Related
Please help, I need proffessional help.
Android Phone: ASUS Zenfone 2 Laser 5.0 (ROOTED)
Android Firmware: 5.0.2 Lollipop
Aim: To enter into Fastboot mode and Recovery Mode without problems
Situation: Recently installed TWRP Recovery in-app and through software, but when I try to enter in Fastboot Mode (HOLD POWER & VOLUMEUP) or even Recovery Mode (HOLD POWER & VOLUMEDOWN), I just end up in a hanged out ASUS Logo. I can't do anything except pulling out the battery myself and putting it back then booting the device through power button to boot it normally. I don't know if it's the problem with the model, or the phone's system itself, or it's just a bug, or a problem when I rooted my device through ADB.
(Note: When I rooted the device, I wasn't even able to see the blue "FASTBOOT MODE" when I tried it, I only saw the ASUS logo as well.)
For anyone who has any idea on what's going on with my device, please reply and help me. I really want to have the benefits of a rooted phone completly and I'm a new root user so I need assistance.
For anyone who has an idea on what I've done or on what should I do, please help me. Someone told me that I flashed the recovery and locked the bootloader, so it got damaged. If so, would Unlocking the Bootloader (from Wiki.CyanogenMod's Site) help my case?
CrimsonShade09 said:
For anyone who has an idea on what I've done or on what should I do, please help me. Someone told me that I flashed the recovery and locked the bootloader, so it got damaged. If so, would Unlocking the Bootloader (from Wiki.CyanogenMod's Site) help my case?
Click to expand...
Click to collapse
Do you can acesse to twrp recovery on your device
Same problem.....waiting for helping, please
mohamedelkholy said:
Do you can acesse to twrp recovery on your device
Click to expand...
Click to collapse
I think I have "access" to TWRP recovery. However, I can only access it through booting it up from ADB. I used the command "adb reboot bootloader" to boot it to fastboot mode, however only the ASUS screen appears but I treated it as the fastboot mode itself. Then I checked if it was really on fastboot mode through "fastboot devices" and it showed my serial number. I can only enter into TWRP using "fastboot boot twrp.img" . I don't know if I already installed it because although I opened it, I can't do it from the phone (POWER+VOLUMEDOWN)
Ok now boot twrp and then flashamodified zip or cm13 and your phone should eork you dhould to have unlockrd bootloader
Hi to all, i'd re-open this 3d for the same problem. After months I'm trying to re-sleep my ZE500KL. It was in "can't load invalid boot image" loop. I tried to force recovery mode and (wrongly) force to update from update.zip the stock fw stored in the uSD.
Since this time I can't enter in recovery mode more but fastboot only. The problem is that, in spite of the USB drivers are installed, fastboot does not recognize any connected device.
I've run Win 10 pro with a zenbook ux333fn laptop and I remembered android 6 on the phone, the last time I saw it alive.
I've tried also to install twrp 3.1, with no positive results.
Anyone can suggest me any solving way?
Thanks to all
...anybody?
Up.....
sh4d3_ said:
Hi to all, i'd re-open this 3d for the same problem. After months I'm trying to re-sleep my ZE500KL. It was in "can't load invalid boot image" loop. I tried to force recovery mode and (wrongly) force to update from update.zip the stock fw stored in the uSD.
Since this time I can't enter in recovery mode more but fastboot only. The problem is that, in spite of the USB drivers are installed, fastboot does not recognize any connected device.
I've run Win 10 pro with a zenbook ux333fn laptop and I remembered android 6 on the phone, the last time I saw it alive.
I've tried also to install twrp 3.1, with no positive results.
Anyone can suggest me any solving way?
Thanks to all
Click to expand...
Click to collapse
Up...
QFIL or AFT can be the solution.
I have a similar problem, a hard bricked Z00ED (ZE500KL) not able to get into fastboot or recovery.
after reading some thread here an there. that are Processor / Chipset specific flash tools that help flash bootloaders and repartition hard bricked device.
For mobiles with MediaTec devices, there is a tool called SP Flash Tool. I wasted a whole day with it. then understood that Z00ED (ZE500KL) has a Qualcomm Processor MSM8916
Therefore we need a Qualcomm Flasher here (QFIL )
But nos I am stuck with getting firmware for ZE500KL that can be used by QFIL tool, It should have a firehouse*.mbr file that is the programmer (dependent on CPU of the phone) and a rawprogram*.hex file that I don't know where to get from.
Thanks... It seems a bit less wild, but in any case no solving, yet
Up! ...anyone?
Up!
Hi everyone, i cant enter to EDL mode, i need it because my stock rom is unstable(All start with OTA update), after update it show me "unfortunately android.... has stopped " every 3-5 seconds. EDL works fine yesterday and i try to install fastboot rom, but since MiFlash get error when i install fastboot rom i cant reboot in EDL. Hope you can help me.
note: I try reboot trough fastboot and do same thing as the video.
youtube. com/watch?v=gPh1yE3or8g&feature=youtu. be
(Sorry for the video post, but i cant find something like this case in web and i really need help)
You can try load in fastboot, connect to pc and run edl.cmd from archive.
www28.zippyshare.com/v/sKankJGd/file.html
go to fastboot and type "Fastboot oem edl" then enter and you will find the device got into the EDL mode
Unlock your bootloader and flash a custom recovery is the best way
I have the same problem
Hi! I have the same problem! I can´t get to EDL mode, also I cant update with MiFlash anymore.
I´ve been searching for over a week for a solution but I can´t fix the phone.
I´ve done the following.
1. Bought the Redmi 3S phone from Gearbest, came with a rom with adware, I was unable to update the rom from the updater.
2. I downloaded an Official Fastboot ROM from the XIaomi website, then updated to latest version MIUI Official TeamVersion Stable ROM: V8.1.1.0.MALMIDI (MIUI8), without unlocking bootloader.
3. After succesfully updating the phone, Android starts but then I get a continuos error message and I cant do anything. Now I can only get to Fastboot Mode (EDL does not work anymore, even using Fastboot EDL mode). If I try to flash it again with Mi Flash I get Flash tz error.
4. I applied for unlocking, received the message after 48 hours but I am stuck on 50% with the error -current account is different from account info on the device xiaomi-
5. I am unable to update the firmware using fastboot mode, recovery mode or EDL mode, Unable to unlock the bootloader. Already tried several methods with no results.
Please help!
Thank you very much.
If your issue is just to go to EDL mode and get back Qualcomm 9008 port com why not to try the "cable trick" found for the redmi note3.
https://xiaomi.eu/community/threads...-edl-no-fastboot-no-logo-no-led-solved.34113/
See post n°22 and it is no risk to try it. The cable would be reusable.
You have also many other posts on the subject, just goole it.
Here's a really easy way to make a deep flash cable http://forum.xda-developers.com/xiaomi-redmi-3s/help/help-bricked-phone-t3510277/post70029683#post70029683
julianpaul said:
Here's a really easy way to make a deep flash cable http://forum.xda-developers.com/xiaomi-redmi-3s/help/help-bricked-phone-t3510277/post70029683#post70029683
Click to expand...
Click to collapse
Thanks! I will give it a try!
D3VI0US said:
go to fastboot and type "Fastboot oem edl" then enter and you will find the device got into the EDL mode
Click to expand...
Click to collapse
it reboots the device , unable to boot to edl mode
tetsumo said:
Hi! I have the same problem! I can´t get to EDL mode, also I cant update with MiFlash anymore.
I´ve been searching for over a week for a solution but I can´t fix the phone.
I´ve done the following.
1. Bought the Redmi 3S phone from Gearbest, came with a rom with adware, I was unable to update the rom from the updater.
2. I downloaded an Official Fastboot ROM from the XIaomi website, then updated to latest version MIUI Official TeamVersion Stable ROM: V8.1.1.0.MALMIDI (MIUI8), without unlocking bootloader.
3. After succesfully updating the phone, Android starts but then I get a continuos error message and I cant do anything. Now I can only get to Fastboot Mode (EDL does not work anymore, even using Fastboot EDL mode). If I try to flash it again with Mi Flash I get Flash tz error.
4. I applied for unlocking, received the message after 48 hours but I am stuck on 50% with the error -current account is different from account info on the device xiaomi-
5. I am unable to update the firmware using fastboot mode, recovery mode or EDL mode, Unable to unlock the bootloader. Already tried several methods with no results.
Please help!
Thank you very much.
Click to expand...
Click to collapse
I got same problem.. But I'am not yet get permision to unlock bootloader.. Please help me.. What can i do to flash my redmi 3s..
please help me friends.....
i have redmi 2 and its model no. is 2014818.i rooted my phone by zip file throug updater app.after installation super su app installed automatically.then i opened super su app and it prompts to select continue with normal recovery or twrp/cwm custom recovery.by mistake selected second option which is twrp/cwm custom recovery.then clicked continue.after that my phone booted and that after stucked at mi logo.
my phone is not going to recovery mode.it is stucked at mi logo.
But it is going into fastboot mode properly.also i flashed latest rom by fastboot method and it shows success result in mi flash tool.but after booting it agian stucked at mi logo.i also tried to flash by command prompt by using adb and fastboot tools.all commands i give gets executed properly but the problem is not solved
i went to Mi service center.he told me that "i will do some software update.after some time he came up and said that the phone is taking much time and stucked at mi logo.
then he assumed and told me that ,there is an issue in motherboard i.e. the motherboard is currputed.
but in my perspective i dont think so, because all the fastboot cammands and functions are woring properly.
please help me in this situation and suggest me that whether it is software issue or hardware, and also about the chances of resuming to life of my phone.
you should try to flash the firmware again but don't forget to select clean_all while flashing from mi flash tool. if your phone doesn't revives then maybe it's hardware issue.
and yes also try to install custom recovery and custom os after flashing firmware maybe your phone gets a new life.
U can't flash stock ROM by fastboot r8?
Have u tried to flash T.W.R.P by fastboot by using mi flash tool(try to use latest version of mi flash too).
And direction is here.If that succed then all is good.
not worked
Bhavesh_khatri said:
you should try to flash the firmware again but don't forget to select clean_all while flashing from mi flash tool. if your phone doesn't revives then maybe it's hardware issue.
and yes also try to install custom recovery and custom os after flashing firmware maybe your phone gets a new life.
Click to expand...
Click to collapse
I have done clean install And everything already.But not Working and now phone is not going into fastboot mode also and also not booting on pressing power button.
On connecting to pc the notification message appears and says "unrecognizable device and device may be malfunctioned".
Done already before writing this thread.
raymond_bqg said:
U can't flash stock ROM by fastboot r8?
Have u tried to flash T.W.R.P by fastboot by using mi flash tool(try to use latest version of mi flash too).
And direction is here.If that succed then all is good.
Click to expand...
Click to collapse
i tried to flash TWRP and CWM recovery By Adb and fatboot method using commands (command prompt method) amd on giving commands all executed properly but not resulted.
From now phone is not going into fastboot mode also and not booting on pressing power button.
On connecting to pc the notification message appears and says "unrecognizable device and device may be malfunctioned".sometimes it is detected as Qualcomm Device on connecting.
In that case your device is hard bricked. You need professional help.
But check if your device is listed or not in device manager if it shows an exclamation mark try to update the drivers and though your device doesn't boots into fast boot mi-flash would probably detect your phone and than flash hope it would recover your device up-to certain extent.
I only understand your problem why because I too same thing as you did.
Lavnish said:
please help me friends.....
i have redmi 2 and its model no. is 2014818.i rooted my phone by zip file throug updater app.after installation super su app installed automatically.then i opened super su app and it prompts to select continue with normal recovery or twrp/cwm custom recovery.by mistake selected second option which is twrp/cwm custom recovery.then clicked continue.after that my phone booted and that after stucked at mi logo.
my phone is not going to recovery mode.it is stucked at mi logo.
But it is going into fastboot mode properly.also i flashed latest rom by fastboot method and it shows success result in mi flash tool.but after booting it agian stucked at mi logo.i also tried to flash by command prompt by using adb and fastboot tools.all commands i give gets executed properly but the problem is not solved
i went to Mi service center.he told me that "i will do some software update.after some time he came up and said that the phone is taking much time and stucked at mi logo.
then he assumed and told me that ,there is an issue in motherboard i.e. the motherboard is currputed.
but in my perspective i dont think so, because all the fastboot cammands and functions are woring properly.
please help me in this situation and suggest me that whether it is software issue or hardware, and also about the chances of resuming to life of my phone.
Click to expand...
Click to collapse
Simply flash twrp recovery n your phone through adb drivers or contact me. I can't give you video tutorial because I don't want you make that mistake again. my mail id: [email protected]
Alrighty I think praveen66542 is not wrong.
I have actually a redmi 2 and I had exactly the same problem a year ago; I've tried all the methods but it didn't work
So i've do is :
I installed Android SDK + ADB Drivers
I Turned my phone into fastboot mode
And I wiped all data from ADB But if you don't want to loose your data you can always do a backup from ADB and then wipe device's data
I think that's the one and only working solution.
Hello everyone, in today's guide I will tell you all how to fix bootloop problem in Redmi note 4
NOTE: THIS FIX IS FOR THOSE WHOSE PROBLEM DIDN'T GET FIXED EVEN AFTER FLASHING WITH MIFLASH
QFIL is a tool which is used to flash stock firmwares in Qualcomm smartphones.
Prerequisites:
1)Bricked Redmi note 4 (lol I guess you have that already if you are reading this)
2) Working USB cable (You really dont want yourself smashing your head and then finding out faulty cable)
3) QPST Version 2.7.438.3 (Google it)
4) Unlocked bootloader
5) Platform Tools (For passing OEM EDL command)
6) Stock fastboot MIUI ROM (IMPORTANT: Use V8.1.10.0.MCFMIDI from here: http://bigota.d.miui.com/V8.1.10.0....DI_20161228.0000.00_6.0_global_7557bfe334.tgz)
7)QDLoader HS-USB Driver for Redmi Note 4X
Note: I'm not responsible if you mess up your device the mentioned process helped me and others in fixing our devices. You yourself are responsible!
Steps:
1) Open QFIL tool from C:\Program Files\Qualcomm\QPST\bin or wherever you installed it. Run as administrator!
Note: Don't use older version QPST, because you will get an error message when writing userdata section.
2) In QFIL choose Flat Build option.
3) Make sure you you have extracted the above ROM file onto desktop
4) In QFIL tool browse and locate .mbn file
(Named like: prog_emmc_firehose_8953_ddr.mbn)
5) Click on Load XML and select rawprogram0.xml and patch0.xml inside your Fastboot ROM folder.
6) Now turn off your phone and enter Fastboot mode by pressing ans holding power button+vol down button. After that open platform tools folder downloaded above and right click opening cmd in that folder and write following command:
fastboot oem edl
And hit enter (The above command does require your bootloader to be unlocked so kindly keep that in mind before passing the command)
7) Your phone will exit Fastboot mode and red led will start blinking and your phone will be detected as COM port in QFIL tool.
8) At last hit download button, if you did everything right process should begin and end saying download complete.
9) You can now remove your phone and keep holding power button till it boots up. First boot will take some time.
Optional step 10) If you loose your IMEI in flashing process then you can flash your IMEI using Qualcomm IMEI tool (If you face problem in this then comment and i will come up with another guide regarding IMEI flashing)
Hope it helps, if yes be sure you hit that thumbs up button it gives me good feeling lol ?
Reply if you face any problem
Peace!
addymishra said:
Hello everyone, in today's guide I will tell you all how to fix bootloop problem in Redmi note 4
NOTE: THIS FIX IS FOR THOSE WHOSE PROBLEM DIDN'T GET FIXED EVEN AFTER FLASHING WITH MIFLASH
QFIL is a tool which is used to flash stock firmwares in Qualcomm smartphones.
Prerequisites:
1)Bricked Redmi note 4 (lol I guess you have that already if you are reading this)
2) Working USB cable (You really dont want yourself smashing your head and then finding out faulty cable)
3) QPST Version 2.7.438.3 (Google it)
4) Unlocked bootloader
5) Platform Tools (For passing OEM EDL command)
6) Stock fastboot MIUI ROM (IMPORTANT: Use V8.1.10.0.MCFMIDI from here: http://bigota.d.miui.com/V8.1.10.0....DI_20161228.0000.00_6.0_global_7557bfe334.tgz)
7)QDLoader HS-USB Driver for Redmi Note 4X
Note: I'm not responsible if you mess up your device the mentioned process helped me and others in fixing our devices. You yourself are responsible!
Steps:
1) Open QFIL tool from C:\Program Files\Qualcomm\QPST\bin or wherever you installed it. Run as administrator!
Note: Don't use older version QPST, because you will get an error message when writing userdata section.
2) In QFIL choose Flat Build option.
3) Make sure you you have extracted the above ROM file onto desktop
4) In QFIL tool browse and locate .mbn file
(Named like: prog_emmc_firehose_8953_ddr.mbn)
5) Click on Load XML and select rawprogram0.xml and patch0.xml inside your Fastboot ROM folder.
6) Now turn off your phone and enter Fastboot mode by pressing ans holding power button+vol down button. After that open platform tools folder downloaded above and right click opening cmd in that folder and write following command:
fastboot oem edl
And hit enter
7) Your phone will exit Fastboot mode and red led will start blinking and your phone will be detected as COM port in QFIL tool.
8) At last hit download button, if you did everything right process should begin and end saying download complete.
9) You can now remove your phone and keep holding power button till it boots up. First boot will take some time.
Optional step 10) If you loose your IMEI in flashing process then you can flash your IMEI using Qualcomm IMEI tool (If you face problem in this then comment and i will come up with another guide regarding IMEI flashing)
Hope it helps, if yes be sure you hit that thumbs up button it gives me good feeling lol
Reply if you face any problem
Peace!
Click to expand...
Click to collapse
Hi,
after your manual, download success, the device restarts, but it then gets stuck with the MI logo?
What can I do?
sieg
sieg01 said:
Hi,
after your manual, download success, the device restarts, but it then gets stuck with the MI logo?
What can I do?
sieg
Click to expand...
Click to collapse
Hello there,
First of all make sure that you are flashing the fastboot rom which I mentioned in the thread.
Now coming to your problem, open QFIL tool and open configuration panel. You will see many options, check for 'Erase before Download' option and make sure its unchecked then try flashing again. If the problem persist then send me screenshot of QFIL tool along with configuration.
All the best!
addymishra said:
Hello there,
First of all make sure that you are flashing the fastboot rom which I mentioned in the thread.
Now coming to your problem, open QFIL tool and open configuration panel. You will see many options, check for 'Erase before Download' option and make sure its unchecked then try flashing again. If the problem persist then send me screenshot of QFIL tool along with configuration.
All the best!
Click to expand...
Click to collapse
Hi again,
I have flashed again and in the " download configuration " I set " Erase before Download", please see the Attachment, unfortunately the same device restarts, but it then gets stuck with the MI logo?
sieg01 said:
Hi again,
I have flashed again and in the " download configuration " I set " Erase before Download", please see the Attachment, unfortunately the same device restarts, but it then gets stuck with the MI logo?
Click to expand...
Click to collapse
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
addymishra said:
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
Click to expand...
Click to collapse
1. My redmi is unlocked ( from Xiaomi )
2. MI flash tool don`t work, because I get error: can not found file flash_all.bat, so I dont`t use this tool
sieg01 said:
1. My redmi is unlocked ( from Xiaomi )
2. MI flash tool don`t work, because I get error: can not found file flash_all.bat, so I dont`t use this tool
Click to expand...
Click to collapse
In order to use mi flash correctly kindly place the fastboot rom in C: drive root directory then try flashing, it will work. Its a bug of mi flash
Hi I followed your all 9 steps in the first post. However, me too is stuck in 'mi' logo nothing happens waiting after 10 minutes
Then I followed the following steps, flashed by mi tool followed by QFIL. But my QFIL didn't have "ERASE BEFORE DOWNLOAD" option. I downloaded the exact QPST version 2.7.438.3 from gsmhosting forum.
Still the phone boots and stuck with 'mi' logo forever. I have tried flashing other ROMs like RR, lineageOS from TWRP but each of the ROM is stuck while booting . Only miuiPro "miuipro_v7.0_mido_v9.2.1.0_NCFCNEK.zip" manages to boot but keeps rebooting after every 2-3 seconds. My phone has been useless for 3 long days.
addymishra said:
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
Click to expand...
Click to collapse
biits1993 said:
Hi I followed your all 9 steps in the first post. However, me too is stuck in 'mi' logo nothing happens waiting after 10 minutes
Then I followed the following steps, flashed by mi tool followed by QFIL. But my QFIL didn't have "ERASE BEFORE DOWNLOAD" option. I downloaded the exact QPST version 2.7.438.3 from gsmhosting forum.
Still the phone boots and stuck with 'mi' logo forever. I have tried flashing other ROMs like RR, lineageOS from TWRP but each of the ROM is stuck while booting . Only miuiPro "miuipro_v7.0_mido_v9.2.1.0_NCFCNEK.zip" manages to boot but keeps rebooting after every 2-3 seconds. My phone has been useless for 3 long days.
Click to expand...
Click to collapse
Try downloading the lastest version from here:
https://androidmtk.com/download-qpst-flash-tool
Erase before download must be unchecked
And remember first boot does take some time so be patient a little. Hope it works!
addymishra said:
Try downloading the lastest version from here:
https://androidmtk.com/download-qpst-flash-tool
Erase before download must be unchecked
And remember first boot does take some time so be patient a little. Hope it works!
Click to expand...
Click to collapse
Hi, Thank you very much, I managed to boot the ROM using QFil , however in setup wizard I can't get past the getting device security info in mi account setup. Besides, dialogues for lots "app stopped working" keeps coming. and also there are frequent reboots
addymishra said:
In order to use mi flash correctly kindly place the fastboot rom in C: drive root directory then try flashing, it will work. Its a bug of mi flash
Click to expand...
Click to collapse
Hi,
II managed to flash successfully with MIflash tool, but after switching it on
do I have permanent boot loop with MI logo? Andere Fastboot ROM`s will MIflash nicht machen. Please look my Screenshot.
Greating
biits1993 said:
Hi, Thank you very much, I managed to boot the ROM using QFil , however in setup wizard I can't get past the getting device security info in mi account setup. Besides, dialogues for lots "app stopped working" keeps coming. and also there are frequent reboots
Click to expand...
Click to collapse
Strange :/ you can try miflash tool for that case. Download the lastest mi flash tool, enter into EDL mode using "fastboot oem edl" command then in mi flash drop down menu in left corner select "flash_factory.bat" and click flash. It will take around 400 seconds. Make sure you are in edl mode with red blinking light otherwise it will wipe your IMEI. Hope it works!
sieg01 said:
Hi,
II managed to flash successfully with MIflash tool, but after switching it on
do I have permanent boot loop with MI logo? Andere Fastboot ROM`s will MIflash nicht machen. Please look my Screenshot.
Greating
Click to expand...
Click to collapse
Are you able to enter into setup wizard? If not then try the procedure I posted above using factory flash. After flashing with mi flash once again try flashing with QFIL. It's sometimes hit or miss :/
addymishra said:
Are you able to enter into setup wizard? If not then try the procedure I posted above using factory flash. After flashing with mi flash once again try flashing with QFIL. It's sometimes hit or miss :/
Click to expand...
Click to collapse
Hi,
I don`t able to enter into setup wizard, because boot-loop, so I done following:
1. mi flash factory flash-successfully
2. mi flash flash once again-successfully
3. flashing with QFIL- successfully
After switch-on again boot loop every 22 seconds with mi-logo
Do you have any more tips for me?
Greating
sieg
sieg01 said:
Hi,
I don`t able to enter into setup wizard, because boot-loop, so I done following:
1. mi flash factory flash-successfully
2. mi flash flash once again-successfully
3. flashing with QFIL- successfully
After switch-on again boot loop every 22 seconds with mi-logo
Do you have any more tips for me?
Greating
sieg
Click to expand...
Click to collapse
Man, I think its some sort of hardware issue then. Or maybe your messed up your blobs or your partitions real bad and corrupted them. QFIL helped in my case. Got no more tips, maybe its time to visit service center brother One last shot you can give is to try flashing with QFIL first then with Mi Flash. That's last hope! All the best!
flash failed in QFIL please help
sohanaw said:
flash failed in QFIL please help
Click to expand...
Click to collapse
Which version of QFIL and which ROM are you flashing with? I managed to flash the said version in OP through QFIL without any error. However, other official versions like 9.xx fail to be flashed by QFIL
A solution that worked after all these troubles
Hi everyone,
This post is for those who are still struggling with 'cool' bootloop in Redmi note 4x irrespective of stock, custom ROMS, you are flashing.
Before all these steps I flashed "mido_global_images_V8.1.10.0.MCFMIDI_20161228.0000.00_6.0_global_7557bfe334.tgz" using QFIL first, then miFlash tool. I was greeted by "can't decrypt phone".
Refer to the OP
Then I flashed lazy_flasher and managed to boot into the stock ROM but couldn't get past the Mi account setup. Even my Keyboard app keeps stopping, so annoying.
The the below Steps I followed redeemed me of this agony powered by xiaomi:
1. Downloaded this firmware==>"global-mido-firmware-7.12.14.zip"
Mokee ROM==>"MK71.2-mido-201803080920-NIGHTLY"
open gapps arm-64, 7.1, pico
open gapps arm-64, 7.1, nano [BOTH] from gapps
2. flashed TWRP=3.1.1-0[official version] from the xda
Code:
fastboot flash recovery [name_of_recovery_image_of_twrp]
3. Entered into Recovery==>WIPE=>Advanced WIPE=> select all partitions==>WIPE[can leave Internal storage unchecked]
4. Then Format Data==>yes
5. Copied firmware, Mokee ROM, pico and nano gapps [4 items] to internal storage
6. Flashed downloaded firmware, then MOKEE ROM, then gapps-nano
7. Reboot to recovery
8. After entering Recovery, Reboot to system
Hopefully we will see mi logo, then Mokee robot animating soon enough. It will take you to setup wizard within 5-10 minutes, If you see any Google apps [Gboard in my case] stopping,
it may mean that google Play services were not installed properly[Don't know why]. In my case I couldn't set up Google account/framework first time. If it happens, go to settings,
enable developer options tapping BUILD version==>then enable USB debugging.
Then reboot to Recovery
Flash gapps-pico.
Do factory reset from Recovery, simple wipe.
Then reboot to System.[DON'T install TWRP as system app etc]
For me, this time I was able to setup google account from the setup wizard. Google service framework has been working without any issues. [ Again Don't know why]
This time I have been able to install my desired apps from playstore
Few more words:
Firstly, I tried flashing only pico, but I couldn't set up the google account, no matter how many times I reboot to recovery, wipe Dalvik-cache etc, then flash pico.
I described exactly what I did that worked out for me. There could be many possible orders, combinations, but I don't have time for that.
I tried to flash Alexy's "RR-N-v5.8.5-20180121mido_alexy.zip" ROM in combination with this firmware but it just will hang TWRP while flashing. only this MOKEE ROM worked with this firmware for me.
I wasted full 3 days for fixing this device. And no intention to tinker with it anymore, my communication has been in a mess!.
While in stock MIUI 'google *apps keeps stopping" just annoyed me as hell, so decided to switch, and after 3 days of disgusting 'Waiting period for bootloader UNLOCK' I couldn't even install a working stock
MIUI ROM now, maybe cheap hardware issue offered by Xiaomi. They have just made everything complex. This is my first and last device from them. My previous Moto G3 was amazing and would be with me had it not been stolen
Will be happy to help regarding this issue, and thank you the OP of this thread, who helped me realize that this device is still able to boot.
Wishing everyone in this note 4x trouble good luck!!
biits1993 said:
Hi everyone,
This post is for those who are still struggling with 'cool' bootloop in Redmi note 4x irrespective of stock, custom ROMS, you are flashing.
Before all these steps I flashed "mido_global_images_V8.1.10.0.MCFMIDI_20161228.0000.00_6.0_global_7557bfe334.tgz" using QFIL first, then miFlash tool. I was greeted by "can't decrypt phone".
Refer to the OP
Then I flashed lazy_flasher and managed to boot into the stock ROM but couldn't get past the Mi account setup. Even my Keyboard app keeps stopping, so annoying.
The the below Steps I followed redeemed me of this agony powered by xiaomi:
1. Downloaded this firmware==>"global-mido-firmware-7.12.14.zip"
Mokee ROM==>"MK71.2-mido-201803080920-NIGHTLY"
open gapps arm-64, 7.1, pico
open gapps arm-64, 7.1, nano [BOTH] from gapps
2. flashed TWRP=3.1.1-0[official version] from the xda
Code:
fastboot flash recovery [name_of_recovery_image_of_twrp]
3. Entered into Recovery==>WIPE=>Advanced WIPE=> select all partitions==>WIPE[can leave Internal storage unchecked]
4. Then Format Data==>yes
5. Copied firmware, Mokee ROM, pico and nano gapps [4 items] to internal storage
6. Flashed downloaded firmware, then MOKEE ROM, then gapps-nano
7. Reboot to recovery
8. After entering Recovery, Reboot to system
Hopefully we will see mi logo, then Mokee robot animating soon enough. It will take you to setup wizard within 5-10 minutes, If you see any Google apps [Gboard in my case] stopping,
it may mean that google Play services were not installed properly[Don't know why]. In my case I couldn't set up Google account/framework first time. If it happens, go to settings,
enable developer options tapping BUILD version==>then enable USB debugging.
Then reboot to Recovery
Flash gapps-pico.
Do factory reset from Recovery, simple wipe.
Then reboot to System.[DON'T install TWRP as system app etc]
For me, this time I was able to setup google account from the setup wizard. Google service framework has been working without any issues. [ Again Don't know why]
This time I have been able to install my desired apps from playstore
Few more words:
Firstly, I tried flashing only pico, but I couldn't set up the google account, no matter how many times I reboot to recovery, wipe Dalvik-cache etc, then flash pico.
I described exactly what I did that worked out for me. There could be many possible orders, combinations, but I don't have time for that.
I tried to flash Alexy's "RR-N-v5.8.5-20180121mido_alexy.zip" ROM in combination with this firmware but it just will hang TWRP while flashing. only this MOKEE ROM worked with this firmware for me.
I wasted full 3 days for fixing this device. And no intention to tinker with it anymore, my communication has been in a mess!.
While in stock MIUI 'google *apps keeps stopping" just annoyed me as hell, so decided to switch, and after 3 days of disgusting 'Waiting period for bootloader UNLOCK' I couldn't even install a working stock
MIUI ROM now, maybe cheap hardware issue offered by Xiaomi. They have just made everything complex. This is my first and last device from them. My previous Moto G3 was amazing and would be with me had it not been stolen
Will be happy to help regarding this issue, and thank you the OP of this thread, who helped me realize that this device is still able to boot.
Wishing everyone in this note 4x trouble good luck!!
Click to expand...
Click to collapse
will try this tonight, thanks bhai
sohanaw said:
will try this tonight, thanks bhai
Click to expand...
Click to collapse
Let me know bro what happens, hope it works for you
I wanted to use RR rom though, but in the end no ROM worked for me except this one. So I'm just happy with it.
Hello everyone.
I Have Huawei P10 Lite WAS-LX1A and I accidentally bricked my device.
I was using TWRP to install a rom, and I wipped my system but the rom couldn't be installed for some reason. So I thought my TWRP Version had a problem, so I tried with bootloader to istall a new TWRP.
In adb I pressed:
fastboot flash recovery TWRP_by_GreatSlon.img
Click to expand...
Click to collapse
and then
fastboot flash recovery custom_boot_decryptdata_b130
Click to expand...
Click to collapse
But now, it doesn't load TWRP at all when I press vulume up + power button. I am stuck with out TWRP and with out an OS.
And I can't enter bootloader to install a new TWRP. Is there anything I can do?
I do have a laptop and an SD Card and my Bootloader is unlocked. Phone Unlocked and FRP Unlock are red, so maybe there is a way to save my phone please? I need help please . Sorry if I am not explaining very good and if I don't write correctly, I'ts because I am very very sad . Please someone tell me there is a way to fix it. Maybe dload? But I cannot find any file that it fits.. Thanks in advance.
I found this youtu.be/pkWSDlrLmns and I intalled a new TWRP. But I still cannot find any ROM to install. Any help please?
tobelios said:
I found this youtu.be/pkWSDlrLmns and I intalled a new TWRP. But I still cannot find any ROM to install. Any help please?
Click to expand...
Click to collapse
Try this.
tobelios said:
fastboot flash recovery TWRP_by_GreatSlon.img
and then
Quote:
fastboot flash recovery custom_boot_decryptdata_b130
Click to expand...
Click to collapse
you flashed twrp in recovery partition and after that, you flashed "custom_boot_decryptdata" also in recovery partition. so, twrp was overwritten. that's the reason why it doesn't work now. are you able to enter fastboot? (VOL- & power button)?
are you on emui5 or emui8?
if you can enter fastboot mode, flash twrp again.
Bricked P10 lite
My huawei p10 lite completely dead after mistakenly doing a wipeall from twrp. Now the screen doeant turn on , no logo, no vibrations, nothing. But the computer detects something(still no reaponse on phone) and when i typed fastboot devices in minimal adb it shows the list and the phone is listed in it. Please help.
Vrockpockey04 said:
My huawei p10 lite completely dead after mistakenly doing a wipeall from twrp. Now the screen doeant turn on , no logo, no vibrations, nothing. But the computer detects something(still no reaponse on phone) and when i typed fastboot devices in minimal adb it shows the list and the phone is listed in it. Please help.
Click to expand...
Click to collapse
Try to flash all partitions from a service rom.
I have the Same Problem. Only dark screen with fastboot connection.
(Sorry for the very late reply) I could enter fastboot using a pc, and then flashed a different twrp and costum rom.
Everything was okay. But, lately my rom started having network problems and I decided to flash an another rom..
But when I did, something wrong happened and now I am without twrp, without rom and with phone and frp locked.
My destiny is to brick my device and go to imposimple position, isn't it? I don't have my unlocked code so I cannot unlock my bootloader. I paid and tried dc unlocker to unlock my phone, but after plug-unplug it stopped being unlocked again and my money for dc unlocker gone for nothing and I am not willing to pay again for something like that. Any ideas to unlock my phone?
I sent an email and message to Huawei to see if they can give me the code, but idk if they will do. Any suggestions?
This post can be locked. This thread continues here. As for the Huawei, they respond that they don't give the unlock code anymore..