Related
I want multifile flashable Odin rom 4.4.2 with XEO or muliticsc with XEO for i9505.
I found 4.4.2 (4 files) rom: I9505XXUFNAD_I9505OXXFNA2_I9505XXUFNAD_OXX
and found PIT file.
Problem is that after root and csc select app I don't see XEO region in app. I need csc with XEO...
luxpiotr said:
I want multifile flashable Odin rom 4.4.2 with XEO or muliticsc with XEO for i9505.
I found 4.4.2 (4 files) rom: I9505XXUFNAD_I9505OXXFNA2_I9505XXUFNAD_OXX
and found PIT file.
Problem is that after root and csc select app I don't see XEO region in app. I need csc with XEO...
Click to expand...
Click to collapse
Not sure what you exactly want but if you are looking for stock roms , Poland XEO here you go:
http://www.sammobile.com/firmwares/database/GT-I9505/XEO/
I mean stock Samsung Rom divided to separate files ex:
AP_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar
BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar
CP_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar
CSC_OXX_I9505OXXFNA2_549230_REV06_user_low_ship_MULTI_CERT.tar
This last one CSC dont have XEO...
Im looking for a bit of guidance here..
Im in UK with a UK Edge+, I decided to Flash Poland 601 over BTU 511, worked great.. No issues. Then I decided to flash the Finland NEE rom.. thinking maybe a better Modem / Phone. After flashing through ODIN.. It failed.. Showing an exclamation mark in a white triangle.. saying.. an error had occurred and Ide need to use smart switch to fix..
Fortunately, I booted back into Download Mode and Re-Flashed Poland rom.. and phone is up and running..
So, why did that happen..
IS the NEE finland rom a different region or does it require a different PIT file..
I just want to know for future reference.. and keen to learn a bit more
Thanks
Hello. I was in a similar situation...I went from SIM(Slovenia Simobil) to XEO(which ultimately showed as TPH) and then wanted to go to SIO(Slovenia Open). Everything was OK, but the CSC stayed TPH. I did a little digging because nothing worked and found somewhere that if I flash 5.1.1 BTU version, that the CSC will change to BTU and I could go to a different CSC from there. It worked, but when I tried to flash SIM(or SIO) over BTU, it always failed at hidden.img. A couple of hours of busted nerves but I found two solutions.
1. Not so good: delete hidden.img from MD5 odin file and flash it later as a separate TAR file. The problem is that the next time you will try to flash something that's not Poland or BTU and some more from that group, you will have the same problem.
2. Recommended: go it this topic and find a PIT file which will repartition your device and then you will be able to flash the ROM for your region(NEE):
forum.xda-developers.com/s6-edge-plus/general/galaxy-edge-plus-g928-pit-file-branded-t3223375
From what I see there are two Polands(XEO). My guess is that you flashed OXX version over your BTU(OXA pit). Now you want to go back to NEE(OXA). My guess is you have to flash OXA pit before you flash NEE ROM again.
Quote from pasted topic:
SM-G928F OXA pit (BTU CPW DBT ITV KOR NEE XEF XEO XEU )
SM-G928F OXX pit
LUX OXX ( BGL CYO ETL MET ORX ROM SEB SEE SIO TPH XEF XEH XEO )
I hope this helps.
From what I see there are two Polands(XEO). My guess is that you flashed OXX version over your BTU(OXA pit). Now you want to go back to NEE(OXA). My guess is you have to flash OXA pit before you flash NEE ROM again.
-----------------------------------------------------------------------------------
Thanks for your help friend, and Yep thats exacttly right, I have flashed the OXX version., so when the UK BTU 601 hits, Ill have to flash the XEO pit first, then flash the BTU 601, ?
No problem, glad if I could help .
Yes, flash this -> SM-G928F OXA pit (BTU CPW DBT ITV KOR NEE XEF XEO XEU ). Then you should be able to successfully flash or NEE or BTU version.
What I did, is I flashed PIT(check repartition), let it restart(I think it restarted two times) then went back into download mode when it hung on the "Galaxy Edge Plus" screen and flashed the appropriate ROM for that flashed PIT(in my case SM-G928F VFG pit).
Up and running.. Thanks alot .. It worked for me the other way round.. I had to flash NEE first and got the error message again as I said in my OP, then flashed the zenlte BTU PIT and the phone booted straight away.. How strange. Regardless of what Ive read though, It only worked in ODIN 3.10.6...
Gotta point out though.... I followed what some threads reported.. flashing the PIT only in 10.7, then flash the ROM in 10.6 ... This doesnt work.. I had to use 10.6 to flash both, thats how I ended up flashing the PIT twice.. and after the rom..... Im glad it worked out anyway.. I feared a brick.. but luckily.. Im back on my own EU PIT , so BTU should flash no issues when it hits..
Learned a fair bit from this.. Thanks again
Great, I'm glad you made it.
Hey! My issue is to somehow change the CSC without root on my device. I live in Hungary. I bought my phone at carrier (T-Mobile) my original CSC is TMH. When Marshmallow released for Poland i did manage to put it on my device. Now... because XEO is a Multi-rom after a clean install my CSC went to TPH (Portugal) I searched for how to change csc without root (in this case XEO) but im failed to do it.
So guys, is there any option to do it?
laverdadb said:
Hey! My issue is to somehow change the CSC without root on my device. I live in Hungary. I bought my phone at carrier (T-Mobile) my original CSC is TMH. When Marshmallow released for Poland i did manage to put it on my device. Now... because XEO is a Multi-rom after a clean install my CSC went to TPH (Portugal) I searched for how to change csc without root l, (in this case XEO) but im failed to do it.
So guy, is there any option to do it?
Click to expand...
Click to collapse
+1
exactly samse problem/ question
laverdadb said:
Hey! My issue is to somehow change the CSC without root on my device. I live in Hungary. I bought my phone at carrier (T-Mobile) my original CSC is TMH. When Marshmallow released for Poland i did manage to put it on my device. Now... because XEO is a Multi-rom after a clean install my CSC went to TPH (Portugal) I searched for how to change csc without root (in this case XEO) but im failed to do it.
So guys, is there any option to do it?
Click to expand...
Click to collapse
Did you Try to Flash your stock original carrier rom via odin ,reboot stock recovery and do factory reset?
SETOUF said:
Did you Try to Flash your stock original carrier rom via odin ,reboot stock recovery and do factory reset?
Click to expand...
Click to collapse
I did. Still one TPH. :/
Please read my answer in this topic. I had a very similar problem.
http://forum.xda-developers.com/s6-edge-plus/help/flash-poland-to-finland-mm-advice-pls-t3331911
gartner83 said:
Please read my answer in this topic. I had a very similar problem.
http://forum.xda-developers.com/s6-edge-plus/help/flash-poland-to-finland-mm-advice-pls-t3331911
Click to expand...
Click to collapse
it is not similar; we are here talking about the only PIT available for us, OXX, which includes XEO, ROM, SIO etc but default one seems to be TPH, and factory reset brings us always to TPH
ionutdicu said:
it is not similar; we are here talking about the only PIT available for us, OXX, which includes XEO, ROM, SIO etc but default one seems to be TPH, and factory reset brings us always to TPH
Click to expand...
Click to collapse
I had to flash 5.1.1 BTU to get rid of TPH. From there on, I came back to my original CSC. Therefore, I changed my CSC from TPH to SIM without root.
Edit: if I understand correctly, you can't flash BTU over TPH and then your original over BTU?
gartner83 said:
I had to flash 5.1.1 BTU to get rid of TPH. From there on, I came back to my original CSC. Therefore, I changed my CSC from TPH to SIM without root.
Edit: if I understand correctly, you can't flash BTU over TPH and then your original over BTU?
Click to expand...
Click to collapse
1. when flashing 601 XEO I was on 511 BTU, but the CSC it applied was TPH, even after factory reset
2. SIM is in different PIT than XEO so you got lucky....
ionutdicu said:
1. when flashing 601 XEO I was on 511 BTU, but the CSC it applied was TPH, even after factory reset
2. SIM is in different PIT than XEO so you got lucky....
Click to expand...
Click to collapse
Yes,but i went from TPH to BTU and then from BTU to SIM. That's why I don't understand why you can't. Flash 5.1.1 from BTU in Odin, do a factory reset after BTU flash and TPH will be gone.
On older Samsung phones there was a code that you dial in the dial pad, which opened a menu so you can chose your CSC, but I don't know if it still works on the newer phones.
celeronix said:
On older Samsung phones there was a code that you dial in the dial pad, which opened a menu so you can chose your CSC, but I don't know if it still works on the newer phones.
Click to expand...
Click to collapse
Not working anymore...
gartner83 said:
Yes,but i went from TPH to BTU and then from BTU to SIM. That's why I don't understand why you can't. Flash 5.1.1 from BTU in Odin, do a factory reset after BTU flash and TPH will be gone.
Click to expand...
Click to collapse
"do a factory reset after BTU flash and TPH will be gone"
right after ODIN flash, NOT auto rebbot, however GO to recovery instead? and wipe all the things, and rebbot, to initial setup?
Hello,
i have a belgian S7 edge and flashed a while ago the british nougat beta firmware.
yesterday i wanted to go back to my countries own firmware but was still marshmallow on sammobile.
so i installed this version using odin.
but when i did a recovery and wiped everything it installed german apps and the language was in german.
i tought that my CSC wasnt correct so i only flashed the CSC from the marshmallow rom for my country but the problem remains.
now i have multi CSC but i only want one and that is CSC PRO (Belgium Proximus)
how can i fix this? i tried the code with *#27*imei# but nothing works?
because of this problem i cannot use VOLTE on my own operator.
You need to flash a totally different CSC that is not multi csc with re partiton enabled in Odin... then flash the csc you want to be on again with re partition enabled in Odin.
And which csc shpuld i choose for example?
_DrG_ said:
You need to flash a totally different CSC that is not multi csc with re partiton enabled in Odin... then flash the csc you want to be on again with re partition enabled in Odin.
Click to expand...
Click to collapse
And which csc should i choose for example?
nielsvg said:
And which csc should i choose for example?
Click to expand...
Click to collapse
Try flashing a KSA CSC firmware (Saudi Arabia) and then flash the CSC firmware you want
I also have the same problem. Last month I flashed a BTU firmware because I haven't got the Nougat update yet here in the Philippines and I really wanted to try out the Nougat update as soon as it started rolling out in UK. This month the Nougat update finally rolled out here in the Philippines so I decided to go back to Philippine firmware which is XTC. After flashing I got the Thailand CSC (THL) even though I flashed the Philippine firmware (XTC). My s7e is not rooted and I have no plans on rooting it. Can someone help me go back to Philippine CSC? Thanks in advance.
Piravinth said:
Try flashing a KSA CSC firmware (Saudi Arabia) and then flash the CSC firmware you want
Click to expand...
Click to collapse
And this will surely work because on sammobile forum they say it isnt possible to change it back
nielsvg said:
And this will surely work because on sammobile forum they say it isnt possible to change it back
Click to expand...
Click to collapse
The CSC you are trying to flash maybe part of the same firmware so you have to change to another csc entirely. Try KSA CSC firmware and flash the PRO CSC firmware
I am in the UK and my phone orgibally had XEU CSC and I wanted to flash the BTU CSC to get Nougat however because BTU and XEU were in the same firmware this meant when I flashed the BTU CSC I still had the XEU CSC.
So I flashed KSA CSC and flashed BTU CSC and now I have BTU
Piravinth said:
The KSA CSC wouldn't be part of the multi-csc you have so if you flash that and flash the firmware that has the CSC you want you should get that CSC
I am in the UK and had the XEU CSC and wanted to flash the BTU CSC to get Nougat however because BTU is part of a multi-csc this meant when I flashed the BTU CSC I still had the XEU CSC. I flashed KSA CSC and flashed BTU CSC and now I have BTU
Click to expand...
Click to collapse
Do i have to turn on re partitioning when flashing ksa csc and have i turn it on again when flashing pro csc ?
nielsvg said:
Do i have to turn on re partitioning when flashing ksa csc and have i turn it on again when flashing pro csc ?
Click to expand...
Click to collapse
Yes
Piravinth said:
Yes
Click to expand...
Click to collapse
Final check to be definitive sure
So when finally flashing pro software with pro csc re partitioning had to be turned on
nielsvg said:
Final check to be definitive sure
So when finally flashing pro software with pro csc re partitioning had to be turned on
Click to expand...
Click to collapse
Yes that's what I did and to receive OTA update wipe cache and data, I did it after flashing ksa and BTU just to be sure
Piravinth said:
Yes that's what I did and to receive OTA update wipe cache and data, I did it after flashing ksa and BTU just to be sure
Click to expand...
Click to collapse
ok thx will try it now
nielsvg said:
ok thx will try it now
Click to expand...
Click to collapse
Also flash the KSA firmware with reparation enabled
Piravinth said:
Also flash the KSA firmware with reparation enabled
Click to expand...
Click to collapse
never had a problem with odin but now first time it said failed.
and now second and thirthed time it didnt do anything. it kept saying setupconnection but nothing else happened.
nielsvg said:
never had a problem with odin but now first time it said failed.
and now second and thirthed time it didnt do anything. it kept saying setupconnection but nothing else happened.
Click to expand...
Click to collapse
Are you using the latest version, v 3.12.3?
Under options in odin the following should be ticked;
Auto Reboot
Re-Partion
F.Reset Time
Piravinth said:
Are you using the latest version, v 3.12.3?
Under options in odin the following should be ticked;
Auto Reboot
Re-Partion
F.Reset Time
Click to expand...
Click to collapse
thx was using older model. i use it a lot but now i am having doubts.
do i only have to add the AP file or do i have to choose the AP file and the CSC file?
nielsvg said:
thx was using older model. i use it a lot but now i am having doubts.
do i only have to add the AP file or do i have to choose the AP file and the CSC file?
Click to expand...
Click to collapse
I added the files into ; BL, AP, CP and CSC. For CSC I didn't choose the home_CSC but the other one
Piravinth said:
I added the files into ; BL, AP, CP and CSC. For CSC I didn't choose the home_CSC but the other one
Click to expand...
Click to collapse
It didnt work. Still on german csc. I did a complete wipe in recovery mode but it is still the same.
I didnt do thuis procedure when i flashed the ksa version
nielsvg said:
It didnt work. Still on german csc. I did a complete wipe in recovery mode but it is still the same.
I didnt do thuis procedure when i flashed the ksa version
Click to expand...
Click to collapse
What is going on?
When flashing the KSA CSC firmware, did you add the BL,AP,CP AND CSC files and did you choose the csc file and not the home csc?
Did you follow the same step when flashing PRO CSC firmware?
hello. with odin i can't be able to flash firmware TIM italy nougat or oreo. it try to flash but fails in 1 second. instead if i flash nobrand firmware oreo or nougat it go fine. is it impossible or do i wrong anything? i used home csc file but no results. i hope an answer
Use csc not home_csc
Thanks many... And after can i return to unbranded using csc again?
Yes just flash unbranded firmware. Use Odin 3.13.1 for Oreo firmware