afterwards you can install magisk to have root access on lineageOS as well .
p.s after you unlock bootloader and the system reboots normally return to download mode then use odin to flash twrp , i just noticed(remembered that latest bootloader update uses twrp and not safestrap recovery.
to unlock current bootloader : https://forum.xda-developers.com/showpost.php?p=71202995&postcount=3
Thank you so much. So if I understand right it's:
1) UNLOCK bootloader
2) UPDATE bootloader (latest is QF2)
3) update modem (latest tar was QI2)
4) flash TWRP from Odin (you linked to klte version; qualcomm but I have vzw)
5) install LineageOS and gapps from TWRP
6) install magisk from TWRP to get root
Is that correct?
Correct bootloader and modem versions?
OK to use klte for Verizon?
Magisk is for root, done last, and not superSu?
If all those are Yes, then I guess the prep work is done and now I just have to bite the bullet, do a safestrap and titanium backup and dive in.
Thanks again - I really do appreciate it.
KazuDante said:
The Latest bootloader (after you unlocked your current bootloader) : https://forum.xda-developers.com/showpost.php?p=73734257&postcount=3143
latest modem : https://forum.xda-developers.com/showpost.php?p=61802396&postcount=1 ( use the ones in the odin section , you will need to be bootloader unlocked and have odin+latest samsung drivers installed)
latest twrp : https://dl.twrp.me/klte/ ( the ones that ends with .tar are for flashing using odin , since you dont have twrp yet but flashing twtp comes last after rooting and unlocking bootloader and updating bootloader then update the modem then odin flash twrp then have lineageos and nougat gapps on memory card. reboot while holding vol up and home button to reboot into twrp to install lineageos system then gopengapps , afterwards you can install magisk to have root access on lineageOS as well .
p.s after you unlock bootloader and the system reboots normally return to download mode then use odin to flash twrp , i just noticed(remembered that latest bootloader update uses twrp and not safestrap recovery.
to unlock current bootloader : https://forum.xda-developers.com/showpost.php?p=71202995&postcount=3
Click to expand...
Click to collapse
androidman807 said:
Thank you so much. So if I understand right it's:
1) UNLOCK bootloader
2) UPDATE bootloader (latest is QF2)
3) update modem (latest tar was QI2)
4) flash TWRP from Odin (you linked to klte version; qualcomm but I have vzw)
5) install LineageOS and gapps from TWRP
6) install magisk from TWRP to get root
Is that correct?
Correct bootloader and modem versions?
OK to use klte for Verizon?
Magisk is for root, done last, and not superSu?
If all those are Yes, then I guess the prep work is done and now I just have to bite the bullet, do a safestrap and titanium backup and dive in.
Thanks again - I really do appreciate it.
Click to expand...
Click to collapse
yes thats correct , also there is no vzw variant of lineage since vzw is merged under klte , so every rom you download the one you have to choose is klte unless the dev make a build for each variant but not likely to happen anymore.
A very basic assumption may have been overlooked, but it seems the CID on my lollipop PB1 is 11 Toshiba eMMC. Method 2 of unlocking stopped at step 4 with an error in the terminal screen indicating this is only for Samsung eMMCs. Is it possible to unlock an 11, and if so, where would I find those steps?
KazuDante said:
yes thats correct , also there is no vzw variant of lineage since vzw is merged under klte , so every rom you download the one you have to choose is klte unless the dev make a build for each variant but not likely to happen anymore.
Click to expand...
Click to collapse
androidman807 said:
A very basic assumption may have been overlooked, but it seems the CID on my lollipop PB1 is 11 Toshiba eMMC. Method 2 of unlocking stopped at step 4 with an error in the terminal screen indicating this is only for Samsung eMMCs. Is it possible to unlock an 11, and if so, where would I find those steps?
Click to expand...
Click to collapse
sadly cid 11 cannot be unlocked , best option is to only change current S5 with another S5 and hope its a CID 15 , or sadly get another phone but check xda forum to see if it has any latest custom roms and bootloader can be unlocked.
But for CID 11 theres no unlocks for those , only thing is safestrap roms that allows you to run ports like PhoenixRom and other stock but modded roms but using safestrap
Thanks you so much again. How can I tell which ROMs are stock I can use in safestrap (like Phoenixrom) and which are custom I can't use (like LineageOS)?
And if I have a safestrap backup to my sd card of my stock lollipop and don't like phoenix (which seems to be MM) can I restore from safestrap back to my stock LL?
KazuDante said:
sadly cid 11 cannot be unlocked , best option is to only change current S5 with another S5 and hope its a CID 15 , or sadly get another phone but check xda forum to see if it has any latest custom roms and bootloader can be unlocked.
But for CID 11 theres no unlocks for those , only thing is safestrap roms that allows you to run ports like PhoenixRom and other stock but modded roms but using safestrap
Click to expand...
Click to collapse
androidman807 said:
Thanks you so much again. How can I tell which ROMs are stock I can use in safestrap (like Phoenixrom) and which are custom I can't use (like LineageOS)?
And if I have a safestrap backup to my sd card of my stock lollipop and don't like phoenix (which seems to be MM) can I restore from safestrap back to my stock LL?
Click to expand...
Click to collapse
that im not sure about that so i cant give you any pointers since i have not done anything with safestrap besides the process to unlock the bootloader.
Thanks anyway. It seems it should work, since safestrap won't disappear. Maybe I should post a new thread. Thank you again for all your time.
KazuDante said:
that im not sure about that so i cant give you any pointers since i have not done anything with safestrap besides the process to unlock the bootloader.
Click to expand...
Click to collapse
I am also essentially looking to install LineageOS on my Galaxy S5, but before proceeding, I just wanted to make sure that what I'm looking to do is correct. Currently I am running an old version of PhoenixROM with an old unlocked bootloader. I know that I will need to update the bootloader in order to prevent issues, such as wifi not working.
Should all I need to do is follow JKruse's instructions here, flashing LineageOS as the last and final step? I'm hoping that it is this easy, but I do have my doubts and that is why I am asking on here for advice.
Thank you to all in advance!
The Samsung Galaxy note 3. Apparently it's a unique device that can't install TWRP normally. I wanted to install TWRP on this variant (hltexx or hlte {not sure which}) But it won't let me so I tried a method that usually works for me on most devices. Install CWM recovery first then overinstall it with TWRP. But that method didn't work either. And now I can't boot to recovery just loops on the logo. If I take the battery out and try to boot to recovery still...same result. I can boot normally just not recovery. I tried to install odin but I accidentally locked myself in parental controls and I have no idea what the administrator password is...is there any other way to install TWRP and make it boot correctly without odin and stuff?:crying: I'm trying to get a new ROM on it cuz the current one sux it's called Dokdo project apparently and running android version 5.1.1 I hope maybe giving the ROM info helps.
What is the phone's model # in download mode?
joseph15two said:
The Samsung Galaxy note 3. Apparently it's a unique device that can't install TWRP normally. I wanted to install TWRP on this variant (hltexx or hlte
...
is there any other way to install TWRP and make it boot correctly without odin and stuff?:crying:
Click to expand...
Click to collapse
I take it you tried to use fastboot from you PC to install the recovery? Samsung phones don't support that - you have to use Odin to flash things in download mode (sort of like fastboot). You really should get your Odin working as that's the way to restore the phone back to stock if things get screwed up.
But, if you're rooted, then you can flash recovery from Terminal on the phone using the following commands:
Code:
su
dd if=<recovery.img file> of=/dev/block/mmcblk0p15
where <recovery.img file> is the actual path to the recovery image file (not the *.img.tar[/b] file).
Sent from my OnePlus3T using XDA Labs
joseph15two said:
The Samsung Galaxy note 3. Apparently it's a unique device that can't install TWRP normally. I wanted to install TWRP on this variant (hltexx or hlte {not sure which}) But it won't let me so I tried a method that usually works for me on most devices. Install CWM recovery first then overinstall it with TWRP. But that method didn't work either. And now I can't boot to recovery just loops on the logo. If I take the battery out and try to boot to recovery still...same result. I can boot normally just not recovery. I tried to install odin but I accidentally locked myself in parental controls and I have no idea what the administrator password is...is there any other way to install TWRP and make it boot correctly without odin and stuff?:crying: I'm trying to get a new ROM on it cuz the current one sux it's called Dokdo project apparently and running android version 5.1.1 I hope maybe giving the ROM info helps.
Click to expand...
Click to collapse
Are you trying to flash TWRP for Note 3 (hlte) on a Note 3 Neo (hlltexx) ?
zlazaar said:
Are you trying to flash TWRP for Note 3 (hlte) on a Note 3 Neo (hlltexx) ?
Click to expand...
Click to collapse
TWRP has an img file that supports various variants in one img file. Like the hltexx or hltkor etc are all supported by the same img file so it doesn't really matter much my problem is that TWRP doesn't install when using the universal method. So would the terminal option really work?
Most first time users flash TWRP. Tar file through Odin
What I have:
I have a Samsung J5 (2015) SM-500FN which ran out of storage and basically hung itself up. There is no data I want to recover, but I want to install either a stock ROM or (preferably) something else like Lineage - I just want to get a usable phone again.
My problem:
I have tried to download *many* stock ROM
s from reputable sources like SamMobile (for this specific phone, but trying different release dates and country codes) but every single one of those ZIPs is corrupt, even when downloading from a different computer.
Flashing with ODIN anyway gives a FAIL result and a device that cannot boot, not even into recovery: It gives a green screen with the text: `An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.`
Ironically, the Smart Switch software just says this device is not supported. The older Kies3 software lets me enter the exact model# followed by the serial# - but then it says this device is not supported. So neither Samsung software is usable, but I can still use ODIN.
Even with the phone in this broken state, I can install TWRP again. So it is not completely bricked. I boot into TWRP and copy a LineageOS ZIP file to /sdcard, but when I try to install that, the TRWP console says: `E3004: This package is for device j5nlte,j5nltexx; this device is .` Note how it doesn't appear to recognize that this device is indeed the model j5nlte!
Android.SE says that "E3004" means my TWRP is too old, but I use `twrp-3.1.1-1-j5nlte` which is currently the newest version for this phone.
I would also like to try a factory reset, but that requires the stock recovery which won't boot (see step 2 above).
My question: How do I get out of this catch-22?
It seems that if I could just get around that E3004 then I would be fine. But I have found no ways to trick the installer into ignoring that error.
Flash an updated twrp .IMG file which you can extract from the file here j5nlte (TWRP)
Just flash the img in twrp and reboot to recovery
Then with the updated twrp try flashing the rom again
garylawwd said:
Flash an updated twrp .IMG file which you can extract from the file here
Click to expand...
Click to collapse
THANK YOU! This did the trick. May I ask: what is the origin of that TRWP image? How could I have found that on my own?
torbengb said:
THANK YOU! This did the trick. May I ask: what is the origin of that TRWP image? How could I have found that on my own?
Click to expand...
Click to collapse
No problem at all, glad all is working for you now. Happens all the time with people having the wrong recovery its no big deal but a lesson learned is always make a backup in twrp before going tinckering around with things or keep a copy of a rom, that you know works, on your SD card.
From the bootleggers pie rom thread.
The Dev of that also builds his own twrp for all j5 2015 models.
he's a really great guy to have supporting our j5 community
Hi! My old phone broke and I'm trying to root another phone so I can flash a Verizon ROM to it so my SIM card will be compatible. I've tried my hand at one click root programs (which either don't support my phone or fail to fully root) and different tutorials (yet the TWRP screen never shows up when I enter Android Recovery). I have a SM-J700T1 running on Android version 7.1.1. Any advice, pointers, or guides would be greatly appreciated! Thank you!
To flash a Custom ROM on phone it's NOT required that phone's Android got rooted beforehand: All what's needed is phone's bootloader gets unlocked ( keyword: FASTBOOT ) and a working Custom Recovery like TWRP to flash the Custom ROM.