Strange root / Recovery issue. Please help - ZTE Axon 7 Questions & Answers

Hi. I bought 2nd hand zte axon 7 a2017. I found out it has root access but there was no su app. So downloaded superuser from chainfire from play store and it said binary occupied. Downloaded hardware info app and it suggested busy box is installed, rooted, su is phh su and showed the path where it is located. So downloaded phh su from play store and got full root access.! Good but seems like there is no custom recovery. It is still on stock recovery. Is this even possible..? What is the best way to put custom recovery as I really want a nandroid back up.. Please assist. Thank you

The axon7 has had its EDL programmer released and a leaked ZTE signed TWRP since shortly after the device went on sale. Anything is possible.
I would recommend nuking it... wipe the phone data and then install the latest full official firmware over whatever you have now. Then you can go back and start modding.
Jay_Nz said:
Hi. I bought 2nd hand zte axon 7 a2017. I found out it has root access but there was no su app. So downloaded superuser from chainfire from play store and it said binary occupied. Downloaded hardware info app and it suggested busy box is installed, rooted, su is phh su and showed the path where it is located. So downloaded phh su from play store and got full root access.! Good but seems like there is no custom recovery. It is still on stock recovery. Is this even possible..? What is the best way to put custom recovery as I really want a nandroid back up.. Please assist. Thank you
Click to expand...
Click to collapse

Thanks for replying. Just a thought is it possible to flash twrp on top of the existing set up..? And keep the root as it is.?

Should be, but it's not safe since you do not know the current root method.

Odds are fairly high that you have malware on the device. Be safe, nuke it.
Jay_Nz said:
Thanks for replying. Just a thought is it possible to flash twrp on top of the existing set up..? And keep the root as it is.?
Click to expand...
Click to collapse

Ok thanks for replying. Anti-virus shows device is clean. I'll do a clean one then as recommended . Flash official firmware first then flash twrp and probably will go for magisk root. Wish me luck as power button is mushed in and have to poke it real hard. I don't even know if bootloader is unlocked or not.. Haha

tdm said:
The axon7 has had its EDL programmer released and a leaked ZTE signed TWRP since shortly after the device went on sale. Anything is possible.
Click to expand...
Click to collapse
where to find these solutions??

Check for posts by tenfar for the signed twrp.
The firehose was included in one of the leaked update packages. I don't remember which one. I got my copy by running tcpdump while running tenfar"s twrp flasher.
Druboo666 said:
where to find these solutions??
Click to expand...
Click to collapse

tdm said:
Check for posts by tenfar for the signed twrp.
The firehose was included in one of the leaked update packages. I don't remember which one. I got my copy by running tcpdump while running tenfar"s twrp flasher.
Click to expand...
Click to collapse
also works in B32??i am on b32 and i am stuck with stock recovery as bootloader as been striped from b32 so this will give me TWRP back on B32??

Druboo666 said:
also works in B32??i am on b32 and i am stuck with stock recovery as bootloader as been striped from b32 so this will give me TWRP back on B32??
Click to expand...
Click to collapse
I don't know, you can try.

Jay_Nz said:
Hi. I bought 2nd hand zte axon 7 a2017. I found out it has root access but there was no su app. So downloaded superuser from chainfire from play store and it said binary occupied. Downloaded hardware info app and it suggested busy box is installed, rooted, su is phh su and showed the path where it is located. So downloaded phh su from play store and got full root access.! Good but seems like there is no custom recovery. It is still on stock recovery. Is this even possible..? What is the best way to put custom recovery as I really want a nandroid back up.. Please assist. Thank you
Click to expand...
Click to collapse
I just posted some huge verbose $hit on your previous post, just sayin

Hi, Thank you for your guidance so far. Question - if the previous owner just flashed stock rom then shouldn't g that get rid of root. As you can see from this 2nd post I checked on some root apps and it said it is rooted and su is phh so I downloaded phh su from play store and now rooted apps work fine. Some one pointed out chances of my phone having a malware are quite high so I just want to clean all up and have nandroid g back up. It is an awesome phone. As per your recommendation should I flash using miflash.? Would updating from sd card in phone settings not put it back to complete stock and get rid of root and everything.? When I restart I don't get that device can't be checked for corruption message. I'm on marshmallow at the moment so flashing nougat be ok whether it if from miflash or SD card firmware update.? Appreciate your assistance. Thank you

Yes, if the previous owner flashed stock only, you would not have root. He either flashed a malicious package or "helpfully" pre-rooted it for you. So you have untrusted and unknown, and regardless of what it may seem, not stock software.
There are several "return to stock" threads. I would study a couple to get a feel for how the procedure works and then follow one of them. Here's one I pulled up in a search:
https://forum.xda-developers.com/axon-7/development/rom-guide-how-to-restore-stock-a2017u-t3549227
I can't vouch for it, it's just the first one that popped up. However, it does seem to be very complete both in instructions and flashing everything from the boot stack on up to boot and system.
Note that b20 is rather old now -- I believe it's the first firmware that shipped on the device. You could make an effort to find newer files. But it's not really necessary, as you should get an OTA update notification after you boot into the stock system.
Good luck!
Jay_Nz said:
Hi, Thank you for your guidance so far. Question - if the previous owner just flashed stock rom then shouldn't g that get rid of root. As you can see from this 2nd post I checked on some root apps and it said it is rooted and su is phh so I downloaded phh su from play store and now rooted apps work fine. Some one pointed out chances of my phone having a malware are quite high so I just want to clean all up and have nandroid g back up. It is an awesome phone. As per your recommendation should I flash using miflash.? Would updating from sd card in phone settings not put it back to complete stock and get rid of root and everything.? When I restart I don't get that device can't be checked for corruption message. I'm on marshmallow at the moment so flashing nougat be ok whether it if from miflash or SD card firmware update.? Appreciate your assistance. Thank you
Click to expand...
Click to collapse

Hi thanks for the reply. I downloaded zip from zte and did an update from phone settings, it pumped me to marshmallow but next release version of zte up. Then another Ota and now I'm on nougat. Checked and root access is gone as expected but funnily enough app shows no root access but busy box binary yes.. Don't know if that's normal. Did a full factory reset too. Now I'm on full Chinese variant stock rom unrooted hence getting Ota. I pressed volume and power button together and managed to get to the screen with start in green and text screen. Other options included restart, power off, reboot to recovery and bootloader and it did show bootloader is locked. I'm thinking of unlocking bootloader, installing TWRP, then root through magisk and perhaps change to A2017U (usa firmware)... Fingers crossed. Thanks again..

tdm said:
Yes, if the previous owner flashed stock only, you would not have root. He either flashed a malicious package or "helpfully" pre-rooted it for you. So you have untrusted and unknown, and regardless of what it may seem, not stock software.
There are several "return to stock" threads. I would study a couple to get a feel for how the procedure works and then follow one of them. Here's one I pulled up in a search:
https://forum.xda-developers.com/axon-7/development/rom-guide-how-to-restore-stock-a2017u-t3549227
I can't vouch for it, it's just the first one that popped up. However, it does seem to be very complete both in instructions and flashing everything from the boot stack on up to boot and system.
Note that b20 is rather old now -- I believe it's the first firmware that shipped on the device. You could make an effort to find newer files. But it's not really necessary, as you should get an OTA update notification after you boot into the stock system.
Good luck!
Click to expand...
Click to collapse
But that's for the A2017U... Be careful with that, he can brick his phone or lose signal

Related

M8 Eye Recovery and Root

Hello everyone. Finally i found it. I want to help everyone who search along time this recovery.
This is twrp recovery for One M8 Eye. First please unlock bootloader via HTC DEV. Than ( fastboot flash recovery twrp-m8eye-2.8.0.3.img ) After that flash UPDATE-SuperSU-v2.46.zip ( http://download.chainfire.eu/supersu). Now you have root :good::good:
Thanks Iman Mark and Chainfire
Link: https://drive.google.com/file/d/0B71KxMi9guCSN0V5bU1DSUNaX2c/view?usp=sharing
Please don't forget thanks
This update supersu no longer works. I installed that twrp and did the process for that version of supersu and it said successful. Upon checking supersu, it says the binary files are missing. Then I installed the newer supersu verison through twrp, without deleting the old supersu and now the phone is stuck on htc boot screen. This may work for some, but DO NOT install another supersu over an old one without deleting it first. You WILL get stuck on boot.
Weisheit7 said:
Then I installed the newer supersu verison through twrp
Click to expand...
Click to collapse
"Newer" meaning what? Always be specific, otherwise we can only guess. For all we know, you flashed 2.47, which is "newer" than 2.46.
You should be using the latest stable version, which is currently 2.78, which you can obtain the zip from here: http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Try flashing this, and hopefully that works. I'm not certain, but as far as I know, you don't need to delete an old SuperSU app, in order for the proper updated one to work.
Also, a word of basic good practice when modding any Android device: Always make sure you are using the current updated methods according to your OS version.
The files in the OP are from July 15, 2015. That is well before Marshmallow existing. Root methods almost always need to be updated with each major OS version update. There is really no reason to have thought SuperSU from over a year ago would work on a current OS version device.
redpoint73 said:
"Newer" meaning what? Always be specific, otherwise we can only guess. For all we know, you flashed 2.47, which is "newer" than 2.46.
You should be using the latest stable version, which is currently 2.78, which you can obtain the zip from here: http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Try flashing this, and hopefully that works. I'm not certain, but as far as I know, you don't need to delete an old SuperSU app, in order for the proper updated one to work.
Also, a word of basic good practice when modding any Android device: Always make sure you are using the current updated methods according to your OS version.
The files in the OP are from July 15, 2015. That is well before Marshmallow existing. Root methods almost always need to be updated with each major OS version update. There is really no reason to have thought SuperSU from over a year ago would work on a current OS version device.
Click to expand...
Click to collapse
You're right, and as of right now I have a different issue. I found a link for the Chinese ROM of the htc m8 eye and I successfully installed it. Now the device is on 4.4.4 rooted. I've tried to do the OTA update but each time in stock recovery it fails after about 20-25% and says "system/bin/reboot has unexpected contents" and fails every time. I have uninstalled supersu from the app itself, deleted all of the residual files and checked the phone for root. Root checker says it's not rooted.
How can I fix the OTA problem through stock recovery? I checked the /system/bin/reboot file and there's nothing there specifically that I can see is corrupted or changed. Is there any possibility that supersu has system permissions and is causing this error? If so, how do I fix the /reboot has unexpected contents problem? How can I delete supersu (su) from having system permissions over everything?
I cannot find a stock Chinese ROM for this device, only the rooted one. I'm at a loss here..
Weisheit7 said:
I've tried to do the OTA update but each time in stock recovery it fails after about 20-25% and says "system/bin/reboot has unexpected contents" and fails every time. I have uninstalled supersu from the app itself, deleted all of the residual files and checked the phone for root. Root checker says it's not rooted.
Click to expand...
Click to collapse
Unrooting in order to OTA doesn't work, you need the stock never rooted ROM.
redpoint73 said:
Unrooting in order to OTA doesn't work, you need the stock never rooted ROM.
Click to expand...
Click to collapse
I've read online that if you unroot it the OTA update should go through. It depends on how the root was done, correct? If root has (owner) permissions over system files, how can I put it back to stock? Are you aware of any HTC One M8 eye mels_tuhl stock rom China region? I've scoured the internet forever and cannot find one. If you need my getvar info I'll post it here and I appreciate any help you can potentially give me.
Weisheit7 said:
I've read online that if you unroot it the OTA update should go through.
Click to expand...
Click to collapse
I can't speak to what you read, if you are vague and don't reference any specific website.
What you read is not correct. Its been verified in the M8 forums many times (at least on the "regular" M8). The fact you unrooted, and the OTA doesn't work, also proved it.
Weisheit7 said:
It depends on how the root was done, correct?
Click to expand...
Click to collapse
Incorrect. I haven't seen any root method on the M8, which allows OTA updates after unrooting.
Weisheit7 said:
Are you aware of any HTC One M8 eye mels_tuhl stock rom China region?
Click to expand...
Click to collapse
Unfortunately, no.
redpoint73 said:
I can't speak to what you read, if you are vague and don't reference any specific website.
What you read is not correct. Its been verified in the M8 forums many times (at least on the "regular" M8). The fact you unrooted, and the OTA doesn't work, also proved it.
Incorrect. I haven't seen any root method on the M8, which allows OTA updates after unrooting.
Unfortunately, no.
Click to expand...
Click to collapse
Thanks for taking the time to reply. Since then I have corrected the problem. I downloaded a TWRP backup of Marshmallow from another user on here in a different thread, placed it into my TWRP backup folder, wiped system, internal storage, cache etc and then flashed the backup. Everything went well...marshmallow is on the phone and root is gone.
necaticetinkaya said:
Hello everyone. Finally i found it. I want to help everyone who search along time this recovery.
This is twrp recovery for One M8 Eye. First please unlock bootloader via HTC DEV. Than ( fastboot flash recovery twrp-m8eye-2.8.0.3.img ) After that flash UPDATE-SuperSU-v2.46.zip ( http://download.chainfire.eu/supersu). Now you have root :good::good:
Thanks Iman Mark and Chainfire
Link: https://drive.google.com/file/d/0B71KxMi9guCSN0V5bU1DSUNaX2c/view?usp=sharing
Please don't forget thanks
Click to expand...
Click to collapse
Can you provide another share of the file? The previous link has expired

[Q] What to expect if OTA MM over LP Verizon XT1575?

*NOTE: I tried to update my XT1575 Moto-X Pure Edition from a file on this page and it was a disaster! I now have the OTA visible on my phone, see screenshot, that keeps popping up. My phone is currently rooted, unlocked, and has TWRP installed, all courtesy of WinDroid tool. Windroid was painless, easy, and got the job done pretty quickly. Now that I can take the OTA update, is there an instruction page somewhere showing how to take the upgrade and keep root and recovery TWRP? That is the gist of what I really need.
I have a new Motorola Moto-X Pure Edition, rooted and TWRP with WinDroid app from Windows. This made it incredibly easy to unlock bootloader, install TWRPm and root. I am very happy with this system and some Xposed modules. I heard all the hoopla about the new Marshmallow rollout but did not have it offered to me on this phone. So, I did it manually from this page:
Stock/Rooted/Debloated X1575 6.0 MPH24.49-18
So much to choose from so I downloaded the moto_x_pure_edition_rooted_x1575_mph24.49-18_v1-deodexed.zip and flashed it in TWRP, after making a nandroid backup in TWRP. Everything seemed to work fine but I had problems after problems. My 32 GB ext-sdcard "vanished" and the system insisted that I reformat the card as "Portable" or "Permanent". I chose portable. I could not get Xposed working properly. My password manager would not work, when I updated from the play store, I got the message that all Android 6 apps now require a password at first run. Huh? What password? None of the passwords I have for the password managers would open the app.
Before losing 30+ GB of data on my ext-sdcard, I copied it to PC, then when complete I put it back in the phone, allowed the format as portable, then pulled the card and restored my stuff. Nothing was working right and it was pretty scary as this is my only phone. I restored the TWRP backup and had some settling in issues, but it worked, all but for WiFi. I could not turn it on! Like a spring on the switch, the moment you switched on WiFi, it snapped right back to the OFF position. No more WiFi. A friend sent me a stock recovery zip file, CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml_SHAWN5162.zip.
This file, once unzipped, will flash the entire phone back to stock. He send me a small modem-flash.bat file because he thinks that I have an Android 6 radio in an Android 5 device. After running the flash-modem.bat, I got my WiFi back.
flash-modem.bat
Code:
@ECHO Off
@Echo Test
C:\adt-bundle-windows-x86_64-20140702\sdk\platform-tools\adb reboot bootloader
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
.fastboot reboot
Now I am really, really gun shy. I now have the dreaded update message on my phone, see screenshot. I found some good instructions here:
[GUIDE] Unlock/Root/Flash for Moto X Style/Pure
Are these instructions safe if I take the OTA update?
What preparations should be made prior to taking OTA aside from a TWRP backup?
Must I really format my ext-sdcard to use Marshmallow?
What other kind of weird things will happen?
Thank you so much, scared "sheetless in Florida"
:
Ohmster said:
*NOTE: I tried to update my XT1575 Moto-X Pure Edition from a file on this page and it was a disaster! I now have the OTA visible on my phone, see screenshot, that keeps popping up. My phone is currently rooted, unlocked, and has TWRP installed, all courtesy of WinDroid tool. Windroid was painless, easy, and got the job done pretty quickly. Now that I can take the OTA update, is there an instruction page somewhere showing how to take the upgrade and keep root and recovery TWRP? That is the gist of what I really need.
I have a new Motorola Moto-X Pure Edition, rooted and TWRP with WinDroid app from Windows. This made it incredibly easy to unlock bootloader, install TWRPm and root. I am very happy with this system and some Xposed modules. I heard all the hoopla about the new Marshmallow rollout but did not have it offered to me on this phone. So, I did it manually from this page:
Stock/Rooted/Debloated X1575 6.0 MPH24.49-18
So much to choose from so I downloaded the moto_x_pure_edition_rooted_x1575_mph24.49-18_v1-deodexed.zip and flashed it in TWRP, after making a nandroid backup in TWRP. Everything seemed to work fine but I had problems after problems. My 32 GB ext-sdcard "vanished" and the system insisted that I reformat the card as "Portable" or "Permanent". I chose portable. I could not get Xposed working properly. My password manager would not work, when I updated from the play store, I got the message that all Android 6 apps now require a password at first run. Huh? What password? None of the passwords I have for the password managers would open the app.
Before losing 30+ GB of data on my ext-sdcard, I copied it to PC, then when complete I put it back in the phone, allowed the format as portable, then pulled the card and restored my stuff. Nothing was working right and it was pretty scary as this is my only phone. I restored the TWRP backup and had some settling in issues, but it worked, all but for WiFi. I could not turn it on! Like a spring on the switch, the moment you switched on WiFi, it snapped right back to the OFF position. No more WiFi. A friend sent me a stock recovery zip file, CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml_SHAWN5162.zip.
This file, once unzipped, will flash the entire phone back to stock. He send me a small modem-flash.bat file because he thinks that I have an Android 6 radio in an Android 5 device. After running the flash-modem.bat, I got my WiFi back.
flash-modem.bat
Code:
@ECHO Off
@Echo Test
C:\adt-bundle-windows-x86_64-20140702\sdk\platform-tools\adb reboot bootloader
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
.fastboot reboot
Now I am really, really gun shy. I now have the dreaded update message on my phone, see screenshot. I found some good instructions here:
[GUIDE] Unlock/Root/Flash for Moto X Style/Pure
Are these instructions safe if I take the OTA update?
What preparations should be made prior to taking OTA aside from a TWRP backup?
Must I really format my ext-sdcard to use Marshmallow?
What other kind of weird things will happen?
Thank you so much, scared "sheetless in Florida"
:
Click to expand...
Click to collapse
Two points:
1. You can never ever ever take any OTA with a custom recovery (TWRP) installed. You MUST flash stock recovery prior to taking the OTA.
2. The update will fail if you have made ANY modifications to /system. This includes using TWRP to flash SuperSu to your device.
So if you just do a complete FULL return to stock and have a working lollipop installation, DO NOT INSTALL TWRP OR INSTALL SUPERSU. Take the OTA update. Afterwards you are free to go ahead and flash TWRP. I recommend IMMEDIATELY making a nandroid backup once you have taken the OTA and flashed TWRP.
I also suggest using the new "systemless root" method instead of the traditional root method. If you use systemless root, you won't need to restore /system (as long as you didn't modify it by flashing Xposed, Adaway, or similar. If a future OTA comes out with systemless root, you simply flash the stock kernel (which will unroot you), then accept the new update, then modify the boot image again to re-gain root.
To sum it up: *IF* you are 100% stock on lollipop (no TWRP, no SuperSU), you can go ahead and take the OTA. Afterwards, you can do whatever you would like (flash TWRP, SuperSU, etc). Just keep in mind that if you don't use the new systemless root, you will have to do a full return to stock AGAIN the next time an OTA comes out.
Good Luck.
Hi Ohmster. Hope you are well. I experienced the exact same "mess" as you have. In fact, I had the identical setup (Lollipop, TWRP, Nova, etc.). I tried the FLASH-ALL approach multiple times as well as separate reflash of the modem included in the CLARK_RETUS zip (followed steps line by line). But I'm still stuck without wifi (slides back to "off" immediately). prior to all this, I did a factory wipe as well as subsequent "fastboot -w". Any ideas? I'm on day 3 without a phone Thanks in advance for your wisdom!!
nypeach said:
Hi Ohmster. Hope you are well. I experienced the exact same "mess" as you have. In fact, I had the identical setup (Lollipop, TWRP, Nova, etc.). I tried the FLASH-ALL approach multiple times as well as separate reflash of the modem included in the CLARK_RETUS zip (followed steps line by line). But I'm still stuck without wifi (slides back to "off" immediately). prior to all this, I did a factory wipe as well as subsequent "fastboot -w". Any ideas? I'm on day 3 without a phone Thanks in advance for your wisdom!!
Click to expand...
Click to collapse
Hi Ohmster. Seems that your "positive mojo" did the trick... I tried one more time and finally up and running. Thanks for your posts and wisdom!!!
samwathegreat said:
Two points:
1. You can never ever ever take any OTA with a custom recovery (TWRP) installed. You MUST flash stock recovery prior to taking the OTA.
2. The update will fail if you have made ANY modifications to /system. This includes using TWRP to flash SuperSu to your device.
So if you just do a complete FULL return to stock and have a working lollipop installation, DO NOT INSTALL TWRP OR INSTALL SUPERSU. Take the OTA update. Afterwards you are free to go ahead and flash TWRP. I recommend IMMEDIATELY making a nandroid backup once you have taken the OTA and flashed TWRP.
I also suggest using the new "systemless root" method instead of the traditional root method. If you use systemless root, you won't need to restore /system (as long as you didn't modify it by flashing Xposed, Adaway, or similar. If a future OTA comes out with systemless root, you simply flash the stock kernel (which will unroot you), then accept the new update, then modify the boot image again to re-gain root.
To sum it up: *IF* you are 100% stock on lollipop (no TWRP, no SuperSU), you can go ahead and take the OTA. Afterwards, you can do whatever you would like (flash TWRP, SuperSU, etc). Just keep in mind that if you don't use the new systemless root, you will have to do a full return to stock AGAIN the next time an OTA comes out.
Good Luck.
Click to expand...
Click to collapse
Do you think it would work if I did a Full Unroot using SuperSU and then uninstalled it using TiBu. Then flashed stock recovery using the restore to stock tool. So at that point I would have unrooted, removed SuperSu, and flashed back the stock recovery image. Do you think this would do the trick, or is it just best to completely flash the entire device using the restore to stock tool in full. I can recover from a soft brick but don't want a complete brick. Do you think my method is worth a try and that it wouldn't cause a complete brick condition? I would like to not have to reset my phone completely, but will if that is the only best way to get onto MM. Thanks.
nypeach said:
Hi Ohmster. Seems that your "positive mojo" did the trick... I tried one more time and finally up and running. Thanks for your posts and wisdom!!!
Click to expand...
Click to collapse
Actually my XT1575 is running and is in good shape now. I was lucky, @OldBaldy got on Hangouts with me and walked me through it. He sent me a large file which I believe to be the original stock rom for the Moto-X with a flash.bat file in so as long as you have your Windows drivers installed with ADB and Fastboot working. It took me the entire night to get that working with the correct drivers because Baldy had to go to bed.
The file I really needed for this is a 1.27 GB file, CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml_SHAWN5162.zip. He told me NOT to run the FLASH-ALL.bat inside because all he wanted to do was reset the WiFi radio from an Android 6 radio to an Android 5 radio. Baldy was really smart and edited the restore system bat file to a tiny little "StockROM_FlashModem.txt" and it worked! WiFi came right back!
After that, I had to use adb over USB to flash the system back to original lollipop with no root, take the OTA update, then flash the boot.image file, update done, then flash the boot.img before installing SuperSU and most of this we did with ADB over USB. You cannot flash BETA-SuperSU-v2.52.zip until you flash that boot.img file.
If I was smart, I would have copy/pasted all the adb stuff we did into a text file, but of course, I didn't. But yes it is all working quite well now.
BEWARE:
Xposed does work in MM but not everything. I had to go back to TWRP, remove Xposed, and then enable only a couple of them that I know are safe like AdBlocker and Greenify.
I cannot give you anymore details since I screwed it up myself a couple of times and ended up redoing it on my own and again with Baldy's help.
NOTE:
Baldy did want something out of all this help he was giving me, he wanted the very first nandroid TWRP backup system files that I made immediately as soon as I got the update done because that is a perfectly clean backup and if you ever wanted to put your phone back to stock, that backup would do it.
Before giving up on Xposed and being sure that this was lousing up my phone; self boots, black screen, would not boot, bootloop, etc., I finally realized that this phone actually WORKS, man. It has to be the Xposed files,and modules that are causing the problems. And after removing all but the 2 I mentioned, the phone works great now. I will add more modules, very, very slowly and test each one for a couple of days before I clear it and dare add another one.
Ohmster said:
Actually my XT1575 is running and is in good shape now. I was lucky, @OldBaldy got on Hangouts with me and walked me through it. He sent me a large file which I believe to be the original stock rom for the Moto-X with a flash.bat file in so as long as you have your Windows drivers installed with ADB and Fastboot working. It took me the entire night to get that working with the correct drivers because Baldy had to go to bed.
The file I really needed for this is a 1.27 GB file, CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml_SHAWN5162.zip. He told me NOT to run the FLASH-ALL.bat inside because all he wanted to do was reset the WiFi radio from an Android 6 radio to an Android 5 radio. Baldy was really smart and edited the restore system bat file to a tiny little "StockROM_FlashModem.txt" and it worked! WiFi came right back!
After that, I had to use adb over USB to flash the system back to original lollipop with no root, take the OTA update, then flash the boot.image file, update done, then flash the boot.img before installing SuperSU and most of this we did with ADB over USB. You cannot flash BETA-SuperSU-v2.52.zip until you flash that boot.img file.
If I was smart, I would have copy/pasted all the adb stuff we did into a text file, but of course, I didn't. But yes it is all working quite well now.
BEWARE:
Xposed does work in MM but not everything. I had to go back to TWRP, remove Xposed, and then enable only a couple of them that I know are safe like AdBlocker and Greenify.
I cannot give you anymore details since I screwed it up myself a couple of times and ended up redoing it on my own and again with Baldy's help.
NOTE:
Baldy did want something out of all this help he was giving me, he wanted the very first nandroid TWRP backup system files that I made immediately as soon as I got the update done because that is a perfectly clean backup and if you ever wanted to put your phone back to stock, that backup would do it.
Before giving up on Xposed and being sure that this was lousing up my phone; self boots, black screen, would not boot, bootloop, etc., I finally realized that this phone actually WORKS, man. It has to be the Xposed files,and modules that are causing the problems. And after removing all but the 2 I mentioned, the phone works great now. I will add more modules, very, very slowly and test each one for a couple of days before I clear it and dare add another one.
Click to expand...
Click to collapse
Hi Ohmster. Thanks again. So are you on Marshmallow? I got back with your info above and back to 5.1.1 (CLETUS). I tried to take the OTA and it downloaded, went to install, and I watched it just say "error" while on the installation screen. I'm going to try again. Let me know if you all set or in the same boat Thanks again!
samwathegreat said:
Two points:
1. You can never ever ever take any OTA with a custom recovery (TWRP) installed. You MUST flash stock recovery prior to taking the OTA.
2. The update will fail if you have made ANY modifications to /system. This includes using TWRP to flash SuperSu to your device.
So if you just do a complete FULL return to stock and have a working lollipop installation, DO NOT INSTALL TWRP OR INSTALL SUPERSU. Take the OTA update. Afterwards you are free to go ahead and flash TWRP. I recommend IMMEDIATELY making a nandroid backup once you have taken the OTA and flashed TWRP.
I also suggest using the new "systemless root" method instead of the traditional root method. If you use systemless root, you won't need to restore /system (as long as you didn't modify it by flashing Xposed, Adaway, or similar. If a future OTA comes out with systemless root, you simply flash the stock kernel (which will unroot you), then accept the new update, then modify the boot image again to re-gain root.
To sum it up: *IF* you are 100% stock on lollipop (no TWRP, no SuperSU), you can go ahead and take the OTA. Afterwards, you can do whatever you would like (flash TWRP, SuperSU, etc). Just keep in mind that if you don't use the new systemless root, you will have to do a full return to stock AGAIN the next time an OTA comes out.
Good Luck.
Click to expand...
Click to collapse
nypeach said:
Hi Ohmster. Thanks again. So are you on Marshmallow? I got back with your info above and back to 5.1.1 (CLETUS). I tried to take the OTA and it downloaded, went to install, and I watched it just say "error" while on the installation screen. I'm going to try again. Let me know if you all set or in the same boat Thanks again!
Click to expand...
Click to collapse
Did you get back to stock using CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml_SHAWN5162.zip? I have still not gone through the process yet as I am concerned about messing up the process. I want to ask a few questions here. I am well accustomed to fastboot flashing but want to be exactly sure of what to flash and the reason for doing it. I am on stock 5.1.1 LP with bootloader unlocked and rooted with SuperSU. So first I need to use Shawn5162's zip to restore me back to complete stock without root, then I need to go in and setup the phone to at least get the MM OTA, then install the OTA and hope all goes well. Lastly, to root again I need to use Shawn5162's zip to flash boot.img only, then flash TWRP, and finally flash SuperSU again. Is all this correct? Thank you.
robn30 said:
Did you get back to stock using CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml_SHAWN5162.zip? I have still not gone through the process yet as I am concerned about messing up the process. I want to ask a few questions here. I am well accustomed to fastboot flashing but want to be exactly sure of what to flash and the reason for doing it. I am on stock 5.1.1 LP with bootloader unlocked and rooted with SuperSU. So first I need to use Shawn5162's zip to restore me back to complete stock without root, then I need to go in and setup the phone to at least get the MM OTA, then install the OTA and hope all goes well. Lastly, to root again I need to use Shawn5162's zip to flash boot.img only, then flash TWRP, and finally flash SuperSU again. Is all this correct? Thank you.
Click to expand...
Click to collapse
That is the correct firmware. You don't need to remove anything. All you need to do is flash recovery and system, reboot and take the OTA. Make sure you have the new TWRP ( 2.8.7.1 ) downloaded, the 2.8.7.0 won't work with the new bootloader. I used the modified boot image and supersu 2.52 because I did not care about modifying the system partition. You can use Supersu 2.62 for systemless root if you wish. If you're planning to use Xposed, then systemless gives you no added benefits.
Always, before starting something like this, make a nandroid!
Sent from my XT1575 using Tapatalk
OldBaldy said:
That is the correct firmware. You don't need to remove anything. All you need to do is flash recovery and system, reboot and take the OTA. Make sure you have the new TWRP ( 2.8.7.1 ) downloaded, the 2.8.7.0 won't work with the new bootloader. I used the modified boot image and supersu 2.52 because I did not care about modifying the system partition. You can use Supersu 2.62 for systemless root if you wish. If you're planning to use Xposed, then systemless gives you no added benefits.
Always, before starting something like this, make a nandroid!
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
So, I couldn't wait and already did it. I flashed Shawn5162's file in full. Then I took the OTA and updated perfectly. I have already installed TWRP 2.8.7.1 and made a nandroid of my Stock unrooted MM ROM. Now I want to root but want to make sure I understand this step perfectly. Which boot.img do I use? The ones in this thread http://forum.xda-developers.com/moto-x-style/general/root-moto-x-style-xt1572-br-marshmallow-t3259380? The boot.img in that thread is way smaller than the one in Shawn5162's LL zip tool. Just want to be sure I am doing this correctly. Lastly am I using the SU file in that thread as well and following those exact directions? Thanks.
robn30 said:
So, I couldn't wait and already did it. I flashed Shawn5162's file in full. Then I took the OTA and updated perfectly. I have already installed TWRP 2.8.7.1 and made a nandroid of my Stock unrooted MM ROM. Now I want to root but want to make sure I understand this step perfectly. Which boot.img do I use? The ones in this thread http://forum.xda-developers.com/mot...t-moto-x-style-xt1572-br-marshmallow-t3259380? The boot.img in that thread is way smaller than the one in Shawn5162's LL zip tool. Just want to be sure I am doing this correctly. Lastly am I using the SU file in that thread as well and following those exact directions? Thanks.
Click to expand...
Click to collapse
That boot img is for style only, not for pure. There is another called boot_root_mm_clark_retus.zip
Search for that file, it's the one you need for Supersu 2.5.2
You can use either supersu 252 of 256. I used 252 and have had no problems. If you have flashed TWRP, just put the supersu of your choice and the boot_root.zip files on you phone and flash with TWRP.
Sent from my XT1575 using Tapatalk
OldBaldy said:
That is the correct firmware. You don't need to remove anything. All you need to do is flash recovery and system, reboot and take the OTA. Make sure you have the new TWRP ( 2.8.7.1 ) downloaded, the 2.8.7.0 won't work with the new bootloader. I used the modified boot image and supersu 2.52 because I did not care about modifying the system partition. You can use Supersu 2.62 for systemless root if you wish. If you're planning to use Xposed, then systemless gives you no added benefits.
Always, before starting something like this, make a nandroid!
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
IGNORE ME My Bad.... Back at 5.1.1 and staying here for a while Thanks again for your awesome support. I really appreciate it.
nypeach said:
Hi OldBaldy. Sorry I'm still having a tough time. As mentioned, I got back to 5.1.1 per the above process. I read your latest note and flashed the latest twrp (2.8.7.1) and took the MM OTA. It's now flashing the "teamwin" screen over and over. Should I be patient or bail? Thanks again for your patience and help!!!
Click to expand...
Click to collapse
You have to take the OTA BEFORE you flash TWRP. What you need to do now is get back into fastboot and flash the stock recovery img from the 5.1.1 factory image. Then reboot into system and take the OTA. After it installs, then follow the above instructions.
Sent from my XT1575 using Tapatalk
robn30 said:
So, I couldn't wait and already did it. I flashed Shawn5162's file in full. Then I took the OTA and updated perfectly. I have already installed TWRP 2.8.7.1 and made a nandroid of my Stock unrooted MM ROM. Now I want to root but want to make sure I understand this step perfectly. Which boot.img do I use? The ones in this thread http://forum.xda-developers.com/moto-x-style/general/root-moto-x-style-xt1572-br-marshmallow-t3259380? The boot.img in that thread is way smaller than the one in Shawn5162's LL zip tool. Just want to be sure I am doing this correctly. Lastly am I using the SU file in that thread as well and following those exact directions? Thanks.
Click to expand...
Click to collapse
No, that is the wrong root img to flash prior to installing SuperSU 2.52.
File Type: zip boot_root_mm_clark_retus.zip - [Click for QR Code] (10.01 MB, 756 views)
The file you want is in this post #290
Ohmster said:
No, that is the wrong root img to flash prior to installing SuperSU 2.52.
File Type: zip boot_root_mm_clark_retus.zip - [Click for QR Code] (10.01 MB, 756 views)
The file you want is in this post #290
Click to expand...
Click to collapse
Yup, I realized that plus someone else informed me that wasn't the one. I got her all taken care of and she is up and running smooth as can be. The battery on MM is really good. I'm impressed. I also wrote up a huge how to on the whole process and posted it. Should contain all the necessary steps in one place now. It gets a bit crazy having to dig all over the place to gather all that is needed. These threads get quite large and finding stuff gets more difficult as the days go by.
Sent from my XT1575 using Tapatalk

moto x pure 6.0 mm ( root )

Tried everything flashing every supersu via twrp and just gets stuck at the moto logo. Tried systemless root and did the same thing. So thinking it was my kernel and flashed elementalx moto kernel ( frankenclark ) then tried to flash supersu once again with the same fail and noticed with that kernel I lost my wifi connection but ran it anyways but failed. After much forum browsing and that supersu just isn't for the MXPE I even went as far as kingroot to achieve root then slap supersu to keep root like I did with my kindle fire. I'm pretty lost for words here. I'm previously running resurection remix and works flawless but I do really like the original setup. Ps tried the stock rooted roms and they was a lil off and kept trying to ota update but failed because my bootloader is unlocked so I had to uninstall it. Just looking to root the original rom so I can keep all the moto apps. Looking forward to hearing the ideas. Thanks in advance.
Wow... So I assume you flashed back to pure stock?
Rooting is not difficult, there is only 2 ways to do it, either flash SuperSU 2.62-3 beta or the latest stable version with the "echo" command for systemless installations. Look at this thread (note the pictures in the OP are of my XT1575, I fudged a little) but the method is identical. If it doesn't work, no offense, but your not doing something right.
I have both pure stock in a restore and resurection remix in a restore which is pretty much my daily because the active display drives me nuts. And supersu 2.6.2 I haven't tried yet but the SR supersu I've flashed via twrp with the stock kernel and ( frankenclark ) kernel and it responded the same stuck at moto. I've flashed it via windroid toolkit also it shows it's installing without any failure but on boot up she says no way. And I've updated the toolkit to it's newest version and still ends up stuck at moto. I'm sure I'll figure it out and get it. And no offense on doing something wrong it's been known to happen. Some lg double tap to wake the screen would be nice over the active display.
fastjohnson said:
I have both pure stock in a restore and resurection remix in a restore which is pretty much my daily because the active display drives me nuts. And supersu 2.6.2 I haven't tried yet but the SR supersu I've flashed via twrp with the stock kernel and ( frankenclark ) kernel and it responded the same stuck at moto. I've flashed it via windroid toolkit also it shows it's installing without any failure but on boot up she says no way. And I've updated the toolkit to it's newest version and still ends up stuck at moto. I'm sure I'll figure it out and get it. And no offense on doing something wrong it's been known to happen. Some lg double tap to wake the screen would be nice over the active display.
Click to expand...
Click to collapse
It sounds like the install script for SuperSU is not doing a systemless install...
So you are flashing stock, booting at least once (this is required), the open TWRP and allow changes to system (In mounts make sure Mount System Read-Only is NOT checked), go to Advanced - Terminal and enter "echo SYSTEMLESS=true>>/data/.supersu" and press enter, then go to Install and select the SuperSU zip file and install it. It should clearly say it is doing a system-less install, patching boot image, etc. as shown in the first post of the link I shared a couple posts previous.
OK I tried this info word for word and tried multiple times and its still gets stuck on the moto logo, I don't get it.
I don't know... it's a puzzler.
2.62-3 and stop using toolkits.
lafester said:
2.62-3 and stop using toolkits.
Click to expand...
Click to collapse
I'm using twrp to obtain the root like specified. But I'll try adb commands and see if the version you mentioned will do it. I appreciate the help.
fastjohnson said:
I'm using twrp to obtain the root like specified. But I'll try adb commands and see if the version you mentioned will do it. I appreciate the help.
Click to expand...
Click to collapse
Well that worked perfectly the first try I used those terminal commands with that version SuperSU it rooted and booted right up like normal and started asking the SuperSU adb shell permission banners. Perfect guys maybe this thread will help some other poor soul to get root. Awesome advice that works. Thank you.
fastjohnson said:
Well that worked perfectly the first try I used those terminal commands with that version SuperSU it rooted and booted right up like normal and started asking the SuperSU adb shell permission banners. Perfect guys maybe this thread will help some other poor soul to get root. Awesome advice that works. Thank you.
Click to expand...
Click to collapse
Yeah, glad it's working... Did you read through the link I posted earlier? The 2.62-3 method was clearly described in the second post under Alternative Methods.
acejavelin said:
Yeah, glad it's working... Did you read through the link I posted earlier? The 2.62-3 method was clearly described in the second post under Alternative Methods.
Click to expand...
Click to collapse
No actually I didn't see it, lol probably would have helped made me not look dumb. Buy who am I kidding you guys love flexing you rooting muscles..
Deleted.

My ZE551KL only boots to TWRP (and various other fun)

Hi. I was enjoying Lineage OS's latest ROM (14.1) and wasn't able to enjoy the "nightly" updates because when I went to do the update, I found out I needed a compatible recovery to do so. I had TWRP sitting on my computer and would FASTBOOT Boot twrp.img to flash roms. When I saw you needed to install twrp to make the Nightly update feature work, I flashed it with fastboot. I also went ahead and decided to start from scratch with a fresh install and used the latest Nightly LIneage OS file . After it installed, it booted up great. But when I went to add many apps back to my phone, so many of them were not showing up in the play store. And when some did, it would say "Incompatible Device" So I went to my settings and decided to try out the Nightly update hoping maybe that was the problem. When it booted to TWRP, nothing happened. So I hit REBOOT. and no matter what I choose, it just boots back into TWRP. Even when I hold the power button down and let it boot back up. Without touching any volume buttons, it just boots into TWRP. I can't get back to my OS. I'm going to try to install Lineage OS again and just hope I can get to my phone to make sure I'm getting messages from friends, doctors, etc...
Any help on how to fix this would be appreciated. I used this site " http://www.androidinfotech.com/2016...2-laser-ze551kl-marshmallow-install-twrp.html "
to root my phone so I could use Titanium Backup. I'm hoping something in there didn't mess me up.
Thank you in advance.
-Fuzzy
Well dang. I tried installing LINEAGE OS rom again and hoped for some strange reason it would boot into it. TWRP just keeps loading. I try the Reboot command in TWRP then choose SYSTEM and it still just goes to TWRP.
Well sometimes it just helps to air your frustration. As is true with many things in life. Say it out loud. Etc...
I was sure I had THE latest version of TWRP installed when this was happening. I rechecked to make sure. I didn't. I was 1 version away. Fastboot flashed that and it's booting normally . For now. Now, to see if I can get those apps to show up in the play store.
Things like Snapchat, Facebook messenger, etc... would just not show up.
Nope. That's still a problem . I wonder why this is happening?
Try clearing dalvik cache and sync you data for your mail account. I think those app wil show up. As for snapchat, you can't install it via playstore you can't pass safetynet.
FuzzyFone said:
Hi. I was enjoying Lineage OS's latest ROM (14.1) and wasn't able to enjoy the "nightly" updates because when I went to do the update, I found out I needed a compatible recovery to do so. I had TWRP sitting on my computer and would FASTBOOT Boot twrp.img to flash roms. When I saw you needed to install twrp to make the Nightly update feature work, I flashed it with fastboot. I also went ahead and decided to start from scratch with a fresh install and used the latest Nightly LIneage OS file . After it installed, it booted up great. But when I went to add many apps back to my phone, so many of them were not showing up in the play store. And when some did, it would say "Incompatible Device" So I went to my settings and decided to try out the Nightly update hoping maybe that was the problem. When it booted to TWRP, nothing happened. So I hit REBOOT. and no matter what I choose, it just boots back into TWRP. Even when I hold the power button down and let it boot back up. Without touching any volume buttons, it just boots into TWRP. I can't get back to my OS. I'm going to try to install Lineage OS again and just hope I can get to my phone to make sure I'm getting messages from friends, doctors, etc...
Any help on how to fix this would be appreciated. I used this site " http://www.androidinfotech.com/2016...2-laser-ze551kl-marshmallow-install-twrp.html "
to root my phone so I could use Titanium Backup. I'm hoping something in there didn't mess me up.
Thank you in advance.
-Fuzzy
Click to expand...
Click to collapse
What version of TWRP have you used? If it's 3.0.2.4 and below, update it.
darkeyes22 said:
What version of TWRP have you used? If it's 3.0.2.4 and below, update it.
Click to expand...
Click to collapse
(As shown in Post #3)
Already updated it. I got that part of the problem fixed. Thanks tho! :good:
FuzzyFone said:
(As shown in Post #3)
Already updated it. I got that part of the problem fixed. Thanks tho! :good:
Click to expand...
Click to collapse
What do you mean by saying "part of the problem"? Maybe I can help you with the rest of it.
darkeyes22 said:
What do you mean by saying "part of the problem"? Maybe I can help you with the rest of it.
Click to expand...
Click to collapse
Hello. I'm running the latest version of LineageOS 14.1 (just installed the nightly update) and several of the apps close the second I launch them. Clock was the first one I noticed . Loading pictures to share in other apps from Quckpic. and other apps I can't remember right now.
So I wanted to backup everything and try a different Rom thinking I might not have those problems. I installed SU and TWRP and then Titanium Backup Pro. After installing SU I had root. This morning I went to run a current backup and it said I no longer had root.
Dang. I have to go to the Pain Clinic. Time always catches up with me so fast when trying to problem solve.
Thank yo for reaching out! I really appreciate it. Especially with a phone that's not so popular out there in the wild that it's limited on folks available for help. it's 9:16am where I'm at. I'll probably be back in a few hours from now.
Thanks again, DarkEyes.
-Fuzzy
FuzzyFone said:
Hello. I'm running the latest version of LineageOS 14.1 (just installed the nightly update) and several of the apps close the second I launch them. Clock was the first one I noticed . Loading pictures to share in other apps from Quckpic. and other apps I can't remember right now.
So I wanted to backup everything and try a different Rom thinking I might not have those problems. I installed SU and TWRP and then Titanium Backup Pro. After installing SU I had root. This morning I went to run a current backup and it said I no longer had root.
Dang. I have to go to the Pain Clinic. Time always catches up with me so fast when trying to problem solve.
Thank yo for reaching out! I really appreciate it. Especially with a phone that's not so popular out there in the wild that it's limited on folks available for help. it's 9:16am where I'm at. I'll probably be back in a few hours from now.
Thanks again, DarkEyes.
-Fuzzy
Click to expand...
Click to collapse
Re-check your root with Root Checker. If you still have it, flash su removal through TWRP and flash systemless SuperSU. If you don't have it, just install systemless SuperSU. After you do that, boot back to the system (your boot might loop once - it's normal, do not interrupt boot), give TB pro root access, and see if it helped.
darkeyes22 said:
Re-check your root with Root Checker. If you still have it, flash su removal through TWRP and flash systemless SuperSU. If you don't have it, just install systemless SuperSU. After you do that, boot back to the system (your boot might loop once - it's normal, do not interrupt boot), give TB pro root access, and see if it helped.
Click to expand...
Click to collapse
Hello. Sorry it took me long to reply. After appointment, I was in too much pain to get online.
I installed thru Fastboot "addonsu-remove-14.1-arm64-signed.zip" rebooted, then installed addonsu-14.1-arm64-signed.zip thru Fastboot too and rebooted. Still no root. I checked it with RootChecker and there was no root.
Running latest nightly of LineageOS.
FuzzyFone said:
Hello. Sorry it took me long to reply. After appointment, I was in too much pain to get online.
I installed thru Fastboot "addonsu-remove-14.1-arm64-signed.zip" rebooted, then installed addonsu-14.1-arm64-signed.zip thru Fastboot too and rebooted. Still no root. I checked it with RootChecker and there was no root.
Running latest nightly of LineageOS.
Click to expand...
Click to collapse
Through Fastboot? Try through TWRP, flash removal, then flash Systemless SuperSU (not the one you have now).
Here is the link to systemless SuperSU: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Hi
1st Step is Install official TWRP 3.1.1 which is availble for our device ze551kl aka Zool or ZooLD.
Boot in to TWRP
wipe cache+Dalvik cache+system+ASDF+internal storage.
now install Lineage rom latest version.
then gapps.
wipe dalvik cache.
hit Reboot system option
.it wlll not go in bootloop if u followed these steps which are guided by Devs here.
if u still facing bootloops u must have done extra ordinary thing with ur Device.
RonakRonak said:
Hi
1st Step is Install official TWRP 3.1.1 which is availble for our device ze551kl aka Zool or ZooLD.
Boot in to TWRP
wipe cache+Dalvik cache+system+ASDF+internal storage.
now install Lineage rom latest version.
then gapps.
wipe dalvik cache.
hit Reboot system option
.it wlll not go in bootloop if u followed these steps which are guided by Devs here.
if u still facing bootloops u must have done extra ordinary thing with ur Device.
Click to expand...
Click to collapse
It is Z00T that is ZE551KL, not Z00L. Do not even think about flashing something that was developed for Z00L on Z00T. It will not work.
Sent from my ASUS_Z00UD using XDA Labs
darkeyes22 said:
It is Z00T that is ZE551KL, not Z00L. Do not even think about flashing something that was developed for Z00L on Z00T. It will not work.
Sent from my ASUS_Z00UD using XDA Labs
Click to expand...
Click to collapse
Yes.i already mentioned model name.

RS988 21d OTA in the wild

The RS988 finally has a new OS update with Google patch level Dec 1st, and that means that we are finally good against blueborne and krack!
Sent from my RS988 using Tapatalk
I just installed it. It's about time. I was beginning to wonder if they had stopped support on the RS988. I hear the LG G5 is supposed to get Oreo, but I have a feeling that the RS988 will get left out based on how the updates have gone so far.
Hi! Has the modem changed?
I rooted my device with SuperSU and TRWP, is it advisable install this update? Won't it remove or disable the root access?
Nispero said:
I rooted my device with SuperSU and TRWP, is it advisable install this update? Won't it remove or disable the root access?
Click to expand...
Click to collapse
From what I know, in order to get the ota your bootloader needs to be the stock one, but I could not find it outside of full kdz packages.
I have not rooted yet waiting for this specific update (given the security fixes).
I would suggest you to backup all of your apps and settings with an app like Titanium Backup, flash stock, install the ota, reinstall TWRP, root and magisk and then restore apps and settings from the backup
Sent from my RS988 using Tapatalk
kattolo said:
From what I know, in order to get the ota your bootloader needs to be the stock one, but I could not find it outside of full kdz packages.
I have not rooted yet waiting for this specific update (given the security fixes).
I would suggest you to backup all of your apps and settings with an app like Titanium Backup, flash stock, install the ota, reinstall TWRP, root and magisk and then restore apps and settings from the backup
Sent from my RS988 using Tapatalk
Click to expand...
Click to collapse
Sorry for asking, but where do I get the flash stock? I loaded SuperSU-v2.82-SR5-20171001224502.zip and TWRP-3.0.2-1-RS988.img to root after unlocking the bootloader
spinoza_web said:
Hi! Has the modem changed?
Click to expand...
Click to collapse
I'm not completely sure (did not write down the previous baseband)
I'm attaching the current info
Nispero said:
Sorry for asking, but where do I get the flash stock? I loaded SuperSU-v2.82-SR5-20171001224502.zip and TWRP-3.0.2-1-RS988.img to root after unlocking the bootloader
Click to expand...
Click to collapse
the best source of full stock roms as well as info on the phone I could find so far is https://forum.xda-developers.com/lg-g5/how-to/info-autos-g5-thread-t3350648
The way I had to update was to flash 21a and then take OTA's up to 21d because when I flashed 21c back to stock using TWRP and tried to update it gave me an error and then rebooted and said I can't update because I had rooted the device.
kattolo said:
I'm not completely sure (did not write down the previous baseband)
I'm attaching the current info
Click to expand...
Click to collapse
Here's the baseband version with RS98821c: MPSS.TH.2.0.c1.4-00047-M8996FAAAANAZM-1.88674.1.101802.1
The numbers are slightly different at the end compared to RS98821d , but I'm not sure what if anything might have changed.
maybe, for getting OTA should we just get unroot? How to do it properly?
If recovery is not the stock one, it will not be possible to install the OTA.
Alternatively you might need to wait for someone to make a flashable zip you could flash with TWRP, but given the fact development on this phone is not too active you might need to wait for a while before is available
Sent from my RS988 using Tapatalk
Awkydee said:
The way I had to update was to flash 21a and then take OTA's up to 21d because when I flashed 21c back to stock using TWRP and tried to update it gave me an error and then rebooted and said I can't update because I had rooted the device.
Click to expand...
Click to collapse
I was also planning on flashing the complete 21c zip so that I could take the 21d OTA. Glad to know that might not work.
Anyone know if it would be possible to install just the stock 21c recovery image? It's my understanding that having a custom recovery installed is what makes the OTA installation fail. If TWRP is what's getting in the way of installing the OTA, wouldn't replacing TWRP with stock recovery solve the problem without touching the system? If anyone who knows more about this stuff than me could chime in, I'd appreciate it.
brewerywagon said:
I was also planning on flashing the complete 21c zip so that I could take the 21d OTA. Glad to know that might not work.
Anyone know if it would be possible to install just the stock 21c recovery image? It's my understanding that having a custom recovery installed is what makes the OTA installation fail. If TWRP is what's getting in the way of installing the OTA, wouldn't replacing TWRP with stock recovery solve the problem without touching the system? If anyone who knows more about this stuff than me could chime in, I'd appreciate it.
Click to expand...
Click to collapse
First I flashed the magisk uninstaller and rebooted back to recovery. Then I flashed the 21c COMPLETE ZIP and didn't flash magisk so it would replace TWRP with the stock recovery on reboot. Then I rebooted and when I tried to update it went to the stock and threw up an error then rebooted. Upon reboot it displayed a message saying that I couldn't update because my device had been rooted. So I rebooted back in to bootloader and flashed TWRP again. Then I flashed 21a COMPLETE ZIP and no magisk so that the stock recovery would replace TWRP. I rebooted and went through setup and took OTA updates until I was on 21d. Then rebooted back into bootloader and flashed TWRP. Then rooted and we've through setup. I tried every other way but this was the only way that worked for me. I hope it helps!
should be an easier way. Did u see some changes to the radio?
Some of you may remember that last year I had the misfortune of installing the Brightpoint ROM on my Unlocked G5, which completely messed the phone up by not allowing it to connect to AT&T's LTE. It was a process to re-flash the older ROMs/Bootloader and then rebuild it to a stable 21c. I had used it for a while like that, and the only problem I had was that when ending a voice call (HSPA) it would take a while to change back to LTE.
I ended up going with the S8 over the summer (Samsung discount + Note 2 trade in) which got it for $18/month. I've been using it ever since and the LTE to HSPA Voice to LTE change-off on the S8 is done within a second, unlike the G5.
My mom had been using an unlocked Samsung S5 for almost a year now, and it's constantly dropping calls, and this past week it froze on her and required a battery pull, so was thinking of having her try out my (unused) G5 to see if she liked it more. When I turned the G5 on today, I updated all the apps, and then installed the 21d OTA update. The hand-off from voice to LTE still is not as fast as my S8, but seems to be improved from the 21c firmware.
ROM Posted
Just to let you all know, I have posted the latest 21d stock ROM in my thread here: https://forum.xda-developers.com/lg-g5/development/stock-21c-roms-flashable-zips-imgs-t3679907
Hi. After 21d received my phone starts to rebbot when I try to play music on phone. No matter if this is stock player or google music. After self reboot music plays normally but if I click pause and wait until first stand by mode, the problem returns. Want to ask you guys to check if you have the same problem or I should download full version of 21d and check if the problem still exists. Thanks.
ingressor said:
Hi. After 21d received my phone starts to rebbot when I try to play music on phone. No matter if this is stock player or google music. After self reboot music plays normally but if I click pause and wait until first stand by mode, the problem returns. Want to ask you guys to check if you have the same problem or I should download full version of 21d and check if the problem still exists. Thanks.
Click to expand...
Click to collapse
I'm not having any reboot issues when playing music.

Categories

Resources