Hey im new around the forums, and i just tried out a wm6.5 ROM, I don't remember who it was from tho, but i woke up today (7/1/09) and there was a message
'this concludes the beta test of the software release. thank you very much for your time and effort in helping make this a great product for our customers.
to obtain a newer release or further information, please revisit the website that you used to obtain your current beta release.'
now i wasn't aware that this was a beta, but now im looking for another ROM to replace it, but since that message is up my phone is locked and is in airplane mode and i cant get out of it so my phone wont sync with my computer to flash a new ROM on it. any help on how to do this is greatly appreciated. thank you.
Start the Bootloader then you can flash a new one with micro sd method or via usb.
Same problem here, I just made a post about it. The rom is JustHome I believe
Hi guys,
Today I become the owner of HTC HERO but unfortunatelly with firmware 1.5. Since this is my first android phone I need from somebody little instruction how to upgrade to VillainROM 12 or some others. I didn't have any experience with such upgrades but I had huge experince with upgrading satellite receivers, lcds, so I believe it won't be so complex for me.
Please write me some short instruction or leave MSN via private message to contact you.
Thanks in advance,
...MpegTv...
Use BTDAGs guide linked in my signature. Read the whole thing through 1st, including the FAQ,... then go for it!
Hey all
Yesterday i got the most awaited Adam.
first thing i did was to update it as mentioned in site notioninkfan site
but even after that i m facing problems like force close HomeScreen err.
also i dont have 3g sim card or wifi router at present.
so only option left for me is to use ad-hoc for which i wil have to root my adam.
I am n00b in rooting. i have read many posts present in this forum and in NIhacks but cant judge which one to use.
can anybody help me by posting a link to Stable rooting of Adam with Ad-hoc (and if possible using market).
Also, is there any way to Un-brick it again kindly let me know.
Sorry developers, i m not a tech guy so i cant experiment at present on adam.
please excuse me, this time.
Thanks
Regards,
Atul Tiwari
Tutorial Guide to root here :
http://notioninkhacks.com/index.php...k-adam-update-root-market-adhoc-how-to-guide/
You also have info about how to unbrick it in the website above or the forums.
atultiwari said:
Hey all
Yesterday i got the most awaited Adam.
first thing i did was to update it as mentioned in site notioninkfan site
but even after that i m facing problems like force close HomeScreen err.
also i dont have 3g sim card or wifi router at present.
so only option left for me is to use ad-hoc for which i wil have to root my adam.
I am n00b in rooting. i have read many posts present in this forum and in NIhacks but cant judge which one to use.
can anybody help me by posting a link to Stable rooting of Adam with Ad-hoc (and if possible using market).
Also, is there any way to Un-brick it again kindly let me know.
Sorry developers, i m not a tech guy so i cant experiment at present on adam.
please excuse me, this time.
Thanks
Regards,
Atul Tiwari
Click to expand...
Click to collapse
First need to install the latest update from Notion Ink Adam. Which requires you go into quick flash mode. Or you can just hit Update in your setting menu. Or your adam could be already updated, but i would just flash it with the latest update.
go this xda-developer page:
http://forum.xda-developers.com/showthread.php?t=942472
apply your specific update. You will need a MicroUSB To USB connector for your computer. Follow the instructions from NI carefully. Remember to hit Power Button + VOLUME DOWN to go into flash mode to enter ADB mode for your pc.
Once you get that done, head over to Notioninkhacks.com
then apply the hack: http://notioninkhacks.com/index.php/2011/02/05/updated-notion-ink-adam-update-root-market-adhoc-how-to-guide/
Unzip the folder and and transfer item to your root folder in your sdcard or sdcard2 and flash your Adam by hitting Power Button + VOLUME UP
Good Luck!
Thank you all. (both of the reply and pm by Amon Darthir ) .
I have just rooted it. N finally i m able to run net by ad-hoc.
also the hanging prb is solved a bit.
one more question, is merely by using the latest update given by NI, can i save my warrenty? or by any means?
Thanks.
Regds,
Atul tiwari
Messaging from my Rooted Adam.
just flash it with NI update and you should be set
i decided to post my problem here since i havent reached 10 posts to post in the rom thread sorry for that but i need solution for my problem and i cant either send a pm to the developer so my problem :
i cant pair any bluetooth headset to my hd2 since i installed TBD native sd rom and i get a massage when i try to pair my headset that says wrong pin code note that the device doesnt bring pairing dialog where i type the pair code for my headset which is 0000 and if it doesnt bring a massage the phone just keep saying pairing endless time
and i dont have a problem sending files to other devices by bluetooth
thanks in advance
I neither use bluetooth nor that rom. So I cannot be much of a help. But you can try and search the rom's thread using potential keywords. It may help you.
Hey I wasnt able to find a solution to my problem and I tried sundawg instructions in his pm to me and it didn't work either as for the part to change the kernel I tried but the ROM won't boot after changing kernel or I'm doing something wrong please sundawg look into it yourself your ROM is true legend for me its perfect except for this bug
Thanks again
Sent from my HTC HD2 using xda premium
Hi everyone, I just purchased a head unit for my 2008 Mitsubishi Outlander and when I hooked it up on the bench last night I discovered that the MCU Version is MTCC-KLD6-V2.91
I'm new to Android Auto, just started reading about MTCB and MTCD MCUs but couldn't find a single link or article about the MTCC. What did I get myself into here?
Btw. Unit looks and works great (bench test only) all apps except for Sygic work awesome (bench test only)
Hello rafy, hello neo,
I got the same unit with the same firmware etc.
I wanted to install TomTomGo, but unfortunately it doesn't work. Other User posted their solution here: http://forum.xda-developers.com/android-auto/mtcb-software-development/solution-tomtom-connection-to-internet-t3368026
So that's why I wanted to install Xposed Phone Id Changer. For that I need my device rooted. Could you already rooted your device?
Where can I find the guidance to root a device, or is this depend from the Type?
Thanks for your feedback
Hello all,
are you able to help me. Finally I could rooted my device. But I'm not able to install the XPosed Framework. Do you have any advice for me? In recovery menu there is no option to install anything,- only updating / install a MCU. In different MTCD threads they mentioned, that a backup (for example Nandroid) doesn't help because we will not be able to recover the backup.
How could you install XPosed Framework on Lollipop?
Hello all,
I got the confirmation from seller that this is NOT a new unit. Only the MCU version jumped from MTCB to MTCC.
So that's why I installed Android 4.4.4 from Malaysk Rom. And all is working very well ... including TOMTOM.
But please notice I do not give any warranty. If you flash your device, you will do that on your own risk.
I can only confirm that I could successfully install Malaysk Rom on my unit: http://forum.xda-developers.com/show...9#post67280169
Have a nice weekend.
---------- Post added at 10:01 PM ---------- Previous post was at 09:50 PM ----------
neoatomic said:
@Enemy004 I was also looking at that solution. But not tried yet.
I did spent a lot of time to get it working, but finally gave up and sent TomTom an email.
They told me a bs story that the chip-set is not compatible, (rt3188) just find that a little hard to beleave.
Also i contacted the seller and the factory reset password is "126". Its looking to be the same as this unit. :
http://forum.xda-developers.com/wiki/Hui_Fei_Type#Factory_Settings_.22Passwords.22
Click to expand...
Click to collapse
You're right all listed passwords working fine for my device. So this is another indicator that we have the same unit.
neoatomic said:
(There is also a code to root the unit in the above description.) How did you root the unit.?
Also how can you enter the recovery menu in the unit.? (i only have 4 buttons. power/home/navi. And a hidden reset button)
Hope @Malaysk is willing to take a quick look at the photos, and is able to tell us what unit/rom we have. And if we can use any of his custom Rom's.
Click to expand...
Click to collapse
You don't need to root your device if you want to use Malaysk's Rom. I rooted my device with hope to install the XPosed Framework on Lollipop (Android 5.1.1). But it seems that nobody could to that till now. But if you want to root your device because you will keep your rom:
Factory settings> *#hct#root#
Install King Root latest version from their website
took few minutes after being stock on 90% and succeeded
You can enter the recovery menu if you press the reset and the power button at the same time for somy seconds. Release first the reset button. After that your Unit will restart in Recovery Mode.
neoatomic said:
@Enemy004 Thank you for all the information.! :good:
Just to be 100% sure, your device had identical (1:1) information as shown in the first post pictures.?
And the flashing of the Malaysk's Rom went smooth.? No issues.? Or not working buttons etc.?
Just a little hesitant because the device is brand new.
Click to expand...
Click to collapse
Please check.
For me Malaysk rom is a well-conceived rom. A lot of settings are can be found more easily than in the original rom. Moreover I love the look from this rom. At the moment I try to use a nice Icon Pack.
But my main intention to buy this radio/unit was TomTom.
It's important to read the thread from Malaysk. There are a lot of instructions. If Malaysk found a solution regarding XPosedFramework on 5.1.1 Android. I will install this.
And yes, all buttons from the Unit will work. Moreover all buttons from your wheering steel will still work. For safety you may note down (or make screenshots) from all factory settings.
While flashing the rom, having patience is an important attribute.
Have a nice sunday. If you want another picture. Let me know.
@Enemy004, +1 to all the thanks. I ordered a unit a couple weeks ago that has an MTCC MCU. I very much appreciate your efforts to determine what MTCC is.
Enemy004 said:
Hello all,
I got the confirmation from seller that this is NOT a new unit. Only the MCU version jumped from MTCB to MTCC.
So that's why I installed Android 4.4.4 from Malaysk Rom. And all is working very well ... including TOMTOM.
But please notice I do not give any warranty. If you flash your device, you will do that on your own risk.
I can only confirm that I could successfully install Malaysk Rom on my unit: http://forum.xda-developers.com/show...9#post67280169
.
Click to expand...
Click to collapse
Could you please give me the link to the ROM you used for your device. Link in your previous post is dead.
I also have MTCC _KLD6 head unit. Thanks in advance
This is the thread: http://forum.xda-developers.com/showthread.php?t=3246370
The newest update is from 12the June: http://forum.xda-developers.com/showthread.php?p=67280169#post67280169
Did some one install Android auto on this 5.1.1 radio? Does it work?
I don't understand your question? Did you read all posts in this thread?
Short:
I installed Malaysk ROM (Android 4.4.4) on my 5.1.1 radio. And my radio work very well. Malaysk provides ROMs for 51.1, too. I decided for 4.4.4 because of XPosed Framework.
Xposed works on 5.1.1 Malaysk
xposed works on 5.1.1 look for update_5_1_1_FUSE_1024X600_RK3188_03_MAL_25_07_2016_MTCB.rar
---------- Post added at 11:30 PM ---------- Previous post was at 11:26 PM ----------
My only problem is I get no tomtom working...... I´m not able to change the fu..... serial number of my device.....
24stdpcnotdienst said:
xposed works on 5.1.1 look for update_5_1_1_FUSE_1024X600_RK3188_03_MAL_25_07_2016_MTCB.rar
---------- Post added at 11:30 PM ---------- Previous post was at 11:26 PM ----------
My only problem is I get no tomtom working...... I´m not able to change the fu..... serial number of my device.....
Click to expand...
Click to collapse
Check the "Lollipop for MTCB" thread, @dsa8310 has a solution.
Could a Mod move this to the MTCB forums and rename them "MTCB/MTCC" forums ?
If it is possible to flash Malaysk's android 5.1 ROM, then why not move it into the MTCD forums, because I would rather flash the new version than the old one...
Sent from my SM-N910F using XDA-Developers mobile app
nomailing said:
If it is possible to flash Malaysk's android 5.1 ROM, then why not move it into the MTCD forums, because I would rather flash the new version than the old one...
Sent from my SM-N910F using XDA-Developers mobile app
Click to expand...
Click to collapse
Because its NOT an MTCD unit, its an MTCC unit. Malaysk does ROMs for MTCB/MTCC and MTCD.
It is NOT possible to flash Malyask's MTCD ROM (I never said it was), it is only possible to flash Malaysk's MTCB/MTCC ROM.
Hi !
You seem to have almost the same unit for Mazda 6.
Which ROM have you used? Isn't is slower than the original which was already terribly sluggish for me?
Could you give me a link to the flashing tutorial ?
I have never done this before and wooldt like to brick my unit .
Thanks !
Kind regards . Tomasz
ttoton said:
Hi !
You seem to have almost the same unit for Mazda 6.
Which ROM have you used? Isn't is slower than the original which was already terribly sluggish for me?
Could you give me a link to the flashing tutorial ?
I have never done this before and wooldt like to brick my unit .
Thanks !
Kind regards . Tomasz
Click to expand...
Click to collapse
ALL these units are the same inside, for whatever car and including the universal ones. Flashing is the same for all versions as well.
Please read the thread I told you about yesterday for more info and ask questions there, this thread is useless because ALL units are the same for software purposes !!
To update, put update.img on sd card put sd card in slot (in the GPS slot if you have 2) and go to settings/update, it will update automatically. Alternatively hold down power and reset, release reset then power and you will boot into recovery, then install from there.
typos1 said:
ALL these units are the same inside, for whatever car and including the universal ones. Flashing is the same for all versions as well.
Please read the thread I told you about yesterday for more info and ask questions there, this thread is useless because ALL units are the same for software purposes !!
To update, put update.img on sd card put sd card in slot (in the GPS slot if you have 2) and go to settings/update, it will update automatically. Alternatively hold down power and reset, release reset then power and you will boot into recovery, then install from there.
Click to expand...
Click to collapse
Hi!
I remember this, but the links in the post you quoted were already expired yesterday.
It was of no use, except giving me information someone got the solution, without possibility to use it.
Thus I continued the search, not willing to make use of your time...
For now, I still have no solution for me. I found a user that successfully rooted himself the unit with Kingo Root.
I didn't work for me.
So, still looking for the solution. I also have written a priv to the author of the ROM you suggested.
Kind regards,
Tomasz
ttoton said:
Hi!
I remember this, but the links in the post you quoted were already expired yesterday.
It was of no use, except giving me information someone got the solution, without possibility to use it.
Thus I continued the search, not willing to make use of your time...
For now, I still have no solution for me. I found a user that successfully rooted himself the unit with Kingo Root.
I didn't work for me.
So, still looking for the solution. I also have written a priv to the author of the ROM you suggested.
Kind regards,
Tomasz
Click to expand...
Click to collapse
Its just a simple case of looking in the forums to find the thread - ALL your "problems" were solved months ago, they are not problems anymore, just read the thread entitled "Lollipop for MTCB/C Head units" :
http://forum.xda-developers.com/and...lollipop-mtcb-units-tested-courtessy-t3389906
typos1 said:
Its just a simple case of looking in the forums to find the thread - ALL your "problems" were solved months ago, they are not problems anymore, just read the thread entitled "Lollipop for MTCB/C Head units" :
http://forum.xda-developers.com/and...lollipop-mtcb-units-tested-courtessy-t3389906
Click to expand...
Click to collapse
With all due respect, but you've sent me the same link as in your first message to me and as I've writted - it is not working. It says:
Nothing found
The owner may have deleted the file or restricted access to it.
Or you might have received a link with a typo.
It's easy to send Yandex.Disk links to your friends. Even large photos and videos can be sent in one link.
Don't judge me 'from the above', as I have spent more time seeking the XDA (time I don't have when working 2 jobs) that you obviously think, and found no clear and obvious solution.
Please note that XDA is not indexed by google, what you can fin when googling is useless HuiFei Wiki (USELESS!!!!).
On XDA you may only find single threads, which is still useless, as there is no simple way to swich to some usefull information.
FAQ?
Those are only marked threads.
Seeking my problem among this is a disaster.
I would expect a direct link on XDA: "ROOTING the device" -> choice of devices using "MTTC-KDA6", etc. codes, and then full tutorial how to make this work.
For now, there are only opinions of people that report to succeed, but without a solution for me.
So please...
Any real solutions available?
Kind regards,
Tomasz
ttoton said:
With all due respect, but you've sent me the same link as in your first message to me and as I've writted - it is not working. It says:
Nothing found
The owner may have deleted the file or restricted access to it.
Or you might have received a link with a typo.
It's easy to send Yandex.Disk links to your friends. Even large photos and videos can be sent in one link.
Don't judge me 'from the above', as I have spent more time seeking the XDA (time I don't have when working 2 jobs) that you obviously think, and found no clear and obvious solution.
Please note that XDA is not indexed by google, what you can fin when googling is useless HuiFei Wiki (USELESS!!!!).
On XDA you may only find single threads, which is still useless, as there is no simple way to swich to some usefull information.
FAQ?
Those are only marked threads.
Seeking my problem among this is a disaster.
I would expect a direct link on XDA: "ROOTING the device" -> choice of devices using "MTTC-KDA6", etc. codes, and then full tutorial how to make this work.
For now, there are only opinions of people that report to succeed, but without a solution for me.
So please...
Any real solutions available?
Kind regards,
Tomasz
Click to expand...
Click to collapse
Well something is wrong then because I checked the link after I posted it and I ve just clicked on it now and it goes straight to the correct place . . .
Nevertheless you can easily google it, thats how I found the link anyway as I did not have the thread open at the time, google is the quickest way to find stuff on xda. Another method id to look in the "Android Auto" section of xda, theres a general section and FOUR MTCB/C sections, a Q&A, a general section, a software section and a hardware section, I m surprised you have not been able to find them.
The wiki is not "useless" it has lots of useful stuff in it, just because it doesnt happen to cover your problem does not make it useless.
The rooting method is in the wiki, if it does not work then the thread I keep mentioning has all the solutions and help you could wish for and many many people with the knowledge and experience to help you, all you need to do is read it and post in it.
The MCU is irrelevant to rooting so you will not find any links that will help you mentioning the MCU.