Database Users

OP2 stuck in bootloop on upgrading 3.0.2 .. even after trying tons of things

First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out

Sahaj4 said:
First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out
Click to expand...
Click to collapse
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk

Jyoti_re said:
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk
Click to expand...
Click to collapse
Heyy.. Thanks a lot Jyoti_re! It worked out perfectly..
I have done till step 3.. The phone booted into 3.0.2
The sensors are not working. I will flash the presist.img as you said in step 4
However, i have encountered a problem. My OP2 is a 64 GB version. But now the internal storage shows 7gb free out of 9.66 GB.. Earlier it used to show 54GB instead of 9.66..
What should i do?
Thanks again

Yes u must have to flash persist.img via firstboot mode by typing [ fastboot flash persist ] for sensor correctly working.
Install es file explorar from play store and check which folder taking More space
don't forget to press thanks if I helped u.

Thanks a lot Jyoti! /
Yeah i got it.. Flashed the persist img.
i searched through the forums.. somehow my device got the 16gb version img.. i dont know how..
i had to flash userdata64G.img as well
Now it all works perfectly.. sensors are working.. data storage is back at 54gb..
Thanks a lot! I had been stuck on this bootloop since 3 days..
and i pressed the thanks button.. i will press it 100 times over if possible Thanks again! Cheers!

Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!

Sahaj4 said:
Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!
Click to expand...
Click to collapse
Flash this SuperSU
https://drive.google.com/file/d/0B0OiN2evbEPuZk1KSk1hYUpEazA/view?usp=drivesdk
don't forget to press thanks if I helped u.

OP2 stuck in bootloop on upgrading from 2.0.2 to 3.0.2
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...

ciroportugues said:
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...
Click to expand...
Click to collapse
Have u enabled OEM unlocking in developer option ??

No i forgot to enable...

No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
Jyoti_re said:
Have u enabled OEM unlocking in developer option ??
Click to expand...
Click to collapse
No iforgot to enable...
What can i do now?

ciroportugues said:
No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
No iforgot to enable...
What can i do now?
Click to expand...
Click to collapse
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/

Jyoti_re said:
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Click to expand...
Click to collapse
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.

ciroportugues said:
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.
Click to expand...
Click to collapse
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.

ciroportugues said:
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.
Click to expand...
Click to collapse
What does the Device Manager show when you connect your phone? By what name is it identified?

Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).
---------- Post added at 10:06 PM ---------- Previous post was at 09:37 PM ----------
Sahaj4 said:
What does the Device Manager show when you connect your phone? By what name is it identified?
Click to expand...
Click to collapse
Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).

When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings

Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Sahaj4 said:
When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings
Click to expand...
Click to collapse
Tried this commands but the sistem reboots and stucka on powered by android

ciroportugues said:
Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Tried this commands but the sistem reboots and stucks on powered by android
Click to expand...
Click to collapse
Hi. want to know if you anymore command to help me? thanks for help

ciroportugues said:
Hi. want to know if you anymore command to help me? thanks for help
Click to expand...
Click to collapse
I don't know much.. only as much as i have tried..
try running the command
fastboot oem device-info
if your device is unlocked, you are lucky! then there are many options
but if your device is locked.. then as far as i know, msm tool is your only saviour
try using this guide to unbrick your phone
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/

Really Stuck and Need Help ASAP!!! MLA-L03 Soft Brick

I'm stuck in an infinite eRecovery loop. No matter what I try or what I do I can't get the phone to boot back into the OS. Anyone have any tips or tricks? Huawei is going to do an rma for me but I'm flying out on business for 2 weeks and really need this phone with me. It's an MLA-L03 that is oem unlocked (which is what I'm thinking is causing me the most issues as I can't do the normal button presses to get to certain things but I can't relock it as it says it can't be trusted or whatever)
I did manage to get to a point where I have full access to /data/ but no matter what rom I try to flash it fails with failing to mount /cust/
If I put an update.app it will get to 5% and hang until it fails when I do the button press to force an update. I cannot get to the emui factory reset screen.
PS, yes I know I'm a dumbass, so be gentle lol. I'm really desperate and have nothing to lose at this point so will to try anything.
I did try everything here with no luck (other than getting full access to /data/ lol):
https://forum.xda-developers.com/nova-plus/help/help-nova-plus-mla-l03-bricked-t3573234

Im not a pro either but,have you try to recover phone via HiSuite ?
in hisuite,main screen,bottom right tab...

I did try that but it says my phone is not compatible (or something to that effect).

rednekcowboy said:
I did try that but it says my phone is not compatible (or something to that effect).
Click to expand...
Click to collapse
sadly,i cant help more...i did not installed that erecovery thing/unlocked or rooted my device so.....
hope someone will join to help you

the erecovery thing is a huwaei emui feature, not something I installed but thanks anyways for the suggestion.

rednekcowboy said:
the erecovery thing is a huwaei emui feature, not something I installed but thanks anyways for the suggestion.
Click to expand...
Click to collapse
my bad hehehe...i wanted to say the twrp :silly:

Ok so you'll have to flash firmware with fastboot.
You need to download and install fastboot, firmware finder and huawei extract tool.
https://forum.xda-developers.com/showthread.php?t=2588979 (fastboot), https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 (firmware finder), https://forum.xda-developers.com/showthread.php?t=2433454 (huawei extract tool).
So install adb and fastboot, extract firmware finder and huawei extract tool. Open firmware finder hit common base, on model for find enter mla-l03 and download a full ota, form firmware you just downloaded extract update.app. Now open huawei extract tool and load your update.app you've just extracted and extract from there boot.img, recovery.img and system.img by using the right click (extract them on the same folder where is located fastboot, for example I got fastboot installed on local C/adb).
If you have twrp installed boot in fastboot mode by using twrp, if not you can boot in fastboot mode with the phone turned off by pressing volume - while plugging the usb cable.
Open cmd and write cd /adb (between cd and / is space) and hit enter than write fastboot flash boot BOOT.IMG and hit enter, fastboot flash recovery RECOVERY.IMG and hit enter, fastboot flash system SYSTEM.IMG and hit enter, after finally writing the system write fastboot reboot and hit enter and wait till phone reboots.

Thanks, I've done all that already and it did not fix it but will try again once I get home.
mArIuS% said:
Ok so you'll have to flash firmware with fastboot.
You need to download and install fastboot, firmware finder and huawei extract tool.
https://forum.xda-developers.com/showthread.php?t=2588979 (fastboot), https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 (firmware finder), https://forum.xda-developers.com/showthread.php?t=2433454 (huawei extract tool).
So install adb and fastboot, extract firmware finder and huawei extract tool. Open firmware finder hit common base, on model for find enter mla-l03 and download a full ota, form firmware you just downloaded extract update.app. Now open huawei extract tool and load your update.app you've just extracted and extract from there boot.img, recovery.img and system.img by using the right click (extract them on the same folder where is located fastboot, for example I got fastboot installed on local C/adb).
If you have twrp installed boot in fastboot mode by using twrp, if not you can boot in fastboot mode with the phone turned off by pressing volume - while plugging the usb cable.
Open cmd and write cd /adb (between cd and / is space) and hit enter than write fastboot flash boot BOOT.IMG and hit enter, fastboot flash recovery RECOVERY.IMG and hit enter, fastboot flash system SYSTEM.IMG and hit enter, after finally writing the system write fastboot reboot and hit enter and wait till phone reboots.
Click to expand...
Click to collapse

Really?
I got my phone in the same state and was the only method witch helped me.
Did you successfully flashed boot, recovery and system and still not working? phone get stuck on the huawei logo? After you flash them, boot into recovery and do a factory reset and wipe cache.

yup, everything flashed successfully. I can't get into the recovery to do a factory reset. I have 4 options at my disposal:
1. fastboot
2. Huawei eRecovery
3. TWRP
4. force update where it always fails at 5%
I think the biggest thing that is screwing me is the fact that it's unlocked and I can't relock it. I'm almost 100% positive if I could relock it, I would have no issues with it.

And woh do you boot into twrp? Since you can boot into twrp you must be able to boot in stock recovery. Use huawei multi tool by black team too go into recovery.
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
rednekcowboy said:
yup, everything flashed successfully. I can't get into the recovery to do a factory reset. I have 4 options at my disposal:
1. fastboot
2. Huawei eRecovery
3. TWRP
4. force update where it always fails at 5%
I think the biggest thing that is screwing me is the fact that it's unlocked and I can't relock it. I'm almost 100% positive if I could relock it, I would have no issues with it.
Click to expand...
Click to collapse
I got the bootloader unlocked too, and it's working via fastboot....
Huawei multi tool have the option to relock the bootloader.

mArIuS% said:
And woh do you boot into twrp? Since you can boot into twrp you must be able to boot in stock recovery. Use huawei multi tool by black team too go into recovery.
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
I got the bootloader unlocked too, and it's working via fastboot....
Huawei multi tool have the option to relock the bootloader.
Click to expand...
Click to collapse
Thanks I'll try that.
It's weird. I flash TWRP, do what I need to do, then reflash the recovery.img. However it just does a continuous loop to eRecovery when I do that unless I try to force it to update.
I'll try using the fastboot that you linked to and see if that makes a difference. Right now I'm using the minimal adb and fastboot install.
EDIT: Same result when trying to relock the bootloader--device cannot be trusted.
EDIT2: Do you have the cust.img file? None of the firmwares I've downloaded has it in it.

rednekcowboy said:
Thanks I'll try that.
It's weird. I flash TWRP, do what I need to do, then reflash the recovery.img. However it just does a continuous loop to eRecovery when I do that unless I try to force it to update.
I'll try using the fastboot that you linked to and see if that makes a difference. Right now I'm using the minimal adb and fastboot install.
EDIT: Same result when trying to relock the bootloader--device cannot be trusted.
EDIT2: Do you have the cust.img file? None of the firmwares I've downloaded has it in it.
Click to expand...
Click to collapse
I have a cust.img but is for can-l01...and won't help you.
Sorry i'm out ideas.

mArIuS% said:
I have a cust.img but is for can-l01...and won't help you.
Sorry i'm out ideas.
Click to expand...
Click to collapse
When your device reboots and you get to the warning screen about your device being unlocked, what buttons do you press to get into the normal (ie not eRecovery) recovery where you can do a factory reset? When I have TWRP installed, I have to hold volume + and volume - at the same time to go into TWRP. If I do the same thing after I reflash recovery.img, then it goes straight into the forced update which stalls and fails at 5%. Volume - reboots and goes back to fastboot. Volume + takes me to eRecovery. Doing nothing, the phone reboots and goes to eRocovery on the reboot. Holding down all 3 buttons also goes to the forced update screen.
I'm assuming that I'm missing something super simple and stupid so I'm going to go over everything again, step by step very carefully.

rednekcowboy said:
When your device reboots and you get to the warning screen about your device being unlocked, what buttons do you press to get into the normal (ie not eRecovery) recovery where you can do a factory reset? When I have TWRP installed, I have to hold volume + and volume - at the same time to go into TWRP. If I do the same thing after I reflash recovery.img, then it goes straight into the forced update which stalls and fails at 5%. Volume - reboots and goes back to fastboot. Volume + takes me to eRecovery. Doing nothing, the phone reboots and goes to eRocovery on the reboot.
I'm assuming that I'm missing something super simple and stupid so I'm going to go over everything again, step by step very carefully.
Click to expand...
Click to collapse
To enter in normal recovery you have to press and hold at the same time volume - and power button.

mArIuS% said:
To enter in normal recovery you have to press and hold at the same time volume - and power button.
Click to expand...
Click to collapse
That just reboots me and then puts me in fastboot unfortunately. I'm going to try loading twrp and removing anything in /dload/ and see if it will boot to normal recovery. Last time I checked there was an update.app file there so maybe it's just bypassing recovery and trying to install that.

rednekcowboy said:
That just reboots me and then puts me in fastboot unfortunately. I'm going to try loading twrp and removing anything in /dload/ and see if it will boot to normal recovery. Last time I checked there was an update.app file there so maybe it's just bypassing recovery and trying to install that.
Click to expand...
Click to collapse
Sorry it is volume up + and power button

And that brings me to eRecovery

mArIuS% said:
Sorry it is volume up + and power button
Click to expand...
Click to collapse
I'm driving and it's a bit hard to write did you tried another recovery? You can flsh twrp, put the stock recovery on sdcard, boot into twrp and flash recovery from there and reboot phone from twrp into recovery....

No worries, I really appreciate all the help. Now stop texting and driving. Your life is more important than my phone!!

Scc-u21 fastboot mode stuck

Hello Guys , I had tried to flash custom ROM for my scc-u21 so I had.
Rooted my device using kingroot
downloaded the ROM and TWRP img
installed Rashr to flash TWRP
tried to Flash TWRP using rashr but it's opened fastboot mod and says Please connect your phone to Hisuit
Phone: Unlocked
SRP: Unlock
so when I try to flash TWRP.img it open fastboot mode only
Tried Method Voulme up + Power it open Fastboot
Tried Download mode Volm up & down + power But already same fastboot mode
But My Device Opening Software Normally
maybe I won't to Format it because of Fastboot mode
what I have to do?!
that's because I didn't Unlocked my bootloader?!
And tell me what I have to Do please I wanna get back stock recovery , or TWRP recovery to flash custom ROM
Please Help
thanks.

Desill said:
Hello Guys , I had tried to flash custom ROM for my scc-u21 so I had.
Rooted my device using kingroot
downloaded the ROM and TWRP img
installed Rashr to flash TWRP
tried to Flash TWRP using rashr but it's opened fastboot mod and says Please connect your phone to Hisuit
Phone: Unlocked
SRP: Unlock
so when I try to flash TWRP.img it open fastboot mode only
Tried Method Voulme up + Power it open Fastboot
Tried Download mode Volm up & down + power But already same fastboot mode
But My Device Opening Software Normally
maybe I won't to Format it because of Fastboot mode
what I have to do?!
that's because I didn't Unlocked my bootloader?!
And tell me what I have to Do please I wanna get back stock recovery , or TWRP recovery to flash custom ROM
Please Help
thanks.
Click to expand...
Click to collapse
You need to get the bootloader code

Amaan007 said:
You need to get the bootloader code
Click to expand...
Click to collapse
Unlock your bootloader, then Flash the stock recovery through fastboot. You probably won't even loose your data

adam_s_459_ said:
Unlock your bootloader, then Flash the stock recovery through fastboot. You probably won't even loose your data
Click to expand...
Click to collapse
You will if u unlock ur bootloader

Amaan007 said:
You will if u unlock ur bootloader
Click to expand...
Click to collapse
I didn't when I unlocked mine. That's weird

adam_s_459_ said:
I didn't when I unlocked mine. That's weird
Click to expand...
Click to collapse
Its is may or may not

Huawei Y6 scc u21 Twrp Recovery Link Plz .

Any new update about new BlankFlash?

as you guys know June update killed a lot of athenes and same thing happened with my athene. and the BlankFlash is also not working after this update. so is there any update for blankFlash, post a link here.

no updated blankflash ... we should wait la
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
siddhesh9146 said:
as you guys know June update killed a lot of athenes and same thing happened with my athene. and the BlankFlash is also not working after this update. so is there any update for blankFlash, post a link here.
Click to expand...
Click to collapse
sad..... my athne toooooo dead .... we should hope get updated soon... most of moto g4 plus athene dead ...... i dont who gonna make new updated blankflash to recover....... thanks in advance who make new one..... or any other solution... already a post is here but it didnot work out at allll..... pls someone geeks solve this
...... ISSUES LOTS OF MOTO G4 PLUS DEADDD..... EVERYTHING TRIED NO LUCK[ATHENE]XT1643]:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

tamil2692 said:
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
sad..... my athne toooooo dead .... we should hope get updated soon... most of moto g4 plus athene dead ...... i dont who gonna make new updated blankflash to recover....... thanks in advance who make new one..... or any other solution... already a post is here but it didnot work out at allll..... pls someone geeks solve this
...... ISSUES LOTS OF MOTO G4 PLUS DEADDD..... EVERYTHING TRIED NO LUCK[ATHENE]XT1643]:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Nothin

new blankflash HERE : https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761

Does not enter recovery or boot up system
as soon as the blankflash file is updated i flashed it and worked
then i flashed updated gpt and bootloader
then i tried to enter recovery mode but its not entering
and also when i unplug usb cable it is turning off
then i flashed stock rom
but still recovery and system booting are not working,enters only to fastboot that too on charging.
guyss please help me it means a lot to me.Thanks in advance

Geek_manoj said:
as soon as the blankflash file is updated i flashed it and worked
then i flashed updated gpt and bootloader
then i tried to enter recovery mode but its not entering
and also when i unplug usb cable it is turning off
then i flashed stock rom
but still recovery and system booting are not working,enters only to fastboot that too on charging.
guyss please help me it means a lot to me.Thanks in advance
Click to expand...
Click to collapse
Are you mentioning that your device only boots to fastboot now? If you press 'start', does that boot to system or not?
Which stock ROM did you flash, and can you confirm if the flash worked? How did your device brick in the first place?

echo92 said:
Are you mentioning that your device only boots to fastboot now? If you press 'start', does that boot to system or not?
Which stock ROM did you flash, and can you confirm if the flash worked? How did your device brick in the first place?
Click to expand...
Click to collapse
he didn't flashed stock rom yet, he is only trying to flash custom roms zips from recovery. someone please him that this won't work in this case:cyclops:

Blank Flash Files Moto G4 Plus
Yes I have the correct blank flash files for Moto G4 Plus. I was used it on my device XT1643 and it is working.

echo92 said:
Are you mentioning that your device only boots to fastboot now? If you press 'start', does that boot to system or not?
Which stock ROM did you flash, and can you confirm if the flash worked? How did your device brick in the first place?
Click to expand...
Click to collapse
yes,the device boots only to fastboot that too only when charged.if i press start that doesn't boot to system.I flashed "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip".I bricked by doing softare update after reflashing stock rom.it also doesnt enter recovery
---------- Post added at 02:09 AM ---------- Previous post was at 02:05 AM ----------
siddhesh9146 said:
he didn't flashed stock rom yet, he is only trying to flash custom roms zips from recovery. someone please him that this won't work in this case:cyclops:
Click to expand...
Click to collapse
sorry if you dont understand.but i flash stock rom "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" in stock recovery.if u could help me please let me know.thanks in advance

Geek_manoj said:
yes,the device boots only to fastboot that too only when charged.if i press start that doesn't boot to system.I flashed "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip".I bricked by doing softare update after reflashing stock rom.it also doesnt enter recovery
---------- Post added at 02:09 AM ---------- Previous post was at 02:05 AM ----------
sorry if you dont understand.but i flash stock rom "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" in stock recovery.if u could help me please let me know.thanks in advance
Click to expand...
Click to collapse
I knew that, that file was for flashing in fastboot mode
but you flashed in recovery

Geek_manoj said:
yes,the device boots only to fastboot that too only when charged.if i press start that doesn't boot to system.I flashed "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip".I bricked by doing softare update after reflashing stock rom.it also doesnt enter recovery
---------- Post added at 02:09 AM ---------- Previous post was at 02:05 AM ----------
sorry if you dont understand.but i flash stock rom "ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" in stock recovery.if u could help me please let me know.thanks in advance
Click to expand...
Click to collapse
As siddhesh9146 had mentioned, the Athene stock ROM cannot be flashed in stock recovery, it is not a flashable zip file. You need a computer and ADB set up, extract the zip on your computer and use the flashing commands in the fastboot ROM thread to flash a stock ROM.
Until you've flashed the stock ROM, I'm not even sure if you have stock recovery, or a stock system on your device. The supplied blank flash does not appear to have a functioning recovery included with it.

echo92 said:
As siddhesh9146 had mentioned, the Athene stock ROM cannot be flashed in stock recovery, it is not a flashable zip file. You need a computer and ADB set up, extract the zip on your computer and use the flashing commands in the fastboot ROM thread to flash a stock ROM.
Until you've flashed the stock ROM, I'm not even sure if you have stock recovery, or a stock system on your device. The supplied blank flash does not appear to have a functioning recovery included with it.
Click to expand...
Click to collapse
I m sorry.I must have described in a better way.I actually mean that i used computer extracted the firmware and then i ran oem_flash,which is the actual way i suppouse in fastboot mode(i ommited for fastboot as stock recovery in previous post,sorry).but i dont know why it still doesnt enter recovery or enter into system or work without plug.i even tried flashing updated gpt.bin and bootloader files again followed by the rom,but noting happened
---------- Post added at 04:24 PM ---------- Previous post was at 04:19 PM ----------
echo92 said:
As siddhesh9146 had mentioned, the Athene stock ROM cannot be flashed in stock recovery, it is not a flashable zip file. You need a computer and ADB set up, extract the zip on your computer and use the flashing commands in the fastboot ROM thread to flash a stock ROM.
Until you've flashed the stock ROM, I'm not even sure if you have stock recovery, or a stock system on your device. The supplied blank flash does not appear to have a functioning recovery included with it.
Click to expand...
Click to collapse
siddhesh9146 said:
I knew that, that file was for flashing in fastboot mode
but you flashed in recovery
Click to expand...
Click to collapse
hey,i ommited in the post telling that i did it in recovery(sorry for that)actually it doesnt enter recovery,which i already mentioned.thanks for being concerned

Geek_manoj said:
I m sorry.I must have described in a better way.I actually mean that i used computer extracted the firmware and then i ran oem_flash,which is the actual way i suppouse in fastboot mode(i ommited for fastboot as stock recovery in previous post,sorry).but i dont know why it still doesnt enter recovery or enter into system or work without plug.i even tried flashing updated gpt.bin and bootloader files again followed by the rom,but noting happened
---------- Post added at 04:24 PM ---------- Previous post was at 04:19 PM ----------
hey,i ommited in the post telling that i did it in recovery(sorry for that)actually it doesnt enter recovery,which i already mentioned.thanks for being concerned
Click to expand...
Click to collapse
So, you booted your device to the bootloader screen (not to recovery), connected your device to your computer, and you've flashed using the OEM_flash script, and yet you're unable to reboot to recovery?
Sounds like your stock ROM flash did not work the first time, leaving you without a recovery or a system. Try the following just to confirm:
1) Ensure your adb folder contains the extracted NPJS25.93-14-8 stock ROM (all the files), should be about 2 GB for the stock ROM. Also confirm that the OEM flash script is in the same location (so your adb folder should have the stock ROM, the flash script and the adb and fastboot.exe and adb.dlls)
2)Reboot your device to the bootloader (power down, then press the power and volume down keys to boot to bootloader) and connect your device to your computer.
3)In the adb terminal, type 'fastboot devices', without the quotes. If communicating, you should see your device respond with its serial number.
4)If communicating, run the OEM flash script again.
5)If your device does not boot properly, then reboot to bootloader.
5a)Copy each of the commands from the script (you can open the script in a text editor) and paste them in the adb terminal window and run each one by pressing Enter on your keyboard. You should see the command report [OKAY] if it's flashed. Any errors, let us know, that might point more accurately to what might be going on.
As an aside, this is one of the reasons why downgrading isn't a good idea....

echo92 said:
So, you booted your device to the bootloader screen (not to recovery), connected your device to your computer, and you've flashed using the OEM_flash script, and yet you're unable to reboot to recovery?
Sounds like your stock ROM flash did not work the first time, leaving you without a recovery or a system. Try the following just to confirm:
1) Ensure your adb folder contains the extracted NPJS25.93-14-8 stock ROM (all the files), should be about 2 GB for the stock ROM. Also confirm that the OEM flash script is in the same location (so your adb folder should have the stock ROM, the flash script and the adb and fastboot.exe and adb.dlls)
2)Reboot your device to the bootloader (power down, then press the power and volume down keys to boot to bootloader) and connect your device to your computer.
3)In the adb terminal, type 'fastboot devices', without the quotes. If communicating, you should see your device respond with its serial number.
4)If communicating, run the OEM flash script again.
5)If your device does not boot properly, then reboot to bootloader.
5a)Copy each of the commands from the script (you can open the script in a text editor) and paste them in the adb terminal window and run each one by pressing Enter on your keyboard. You should see the command report [OKAY] if it's flashed. Any errors, let us know, that might point more accurately to what might be going on.
As an aside, this is one of the reasons why downgrading isn't a good idea....
Click to expand...
Click to collapse
Hey,thanks for bothering.But,it didnt work.i have got no error.But still mobile enters only fastboot that too when charging( only fastboot again).

I tried to clear cache memory by booting my g4 plus in recovery mode. the phone hanged up and switched off now unable to boot. tried the blank flash file to update but the same is not working. Can any one help !!

Z17S (NX595J) Unlock Bootloader & TWRP

Hi, I'm new to this phone. Just got it 1 week ago. I tried to find any related information on the bootloader unlock and custom recovery, but it is very limited. I think maybe this phone is not well known. I would appreciate if someone can provide me the way to unlock bootloader, flash TWRP and roots. I can't live without magisk and viper4android. Thanks.

Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !

thanks

dantonuci said:
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
Click to expand...
Click to collapse
Hi, I've tried numerous timed and it always won't pick up the command of unlocking bootloader. It always stay in the fastboot menu. I've toggled the 'OEM Unlock' function in the developer setting, as well as the USB debugging. Any idea why the device won't pick up that command?

Is it changing to unlock after you enter the command?
If so flash twrp then boot into recovery ...

dantonuci said:
Is it changing to unlock after you enter the command?
If so flash twrp then boot into recovery ...
Click to expand...
Click to collapse
Nope. It doesn't respond to the command in the fastboot. It just shows the fastboot menu. My adb is written 'waiting for device.... '.

Drivers , uninstall all other drivers and try please

dantonuci said:
Drivers , uninstall all other drivers and try please
Click to expand...
Click to collapse
Okay will try again

storytellerz said:
Okay will try again
Click to expand...
Click to collapse
I am also finding this message, what is its solution ???

the same recovery
dantonuci said:
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
Click to expand...
Click to collapse
Hi there, when I flashed the recovery that is always the stock recovery, why?

vins84 said:
Hi there, when I flashed the recovery that is always the stock recovery, why?
Click to expand...
Click to collapse
Not sure what you're asking, did you want to flash TWRP or stock? I was just giving tutorial for how to install TWRP

dantonuci said:
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
Click to expand...
Click to collapse
I'm having the problem. Unlock is not sticking to unlock. The unlock works and the flash works but as soon as you try and reboot into recovery it hangs at a blank screen no twrp. Console says waiting for device and stuck. next time I go into bootloader it says locked. The count is 3 for unlock count is there a limit? 7-6-18 Nubia Z17 NX591J WIn 10.

bmaz121 said:
I'm having the problem. Unlock is not sticking to unlock. The unlock works and the flash works but as soon as you try and reboot into recovery it hangs at a blank screen no twrp. Console says waiting for device and stuck. next time I go into bootloader it says locked. The count is 3 for unlock count is there a limit? 7-6-18 Nubia Z17 NX591J WIn 10.
Click to expand...
Click to collapse
Trouble shoot and experiment with the process it will work, even if it appears not locked after reboot

dantonuci said:
Trouble shoot and experiment with the process it will work, even if it appears not locked after reboot
Click to expand...
Click to collapse
I don't understand? Appears not locked? It is locked. Now I remember when I flashed my Star N997 the developer said that there is a unlock bit that has to be turned on in the process of unlocking. I think this may be the case here since it unlocks until a reboot. I am deep concerned that after a unlock count of 3 the phone will not boot anymore. Do you know anything about these things? Another thought is does the USB C need different drivers and should it be plugged into a USB 3.0 outlet?

TWRP will flash only when it's unlocked so even if it's saying it's locked go by what you can do with TWRP
---------- Post added at 12:25 AM ---------- Previous post was at 12:24 AM ----------
I did it several times and never had a problem

i was looking for camera.apk file from Nubia Z17S phone from Stock ROM, can anyone upload it here..it should be located in system / app or app-pvt folder, you can copy using Root Explorer tool.
pls. let me know...

I'm having problems unlocking the bootloader. Has anyone got the proper TWRP for this phone? I can't find it. The one I have says FAILED (remote: Requested download size is more than max allowed). Thanks

hello links no longer works. Someone could give me back the TWRP and minimalb fastboot adb

For anyone's information, TWRP will not boot in recovery while the phone is being charged. Unplug first. You will just get a black screen.

i am also experiencing the same issue.. where can i find the drivers for this phone nx595j? or how do i uninstall the drivers for it?
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
yo can somebody help me install a custom rom on my z17s via team viewer?? im willing to pay for your time