Hey guys, today I rooted my phone and installed newest Viper's audio for android. Everything is OK, apart the driver installation. App asks me to install drivers and when I let it do that (with root permissions enabled) it tells me to reboot phone to complete the installation. When I reboot, driver status is "abnormal" and the app asks me to install drivers again. There is no end. Please, couldn't you guys try to install Viper if it is functioning? Or if I made mistake somwhere and I have to flash fresh ROM? I tried almost everything.
Thank you.
arharos said:
Hey guys, today I rooted my phone and installed newest Viper's audio for android. Everything is OK, apart the driver installation. App asks me to install drivers and when I let it do that (with root permissions enabled) it tells me to reboot phone to complete the installation. When I reboot, driver status is "abnormal" and the app asks me to install drivers again. There is no end. Please, couldn't you guys try to install Viper if it is functioning? Or if I made mistake somwhere and I have to flash fresh ROM? I tried almost everything.
Thank you.
Click to expand...
Click to collapse
If you are using Magisk. Open Magisk Manager. Install Viper4Android module from downloads, then go to root file manager. Open Root/system/vendor/etc folder. Change audio_effects.conf to audio_effects.conf.bak Restart your device and then check the status then it should work. If you are on SuperSU then just don't forget to rename audio effects file after driver installation.
Klawzy said:
If you are using Magisk. Open Magisk Manager. Install Viper4Android module from downloads, then go to root file manager. Open Root/system/vendor/etc folder. Change audio_effects.conf to audio_effects.conf.bak Restart your device and then check the status then it should work. If you are on SuperSU then just don't forget to rename audio effects file after driver installation.
Click to expand...
Click to collapse
I will second this method. Installing via Magisk is probably the only way I've found on Nougat to install Viper without trouble. I install through Magisk and then install the newest Viper4Android app from that thread. Drivers preinstalled.
Kindly Read forum rulea before creating a thread bro.
You have Created it in wrong section.
Ask in question and answers section . ?
Could someone link to viper they are using please
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
I have 2.4.0.1 by guitarhero that works, flashed via TWRP. I have to use an SELinux toggling app (only available via APK mirror or similar sites) to set SELinux to Permissive for it to work. The OS will flag the app as dangerous, but it's fine.
Oh sorry for wrong section. Thank you guys. I tried the magisk version but didn't work. Then I tried to flash Viper by guitarhero and this works, because the driver is flashed into system along with app. I even had a newer version installed (2.3.4.0) and when I started this newer version first rather than older guitarhero, it worked. So I suppose you just need to flash viper for driver and then you can run new versions.
Hi guys, why don't you install ViPER4Arise™ 2.5.0.5 module (ARISE™ themed version of ViPER4Android's latest DSP application with pre-installed driver. All ARISE™ artwork is the work and property of @churapa) ?
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
chrissss91 said:
Hi guys, why don't you install ViPER4Arise™ 2.5.0.5 module (ARISE™ themed version of ViPER4Android's latest DSP application with pre-installed driver. All ARISE™ artwork is the work and property of @churapa) ?
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
You mean all the magnus opus package (130MB)? Is it working also on enforcing or should I switch to permissive?
carlese said:
You mean all the magnus opus package (130MB)? Is it working also on enforcing or should I switch to permissive?
Click to expand...
Click to collapse
If you read the linked first post is says:
Magnum Opus™ Features:
- The most advanced and comprehensive sound system ever made available.
- Jellybean through Android O developer preview support.
- ARM, Mediatek™, Qualcomm™, 32bit, 64bit, and x86 support.
- Full SELinux Enforcing support
- Magisk™ support provided by the incredibly talented Zackptg5 and his Magisk™ Resource.
- 300MB of fully customizable sonic bliss.
So at least there is a claim of enforcement support.
3DSammy said:
If you read the linked first post is says:
Magnum Opus™ Features:
- The most advanced and comprehensive sound system ever made available.
- Jellybean through Android O developer preview support.
- ARM, Mediatek™, Qualcomm™, 32bit, 64bit, and x86 support.
- Full SELinux Enforcing support
- Magisk™ support provided by the incredibly talented Zackptg5 and his Magisk™ Resource.
- 300MB of fully customizable sonic bliss.
So at least there is a claim of enforcement support.
Click to expand...
Click to collapse
I know but that's a generic statement, as far as I know it takes time to make it work on new devices.. Can anyone confirm?
carlese said:
You mean all the magnus opus package (130MB)? Is it working also on enforcing or should I switch to permissive?
Click to expand...
Click to collapse
Hi,
I've installed :
- Core System module (required once during initial installation)
- ViPER4Arise™ 2.5.0.5 module (optional)
- ViPER4Arise™ Profiles module (optional)
No need to modify anything else.
Just carrefully read installation process (search "arise_customize.prop").
Viper4ARISE + Magisk mod works for me too. SafetyNet passes.
I did have to set "delete.deep_buffer=true" to get it to work with Google Play Music.
chrissss91 said:
Hi,
I've installed :
- Core System module (required once during initial installation)
- ViPER4Arise™ 2.5.0.5 module (optional)
- ViPER4Arise™ Profiles module (optional)
No need to modify anything else.
Just carrefully read installation process (search "arise_customize.prop").
Click to expand...
Click to collapse
After fiddling witht he file I managed to install it on my op5.. But status is "abnormal".. I tried uninstalling the driver and only then V4A asked for root permission, then rebooted and still there is no option to reinstall driver.. What can I do?
carlese said:
After fiddling witht he file I managed to install it on my op5.. But status is "abnormal".. I tried uninstalling the driver and only then V4A asked for root permission, then rebooted and still there is no option to reinstall driver.. What can I do?
Click to expand...
Click to collapse
No problem for me, are you sure you have installed the core version (install.core=true) ?
chrissss91 said:
No problem for me, are you sure you have installed the core version (install.core=true) ?
Click to expand...
Click to collapse
Sure, are using supersu or magisk? Did you install V4A module?
carlese said:
Sure, are using supersu or magisk? Did you install V4A module?
Click to expand...
Click to collapse
i've installed :
- core
- v4a_2.5.0.5
- v4a_profiles
An d I use Magisk 13.0 beta
chrissss91 said:
i've installed :
- core
- v4a_2.5.0.5
- v4a_profiles
An d I use Magisk 13.0 beta
Click to expand...
Click to collapse
Ok but on magisk, did you install the V4A module?
carlese said:
Ok but on magisk, did you install the V4A module?
Click to expand...
Click to collapse
No, only busybox
chrissss91 said:
No, only busybox
Click to expand...
Click to collapse
Which one? SOrry to bother you, I'm not a newbie but there are a lot of busybox out there, just want to check if everything works and follow what you did..
How did I install EdXposed framework on my Google Pixel 3a. Did it for Gravitybox AIO.
1. Installed latest Magisk v20 (guide is in this subforum) on latest Android 10 image.
2. Install Riru-Core v19+ from Magisk repo.
3. Download EdXposed and install it in Magisk Manager manual (modules-->+ and add zip you downloaded).
4. Install companion application-EdXposed manager.
5. Reboot.
Have fun!
The installation guide is here
Edit:
Gravitybox first crashed/did not open normally, so I changed the EdXposed from 3. to this YAHFA version from post #30
The yafha version you posted finally made my xposed work! I'm on latest December patch anx and confirmed working with these modules I use :
X screen stabilizer
Xinsta
Unclutter ig
Exi for SwiftKey, but some of the functions aren't
Thanks for this!
Got this working no problem but a lot of these modules on the repo are old AF!! I remember using a bunch of these back in my galaxy S5 days. Haven't gone thru all of them yet but nothing really catching my eye
installed riru core 19.5, edexposed manager and gravitybox...gravitybox keeps showing system framework not responding. exiting
any idea why?
drocny87 said:
installed riru core 19.5, edexposed manager and gravitybox...gravitybox keeps showing system framework not responding. exiting
any idea why?
Click to expand...
Click to collapse
Are you using the yahfa version from above??
I used yahfa 4.5.5 and it works...for some reason the latest version doesnt work
---------- Post added at 08:58 PM ---------- Previous post was at 08:57 PM ----------
thatsupnow said:
Are you using the yahfa version from above??
Click to expand...
Click to collapse
I used yahfa 4.5.5 and it works...for some reason the latest version doesnt work
drocny87 said:
I used yahfa 4.5.5 and it works...for some reason the latest version doesnt work
---------- Post added at 08:58 PM ---------- Previous post was at 08:57 PM ----------
I used yahfa 4.5.5 and it works...for some reason the latest version doesnt work
Click to expand...
Click to collapse
Yeah the latest isn't working for me, I don't know which version it is but the one on the OP edit is doing great over here
Are you using edge sense plus with this? I'm getting stick on boot screen after installing this module. The only other one I have right now is edge sense plus.
NeWCuLTKiNG said:
Are you using edge sense plus with this? I'm getting stick on boot screen after installing this module. The only other one I have right now is edge sense plus.
Click to expand...
Click to collapse
I'm using edge sense plus alongside edxposed with yafha version posted on the edit of the original post, and all is great
I followed this and I got it to work for a couple of seconds but everytime I try to open the app it crashes
b0li said:
3. Download EdXposed and install it in Magisk Manager manual (modules-->+ and add zip you downloaded).
Click to expand...
Click to collapse
This download site says "Notes: Since the above PR is not merged yet, to make those sepolicies present you have to use this build along with the customized Magisk build hosted here: https://github.com/solohsu/magisk_files."
I don't know what PR means and what it implys when the PR is not merged Did you do anything special?
First I just installed the non-YAHFA edXposed release and it seemed to work (bot Gravity Box crashed my device), did try the YAHFA version: Gravity Box crashes my device.
Changed the Magisk Update channel to this URL http://edxp.meowcat.org/repo/version.json (found this somewhere) and updated Magisk. It seemed that this is somehow another Magisk...? But after installing the YAHFA EdXposed module and Gravity Box my device crashes again.
Everything works fine until Gravity Box is installed.
In all cases the Pixel 3a XL reboots just some seconds after boot. Time and again!
It was really hard to disable the Magisk module in that short time to get back a working device.
None of you had such a problem?
emale999 said:
This download site says "Notes: Since the above PR is not merged yet, to make those sepolicies present you have to use this build along with the customized Magisk build hosted here: https://github.com/solohsu/magisk_files."
I don't know what PR means and what it implys when the PR is not merged Did you do anything special?
First I just installed the non-YAHFA edXposed release and it seemed to work (bot Gravity Box crashed my device), did try the YAHFA version: Gravity Box crashes my device.
Changed the Magisk Update channel to this URL http://edxp.meowcat.org/repo/version.json (found this somewhere) and updated Magisk. It seemed that this is somehow another Magisk...? But after installing the YAHFA EdXposed module and Gravity Box my device crashes again.
Everything works fine until Gravity Box is installed.
In all cases the Pixel 3a XL reboots just some seconds after boot. Time and again!
It was really hard to disable the Magisk module in that short time to get back a working device.
None of you had such a problem?
Click to expand...
Click to collapse
For the 3a XL, you can use official magisk. Just use the canary version (you can use https://del.dog/DebugMagiskCanary in the updater URL for it.) Then use the canary yahfa builds from the edxposed installer app. Gravity box for Android 10 should work fine with that setup, I was using it for a few months. Make sure the latest Riru core is installed from the magisk repo as well.
Sent from my Google Pixel 3a XL using XDA Labs
Skittles9823 said:
Then use the canary yahfa builds from the edxposed installer app.
Click to expand...
Click to collapse
Did you mean the edXposed Manager app from https://github.com/ElderDrivers/EdXposedManager/releases/?
And installing the "Framework" under tab Canary (see attached screenshot) just installs the Magisk Module? Didn't expect this because Magisk is nowhere mentioned...
Just don't want to install the wrong thing because of missing TWRP for Pixel 3a XL with Android 10 ... all risky enough
emale999 said:
Did you mean the edXposed Manager app from https://github.com/ElderDrivers/EdXposedManager/releases/?
And installing the "Framework" under tab Canary (see attached screenshot) just installs the Magisk Module? Didn't expect this because Magisk is nowhere mentioned...
Just don't want to install the wrong thing because of missing TWRP for Pixel 3a XL with Android 10 ... all risky enough
Click to expand...
Click to collapse
Yes that's correct. The zips there are for magisk and they'll flash fine. Everything worked perfectly when I was on stock on the January patch.
Sent from my Google Pixel 3a XL using XDA Labs
Yeah - thank you very much. I can confirm that this finally works!
EdXposed not working on Feb factory image
I have problem with February factory image, EdXposed is not working.
I'm coming form Pie, custom ROM.
Performed factory reset, flashed factory image from February (sargo-qq1a.200205.002-factory-36d5179f.zip),
Rooted with Magisk 20.3, installed Riru-core 19.7 and Riru-Edxposed 0.4.6.1 (4510) Yahfa, Edxposed Manager 4.5.4.
getting the following errors in the Verbose logs:
Code:
[FONT="Courier New"][SIZE="2"]03-07 13:27:20.648 883 883 I EdXposed: deopt boot image: false
03-07 13:27:20.648 883 883 I EdXposed: no module log: false
03-07 13:27:23.121 882 882 E EdXposed-Bridge: Cannot load any modules because /data/user_de/0/org.meowcat.edxposed.manager/conf/modules.list was not found
03-07 13:27:23.554 1471 1471 E EdXposed: mmap failed, errno = Permission denied
03-07 13:27:23.554 1471 1471 E EdXposed: cannot hook method
03-07 13:27:23.557 1471 1471 E EdXposed: error when hooking com.elderdrivers.riru.edxp._hooker.yahfa.StartBootstrapServicesHooker
03-07 13:27:23.557 1471 1471 E EdXposed: java.lang.RuntimeException: Failed to hook private void com.android.server.SystemServer.startBootstrapServices() with public static void com.elderdrivers.riru.edxp._hooker.yahfa.StartBootstrapServicesHooker.hook(java.lang.Object) throws java.lang.Throwable
03-07 13:27:23.557 1471 1471 E EdXposed: at com.elderdrivers.riru.edxp.core.yahfa.HookMain.backupAndHook(HookMain.java:136)
03-07 13:27:23.557 1471 1471 E EdXposed: at com.elderdrivers.riru.edxp.core.yahfa.HookMain.doHookDefault(HookMain.java:3097)
03-07 13:27:23.557 1471 1471 E EdXposed: at com.elderdrivers.riru.edxp.proxy.BaseRouter.startSystemServerHook(BaseRouter.java:134)
03-07 13:27:23.557 1471 1471 E EdXposed: at com.elderdrivers.riru.edxp._hooker.impl.SystemMain.afterHookedMethod(SystemMain.java:27)
03-07 13:27:23.557 1471 1471 E EdXposed: at de.robv.android.xposed.XC_MethodHook.callAfterHookedMethod(XC_MethodHook.java:68)
03-07 13:27:23.557 1471 1471 E EdXposed: at com.elderdrivers.riru.edxp._hooker.yahfa.SystemMainHooker.hook(SystemMainHooker.java:25)
03-07 13:27:23.557 1471 1471 E EdXposed: at com.android.server.SystemServer.createSystemContext(SystemServer.java:610)
03-07 13:27:23.557 1471 1471 E EdXposed: at com.android.server.SystemServer.run(SystemServer.java:495)
03-07 13:27:23.557 1471 1471 E EdXposed: at com.android.server.SystemServer.main(SystemServer.java:350)
03-07 13:27:23.557 1471 1471 E EdXposed: at java.lang.reflect.Method.invoke(Native Method)
03-07 13:27:23.557 1471 1471 E EdXposed: at com.android.internal.os.RuntimeInit$MethodAndArgsCaller.run(RuntimeInit.java:492)
03-07 13:27:23.557 1471 1471 E EdXposed: at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:908)
03-07 13:27:25.286 1471 1471 E EdXposed: mmap failed, errno = Permission denied
03-07 13:27:25.286 1471 1471 E EdXposed: cannot hook method
03-07 13:27:25.286 1471 1471 E EdXposed: error occur when generating dex. dexDir=null
[/SIZE][/FONT]
Gravitybox and XprivacyLua are not working, complaining on framework (XLua: 'Module not running or updated').
I've tried everything I can think of, different Riru Core, EdXposed and Manager versions, no luck.
Had the same issues with LineageOS 17.1 (which includes official Feb updates, I think) from this thread:
https://forum.xda-developers.com/showpost.php?p=81833597&postcount=4
After that I did factory reset again and flashed factory image from January, installed the same Magisk, Riru and EdXposed modules and everything works fine.
The flashed February image again (flash-all), tried Canary builds of Magisk and EdXposed and still getting same errors as above.
Any advise?
Pogo said:
I have problem with February factory image, EdXposed is not working.
I'm coming form Pie, custom ROM.
Performed factory reset, flashed factory image from February (sargo-qq1a.200205.002-factory-36d5179f.zip),
Rooted with Magisk 20.3, installed Riru-core 19.7 and Riru-Edxposed 0.4.6.1 (4510) Yahfa, Edxposed Manager 4.5.4.
getting the following errors in the Verbose logs:
Code:
[FONT="Courier New"][SIZE="2"]03-07 13:27:20.648 883 883 I EdXposed: deopt boot image: false
[/SIZE][/FONT]
Gravitybox and XprivacyLua are not working, complaining on framework (XLua: 'Module not running or updated').
I've tried everything I can think of, different Riru Core, EdXposed and Manager versions, no luck.
Had the same issues with LineageOS 17.1 (which includes official Feb updates, I think) from this thread:
https://forum.xda-developers.com/showpost.php?p=81833597&postcount=4
After that I did factory reset again and flashed factory image from January, installed the same Magisk, Riru and EdXposed modules and everything works fine.
The flashed February image again (flash-all), tried Canary builds of Magisk and EdXposed and still getting same errors as above.
Any advise?
Click to expand...
Click to collapse
Update:
I've managed to get EdXposed working on previous mentioned LineageOS 17.1 version. I'm not 100% sure about steps but from the memory require installing latest Canary version of Magisk and Magisk Manager. It seems the order is also important, i.e. install Magisk Manager before Magisk. I've followed these steps:
https://forum.xda-developers.com/showpost.php?p=82023057&postcount=3146
The versions and order are:
install Magisk Manager Canary, ver 72f677d (278)
install Magisk Canary, ver 72f677d (278)
install Riru-Core v 19.7
For these two I'm not sure about order:
install Riru-EdXposed v 0.4.6.0_beta YAHFA
install EdXposed Manager v 4.5.2
install your EdXposed modules
Note: these are general steps, some are omited like how to find these versions. Also, reboot the phone as required.
Both Gravitybox and XprivacyLua work and I'm no longer getting these errors in the EdXposed Manager logs.
After a day or two I did upgrade EdXposed Manager to ver 4.5.4 since ver 4.5.2 was complaining to be outdated. After upgrade both Verbose and modules logs are showing some errors but the modules seems to work well.
Since that LineageOS 17.1 version comes with Feb patches I'd assume it should work on all ROM's with Feb patch but I didn't test further.
Pixel 3a with stock ROM rooted using latest Magisk v20.3. Followed your instructions to install EdXposed, yet every time after I reboot and check the EdXposedManager v4.5.4, it says the "EdXposed Framework is not installed!"
The phone has the March 5, 2020 update, qq2a.200305.002 if that helps. I have tried both Riru - SandHook and Riru-YAHFA, and of course the core, Riru – Core module. Makes no difference
Pogo said:
Update:
I've managed to get EdXposed working on previous mentioned LineageOS 17.1 version. I'm not 100% sure about steps but from the memory require installing latest Canary version of Magisk and Magisk Manager. It seems the order is also important, i.e. install Magisk Manager before Magisk. I've followed these steps:
https://forum.xda-developers.com/showpost.php?p=82023057&postcount=3146
The versions and order are:
install Magisk Manager Canary, ver 72f677d (278)
install Magisk Canary, ver 72f677d (278)
install Riru-Core v 19.7
For these two I'm not sure about order:
install Riru-EdXposed v 0.4.6.0_beta YAHFA
install EdXposed Manager v 4.5.2
install your EdXposed modules
Note: these are general steps, some are omited like how to find these versions. Also, reboot the phone as required.
Both Gravitybox and XprivacyLua work and I'm no longer getting these errors in the EdXposed Manager logs.
After a day or two I did upgrade EdXposed Manager to ver 4.5.4 since ver 4.5.2 was complaining to be outdated. After upgrade both Verbose and modules logs are showing some errors but the modules seems to work well.
Since that LineageOS 17.1 version comes with Feb patches I'd assume it should work on all ROM's with Feb patch but I didn't test further.
Click to expand...
Click to collapse
Last night I had a problem after upgrading Riru-Core to ver 20.3. Long story short, I end up with factory reset and re-flashing Lineage 17.1 (here).
After that, I have a chance to played with some combinations of Magisk, Riru and EdXposed and here is what work for me.
- install latest Magisk Manager Canary
- install latest Magisk Canary
- follow instructions how to obtain root from here (Method 2)
- install Riru-Core v 21.2
- reboot
- install EdXposed Manager v 4.5.2
- install Riru-EdXposed v 0.4.6.0_beta YAHFA (from Magisk)
- reboot
- check in EdXposed Manager if EdXposed Framework is active
- install your EdXposed modules
- activate them, wait 10 sec and reboot
- check if all modules work
- install EdXposed Manager v 4.5.4
- install EdXposed Manager v 4.5.7
After the above steps, the XPrivacyLua was working (no "Module not running or updated" messages).
Please note this is not an ultimate guide, just what worked for me after trying many things. I did not try all possible combinations.
If after installing Riru-EdXposed and reboot the EdXposed Framework is not active, try something different.
Even if EdXposed Framework is active it doesn't necessary means everything is ok. Check EdXposed logs for clues, read the forums.
I'm running unofficial Lineage 17.1 build, with no gapps. Your mileage may vary even with same ROM and phone, depends on other apps and modules installed.
Pogo said:
Last night I had a problem after upgrading Riru-Core to ver 20.3. Long story short, I end up with factory reset and re-flashing Lineage 17.1 (here).
After that, I have a chance to played with some combinations of Magisk, Riru and EdXposed and here is what work for me.
- install latest Magisk Manager Canary
- install latest Magisk Canary
- follow instructions how to obtain root from here (Method 2)
- install Riru-Core v 21.2
- reboot
- install EdXposed Manager v 4.5.2
- install Riru-EdXposed v 0.4.6.0_beta YAHFA (from Magisk)
- reboot
- check in EdXposed Manager if EdXposed Framework is active
- install your EdXposed modules
- activate them, wait 10 sec and reboot
- check if all modules work
- install EdXposed Manager v 4.5.4
- install EdXposed Manager v 4.5.7
After the above steps, the XPrivacyLua was working (no "Module not running or updated" messages).
Please note this is not an ultimate guide, just what worked for me after trying many things. I did not try all possible combinations.
If after installing Riru-EdXposed and reboot the EdXposed Framework is not active, try something different.
Even if EdXposed Framework is active it doesn't necessary means everything is ok. Check EdXposed logs for clues, read the forums.
I'm running unofficial Lineage 17.1 build, with no gapps. Your mileage may vary even with same ROM and phone, depends on other apps and modules installed.
Click to expand...
Click to collapse
Yesterday, I have upgraded ROM to the latest Lineage 17.1 available and reinstalled Magisk and Exposed. And I run into the trouble with EdXposed again.
With latest Magisk, Riru Core and Riru-EdXposed the logs shows errors like "mmap failed, errno = Permission denied", "cannot hook method" and "Cannot load any modules".
The XprivacyLua and GravityBox won't work ("Module not running or updated").
I have tried Magisk Canary and EdXposed Canary builds, as well as different versions of each, no luck.
In the end this combination worked for me:
- install Magisk Manager 4.5.0
- set custom update channel: https://github.com/solohsu/magisk_files/blob/master/README.md
- install Magisk 20.1 from the above channel
- upgrade Magisk Manager to 4.5.1 also from the above channel
- follow instructions how to obtain root from here (Method 2)
- after flashing patched boot etc, install Riru-Core v 19.7
- reboot
- install Riru-EdXposed v 0.4.6.0_beta YAHFA
- install EdXposed Manager v 4.5.2
- reboot
- check for errors in EdXposed logs
- if no errors, install one EdXposed module
- wait 10 sec and reboot
- check for errors in EdXposed logs
- check if the module works fine
- install other EdXposed modules
- wait 10 sec and reboot
Later on, I have uploaded EdXposed Manager to 4.5.4. I would not dare to upgrade anything else, it's looks so fragile.
Hi all!
I constantly get blocked on Snapchat, since they notice im rooted.
Im on Alexis Rom 8.5.1, Android 9 with Magisk and MagiskManager installed.
SaftyNet Check is successful
Mods installed:
MagiskHide Props Config
Riru - Core & edXposed
Busybox for Android NDK
Snapchat i ticked under Magisk Hide, so it should not find that im rooted? But somehow it says im using 3rd party app or something and blocks me after 1 dag.
What am i missing? What more do i need to do?
i know snapchat works once hidden with magisk hide and busybox installed... however ive not got Riru - Core & edXposed chances are its picking up on that somehow
Noahproud said:
i know snapchat works once hidden with magisk hide and busybox installed... however ive not got Riru - Core & edXposed chances are its picking up on that somehow
Click to expand...
Click to collapse
Yeah just disable riru core and edxposed and it should work.
loni90 said:
Hi all!
I constantly get blocked on Snapchat, since they notice im rooted.
Im on Alexis Rom 8.5.1, Android 9 with Magisk and MagiskManager installed.
SaftyNet Check is successful
Mods installed:
MagiskHide Props Config
Riru - Core & edXposed
Busybox for Android NDK
Snapchat i ticked under Magisk Hide, so it should not find that im rooted? But somehow it says im using 3rd party app or something and blocks me after 1 dag.
What am i missing? What more do i need to do?
Click to expand...
Click to collapse
Hey,
I just wanted to ask if any solutions worked for you bc I have exactly the same problem. I am using Alexis ROM 9.2 (I guess) on my Galaxy s8 and I get locked out and banned for 24 hours every 2 or 3 days. I have no mods installed and I dont know what to do anymore...
Previously I installed bromite systemless webview and everything worked perfectly.
And when the update came I was not able to update it neither from f-droid nor magisk. Both failed.
I uninstalled the module and tried to re-install it but it failed.
(And also previously I was able to use chrome flags in bromite browser but now I couldn't)
Please help.
Thanks.
Strange51 said:
Previously I installed bromite systemless webview and everything worked perfectly.
And when the update came I was not able to update it neither from f-droid nor magisk. Both failed.
I uninstalled the module and tried to re-install it but it failed.
(And also previously I was able to use chrome flags in bromite browser but now I couldn't)
Please help.
Thanks.
Click to expand...
Click to collapse
Scroll down to install option
https://github.com/bromite/bromite/wiki/Installing-SystemWebView
Sent from my Mi Note 10 using XDA Labs
joke19 said:
Scroll down to install option
https://github.com/bromite/bromite/wiki/Installing-SystemWebView
Sent from my Mi Note 10 using XDA Labs
Click to expand...
Click to collapse
Do you know the reason why I can't install the module from magisk?
It shows this when I try to install from magisk:
"No capable apk was found, the files failed to download, or both!"
And also the method you shared would break the safetynet and I don't want that...