Database Users

H812 Rogers Canada Rooted System Image

ROGERS H812 v10h ROOTED SYSTEM IMAGE
Here ya go, gents!
I know there are some Rogers users here, and most of us don't have easy access to Ubuntu to inject root.
I got Ubuntu up and running via VM, so I thought i'd root the new Rogers version 10h for us.
Thanks to greganka for the system image for me to root.
The instructions for how to flash it can be found in hackarchive's "Root ANY LG G4 Variant 100% Success Directives | Root Injection | Less Bricks" thread. Thanks to him for that.
The correct strings can be found in autoprime's thread HERE.
As usual, I will not be held responsible if you happen to brick your phone flashing this image, by picking the wrong command, etc.
ROGERS 10h Rooted System Image.
Enjoy!

Been looking around for this. Thank you so much!

If I'm currently on the rooted 10b update can I just flash the system image and call it a day?

spartan268 said:
If I'm currently on the rooted 10b update can I just flash the system image and call it a day?
Click to expand...
Click to collapse
Yep. It will be a day...a day of fixing all the issues you will have, lol.
You need to flash the full 10h KDZ first, THEN the rooted System Image, or you will have tons of issues.

If I'm currently on the 10f Telus rooted firmware, and wanna get my Rogers rooted 10h firmware back, how do I go about it?
Do I just follow the same steps I did to update to the Telus? 10h KDZ then flash new image?

850T5m said:
If I'm currently on the 10f Telus rooted firmware, and wanna get my Rogers rooted 10h firmware back, how do I go about it?
Do I just follow the same steps I did to update to the Telus? 10h KDZ then flash new image?
Click to expand...
Click to collapse
Yep! I recommend a factory reset after though. I know it's a pain, but VoLTE isn't working for some of us after using the Telus 10f then going to the Rogers 10h.
I tried everything to figure it out. I finally did a factory reset, and VoLTE and video calling is working again. I think since Telus doesn't support it, their software breaks it on Rogers phones, even after you flash a Rogers KDZ again.
Just FYI. You can dirty flash the Rogers 10h KDZ and then my rooted system image, and if VoLTE works (and you are actually with Rogers), then leave it. If it doesn't, try a factory reset.

GibMcFragger said:
ROGERS H812 v10h ROOTED SYSTEM IMAGE
Here ya go, gents!
I know there are some Rogers users here, and most of us don't have easy access to Ubuntu to inject root.
I got Ubuntu up and running via VM, so I thought i'd root the new Rogers version 10h for us.
Thanks to greganka for the system image for me to root.
The instructions for how to flash it can be found in hackarchive's "Root ANY LG G4 Variant 100% Success Directives | Root Injection | Less Bricks" thread. Thanks to him for that.
As usual, I will not be held responsible if you happen to brick your phone flashing this image, by picking the wrong command, etc.
ROGERS 10h Rooted System Image.
Enjoy!
Click to expand...
Click to collapse
Thanks a lot! I downloaded it.
I am wondering though, if I were to root after backing up stock system image, how can I restore my phone to stock without root to take OTAs? Can I simply flash stock system image? or do I really need to flash the kdz?

You should just be able to use the "full unroot" option in Supersu, but yes, flashing your original image would also do it.

I work in Burnaby you wanna root it for me haha jk
10h better be worth it for the trouble we have to go through

spartan268 said:
I work in Burnaby you wanna root it for me haha jk
10h better be worth it for the trouble we have to go through
Click to expand...
Click to collapse
Lol it's easy to root if you read the instructions in the root thread. As long as you have windows. I did the hard work already for you by installing Ubuntu and actually injecting root into the system image. All you have to do is flash it.
As for the update, it fixes the touchscreen and the lag. Definitely worth it.

GibMcFragger said:
ROGERS H812 v10h ROOTED SYSTEM IMAGE
Here ya go, gents!
I know there are some Rogers users here, and most of us don't have easy access to Ubuntu to inject root.
I got Ubuntu up and running via VM, so I thought i'd root the new Rogers version 10h for us.
Thanks to greganka for the system image for me to root.
The instructions for how to flash it can be found in hackarchive's "Root ANY LG G4 Variant 100% Success Directives | Root Injection | Less Bricks" thread. Thanks to him for that.
As usual, I will not be held responsible if you happen to brick your phone flashing this image, by picking the wrong command, etc.
ROGERS 10h Rooted System Image.
Enjoy!
Click to expand...
Click to collapse
Should we rename the system image to to the current update or do we just use "rootedsystem" as the img. name in the send command?

boywithabeard said:
[/HIDE]
Should we rename the system image to to the current update or do we just use "rootedsystem" as the img. name in the send command?
Click to expand...
Click to collapse
Nope. Leave it as is. The flash command is already set to flash it with that name. Just copy it to your internal SD, put your phone in download/send command mode, then copy/paste the correct string for the H812.
It's all in that thread I mentioned above. Just make sure you use the correct string for the H812, or you will create a nice leather backed door stop.

GibMcFragger said:
Nope. Leave it as is. The flash command is already set to flash it with that name. Just copy it to your internal SD, put your phone in download/send command mode, then copy/paste the correct string for the H812.
It's all in that thread I mentioned above. Just make sure you use the correct string for the H812, or you will create a nice leather backed door stop.
Click to expand...
Click to collapse
I think I understand the question of the person who posted before you. I'm about to root and need to know the following:
Should the command be this:
dd if=/data/media/0/rootedsystem.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
or this:
dd if=/data/media/0/system.rooted.rogers.v10b.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
Also, what is the command to RESTORE the stock image over rooted one? I want to document all of that on my PC.

I'm not at home to verify if that is the correct H812 string, but the image should be called "rootedsystem.img".
If you get look at the thread I mentioned in the first post, it has the EXACT string you need, just copy and paste it. That way there is no mistyping. bottom line, DO NOT RENAME THE ROOTED SYSTEM IMAGE FILE. It's all in that thread. Read it, and everyone's questions will be answered!

The restore string is the same, with the exception of the file name (system.img vs rootedsystem.img).
Again, all in that thread.

Ramsey said:
I think I understand the question of the person who posted before you. I'm about to root and need to know the following:
Should the command be this:
dd if=/data/media/0/rootedsystem.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
or this:
dd if=/data/media/0/system.rooted.rogers.v10b.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0
Also, what is the command to RESTORE the stock image over rooted one? I want to document all of that on my PC.
Click to expand...
Click to collapse
http://forum.xda-developers.com/g4/...l-variants-soon-root-lg-t3164765/post62028523 This is the thread for injecting root and backing-up sytem .img on various g4 models. your first string is for rooting. but it is wise to backup your system.img first just in case the root flashing is not successful. the command to back-up your phone (h812)is all there just copy and paste. the command for flashing your backup, just erase the "rooted" line just put in "system.img" on the string command and you can flash your system.img backup.

GibMcFragger said:
I'm not at home to verify if that is the correct H812 string, but the image should be called "rootedsystem.img".
If you get look at the thread I mentioned in the first post, it has the EXACT string you need, just copy and paste it. That way there is no mistyping. bottom line, DO NOT RENAME THE ROOTED SYSTEM IMAGE FILE. It's all in that thread. Read it, and everyone's questions will be answered!
Click to expand...
Click to collapse
I did follow the thread in your first post but it tells us to go to another page to get the string and that string actually has the old "system.rooted.rogers.v10b.img" instead of rootedsystem.img!
That's why I wanted to confirm.
Thanks though, it worked fine.
The link posted by gerby has the correct string. Lots of strings online lol.

Um...I used that one too. The link it takes you to is HERE, and it's rootedsystem.img for all the models. I don't know where you read "system.rooted.rogers.10b.img", but it's not where it links you.

GibMcFragger said:
Um...I used that one too. The link it takes you to is HERE, and it's rootedsystem.img for all the models. I don't know where you read "system.rooted.rogers.10b.img", but it's not where it links you.
Click to expand...
Click to collapse
great job
tyfoxx

Oh wow. Thanks a ton! Not looking forward to downloading the whole 4.2gb though
Actually, now that I'm seeing that it's gotten to about 34MB in 5 minutes, it doesn't look like I'm going to be able to do this.
Thanks for doing it though!
Edit: After a router reset, it's going a bit quicker. Still gonna take a long while.

Official Boost LG G Stylo Unbrick Guide ZV5

I personally Tested this
This system.img works on both Virgen Mobile and Sprint Variants as well, I personally didn't test but other brave souls did
I can't believe i have to post this but if your on ZV4 rooted or not don't flash the ZV5 system.img as it only works if your on ZV5 the VZ4 guide is over here
Attention if you try this and end up with a brick or your device transforms and tries to destroy you; it's not my fault you did this not me. So just read all of this thread not just the O.P (and read the O.P more then once) to get out of a bind if you reply with "the thread is too long i wont read it please help" don't expect anything short of "there's a search bar use it"
here is the ZV5 update zip https://www.androidfilehost.com/?fid=24052804347825955
Continue only if you have messed with the /system partition (and don't remember what you changed) and you are on 5.1.1 this will remove root but you will keep your data
Okay well now
Make sure you have a Windows PC
Download the LG Drivers from here
Download this 5.1.1 System.img
Place downloaded img to your external SD via adapter or through a spare phone you have
Now place SD back into your phone
Reboot your device into download mode
Download this folder and unzip it to your desktop:
Run ports.bat from within the extracted folder, to find your correct port (use the one with: LGVZANDNETDIAG1)
In the LG_Root folder hold shift and right click and choose open command windows here
Type
Code:
Send_Command.exe \\.\COM6
(Make sure your COM port number is correct, it varies)
Type
Code:
dd if=/storage/external_SD/system.img bs=8192 seek=42816 count=327680 of=/dev/block/mmcblk0
you will see a flashing _ line instead of the # let it do it's thing you will know it finished when the # shows back up
Type
Code:
LEAVE
and press enter and let your device reboot

Updating to the ZV5 update wont break root right? And i dont have to unroot to update?

_Cristian_ said:
Updating to the ZV5 update wont break root right? And i dont have to unroot to update?
Click to expand...
Click to collapse
you must flash ZV4system.img to remove all traces of root then use ZV5 update.zip to make everything work without a hitch and yes you can root after the update

I flashed this rom and now im stuck at LG logo with Security Error. Do you know why?

bawanyh said:
I flashed this rom and now im stuck at LG logo with Security Error. Do you know why?
Click to expand...
Click to collapse
Were you already on ZV5?

6th_Hokage said:
Were you already on ZV5?
Click to expand...
Click to collapse
No ZV4 rooted.
---------- Post added at 01:09 PM ---------- Previous post was at 12:58 PM ----------
Does anyone have any KDZ file for this phone?

bawanyh said:
No ZV4 rooted.
---------- Post added at 01:09 PM ---------- Previous post was at 12:58 PM ----------
Does anyone have any KDZ file for this phone?
Click to expand...
Click to collapse
read the OP very carefully, why do people think that they can update with the ZV5 system.img :/ and the reason i made the ZV4 and ZV5 unbrick Guides is because the Boost Variant doesn't have a kdz file

Actually that is the guide I followed and flashed the Zv4 first and got that Security error. Thats why I tried ZV5.

Ok I just flashed the Zv4 again, it took away security error but got stuck on LG logo. I flashed the update.zip in this thread and still same thing. Anything else I can try?

bawanyh said:
Ok I just flashed the Zv4 again, it took away security error but got stuck on LG logo. I flashed the update.zip in this thread and still same thing. Anything else I can try?
Click to expand...
Click to collapse
you may permanent brick....did you copy and paste the commands i wrote?? cause every space matters...

6th_Hokage said:
read the OP very carefully, why do people think that they can update with the ZV5 system.img :/ and the reason i made the ZV4 and ZV5 unbrick Guides is because the Boost Variant doesn't have a kdz file
Click to expand...
Click to collapse
6th_Hokage said:
you may permanent brick....did you copy and paste the commands i wrote?? cause every space matters...
Click to expand...
Click to collapse
Yes I am fimiliar with Send Command I use it everyday to fix LG softwares and to root. The system img loads just fine but still stays stuck on LG. Do you think I should try what someone else is suggesting in other thread (load 5.0.2, then Zv4 and then Zv5 update.zip)?

bawanyh said:
Yes I am fimiliar with Send Command I use it everyday to fix LG softwares and to root. The system img loads just fine but still stays stuck on LG. Do you think I should try what someone else is suggesting in other thread (load 5.0.2, then Zv4 and then Zv5 update.zip)?
Click to expand...
Click to collapse
how long did it stay on the LG Screen cause after a unbrick it doesn't show the boot animation just Lg Screen then the updating apps screen

How long can I expect step 11 to take? I am going on 20 minutes now...

sorheim said:
How long can I expect step 11 to take? I am going on 20 minutes now...
Click to expand...
Click to collapse
yea that's too long it took me like 3-10 minutes

Are you guys sure you are using boost stylos? Since that system.img is from a boost mobile stylo...

Finally i can post! thanks man...your system.img and the update.zip got me goin again. really appreciate your time and hard work. need a tester? got two BOOST stylos...so fire away. anytime. THANK YOU!:good::good::good:

im on ls751 lg volt2
can i back up my system.img and using the method like this when it is bricked

iorikyo645123 said:
im on ls751 lg volt2
can i back up my system.img and using the method like this when it is bricked
Click to expand...
Click to collapse
I suppose you can if your system.img is untouched. But you would need to know the command to send your system.img, since they will be different sizes.

iorikyo645123 said:
im on ls751 lg volt2
can i back up my system.img and using the method like this when it is bricked
Click to expand...
Click to collapse
You need to backup your current system as a system.img before you try to restore with my method....this doesn't pull your system but restore the one I provided

@6th_Hokage so you used the zv4 system.img to go stock then update to zv5? I'm a little worrisome that i'll brick my stylo if i try to use the zv4 system.img, lol. Sorry about all the question btw.

i have a moto G4 that crashes when i flash supersu on it

So i can unlock my bootloader on the moto G4 and install TWRP but when i flash SuperSU the devices crashes and i have to reflash the stock firmware as you can guess this extremley annoying thanks any help would be very much appreciated.

yes. this behaviour has been confirmed by several moto g4 users, including myself.
unlock bootloader - OK
install TWRP - OK
root with supersu ? - N...............................O!

libralibra said:
yes. this behaviour has been confirmed by several moto g4 users, including myself.
unlock bootloader - OK
install TWRP - OK
root with supersu ? - N...............................O!
Click to expand...
Click to collapse
Have you tried the manual systemless method?
Open TWRP, then go to Advanced -> Terminal and enter:
echo SYSTEMLESS=true>>/data/.supersu
then flash SuperSU?

acejavelin said:
Have you tried the manual systemless method?
Open TWRP, then go to Advanced -> Terminal and enter:
echo SYSTEMLESS=true>>/data/.supersu
then flash SuperSU?
Click to expand...
Click to collapse
thanks for the recommendation. saw this method today.
however, i am quite happy with it now. not sure if i'm going to root or not. maybe later.

acejavelin said:
Have you tried the manual systemless method?
Open TWRP, then go to Advanced -> Terminal and enter:
echo SYSTEMLESS=true>>/data/.supersu
then flash SuperSU?
Click to expand...
Click to collapse
i haven't tried it yet but just about to thanks hope it works

acejavelin said:
Have you tried the manual systemless method?
Open TWRP, then go to Advanced -> Terminal and enter:
echo SYSTEMLESS=true>>/data/.supersu
then flash SuperSU?
Click to expand...
Click to collapse
Thanks it worked

help
craigwilson9955 said:
Thanks it worked
Click to expand...
Click to collapse
hey sir can u kindly please post a download link for the supersu zip thanks

madscientistdam said:
hey sir can u kindly please post a download link for the supersu zip thanks
Click to expand...
Click to collapse
https://download.chainfire.eu/696/supersu/

acejavelin said:
Have you tried the manual systemless method?
Open TWRP, then go to Advanced -> Terminal and enter:
echo SYSTEMLESS=true>>/data/.supersu
then flash SuperSU?
Click to expand...
Click to collapse
You should make a new thread with this info, I see a lot of people getting hit with it

altimax98 said:
You should make a new thread with this info, I see a lot of people getting hit with it
Click to expand...
Click to collapse
Lol... I don't even have a G4, I currently have a G3, its the same way on that one, I just came here to check out the community when I saw how cheap they were on Amazon... I will do a quick tutorial making some basic assumptions about the G4 and it's similarity to other handsets
BTW, the systemless method is not new or exclusive to Moto... The info is out there if you know what to look for.
Sent from my MotoG3 using Tapatalk

acejavelin said:
Lol... I don't even have a G4, I currently have a G3, its the same way on that one, I just came here to check out the community when I saw how cheap they were on Amazon... I will do a quick tutorial making some basic assumptions about the G4 and it's similarity to other handsets
BTW, the systemless method is not new or exclusive to Moto... The info is out there if you know what to look for.
Click to expand...
Click to collapse
I know it isn't, but if you don't do systemless on the G4 it fails to boot. I'm seeing a lot of people saying to flash new firmware or a system partition. All you need to do is run your code in the TWRP terminal and reflash superSU and it boots fine.

altimax98 said:
I know it isn't, but if you don't do systemless on the G4 it fails to boot. I'm seeing a lot of people saying to flash new firmware or a system partition. All you need to do is run your code in the TWRP terminal and reflash superSU and it boots fine.
Click to expand...
Click to collapse
Done... Here ya go: http://forum.xda-developers.com/moto-g4/how-to/how-to-root-g4-fix-bootable-attempted-t3417592

craigwilson9955 said:
https://download.chainfire.eu/696/supersu/
Click to expand...
Click to collapse
will it erase all your data after rooting using this method?
i got twrp recovery, then use it for long time (or long enough to have filled so many files). if the root will erase all internal, i have to think about it. another question is about the OTA. can we get any OTA updates in the future after TWRP/rooting?

Help me rooting my G4 Plus on Nougat!

I was running Resurrection Remix (mm) until Nougat started rolling out. I flashed stock firmware(MM) and manually installed the Nougat update. That obviously voided my root access. Now, when I try to flash SuperSU, the device is not booting into the system and stays in the bootloader itself.
Anyone on Nougat who's rooted or anyone who has any idea what this is about, please help.

Surioz07 said:
I was running Resurrection Remix (mm) until Nougat started rolling out. I flashed stock firmware(MM) and manually installed the Nougat update. That obviously voided my root access. Now, when I try to flash SuperSU, the device is not booting into the system and stays in the bootloader itself.
Anyone on Nougat who's rooted or anyone who has any idea what this is about, please help.
Click to expand...
Click to collapse
in twrp > advanced> terminal
type
Code:
echo "SYSTEMLESS=true" > /data/.supersu
worked for me

​
Alpha_wolf said:
in twrp > advanced> terminal
type
Code:
echo "SYSTEMLESS=true" > /data/.supersu
worked for me
Click to expand...
Click to collapse
You tried it with which version?
I tried it with v2.78 and it broke my wifi and mobile data

Uninstall SuperSU / restore stock boot.img and try following my guide: [GUIDE] How to root Nougat on Moto G4 Plus

Aakash khatu1 said:
​You tried it with which version?
I tried it with v2.78 and it broke my wifi and mobile data
Click to expand...
Click to collapse
use his method its less work haha

Alpha_wolf said:
thats the one i used but i did an odd process to get 7.0 and root on my moto g4 plus xt1644
i flashed xt1643 firmware set it up on wifi and all accounts updated from zip
installed twrp and supersu
let me repeat it
Click to expand...
Click to collapse
I rooted with phh superuser without any issue

doomed151 said:
Uninstall SuperSU / restore stock boot.img and try following my guide: [GUIDE] How to root Nougat on Moto G4 Plus
Click to expand...
Click to collapse
i like your method better lol
i tip my hat to you good sir lol
---------- Post added at 08:40 PM ---------- Previous post was at 08:38 PM ----------
Aakash khatu1 said:
I rooted with phh superuser without any issue
Click to expand...
Click to collapse
i figured it would be easier and less hoops haha

doomed151 said:
Uninstall SuperSU / restore stock boot.img and try following my guide: [GUIDE] How to root Nougat on Moto G4 Plus
Click to expand...
Click to collapse
I would love to try this. Can you tell me what the two LOC essentially do?

Surioz07 said:
I would love to try this. Can you tell me what the two LOC essentially do?
Click to expand...
Click to collapse
If you mean noverity and nocrypt, noverity means it disables dm-verity which allows you to modify /system and nocrypt is just no encryption for /system partition iirc.

doomed151 said:
Uninstall SuperSU / restore stock boot.img and try following my guide: [GUIDE] How to root Nougat on Moto G4 Plus
Click to expand...
Click to collapse
I tried your method and I couldn't flash the zip file. It said 'No MD5 file found'!

Alpha_wolf said:
in twrp > advanced> terminal
type
worked for me
Click to expand...
Click to collapse
When exactly am I supposed to do this? After I flash the supersu zip file?

Moto G5 Plus Stock ROM

I did factory reset my Moto G5 Plus, and now I am left with custom ROMs only. Where can I download the stock Motorola ROM for the Moto G5 Plus?

mstoic said:
I did factory reset my Moto G5 Plus, and now I am left with custom ROMs only. Where can I download the stock Motorola ROM for the Moto G5 Plus?
Click to expand...
Click to collapse
Check here: https://mirrors.lolinet.com/firmware/moto/potter/official/
Anyways you should always make backups in twrp :good:

tywinlannister7 said:
Check here: https://mirrors.lolinet.com/firmware/moto/potter/official/
Anyways you should always make backups in twrp :good:
Click to expand...
Click to collapse
Thanks a ton. I will surely backup everything right after installing TWRP from now on.

I'm on stock ROM NPN25.137-15, rooted with TWRP installed. Can I just upgrade it to NPN25.137-35 by downloading the zip from above link and flash it under TWRP?

anoop.ch said:
I'm on stock ROM NPN25.137-15, rooted with TWRP installed. Can I just upgrade it to NPN25.137-35 by downloading the zip from above link and flash it under TWRP?
Click to expand...
Click to collapse
I have the same questions are the linked files flashable in TWRP? My stock backup is rooted and now I can't play Pokemon GO. Just looking for the easiest way to unroot my stock rom. Thanks!

anoop.ch said:
I'm on stock ROM NPN25.137-15, rooted with TWRP installed. Can I just upgrade it to NPN25.137-35 by downloading the zip from above link and flash it under TWRP?
Click to expand...
Click to collapse
No Stock ROM can not be flashed via twrp, only the OTA zips can be flashed via stock Recovery. This is the link to the fastboot ROM.
emoney1219 said:
I have the same questions are the linked files flashable in TWRP? My stock backup is rooted and now I can't play Pokemon GO. Just looking for the easiest way to unroot my stock rom. Thanks!
Click to expand...
Click to collapse
As I mentioned above. Moreover you can flash UnSU and then root using Magisk. Magisk allows hiding root detection for Safetynet.

tywinlannister7 said:
No Stock ROM can not be flashed via twrp, only the OTA zips can be flashed via stock Recovery. This is the link to the fastboot ROM.
As I mentioned above. Moreover you can flash UnSU and then root using Magisk. Magisk allows hiding root detection for Safetynet.
Click to expand...
Click to collapse
Where would I find UnSU if you don't mind my asking?

emoney1219 said:
Where would I find UnSU if you don't mind my asking?
Click to expand...
Click to collapse
Everything is on xda. just search before posting
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893

tywinlannister7 said:
Everything is on xda. just search before posting
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
Click to expand...
Click to collapse
Never knew UnSU existed, thanks for the link. It seems to have worked, thanks.

Can't lock the bootloader
mstoic said:
Thanks a ton. I will surely backup everything right after installing TWRP from now on.
Click to expand...
Click to collapse
Hi. I am not able to lock the bootloader. As soon I enter the command
Code:
fastboot oem lock
CMD gives me the error "Still require signed boot.img"

tywinlannister7 said:
Check here: https://mirrors.lolinet.com/firmware/moto/potter/official/
Click to expand...
Click to collapse
Hi,
Where is the stock firmware for the EU version? Moto G5 Plus XT1685 3/32GB

tywinlannister7 said:
Check here: https://mirrors.lolinet.com/firmware/moto/potter/official/
Anyways you should always make backups in twrp :good:
Click to expand...
Click to collapse
Hi, i downloaded the zip file, but how do i install it? Can you point me to a tutorial or something?
Thank you
Hi, i followed this = https://forum.xda-developers.com/showpost.php?p=67031808&postcount=4
Got it
Thanks

pablofior said:
Hi, i downloaded the zip file, but how do i install it? Can you point me to a tutorial or something?
Thank you
Click to expand...
Click to collapse
Assuming that you have set up adb/fastboot drivers, extract all the rom files to that folder and type in the commands mentioned here :
https://pastebin.com/ZWTaWuyr

tywinlannister7 said:
Assuming that you have set up adb/fastboot drivers, extract all the rom files to that folder and type in the commands mentioned here :
https://pastebin.com/ZWTaWuyr
Click to expand...
Click to collapse
Thank you but i found here on XDA a tutorial to flash stock rom on G4 and it worked for me.

mstoic said:
Hi. I am not able to lock the bootloader. As soon I enter the command
Code:
fastboot oem lock
CMD gives me the error "Still require signed boot.img"
Click to expand...
Click to collapse
I have the same issue.
I also get these errors:
http://imgur.com/a/mRKEz
Is there a way to relock the bootloader?

tywinlannister7 said:
Assuming that you have set up adb/fastboot drivers, extract all the rom files to that folder and type in the commands mentioned here :
https://pastebin.com/ZWTaWuyr
Click to expand...
Click to collapse
I unlocked the bootlader and rooted the phone before giving it to my wife. During that whole process, fastboot had no problems recognizing the phone (obviously). Then my wife tried to update via the OTA which got her stuck in TWRP. I'd like to reflash the stock ROM, but the problem I have is I can't use fastboot to do commands line by line (as shown in the link above) since "fastboot devices" doesn't show my phone anymore. I was able to get her going on a custom ROM for now, but I'd like to put her back on the stock ROM so we won't encounter this problem again. I've reinstalled the Motorola driver several times, but no luck. ADB has no problems recognizing the phone when in recovery. One thing that happened recently was a big update to Windows 10, but I'm not sure if that is the reason for my fastboot issues.
I intend to give it a go on another computer once I get the phone again from the wife, but any advice until then would be appreciated.

Thanks. I've installed a custom ROM but im not happy with the results (specially the poor camera performace). Will this "undo" everything? I mean, stock apps, stock widgets, etc etc? (don't care if the bootloader stays unlocked and the warning moto message while booting). I know this may be a stupid question, but like Homer would say: "it's my first day"

manos78 said:
Hi,
Where is the stock firmware for the EU version? Moto G5 Plus XT1685 3/32GB
Click to expand...
Click to collapse
Did u find it?

WiteFlash said:
I intend to give it a go on another computer once I get the phone again from the wife, but any advice until then would be appreciated.
Click to expand...
Click to collapse
Just a follow up to my previous post, I tried uninstalling/reinstalling the Motorola driver and ADB on the original computer, but for some reason it still won't "see" the phone in fastboot. I was able to install ADB/Fastboot and the Motorola driver on a separate computer (also Windows 10) to get fastboot to recognize the phone so I could issue commands to reinstall the stock firmware. I noticed, though, that the following commands FAILED when I entered them:
fastboot erase customize
fastboot erase clogo
I'm not sure what those were for, but the phone seems to be working fine on the stock firmware now.

I flashed the one in the retail folder and it says ret-EU in the settings so flash that one