:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
As you all know safetynet is implemented by Google itself to check Security of your Device & also by Some games or apps Eg. Pokeman Go,Android pay,Snapchat etc. So If Your Phone Is Rooted SafetyNet Test Will Fail.
With failed Safetynet Test You Can't Run These Apps in Your Mobile.
Check your Safetynet Status By This App:- https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
So If your Test Failed And you can't able to run Games or Some Apps Try This method
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
yo_honey said:
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
.....
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Click to expand...
Click to collapse
Thanks my friend, u save my day, Samsung S6 Edge +.
Flash Latest SuperSu Zip in custom recovery
MrFlashGame said:
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
Click to expand...
Click to collapse
Download Latest Stable version of SuperSu zip And Flash it Using Custom Recovery. This may solve your problem.
Hello, anyone have boot img for htc 820 dual sim?
Thank you
Note: THIS WILL NOT WORK WITH SYSTEMLESS XPOSED, YOU MUST USE THE CLASSIC VERSION!
Configuration tested on:
Redmi Note 3 Kenzo 3gb goodix variant.
Officially unlocked bootloader.
Installed latest global dev rom (7.7.20) with miflash in edl mode then installed TWRP official 3.1.1-0 then installed 7.7.6 firmware from LineageOS 14.1 thread.
Latest LineageOS build (2/8/17) with Radon Kernel 5.3.
Steps:
1. Install latest global dev rom to make sure you have the proper nougat binary blobs on your device. Preferable to use miflash and phone in edl mode. Allow phone to boot one time so rom can partition the emmc properly.
2. Install latest TWRP official (3.1.1-0) by putting phone in bootloader mode and connecting to PC via usb cable. Copy the twrp recovery image to the same place that fastboot.exe is located. Open an elevated/admin command prompt and navigate to where fastboot.exe is located. Type "fastboot flash recovery NameOfRecovery.img" (without quotes of course). When that is finished type "fastboot boot NameOfRecovery.img."
3. Install zips in this order. LineageOS rom, OpenGapps, Radon Kernel 5.3 (selected all default settings), Magisk 13.3.
4. Reboot to system, set up phone and install any apps that need to pass cts safety net at this point. E.G. Super Mario Run.
5. Reboot to recovery.
6. Install the latest Xposed build for SDK25 ARM64 from PurifyOS Xposed thread - https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221. DO NOT USE THE SYSTEMLESS MAGISK VERSION.
7. Reboot to system.
8. Install latest Xposed Material installer by DVDAndroid - https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758. At this point you will fail safety net. The next step will fix that.
9. Install Root Switch 1.3.3.2 apk.
10. When you need to pass CTS Safety Net use Root Switch to disable Xposed. It will ask you confirmation to perform a soft reboot. After the soft reboot Xposed will be disabled and you will be able to pass CTS Safety net again. DO NOT USE THE DISABLE ROOT SWITCH! THIS WILL PERMANENTLY MESS UP MAGISK!
THIS HAS ONLY BEEN TESTED ON THE LISTED CONFIGURATION. DO NOT ASK IF IT WORKS ON ANY OTHER CONFIGURATION, TEST IT YOURSELF. I WILL NOT BE RESPONDING TO QUERIES, IF YOU FOLLOW THE STEPS AS LISTED YOU WILL BE JUST FINE.
Linn for root switch
tried this on rr rom redmi note 3 kenzo working absolutely fine highly recommend
Works on One Plus 3T with Oxygen OS 4.1.6!
Thanks!
If the root switch app disables xposed, then what is the use of it
Hello Team,
I flashed Magisk v13.3 zip on my Samsung Galaxy S5 (SM-G900H). Installation went well and got Magisk v13.3 installed successfully but just after bootup when I check it says Magisk is not installed under Magisk Manager. Refer attached screenshots and help to resolve this issue.
After a reboot it again back to normal but after sometime same error that Magisk is not installed.
I tried almost all recent version of Magisk.
Custome ROM: GENIUSv1-PRO[G900H]S8 EDITION Developed by: HpGenius
hey there, i recently unlocked bootloader and flashed TWRP via AIO tool, and flashed new magisk 14.5 via TWRP but whenever iam insatlling any module[ https://www.xda-developers.com/enable-night-light-camera2-api-xiaomi-mi-a1-magisk/ ] it is saying your magisk is not activated.
I can't able to flash xposed zip file via TWRP for oreo 8.1 so i used this magisk method and its working on 8.1 aosp rom.
Recognized Contributor @topjohnwu has modified the*Xposed*Framework (V.85.1) to work alongside Chainfire's*systemless*SuperSU in order to also run without modifying the*system*partition. This means that you can install*Xposed*modules on a rooted device running the stock ROM and continue to receive OTAs
And can pass safety net check so u can use any root app which interfere in system.
Video guide:
https://youtu.be/4mW16FJjCPU
Requirements :
1)MAGISK ROOT
2)SOME FLASHING KNOWLEDGE (for installing magisk only)
DOWNLOAD AND FLASH MAGISK v16 IN TWRP AND INSTALL MAGISK MANAGER APP 5.6.2
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445#login
AND FOLLOW ALL STEPS IN VIDEO
KEEP NANDROID BACKUP IF ANY CASE DEVICE DOESN'T BOOT
Working XPOSED modules list for OREO
https://forum.xda-developers.com/xposed/xposed-modules-oreo-t3732819