Related
Hello fellows,
When there's more than one "pending" icon near the clock, such as: new message arrived, phone call missed, speakerphone ON, etc. -- they are (expectedly) replaced by one icon that looks like a bubble with some lines in it.
It's great way to see there are many notifications waiting for you. When clicked, this icon displays another row with all the constituent icons.
However, with O2 1.72.187 image (without Blackberry support as I don't need it) there is a permanent O2 icon displayed. And the worst about it is -- it is treated just like it IS one of "pending notice" icons! So if you get a text message, you don't have cute envelope icon, but you have a BUBBLE already!
Previous versions allowed to move the O2 icon (centre or left), and it didn't count as notice, so "new message", or "Missed call" icon displayed as is - and only when you had let's say "new message" AND "missed call" you used to get the "composite" bubble icon. Now you can not do anything with O2 icon (it used to display connections menu), and it's just a piece of ****e sitting there for no reason.
That issue really ticks me off as I can't instantly see on the screen - what exactly has my XDA II received! The red LED on the top right corner is very helpful to indicate waiting things, and if I could somehow make that O2 icon to NOT count into pending icons -- or may be just bump up +1 the wrap limit for that place, so it would accomodate one more icon before wrapping into bubble icon, -- I'd be a happy camper.
Can it be done via registry?
Thank you for your attention!
Speach Bubble
I have the same frustration. Hoping that some wiszzard out there will be able to help
Speach Bubble
I have the same frustration. Hoping that some wiszzard out there will be able to help
Speach Bubble
I have the same frustration. Hoping that some wiszzard out there will be able to help
I looked into this thing with the O2 icon. Before the 1.72 release it used to allow selection of connection and to disconnect. It was also possible to position it elsewhere. Now all that is possible is to tap it and it brings up O2 Active. It sucks. :evil:.
I found the registry entry that specifies the position of the icon, but altering it is useless because when ever O2 Active starts it changes the registry entry back to its 'middle' position setting. Sort of defeats the object of having the data in the registry in the first place! Even deleting the entry in the registry is no good as O2 Active re-creates it! :roll:.
I dont have the O2 Active burtton no more, i deleted it from the startup folder in windows and it doesnt load it up at start up, but if you click O2 Active then it shows up and you have to restart the xda2 again to get rid of it...
Thank you guys for your involvement.
I tried to just stop O2 app; it only could be cancelled with End Task, and the bloody icon still sat there, only this time doing nothing.
Seeing not much practical use in that "newfangled" O2 icon -- I thought I'll rather give up that interface at all.
Thank you dcs, it looks like they really deliberately locked things up to make it linger -- breaking the good thing and achieving the opposite effect. The old O2 app icon was a) useful; b) moveable between left corner & centre and c) didn't spoil the notifications count, so I didn't mind.
So I just went to add/remove programs and scrapped both O2 apps.
Then had to change background, as even after reboot there was ugly leftover on the screen (I think the right part remained transparent, ugh :evil. Finally it is all working fine now and I see what comes to my XDA2.
Enough time spent, mine and yours. It better be changed in next versions, or will be permanently kept out of my XDA-2.
<rant>Whoever designed that change just drove me off using the O2 app. (Talk about luring new customers?) I sincerely hope someone from O2 reads all the bitter words in this thread, and passes them to people responsible for packaging new OS versions. I like O2 as company, but the current state of O2 app is an abomination. (Also lots of referenced to paid services from the menu, but lack of free services)
By losing this app, there is no way I can subscribe to any of O2 "value-added" services. I have TomTom for realtime voice "satnav" and AvantGo for my news -- all with no rolling subscription fees.</rant>
EastExpert said:
So I just went to add/remove programs and scrapped both O2 apps.
Then had to change background, as even after reboot there was ugly leftover on the screen (I think the right part remained transparent, ugh :evil. Finally it is all working fine now.
Click to expand...
Click to collapse
Out of interest, just selecting a different theme in the Today settings clears the display problem (after uninstall) or prevents it from happening if done before uninstalling.
dcs said:
Out of interest, just selecting a different theme in the Today settings clears the display problem (after uninstall) or prevents it from happening if done before uninstalling.
Click to expand...
Click to collapse
May be I had selected a wrong theme, (or may be the same theme and didn't realise it), but I had to also [x] "change background" checkbox. Then I selected the bright blue Default and that was it
Edit: "Change background" has nothing to do with background problem it's actually related to adjacent Browse button.
In fact there were only 4 Today themes that had this problem, all the rest of them worked fine. I presume they were old version or something.
Glad that you managed to solve the problem. However, mine continues as I use CommonTime mNotes to interface to Lotus Notes.
So whereas I has the speach bubble permanently on the today screen (sharing the frustration that I didn't know when I had received a missed call/SMS, revceived a new note etc), I now have a permanent 'M' symbol where the speach bubble originally was.
I really just want it blank and only to come up with a speach bubble where there is something new.
How do I get rid of the 'M'?
Any advise would be greatly appreciated.
Version 1.0 Released :
Features :
1. All the icons can be customized in a simple Configx.txt File.
2. All the Text under the Icons is also in the Configx.txt File
3. All Applications thats executed can be customized in the Configx.txt file
Lemme Explain about the Configx.txt files
Its in the Following Format :
1.It first has the 16 icons paths as in \Icons\*.bmp
2.Then 16 Names for the icons
3.The then 16 application paths that will run for the apps as in \Windows\calendar.exe for example to launch the calendar
4. BottomDockVisible=0 0 is to hide and 1 is to show th bottom dock
Installation : Insal the CAB file. (It will ceate the folder and the Start Menu Item then :
1. Extract the iPhone1.0.zip file into this folder
\Progrm Files\IPhone\Iphone.exe
\Progrm Files\IPhone\Config1.txt up to config5.txt - Configuration Files
\Progrm Files\IPhone\Signal.txt - App to run when clicking on Signal Indicator or centre button on navi pad (I use slider for this)
\Progrm Files\IPhone\Icons - All Icon Files
\Progrm Files\iphone.txt - Other settings
Final Notes :
Clicking on the battery will quit the app or return to page 1 if on another page
Version History :
0.90 Signal Strength, Operator Inidicator, Battery Level not Live
0.91 Signal Strength Working, Operator Name Working, Battery Level Still not Working
0.92 Battery, Signal Strength, Operator Name Live, added Wiki Icon.
0.93 Battery, Signal Strentgh, Operator Name now revoers after wakeup and added iphone ringtone
0.94 Automatically centres text for icon descriptions, has .lnk support including parameters.
0.95 Few changes, the second icon in the bottom row is now used for missed calls, sms and email notification. If upgrading from older version please go to http://forum.xda-developers.com/show...=1#post1234936 and refer to post 148.
0.96 All known issues have been resolved. sms, email, missed call notification. Also shows number of unread mails and missed call count.
0.97Four extra Pages added, to use them enter either page1 or page2 or page3 or page4 instead of the .exe file name
If you dont wanna make use of the notification please add a ,9 after the images eg \icons\phone.bmp,\icons\phone-alert.bmp,9
To hide an Image and its text add a ,0 after the image eg \icons\comm.bmp,0
0.99 After about 7 months. I think all the bugs have been resolved and added some popping away function when switching pages as well as running apps.x Popping away animationis set in the iphone.txt file. 0 disabled and any number will set the pop away speed
- Making all pages accessable from any page.
- WM2003 background fixed
- 12/24 hour clock support
- Animation added
- Only one form but multiple pages - one instance
1.0 All bugs removed, link files updated. Can hide any icon by adding a ,0 after it and can isable any of the three bottom notifition icons by addin a ,9 after it
One last thing: I explained the .lnk files format but some people cant read through the pages. pp9939068 explains it in datail on page 41 post 408 please look at it http://forum.xda-developers.com/show...302739&page=41
When Upgrading u guys please read th readme file in the zip file, I changed a lot in the format.
If you like this app Click Here to make a donation
Some people dont wanna use the bottm 3 icons as notification icons so to disable it add a ,9 after the one you want disabled, u can also hide the bottom 4 icons by adding a ,0 after all of them and to hide the complete bottob dock change the 1 on the last line in the specific config file to a 0.
If the .Cab file wont install, just unzip the iphone-1.exe.zip file into the \Program Files\iPhone\ folder
I fixed the bug for at & T and moved everything up and smaller to make space for the blue tooth icons coming soon
Inphy release the new iconfig for iphone 1.0 please find it at http://forum.xda-developers.com/showthread.php?t=306616
Development stopped!!
There is a new iphone out there that seems much better please have a look : http://forum.xda-developers.com/showthread.php?t=369241
yes. Good job and wow it is surely a long time ago, i wasnt even on xda by that time,
cheers!
will this version work on qvga (240x240)? i remember the last version wasn't soo......? lol
missing link
The program looks good and it feels good. Maybe I'll make a mistake but (MDA TOUCH, WM6) The phone button responds with a error (File not found \windows\vtkey.exe). Same error when trying to use the battery button, \windows\power.exe.
Is there a solution ?
Now all we need is an iphone like photo viewer, what you can navigate with your fingertips..
Any idea?
photo
Now all we need is an iphone like photo viewer what you can navigate with your fingertpis
any idea?
ejansen said:
The program looks good and it feels good. Maybe I'll make a mistake but (MDA TOUCH, WM6) The phone button responds with a error (File not found \windows\vtkey.exe). Same error when trying to use the battery button, \windows\power.exe.
Is there a solution ?
Click to expand...
Click to collapse
Yes its different for most devices/Os's so go into the \windows folder and find out which files do what and simply change the config1.txt file
typhoone said:
will this version work on qvga (240x240)? i remember the last version wasn't soo......? lol
Click to expand...
Click to collapse
I really wish I could help but its very difficult to change stuff without having a 240x240 device. Mine is a TYTN2 240x320 so i cant help sorry man. Ill have a look on the weekend and see if i can try and make a plan
justcruising said:
Now all we need is an iphone like photo viewer what you can navigate with your fingertpis
any idea?
Click to expand...
Click to collapse
I dont know what it looks like. Try and get a video or something and im sure i can try and develop it
Grumps said:
I dont know what it looks like. Try and get a video or something and im sure i can try and develop it
Click to expand...
Click to collapse
the "HTC Photo Album" is good and so is ImageViewer from pocketcm.com . Both free.
qvga only ?
NICE APP
Grumps,
VERY NICE APP. I am using it and it is great. Works well with S2U2 version too. My input for cometics only:
a. Can we put the operator name closer to the signal bar? This will allow room for other indicators such as Wifi and BT.
b. Can we have BT and Wifi indicator on the top bar? These two will make the SW going from COOL to WHOA!!!!!
Thanks and cant wait for your next release.
HaiLe512 said:
Grumps,
VERY NICE APP. I am using it and it is great. Works well with S2U2 version too. My input for cometics only:
a. Can we put the operator name closer to the signal bar? This will allow room for other indicators such as Wifi and BT.
b. Can we have BT and Wifi indicator on the top bar? These two will make the SW going from COOL to WHOA!!!!!
Thanks and cant wait for your next release.
Click to expand...
Click to collapse
I can the only problem is what do we do if the operator name is too long mine is HSDPA Vodacom SA and I made it so its just fits??
If i make it smaller it might say HSDPA Vodaco or something and ill hear more people crying? Any suggestions
And yes only QVGA, I dont have a VGA device to develop with sorry
This is a great app except...
There's no animation when you launch something. Or highlight. So sometimes you press again while waiting for something to start up.
Can we please get some sort of feedback when it's accepted the fact you pressed a button? Not sure how this works on the fruit based phone but I'm sure there should be some feedback.
Thanks.
ok just want to say great app.
here are some suggestion for you on the next version.
add scrolling to the app so if you want to add more icons on one page you can.
let it pick up default icons from the programs so you don't have to waste anytime on picking an icon for it. (but you can if you want too.)
scroll with finger to go right or left to go to the next page.
i have some other ideas and i would like to share it with you. if you are interested please P.m.
thanks,
the changelog says it has animations now. I just can't see any. What is meant by "animation added"?
Great work anyways.
BTW: Being able to scroll only one of the horizontal lines from left to right would be great, for, let's say, less important apps. So you have 3 rows of static buttons and just one row that can be scrolled by finger gestures... Saw that on iPhone, looked amazing...
I Concur
IMO, it would be great to have a scrolling launch page. Either horizontal or vertical. Also, annimation and vibrate with icon color change to reflect program choice.
Does the calendar icon keep up with the actual date??
Thanks,
CG
Thanks for such a GREAT app - assigned a button to it and it works like a charm. I do have one question \ request: is it possible to move the title bar elements up a bit? I use an app to hide the Windows Start bar and the softkeys (it is one of Vijay's tools) and your app then acts as my home page for most running applications (there are a few exceptions but overall it works great). The only issue is that the elements on your app (clock, battery, signal indicator, etc.) are a little low (2 pixels or so) so things look a little "off". I was hoping it was or could be a user changable setting.
Please don't take this as a complaint! Your app, combined with S2U2 provide an excellent UI experience. Thanks again for such excellent work.
kenlewisesq said:
Thanks for such a GREAT app - assigned a button to it and it works like a charm. I do have one question \ request: is it possible to move the title bar elements up a bit? I use an app to hide the Windows Start bar and the softkeys (it is one of Vijay's tools) and your app then acts as my home page for most running applications (there are a few exceptions but overall it works great). The only issue is that the elements on your app (clock, battery, signal indicator, etc.) are a little low (2 pixels or so) so things look a little "off". I was hoping it was or could be a user changable setting.
Please don't take this as a complaint! Your app, combined with S2U2 provide an excellent UI experience. Thanks again for such excellent work.
Click to expand...
Click to collapse
Good idea to assign it to a button, I was trying to figure out how to integrate it better as a complete solution. Only problem is that on the Touch there is only really one button I can use and I was using it for the Full Screen Keyboard and to hold it down to get voice dial. I'm sure I'll work something out though.
I saw the link in the first post talking about how to get the .lnk files right and I assume that means for the Phone/Calc/etc which do not have .exes that I can easily find. I'll do some research to get that working.
Thanks for a great app!
Thanks for the info
Grumps said:
I can the only problem is what do we do if the operator name is too long mine is HSDPA Vodacom SA and I made it so its just fits??
If i make it smaller it might say HSDPA Vodaco or something and ill hear more people crying? Any suggestions
And yes only QVGA, I dont have a VGA device to develop with sorry
Click to expand...
Click to collapse
Grumps,
Thanks for the info. I can see the name is an issue. If it is moved left align one space right after the signal strength then it will be good even with the longer operator name. If it is done that way, then if the BT and WiFi indicators are needed, that is when they are turned on, then they can be arranged to the left of the clock. These will cover the last portion of the long operator name but I think it will be acceptable because many things operate in the same manner due to the fact that there is not enough space for everything.
Thanks again for this VERY NICE APP. IT ROCKS!
I'm about finishing a plugin for Today Screen and Home Screen, where the latest status of prepaid SIM Card (account) is displayed.
As you know, to get this status, you have to send a special code. Mostly, it is *101# and a green phone button. In reply, cellular network responses with a special message. As I could check that replies in a few networks, messages depend from the cellular network. And the language too. Because of that, my plugin just displays a whole message without changes.
My question is: how that reply messages look like in various networks? Could you please post here message you get?
I want to get answer, what is maximum length of such messages, to save the space of screen. Or maybe to use its content and reformat the display style finally (what's - I'm afraid - impossible due to many languages used). Correct me.
If you use prepaid card, please send *101# code (or maybe in some other networks it is different code?), and give the answer you got from cellular network in reply.
"Creditul tau de xxx.xx EURcenti este activ inclusiv pana la dd/mm/yy"
this is how it looks on Orange romania.
hope it helps.
but there is a catch... if i have extra options(like bonus free minutes) when i dial the check credit number(*133#) i also receive a separate sms(from a different number(333) )showing me the free minutes left...
i also have a small question... do you know a good USSD program that is compatible with mio?
In Belgium with provider PROXIMUS, dial code is #121# and result is formatted as Credit: nnn.nn EUR Validite dd/mm/yyyy
Vodafone Germany
Dail code for Vodafone Germany is *100#. The reply is: Ihr Kontostand betraegt xx.xx Euro.
Looking forward to check out the plug-in.
I use another prog - dciBalance - and get a relult ot Today like:
"Balanse: xx$ (-0,5$) 7:34, 07.12.2007 "
where xx$ - balance, (-0,5$) changes by per day, and time\date of cheching
is dciBalance also available in english?
no dciBalance available only on Russian....
But it is not very hard to understand "how to"
Thank for comments.
I don't know the above other program with similar funtions, and I even did not tried it.
That's why my concept is stay as: to leave an original reply message in original language. This will run independently from particular country or cellular network. Certainly, I added options to change the default code *101# to whatever some user will need in some localization or situation.
Have anybody heard, that any network charges for USSD questions?
Currently, my program checks the status: on every wake up, on every midnite, and if user will check the option: on every hour. I can add more options like: after every phone call finished, or after every message sent. But... it consumes battery. I'm already under deeper tests how it works relative to battery reasonably discharging.
User can force the checking any time manually, by selecting this plugin and press Action or Enter button.
when will we see the app?
sounds very interesting. yeah, when can we see this app?
anybody know the ussd code for vodafone nz??
beta version is here
Ok. Here it is a Beta Version. It will expire on the end of year.
This is a version for PPC only (incl. VGA), Smartphone HomeScreen plugin is upcoming... Please, users of Smartphones: give your comments what you see after *101# code and how it is displayed, or similar...
After installation:
- in PPC please check, if it is marked on system Today items list
- in SP please select one of new Home SCreen style with "prepaid..." in name
or build your own Home Screen, this plugin you get with:
<plugin clsid="{6A59C93A-4B8A-46c1-873B-269E93A8CE27}" name="prepaidstatus" height="25"><background><format state="selected" bgcolor="COLOR_HOMEHIGHLIGHT"/></background></plugin>
Changes:
- added delay of 10sec. in first checking since activate
- added delay of 5 sec. after wake up
- added icon of Settings... in default Programs folder (for future SP version)
- added destroying default notification icons (not sure if it works well in all devices, yet)
- added breaking each sentence for new line
- added "red alert", when your value is below specified limit (background becomes red and text white, do you want sounds?)
- added text "awaiting notification" while the request is running...
- added text "unresponsived" while network did not replied correctly
- reply message length limited do 200 characters
Some possible problems:
- in some devices I observe that after checking the status the phone line is not active till I use default Phone dialog next time. Not sure about it.
- in some devices I still cannot destroy the default notification icon of USSD reply, it is generated after every checking and collect together in status bar. If you use automatically checking, it will become a huge number of icons.
If you uncheck all available options for automatically requesting the status, you can always force it manually by pressing Action or tap the screen on this Today Item.
All comments are welcome and awating...
Files updated on 11 Dec. 2007
hello!
i tested it for a short while and here are first impressions.
Looks amaising, with a minor bug check the pic.
is it normal to show a red background?
A small sugestion....(from my little programing skills...) i believe it is possible to make the program search the ussd for the first set of numbers and display it, so that it will only show the credit. don't you think this will be a nice improvement?
thanks for comments. looks like the problem with "red alert". I will check and fix very soon.
I'm not sure about the concept of "first digit" because I don't know if this rule works in all languages and all network codes. I use this idea to define/determine "red alert" and maybe this is wrong.
there is also a small bug with the settings window... if you open the settings and pop up the keyboard the whole settings moves up, out of the window(first pic)
on Tele2 Sweden its *111#
gives you:
SALDO: xxx.xx Prisplan: Comviq Kontant Kompis. Kortet F n giltigt till 6/12-2008.
that is Prisplan = what sort of card you have
F n giltigt = expires day
I just updated the .cab file, small bug with "red alert" fixed.
If someone will get problem with red background and alert, please set 0 value for its limits. In this case it will not run.
To correctly upload the new version:
- uncheck this item from the list
- remove from default Remove Programs
- make a soft-reset
- re-install the new one
Strange with the Settings dialog. It's not in all my devices already.
Certainly, "last reported..." displays Today's time, and the date if it was not today.
Extend the USSD code
Is it possible to set the program for a longer USSD code?.
Meteor IE is using *#100# for their credit balance USSD code. I have tried inputing the code but it kept cutting of the last #.
ps:- nice work btw
I will try to fix. Thanks for comments.
hmm... after rechecking the settings tab, it seems that sometimes when i open settings the top bar vanishes and the whole settings prog moves up and after a couple of seconds the top bar reapears... that's what happens in the above pic....
unfortunetly i can't test the version very much because, as i told you, at every check i also receive a second sms, showing me the remaining free minutes and it is very annoing to delete them from my sms inbox...
btw, will the next version have the ussd send message balloon hidden?
Thanks for all this great work!
le: seems that most forum folks don't have prepay cards... 3 downloads so far... 2 by me
Both PPC and SP versions are now.
I just updated installation files, PPC and SP versions are available from now.
Several fixes included, also about automaticaly updating.
I'm not sure 100% about SP version, because such devices are very sensive for background proccess while the screen is going black (suspend, not like in PPC turns off). Next days will give answers if I thought correctly.
If you are wanting to add the DATA TOGGLE to the NOTE 4 - you can use a mod that was originally done for the NOTE 3 - I did a GOOGLE search to do it - and this is the information I came up - originally posted by @jdawgg21#AC at Android Central. The instructions call for SQLite to edit the text - but I am sure there are other solutions you can use - I just don't know enought about this to say exactly what to do - I had nothing to do with this instruction other than posting it here for anyone wanting to try it - @jdawgg21#AC deserves all the credit - if you GOOGLE search Add data toggle to Note 4 you will easily find the same thread I found.
GOOD LUCK! hope this helps - word of advice - when editing - the line you need to edit is WAY TOWARD THE BOTTOM - there are two or three different places that look like they are the one you need to edit - but only one is the right one - the title of that line is exactly as follows: notification_panel_default_active_app_list
so be careful when editing to make sure you are in the right line -
The instructions say NOTE 3 - but I am living proof that it works on Note 4- see attached ( it also worked on my S5)
DISCLAIMER: This is to add the MobileData toggle to your notification panel on the T-Mobile Samsung Galaxy Note 3. It might or might not work on the other models. Your phone has to be rooted in order for this to work. I'm not responsible if you screw something up on your device by not following directions.
Here are the steps I used:
1. Download the Sqlite Editor app from the playstore(costs
2.99)https://play.google.com/store/apps/d...ware.sqleditor
2. After it's download, it will ask for root permissions, click Grant and it should load the databases.
3. Go to the FILES tab
4. Click on data, then after it opens up, look for data again
5. After that happens, scroll down the list till you find com.android.providers.settings and click on it
6. Click on databases and then click on settings.db
7. After you click on settings.db, then you will see system, click on that and it should open up a long list
8. Look for notification_panel_active_app_list. It will be near to the bottom of the list. You will see notification_panel_default_active_app_list. That is not the correct one. Make sure it says notification_panel_active_app_list.
9. Click and hold it till a sub menu pops up. Click on Edit Record
10. You're going to see a list of toggles under values
11. At the end of that list, make sure there is a ; after the last word. Then enter MobileData and put ; right after it. No spaces.
12. It should look like this for example: AirplaneMode;MobileData;
13. Now click Save, Reboot the phone and when it comes back up, you should have a MobileData toggle in your notification panel in your settings
I did this one on my note 3 and its super easy but I think we need an insecure kernel. I haven't seen one yet. I'll try and report back.
Works great thanks
Sent from my SM-N910T using XDA Free mobile app
pipergca said:
I did this one on my note 3 and its super easy but I think we need an insecure kernel. I haven't seen one yet. I'll try and report back.
Click to expand...
Click to collapse
Did you read my post? I did it already - it is working no problem - I even posted a screen shot...
mocsab said:
Did you read my post? I did it already - it is working no problem - I even posted a screen shot...
Click to expand...
Click to collapse
lol no I didn't see that part. Thanks man
pipergca said:
Works great thanks
Sent from my SM-N910T using XDA Free mobile app
Click to expand...
Click to collapse
What was your input to add MobileHotSpot?
blacklabel2020 said:
What was your input to add MobileHotSpot?
Click to expand...
Click to collapse
;WiFiHotspot;
blacklabel2020 said:
What was your input to add MobileHotSpot?
Click to expand...
Click to collapse
WiFiHotspot (caps sensitive)
re: flashlight -torch
mocsab said:
If you are wanting to add the DATA TOGGLE to the NOTE 4 - you can use a mod that was originally done for the NOTE 3 - I did a GOOGLE search to do it - and this is the information I came up - originally posted by @jdawgg21#AC at Android Central. The instructions call for SQLite to edit the text - but I am sure there are other solutions you can use - I just don't know enought about this to say exactly what to do - I had nothing to do with this instruction other than posting it here for anyone wanting to try it - @jdawgg21#AC deserves all the credit - if you GOOGLE search Add data toggle to Note 4 you will easily find the same thread I found.
GOOD LUCK! hope this helps - word of advice - when editing - the line you need to edit is WAY TOWARD THE BOTTOM - there are two or three different places that look like they are the one you need to edit - but only one is the right one - the title of that line is exactly as follows: notification_panel_default_active_app_list
so be careful when editing to make sure you are in the right line -
The instructions say NOTE 3 - but I am living proof that it works on Note 4- see attached ( it also worked on my S5)
DISCLAIMER: This is to add the MobileData toggle to your notification panel on the T-Mobile Samsung Galaxy Note 3. It might or might not work on the other models. Your phone has to be rooted in order for this to work. I'm not responsible if you screw something up on your device by not following directions.
Here are the steps I used:
1. Download the Sqlite Editor app from the playstore(costs
2.99)https://play.google.com/store/apps/d...ware.sqleditor
2. After it's download, it will ask for root permissions, click Grant and it should load the databases.
3. Go to the FILES tab
4. Click on data, then after it opens up, look for data again
5. After that happens, scroll down the list till you find com.android.providers.settings and click on it
6. Click on databases and then click on settings.db
7. After you click on settings.db, then you will see system, click on that and it should open up a long list
8. Look for notification_panel_active_app_list. It will be near to the bottom of the list. You will see notification_panel_default_active_app_list. That is not the correct one. Make sure it says notification_panel_active_app_list.
9. Click and hold it till a sub menu pops up. Click on Edit Record
10. You're going to see a list of toggles under values
11. At the end of that list, make sure there is a ; after the last word. Then enter MobileData and put ; right after it. No spaces.
12. It should look like this for example: AirplaneMode;MobileData;
13. Now click Save, Reboot the phone and when it comes back up, you should have a MobileData toggle in your notification panel in your settings
Click to expand...
Click to collapse
Have you tried to add "FlashLight or Torch ?
One of those should work too.
Misterjunky said:
Have you tried to add "FlashLight or Torch ?
One of those should work too.
Click to expand...
Click to collapse
No I have not - but I would assume you could potentially do it the same way, couldn't you? As I posted, I merely copied this from someone else - so I really don't know if you can add torch that way or not?
My Wifi Hot Spot toggle quit working after the latest update. Any ideas how to get it back aside from wiping phone and Odin the full firmware?
pipergca said:
My Wifi Hot Spot toggle quit working after the latest update. Any ideas how to get it back aside from wiping phone and Odin the full firmware?
Click to expand...
Click to collapse
delete you WiFiHotSpot; entry
save and reboot
add again
save
Deleted
add ;Toolbox; to the list. Same as the s5 toolbox http://www.androidcentral.com/how-use-and-customize-toolbox-samsung-galaxy-s5
;ToddlerMode; adds network restriction toggle
Code:
Toolbox;
Seems to add an ICON but the toolbox does not seem to come up.
Flame Red said:
Code:
Toolbox;
Seems to add an ICON but the toolbox does not seem to come up.
Click to expand...
Click to collapse
Same here. Not sure how to get this to work.
Also, has anyone gotten the FlashLight / Flashlight / Torch to work?
Flashlight / Torch do not work, but FlashLight works by adding an empty toggle with no icon, and when I click on it, nothing happens.
Any ideas?
Is there a way to add "flashlight" to this as well?
Works, thanks a lot!
Hey everyone
I do not know why but the notifications are today shown as an arrow plus the count of notifications, even if there is enough space an only one (see Screenshot).
Somehow I can't post a screenshot of this, but just google for "notification arrow with plus sign" if you want to know.
Anyone know how to fix it?
Greetings
Kaiske
Edit : first appeared when I typed something with SwiftKey keyboard and received a snapchat notification
Edit 2: Okay, I found the solution by myself. After a Hard Reset I edited the Quick Settings in the Status Bar. And the last point in this screen is "Show only Quantity of Notifications in Status Bar" (sry if Translation ist wrong, using German as Language). And somehow I have checked this option and forgot about it.