Hello mates,
How could I convert a tar file to zip? It's a modem for my G928F. I already have the tar file or would it be possible to flash it with Odin? Tks so much.
Guiry said:
Hello mates,
How could I convert a tar file to zip? It's a modem for my G928F. I already have the tar file or would it be possible to flash it with Odin? Tks so much.
Click to expand...
Click to collapse
Yes ! You can flash modem.tar in odin CP Section
See above about flashing a modem in odin.
But I found that I have to shut the phone down and boot into download mode using power + home + volume down. Rebooting into download mode from shutdown menu seems to not work when I flashed mine.
Related
hi guys i am looking for .PIT file and BOOTLOADER file for this phone..it someone has a back up could u plz upload it here? thanks
or another option is pointing me to download complete/full package firmware meaning the files/firmware does have:
PIT
BOOTLOADER
PDA
CSC
MODEM
http://forum.xda-developers.com/showthread.php?t=1465800
mizukage said:
hi guys i am looking for .PIT file and BOOTLOADER file for this phone..it someone has a back up could u plz upload it here? thanks
or another option is pointing me to download complete/full package firmware meaning the files/firmware does have:
PIT
BOOTLOADER
PDA
CSC
MODEM
Click to expand...
Click to collapse
direct link: http://d-h.st/PF5
from my youtube video
hi freand
gt-s5360 pit file
Help ! Nerd solution without computer
Hello i need flash boot loader and pit file via cwm. It is possible ? I dont have computer and i have the error e:cant mount data ... How to flash the stock ROM with bootloader and pit file without computer thanks a lot. I need this because i cant use Odin . i have any solution avaliable ? Sorry bad english
Pit
bootloader
pda
csc
modem
peles25 said:
Hello i need flash boot loader and pit file via cwm. It is possible ? I dont have computer and i have the error e:cant mount data ... How to flash the stock ROM with bootloader and pit file without computer thanks a lot. I need this because i cant use Odin . i have any solution avaliable ? Sorry bad english
Click to expand...
Click to collapse
Go to youtube. And type. Flash stock rom without computer. On galaxy y click on it there will be one. Back up file. Download. And. Use cwm. To. Restore ur. Stock. Rom. Or. Wait. For. 3 days. I will create. My. Backup. And will. Upload.
I am put PDA CSC phone flashing in odin3 v1.85
Also bootloop
What can I di
Make sure you choose right stock rom version.
I am looking to install this recovery: http://teamw.in/project/twrp2/182
It is TWRP recovery for the i9505 variant. I have the i337 model, the AT&T variant. I want to install the TWRP recovery for the S4 using Odin, and I do not see a tar file that I can flash through Odin for the AT&T variant. There is a tar file for the regular i9505 and I want to know if that will also work. If the answer is yes, could someone please tell me how to flash the recovery through Odin?
Hello,
Hotmail to the site and download the twrp file to flash with odin.
In odin select PDA and select he twrp file.
And done
Sent from my GT-I9505 using Tapatalk
tiagoggama said:
Hello,
Hotmail to the site and download the twrp file to flash with odin.
In odin select PDA and select he twrp file.
And done
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I do not see the PDA tab. I have 3.09 and it has BL, AP, CP, and CSC. What do I do?
What is the odin version
Sent from my GT-I9505 using Tapatalk
tiagoggama said:
What is the odin version
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
3.09
Jayfeather787 said:
I do not see the PDA tab. I have 3.09 and it has BL, AP, CP, and CSC. What do I do?
Click to expand...
Click to collapse
If it's older odin & doesn't have pda select ap & put .tar file in there
Download 3.07
Sent from my GT-I9505 using Tapatalk
Should I download 3.04?
tiagoggama said:
Download 3.07
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
3.07? Okay.
Jayfeather787 said:
3.07? Okay.
Click to expand...
Click to collapse
It´s DOne
tiagoggama said:
It´s DOne
Click to expand...
Click to collapse
It did not work. Odin said failed. Tried to flash factory image, also failed. Tried to flash pit file, also failed. HALP!
Jayfeather787 said:
It did not work. Odin said failed. Tried to flash factory image, also failed. Tried to flash pit file, also failed. HALP!
Click to expand...
Click to collapse
1. TWRP is HERE.
2. Select the latest .img and download it.
3. Download the above file. Using adb shell or terminal emulator:
su
dd if=/sdcard/recoveryfilename.img of=/dev/block/mmcblk0p21
Make certain that you get this command right. Typing the wrong number could result in a brick! . MORE INFO: HERE
OR
You can flash through ODIN the latest .tar.md5 (Philz Touch Recovery) like in pic attached. Click: HERE
Joku1981 said:
1. TWRP is HERE.
2. Select the latest .img and download it.
3. Download the above file. Using adb shell or terminal emulator:
su
dd if=/sdcard/recoveryfilename.img of=/dev/block/mmcblk0p21
Make certain that you get this command right. Typing the wrong number could result in a brick! . MORE INFO: HERE
OR
You can flash through ODIN the latest .tar.md5 (Philz Touch Recovery) like in pic attached. Click: HERE
Click to expand...
Click to collapse
Did that it did not work. It seems there is no recvoery anymore. If I try to boot into recovery, it says that there is software not authorized by AT&T.
Hello, want to download this ROM, but I'm a bit confused because I always flash the new roms manually using a cwm recovery only. I'm not an expert in these tar md5 files.. Anyways im running a stock lollipop N9005XXUENC2 and my question is can I flash AryaMod using the cwm only and without downloading the 2 tar files the developer mentioned in the main thread? If not, can you tell me exactly what I should do using Odin? Thanks..
here you go!
MohamedBmb said:
Hello, want to download this ROM, but I'm a bit confused because I always flash the new roms manually using a cwm recovery only. I'm not an expert in these tar md5 files.. Anyways im running a stock lollipop N9005XXUENC2 and my question is can I flash AryaMod using the cwm only and without downloading the 2 tar files the developer mentioned in the main thread? If not, can you tell me exactly what I should do using Odin? Thanks..
Click to expand...
Click to collapse
the thing is,
1. Make all necessary backups, install ODIN and Samsung drivers in PC, also download the necessary files (BL, CP and ROM).
2. remove battery and insert after 10 secs.
3. Directly boot into Download Mode via key combo (after getting into Download Mode, Open ODIN and also connect phone to PC).
[download both files, select "BL tar file" in BL and "CP tar file" in CP in ODIN]
4. Flash the BL and CP from OP via ODIN (after selecting two files, click Start, it will automatically restart and it will show Success)
5. Now after the phone is ON (Success message), disconnect from PC and enter Recovery Mode and flash ROM.zip
6. Select your Options in Aroma and enjoy.
The Dev recommended to use TWRP and also I had TWRP from start. You can check in the ROM thread whether anyone is doing this via CWM.
Good luck.
I only have one file (AP_G900FXXU1POI1.tar.md5) . Back then, there were 2 files: bootloader to flash in BL and modem to flash in CP on odin.
SO how do I flash this only file? AP_G900FXXU1POI1.tar.md5
Thnks
Inaudax said:
I only have one file (AP_G900FXXU1POI1.tar.md5) . Back then, there were 2 files: bootloader to flash in BL and modem to flash in CP on odin.
SO how do I flash this only file? AP_G900FXXU1POI1.tar.md5
Thnks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2670326
http://forum.xda-developers.com/showpost.php?p=52210611
Couldn't find anyone else having posted this.
Here's a Google Drive link to the XEF MM firmware
G920FXXU3DPAD_G920FOXA3DPAE_G920FXXU3DPAD
thanks man, i am rooted and custom rom on 5.1.1 G920F (unlocked) and i don't live in europe,
can i flash this rom? or should i wait for UK or UAE for example??
will i be able to root it in the future?
and can you please give me a small tutorial on how to flash it?
im sorry for a lot of questions
esist said:
Couldn't find anyone else having posted this.
Here's a Google Drive link to the XEF MM firmware
G920FXXU3DPAD_G920FOXA3DPAE_G920FXXU3DPAD
Click to expand...
Click to collapse
Do you need to flash any bootloader or can you just flash it with odin
What is the build date?
the tech blog on insta said:
Do you need to flash any bootloader or can you just flash it with odin
Click to expand...
Click to collapse
You can flash with Odin.
Build date is 22 January
how to flash it man?
mzatari said:
how to flash it man?
Click to expand...
Click to collapse
1.Extract (unzip) the firmware file
2.Download Odin v3.10.7
3.Extract Odin ZIP file
4.Open Odin v3.10.7
5.Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6.Connect phone and wait until you get a blue sign in Odin
7.Add the firmware file to AP / PDA
8.Make sure re-partition is NOT ticked
9.Click the start button, sit back and wait few minutes
Is there a way to root this version?
Do you have the pit file to make the repartition with this firm?
Thanks a lot.
fifthelement said:
1.Extract (unzip) the firmware file
2.Download Odin v3.10.7
3.Extract Odin ZIP file
4.Open Odin v3.10.7
5.Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6.Connect phone and wait until you get a blue sign in Odin
7.Add the firmware file to AP / PDA
8.Make sure re-partition is NOT ticked
9.Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
Thanks man, without any modems or any additional files?
Im on rooted 5.1.1 G920F
erchewy said:
Do you have the pit file to make the repartition with this firm?
Thanks a lot.
Click to expand...
Click to collapse
I flashed this without flashing any pit on 5.1.1 XSG and it worked perfectly. I dont know why people flash pits !
erchewy said:
Do you have the pit file to make the repartition with this firm?
Thanks a lot.
Click to expand...
Click to collapse
I'd also like to know this. What PIT file should we use? It doesn't work for me without a PIT file atleast.
mzatari said:
Thanks man, without any modems or any additional files?
Im on rooted 5.1.1 G920F
Click to expand...
Click to collapse
Yes.
---------- Post added at 02:27 PM ---------- Previous post was at 02:27 PM ----------
Powerpuffman said:
I'd also like to know this. What PIT file should we use? It doesn't work for me without a PIT file atleast.
Click to expand...
Click to collapse
What error message do you get ? I flashed this without any pit from 5.1.1 stock XSG.
Is this operation wipe internal storage ? Thanks
fifthelement said:
1.Extract (unzip) the firmware file
2.Download Odin v3.10.7
3.Extract Odin ZIP file
4.Open Odin v3.10.7
5.Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6.Connect phone and wait until you get a blue sign in Odin
7.Add the firmware file to AP / PDA
8.Make sure re-partition is NOT ticked
9.Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
it gives me "fail" everytime
Worked first time Thanks.
fifthelement said:
1.Extract (unzip) the firmware file
2.Download Odin v3.10.7
3.Extract Odin ZIP file
4.Open Odin v3.10.7
5.Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6.Connect phone and wait until you get a blue sign in Odin
7.Add the firmware file to AP / PDA
8.Make sure re-partition is NOT ticked
9.Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
does that trigger knox? I am on DBT firmware ( German )
flex420 said:
does that trigger knox? I am on DBT firmware ( German )
Click to expand...
Click to collapse
No doesn't trip knox, as it is still official firmware. I just installed XEF in my PHN and have done this many times, as long as official, it will not trip knox.
Sent from my iPhone using Tapatalk
will this work on 920I?
Dancube said:
will this work on 920I?
Click to expand...
Click to collapse
No... we still have to wait.