Database Users

[Port] [Recovery] BLU DASH M 2 - CTR Carliv Touch Recovery 6.6.1 - Root not required

We have the first port and root for this highly unpopular BLU phone.
BLU DASH M 2 - Carliv Touch Recovery 6.6.1 aka CTR​I have managed to replace the stock recovery and still keep the stock system since there are no customs roms at the moment. The recovery doesn't require you to be rooted but rooting is possible after flashing or booting this rom. Don't fall for the fake Dash files on youtube, I have downloaded them all and they are copies of similar phones and don't work.. This one is ported over from the D070Q by Carliv.
It will not flash a full custom rom but will flash ZIPs so you can root, recover, flash partitions and hopefully pave the way for a TWRP . I do have a TWRP ported over to the BLU Dash M 2 but the touch doesn't work so you can't pass the first swipe screen.
DOWNLOAD from uploadfiles.io @ https://ufile.io/8oc6k​
Instructions
- Make sure to backup any important files, this will wipe your data pics, vids, etc..
- Enable OEM unlock under developer options and power down phone
- Boot to stock recovery by holding PWR + VOL UP
- In recovery choose "Reboot to Bootloader" ( aka fastboot )
- You should now be at a blank screen with Fastboot mode: at the bottom
Open your terminal and type the following code, obviously replacing your paths with the correct ones.
fasboot devices < --- will return a serial number or something to indicate connection is OK
fastboot oem unlock <--- will prompt your phone screen to accept unlock request, chose VOL Up to accept and make sure it says "Unlock pass" at the bottom
For testing only
fastboot -c "lge.kcal=0|0|0|x" boot CTR_6.6.1_BLU_DASH_M2_D090U.img
For permanent flash
fastboot flash recovery CTR_6.6.1_BLU_DASH_M2_D090U.img
Don't power down, instead boot in the same recovery
fastboot -c "lge.kcal=0|0|0|x" boot CTR_6.6.1_BLU_DASH_M2_D090U.img
Inside CTR select Wipe cache, Dalvik cache, Userdata / Data.
Select Reboot Phone from CTR menu and when asked to patch , Select " NO "
On first reboot it will reboot twice, then boot the stock system as if it was a factory reset.
This now paves the way for root with Magisk. See my post after this for rooting Blu Dash M2.
Enjoy !

RESERVED

Hey Thank you, got it working. Had to alter it a bit though. Had to select "Yes" for the fix as mine was restoring the old recovery.
Also when I followed your method, the system was not mounting the internal storage.
So I didn't wipe the data and used "Yes" when rebooting and the recovery is good.
I'll be looking out for the root constructions.
Great tutorial though.

73Hn said:
Hey Thank you, got it working. Had to alter it a bit though. Had to select "Yes" for the fix as mine was restoring the old recovery.
Also when I followed your method, the system was not mounting the internal storage.
So I didn't wipe the data and used "Yes" when rebooting and the recovery is good.
I'll be looking out for the root constructions.
Great tutorial though.
Click to expand...
Click to collapse
That will not work for root because Magisk needs the original boot rom. I'm sure it worked for you and that's a good start but wiping the partitions in order does work as well, I probably just left something out or got the order wrong. It's important we don't use CTR to patch because then Magisk complains about boot img being aleady patched and doesn't work.
Anyway you get the idea, it took me a few tries as well but in the end I managed to keep all 3 features intact, the stock rom + CTR + root. If you need to start again you don't need the full rom or sp flash, just flashing system.img to sytem partition works to restore everything.
I'm hoping to find the source code to the kernel and make a TWRP with touch working but the CTR is the only thing we have so far. It does flash zips just not full operating systems. It also flashes boot and recovery partitions.

Thanks, I can restore and try again. Do you have the tutorial for the magisk to root?

73Hn said:
Thanks, I can restore and try again. Do you have the tutorial for the magisk to root?
Click to expand...
Click to collapse
I think most can figure out Magisk from here, the real hurdle was the lack of a recovery because the stock rom doesn't allow Magisk to be flashed.

Thanks, I already started checking in on it... I'll update here once I get through.

How to Root Blu Dash M 2 with Magisk​
I have managed to root the stock system using Magisk. The stock recovery will not let you do this, as usual ignore the garbage on youtube and personal blogs, they're giving false info and fake files. This method works and I'm the first user who ported CTR 6.6 to allow for this.
DOWNLOAD Magisk from developer https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
FOLLOW THE ABOVE POST to replace stock recovery with CTR 6.6​
Instructions
- Follow first post to install CTR 6.6 recovery and reboot a couple of times to make sure it stuck.
- Enable OEM unlock under developer options and power down phone
- Boot to new CT 6.6 recovery by pressing PWR + VOL UP
- In recovery choose "Install Zip" and choose the "Magisk.zip" from your /SDCARD
Magisk installer will launch and if you did everything right, complete without errors.
- Select Reboot Phone from CTR menu and when asked to patch , Select " NO "
Phone should now reboot twice and have Magisk installed. I have verified root by deleting protected files like default.prop and gave Root Explorer permanent root access. If something doesn't work just find the right sequence. I believe it was flash system, flash recovery. wipe partitions. flash magisk
Enjoy !

The only thing left do now is find the Blu kernel source code for the M2 so a working TWRP can be compiled from scratch, then any MT6580 rom should be flashable.

Perfectly... Got it working using your same method after reinstalling the firmware... only difference was.
After installing recovery and booting into it, I then installed Magisk via adb sideload.
Confirmed root works.
Thank you very much for your patience and assistance

graciaaas

romish said:
How to Root Blu Dash M 2 with Magisk
I have managed to root the stock system using Magisk. The stock recovery will not let you do this, as usual ignore the garbage on youtube and personal blogs, they're giving false info and fake files. This method works and I'm the first user who ported CTR 6.6 to allow for this.
DOWNLOAD Magisk from developer https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
FOLLOW THE ABOVE POST to replace stock recovery with CTR 6.6
Instructions
- Follow first post to install CTR 6.6 recovery and reboot a couple of times to make sure it stuck.
- Enable OEM unlock under developer options and power down phone
- Boot to new CT 6.6 recovery by pressing PWR + VOL UP
- In recovery choose "Install Zip" and choose the "Magisk.zip" from your /SDCARD
Magisk installer will launch and if you did everything right, complete without errors.
- Select Reboot Phone from CTR menu and when asked to patch , Select " NO "
Phone should now reboot twice and have Magisk installed. I have verified root by deleting protected files like default.prop and gave Root Explorer permanent root access. If something doesn't work just find the right sequence. I believe it was flash system, flash recovery. wipe partitions. flash magisk
Enjoy !
Click to expand...
Click to collapse
Thank you very much! You do not know how much I needed to be root! I thought that this device was impossible to root. I really am very grateful. Friend was asking me if you could adapt the custom Slimrom rom for this device? because all the storage of this one takes the system, it would be of great help for all the users of this phone, I do not know if you can or are interested, but I thank you in advance

romish said:
We have the first port and root for this highly unpopular BLU phone.
DOWNLOAD from uploadfiles.io @ https://ufile.io/bj9kk​
Enjoy !​
Click to expand...
Click to collapse
Hi, can you provide a download link that doesn't require you to get a premium account to access the file. It's against XDA rules.​

kirito9 said:
Hi, can you provide a download link that doesn't require you to get a premium account to access the file. It's against XDA rules.
Click to expand...
Click to collapse
It is not premium, the file just expired so the site will keep it on line for a fee. I'll upload it again.

romish said:
It is not premium, the file just expired so the site will keep it on line for a fee. I'll upload it again.
Click to expand...
Click to collapse
Try this one.. if the host tries to replace it with the original let us know and one of the others who have the file will re upload it to another host. I don't feel like signing up anywhere so that is why I use this host.
https://ufile.io/8oc6k
https://ufile.io/8oc6k
https://ufile.io/8oc6k

kevoncrush said:
Thank you very much! You do not know how much I needed to be root! I thought that this device was impossible to root. I really am very grateful. Friend was asking me if you could adapt the custom Slimrom rom for this device? because all the storage of this one takes the system, it would be of great help for all the users of this phone, I do not know if you can or are interested, but I thank you in advance
Click to expand...
Click to collapse
All 'ya 'all are welcome . Unfortunately I can't go any further because there is no source for the kernel so TWRP won't work because there is no touch to get past the first screen. Otherwise if it. did slim rom would flash without any problems, its just these older recoveries don't support a few things that TWRP has to make flashing full roms successful. If someone has source files for the BLU Dash M2 let me know.
I'll just let you guys know, I managed to make a pretty good custom rom with root only by deleteing everything but the core OS. I don't recommend this for everyone but I did get rid of just about everything and made this 6.0 more like 4.4 .. I got it to the point where even the phone and SMS didn't work and the google framework was deleted, then slowly began adding my approved versions of apps. Now its totally de googled but again I realize this isn't for everyone. I just wanted a small rom with camera ad GPS and those are working fine for me.

Custom recovery link taken down again
Could someone please upload the custom recovery again?

[Port] [Recovery] BLU DASH M 2
I tried to fast boot as peryour instructions but I get the error: cannot load ' ctr_6.6.1 etc. :crying:

Please try this link, if you have a better locarion to store it please do so and reshare as this link is only valid for 2 days.
ctr_6.6.1_blu_dash_m2_d090u.img
---------- Post added at 05:08 AM ---------- Previous post was at 05:01 AM ----------
If that recovery does not work, try this one. I have two of different sizes and can't remember which one i used.
recovery.img

Download link
Please repost the download link

Help with soft brick

Hi guys,
I got the ASUS Zenfone 3 Zoom and started playing with it. Unfortunately I managed to soft brick it and somehow I can't go back to stock. Here are all the things I did. I would be happy to get any ideas what to try next:
1. unlocked the bootloader - using asus's official unlock tool
2. flashed twrp recovery - twrp-3.2.1-0-Z01H-20180304.img, using:
adb reboot bootloader
fastboot flash recovery twrp.img
3. updated asus's firmware to the latest official one:
copying UL-Z01H-WW-71.60.139.30.zip onto internal memory
android detects the update and applying it using android
4. Enabling lock pattern at boot (from android settings). Correct pattern required even when booting into recovery
5. Installing supersu via twrp:
adb reboot recovery
installing supersu
wiping caches (the cache partition cannot be wiped)
6. SuperSu working (tested via android)
7. Reading about Magisk. Trying to install magisk via twrp. Magisk's installer complained that the system is not vanilla (due to SuperSu modifications). Have to uninstall SuperSu to return to previous state.
8. Tried uninstalling SuperSu from the program itself (in android). The uninstaller got stuck. The phone become unresponsive and had to reboot.
9. Found a script packaged as an executable zip (to be installed via twrp) that will uninstall SuperSu and return system to pristine state (SuperSu makes a backup of the files it changes before installation) - UPDATE-unSU-signed.zip. Uninstallation worked.
10. Magisk installation still complained about the bootloader. Then things started to go wrong. I unpacked the latest firware UL-Z01H-WW-71.60.139.30.zip, took out boot.img and tried to flash just the bootloader
fastboot flash boot boot.img
11. Upon reboot the phone got stuck at the ASUS logo. Reboot into recovery and into fastboot still works (soft brick). Still shows unlock pattern at boot.
12. I tried flashing the original firmware using TWRP (install a zip). However the installation threw some errors. Unsuccessful.
13. I've tried flashing the system.img from the original firware using fastboot but still it's stuck at the ASUS logo at boot.
fastboot flash system system.img
Here I am stuck. I've read that TWRP cannot install properly the ASUS official firmware but if you flash the original recovery, it can probably flash it properly. Another thing that I think might explain why I cannot get out of the soft brick is that I've enabled the lock pattern at boot, which effectively encrypted some parts of the phone and I have a strong feeling this interferes with the boot process. I will look for a script/installable zip (via twrp) that can remove the lock.
I really need ideas/suggestions before I make something that will turn my phone into a hard brick. Thanks.

What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you

Thanks
+)KEV1N(+ said:
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Click to expand...
Click to collapse
Thanks,
I tried to find a stock recovery images but unsuccessful. Can you tell me where to get it from?

Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck

+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
-- [link] removed due to XDA regulations
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).

mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.

mollonado said:
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
Click to expand...
Click to collapse
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
It came preloaded with Nougat? Interesting.

+)KEV1N(+ said:
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
It came preloaded with Nougat? Interesting.
Click to expand...
Click to collapse
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?

mollonado said:
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
Click to expand...
Click to collapse
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.

+)KEV1N(+ said:
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
Click to expand...
Click to collapse
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.

mollonado said:
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
Click to expand...
Click to collapse
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?

mollonado said:
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
Click to expand...
Click to collapse
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.

+)KEV1N(+ said:
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
Click to expand...
Click to collapse
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,

mollonado said:
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
Click to expand...
Click to collapse
First off, my apologies for this late reply (Been superbusy with school and internship assignments)
Secondly, and that is why I only use magisk. Because once you mess with the host file, depending on what module you install, it can range from tripping safetynet to bootlooping.
So quick question, is it still in this state right now since 9 days ago?
Greetings,
Kevin

+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
I made a mistake and could not install recovery stock, I followed what you wrote in the beginning install MM recovery and so I did a hard reset and I was able to install the most current recovery stock and installed ROM Oreo, Thanks. Sorry, I'm on google translator.

Unable to root Redmi 7A - with MIUI 11.0.6

Got a second Redmi 7A, I'm 99.99% certain it came with *global* 10.2.5 PCMMIXM (it was what ordered, and saw it too, pretty certain), decided to let it upgrade OTA, it picked 11.0.6 OTA, and it came to:
MIUI Global 11.0.6 PCMEUXM (notice the EU there), which, I'm assuming from this url: https://mirom.ezbox.idv.tw/en/phone/pine/
to be this one:
Code:
Redmi 7A – EEA Stable ROM
Lstest V11.0.6.0.PCMEUXM(History)
MIUI 11
Android 9.0
Update at 2019-10-31 19:05:57
Changelog Expand Official Link
Recovery miui_PINEEEAGlobal_V11.0.6.0.PCMEUXM_bcc90ca1df_9.0.zip
Filesize 1.5G
MD5 bcc90ca1df89a4f3d8cc7b9705a70d83
which is a bit confusing, it says Global, but has "EU" in the name.. in any event, flashed TWRP as per:
https://xiaomifirmware.com/guides-and-tips/how-to-install-twrp-and-magisk-root-on-redmi-7a/
choose the LRTeam version:
Code:
2a3296af05267160cba2891bff446203 TWRP-3.3.1-1003-REDMI7A-CN-wzsx150.img
seemed newest, all is great, it boots into TWRP recovery.. Next, trying to get Magisk on it, got the manager apk installed 7.4 all fine, it says 20.1 needs to be installed so...
unzipped the boot.img from above zip file, it has this md5, this is original , unmodified boot.img:
Code:
036d1b6c5a99e9417f8d3e98d5718368 boot_Global_V1106PCMEUXM.img
following this guide: https://romprovider.com/2019/01/create-pre-rooted-patched-boot-img-magisk/
Magisk successfully patched the boot.img on the same phone (running 11.0.6) and got this file:
Code:
dad219422c9302a460d4d2370adafb4f magisk_patched_Global_V1106PCMEUXM.img
transferred to PC, attempted to flash:
Code:
c:\XiaomiADB\bin>fastboot flash boot magisk_patched_Global_V1106PCMEUXM.img
target reported max download size of 535822336 bytes
sending 'boot' (14914 KB)...
OKAY [ 0.470s]
writing 'boot'...
OKAY [ 0.190s]
finished. total time: 0.665s
c:\XiaomiADB\bin>fastboot reboot
rebooting...
finished. total time: 0.003s
Phone boots fine, however, magisk still says it needs to be installed...
in developer's options, the USB debugging is enabled, and boot loader is definitely unlocked, it says on splash screen and the OEM Unlocking is greyed out and says "bootloader already unlocked".
Also, attempted to flash boot image from within TWRP, selecting the above boot.img file and selecting the boot partition, flashes OK, however, after normal reboot, as if nothing happened, phone boots, but magisk is NOT installed (no root).
Is there anything missing in these steps? does anyone have a correctly patched 11.0.6 image with magisk in it from an 7A phone?
Only thing that appears as an "error" are these family of cmds to unlock boot loader:
Code:
fastboot oem unlock
...
FAILED (remote: Token verification failed, reboot the device)
finished. total time: 0.004s
however, i think that is normal/expected, since the bootloader is already unlocked.. able to flash twrp, etc.
Thanks so much for any ideas...
Stormy.

Forgot to mention that attempted to install Magisk 20.1 zip file downloaded by the app, from within TWRP, attached screenshot of how that looks like all seems okay but after reboot it still says that magisk needs to be installed... Very strange..
Appreciate any thoughts..
Stormy

noticed in above screenshot that it detected a patched boot image so decided to try installing the
v20.1 Magiskk zip file with the stock Boot, the install results in a screenshot, after reboot it still says that magisk has to be installed.!
also attaching screenshots showing the device is unlocked as well as USB debugging and OEM unlocking are all there.
Should this be posted in The magisk forum or is this something specific to the 7A? Or my steps?
How to debug further?

Attempted with the other TWRP image TWRP_v3.3.1-1_all.img, same results also reinstall the magisk manager 7.4 and same results....hmm.. maybe the OTA update took wrong ROM version. (EU and not pure Global)?...

Digging a bit more, found this pretty cool tool: https://www.xiaomitool.com/V2/latest called: "XiaoMiTool V2 ", which basically automated (almost) Everything !! Tried to do TWRP, as well as Magisk, it too followed similar steps I did, all automatically, rebooting, patching, etc. but outcome is still same, when phone boots normally, Magisk Manager says that Magisk 20.1 needs to be installed...
Then tried to flush miui_PINEGlobal_V11.0.4.0.PCMMIXM_674ed79f0b_9.0.zip using that tool, it said all is OK, phone rebooted , wiped all, but it still runs the EU version for some reason.. Now trying to find the path to "downgrade" from 11.0.6 to 11.0.4, or switch from EU to Global.. maybe that's the source of all issues, not sure what else to try

Reporting progress, to keep track of what was attempted. So, decided to WIPE all and start with 11.0.4 Global fresh, from TWRP, wiped everything, to the point it said "no OS installed, are you sure u want to reboot" it rebooted into fastboot, then downloaded the 11.0.4 Global .tgz and flashed, phone booted OK this time into 11.0.4 Flashed TWRP, and then attempted to flash Magisk via both routes, one by patching the boot.img from the .tgz and flashing, all using the Phone (to avoid any PC/driver/adb issues). The flashing worked fine, but upon reboot, Magisk Manager claimed that Magisk is not installed. Second try was to flash the stock boot.img, then flash magisk zip file, did that for v20.1, v19.4 and 19.3, each time from stock boot.img, and reboots to test, none of them showed that magisk is installed...
all this time, usb debugging is enabled despite most work done on the actual redmi 7A phone itself.
Then uninstalled magisk manager 7.4, and tried with 7.2, but that doesn't change much since any action there wants to update to v7.4..
next step will wipe again, and go for the Global 10.2.5... if that doesn't work then I really don't know what can be going on...
If anyone does have a 7A with MIUI 11 with a properly patched boot.img, would love to try it... all my patching attempted booted fine, but none showed that Magisk is installed... finding it hard to think it's a magisk bug, more likely some MIUI 11, lets see how 10 works out...
Stormy

OK, some success! so, wiped ALL again, to the point of no-OS installed; phone only boots into fastboot (brick), using flash_all.sh from 10.2.5 fastboot Global ROM flashed entire phone and it booted OK.
btw, not easy to find 10.2.5 now, as places already updated links to 11.0.x..
Once in 10.2.5, tried to patch Magisk in all possible ways (twrp or patching boot.img on phone the flashing from Windows10/PC) as also described in this thread few weeks ago:
https://forum.xda-developers.com/showpost.php?p=80498891&postcount=179
but it did NOT work, well, the procedure appeared OK, no errors and when booting, it says magisk needs to be installed.
The only thing that works is the provided boot global .img file [size 14.5 MB (15,269,888 bytes)], as soon as this one is flashed, via phone/twrp or PC, then the magisk is correctly detected.
Very mysterious, why only that boot.img is working on my 7A phones.. maybe there's an additional step, to "sign" or fix the boot.img before it can be flashed?
now took a full TWRP backup, and will try to move to 11.0.4 see if magisk is retained, and if not, if possible to re-gain it.. if not, then, will restore from TWRP backup.
Any thoughts welcomed..
Stormy.

Did not manage to get it working with MIUI 11 yet, so backed to MIUI 10.2.5.. all is fine there.
Noticed that TWRP did not "stick", flash but after normal boot, it came back to original recovery. I think this is b/c of Verify Boot in android Pie/9.. so I *think* what helped here is to flash a vbmeta.img from first post of this thread:
https://forum.xda-developers.com/redmi-7a/how-to/custom-gsi-firmware-t3965820
Even after flashing this, and even in 10.2.5, patching the STOCK 10.2.5 from the phone using Magisk 20.1 and installing using TWRP did not work, not sure if this is a bug in magisk or what, but only way to get root was using the provided boot.img as described above. I'll keep using 10.2.5 for now. feel free to add any ideas here , maybe one day will get more time and a spare phone to try MIUI 11
Stormy.

hey , I have the same problem. I noticed you mentioned 'sign', what should I sign what things? and how to sign?

I was going to ask for the same thing : is there any method to root Redmi 7A under MIUI 11?
For my case :
-I can flash and boot to TWRP,
-I can 'flash' (install) Magisk through TWRP,
-However : this has no effect. Still Magisk Manager tells me that Magisk was not found!
The Redmi is unlocked and I can install custom roms (Mokee, LineageOS...). I see no reason why the phone can't be rooted it's probably just some bad configuration.
Thank you very much

depaul9999 said:
I was going to ask for the same thing : is there any method to root Redmi 7A under MIUI 11?
For my case :
-I can flash and boot to TWRP,
-I can 'flash' (install) Magisk through TWRP,
-However : this has no effect. Still Magisk Manager tells me that Magisk was not found!
The Redmi is unlocked and I can install custom roms (Mokee, LineageOS...). I see no reason why the phone can't be rooted it's probably just some bad configuration.
Thank you very much
Click to expand...
Click to collapse
Don't bother rooting Redmi 7A, it just isn't possible, not even with the miui 10 (I've tried). There's no way to flash magisk successfuly, because when you do, magisk is still uninstalled, therefore no root and if you try SU instead, it happens some kind of error. If you try magisk without TWRP and flash a patched recovery it still doesn't work either. Since I can only follow tutorials because I understand nothing about Android I can say that there is no tutorial out there that works and all of them are wrong. I just don't understand why people bother to make tutorials that do not work just to make people waste their time.

KnowTheyself said:
Don't bother rooting Redmi 7A, it just isn't possible.
Click to expand...
Click to collapse
Thanks indeed that's the case for the moment. Hopefully we could soon manage to root the phone successfully.
My biggest motive is to install App2SD and move games to external storage, since with my 16GB version I can barely install one or two games and MIUI only allows installation to internal. (I know I should've bought a phone with bigger storage).

depaul9999 said:
Thanks indeed that's the case for the moment. Hopefully we could soon manage to root the phone successfully.
My biggest motive is to install App2SD and move games to external storage, since with my 16GB version I can barely install one or two games and MIUI only allows installation to internal. (I know I should've bought a phone with bigger storage).
Click to expand...
Click to collapse
I've read that the 16GB version of the Redmi 7A is possible to put a micro SD card and format it as internal storage and that was the reason I've bought it, although I'm not yet sure because I'm waiting to buy a microSD card, it's still on the way.
I want to root it because of privacy reasons and that's the only reason. For now I'm using a VPN to block 99% of the google and xiaomi apps, etc. to the internet this way I got some privacy. I have unlocked the phone too so I did uninstalled several apps from the system using the PC.

KnowTheyself said:
Don't bother rooting Redmi 7A, it just isn't possible, not even with the miui 10 (I've tried). There's no way to flash magisk successfuly, because when you do, magisk is still uninstalled, therefore no root and if you try SU instead, it happens some kind of error. If you try magisk without TWRP and flash a patched recovery it still doesn't work either. Since I can only follow tutorials because I understand nothing about Android I can say that there is no tutorial out there that works and all of them are wrong. I just don't understand why people bother to make tutorials that do not work just to make people waste their time.
Click to expand...
Click to collapse
I don't think that's correct.. I've rooted several 7A, as many others on the forum, just look around, all these posts, many HAVE done based on the topics...
There are few more mysteries, even to experts, so don't feel bad (like how to path boot.img from Magisk, did it for other phones, but not possible for this one for some reason).. agree, there is no current/updated guide that works for everyone, but one can piece things together..
The reason there is no complete guide is not b/c people want to waste your time, they are really trying to SAVE time, however, there are many FACTORS at play, like initial ROM/state of the phone, some Global, some EU, some 10.x other 11.x and so forth, which change over time...
Once the bootloader is unlocked, then one should be able to:
- flash vbmeta.img
- flash twrp (I'm using 3.3.1-1003 'wzsx150').
boot into twrp and flash a properly patched boot.img (that matches your phone), now that's the tricky part, b/c one cannot be re-generated, u'd have to dig through some of the posts, like this: https://forum.xda-developers.com/redmi-7a/how-to/custom-gsi-firmware-t3965820 and find the boot.img that works, it had magisk 19.3 in it, but then update is easily possible.
it's important to flash vbmeta otherwise the "verified boot" will revert things back to a "working state", and you'll lose twrp..
Once my phone got to MIUI 11 it was not possible to root (since there is no boot.img that's patches correctly, and i couldn't do it), so i've flashed the whole phone back to 10.2.5 and from there rooting was pretty easy, the trick is to find the right boot.img.
Good luck.

stormy1777 said:
I don't think that's correct.. I've rooted several 7A, as many others on the forum, just look around, all these posts, many HAVE done based on the topics...
There are few more mysteries, even to experts, so don't feel bad (like how to path boot.img from Magisk, did it for other phones, but not possible for this one for some reason).. agree, there is no current/updated guide that works for everyone, but one can piece things together..
The reason there is no complete guide is not b/c people want to waste your time, they are really trying to SAVE time, however, there are many FACTORS at play, like initial ROM/state of the phone, some Global, some EU, some 10.x other 11.x and so forth, which change over time...
Once the bootloader is unlocked, then one should be able to:
- flash vbmeta.img
- flash twrp (I'm using 3.3.1-1003 'wzsx150').
boot into twrp and flash a properly patched boot.img (that matches your phone), now that's the tricky part, b/c one cannot be re-generated, u'd have to dig through some of the posts, like this: https://forum.xda-developers.com/redmi-7a/how-to/custom-gsi-firmware-t3965820 and find the boot.img that works, it had magisk 19.3 in it, but then update is easily possible.
it's important to flash vbmeta otherwise the "verified boot" will revert things back to a "working state", and you'll lose twrp..
Once my phone got to MIUI 11 it was not possible to root (since there is no boot.img that's patches correctly, and i couldn't do it), so i've flashed the whole phone back to 10.2.5 and from there rooting was pretty easy, the trick is to find the right boot.img.
Good luck.
Click to expand...
Click to collapse
Well, if you say so... If you're right then I got the wrong Redmi 7A model. It came with the EU version of the miui.
I already knew the tutorial in the link you gave, but that seems very complicated and I do not really know what's going on there so it's better I do not try it. And if I followed that tutorial I would have to flash the phone again with the miui 10, because I have the 11 now. I already wasted many hours trying to root the phone and I had to flash the rom about 4 times because the phone became bricked. Anyway the tutorials I've followed were not the one in the link above and all the other ones I've tried did not work and yet they claim it does, specially using magisk only, without TWRP.
I'll wait for an easier method than the one you shared, if that will ever happen. For now I just use a VPN, it's the closest thing to root I have found, to deny system and apps permission to the internet.
Thank you

In case you're not aware, there are scripts to flash the entire phone automatically, I've done that 10's of times BEFORE putting the phone into "production" use, root was a _must-have_,phone's now heavily used, so can't toy with it much, unless forced to (see below), i may get another phone to play with, but not much TIME to justify it...
Was getting tired of typing:
Code:
:/ # pm list packages|grep xyz
followed by:
:/ # pm uninstall -k --user 0 com.google.android.apps.tachyon
Success
Decided to give some "highly-rated" app a try, it claims to be able to remove system apps: "System app remover (root needed)":
https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp&hl=en_US
Took a full TWRP backup, installed, all seems great.. remove, goes to recycle bin, ok.. now, lets REBOOT..
Opps.. phones goes into FASTBOOT... OK!! that's what the backup is for.. go into TWRP, flush SYSTEM, CACHE, DATA, reboot, again, we're in Fastboot, and this time no RECOVERY boot is possible, just goes into FASTBOOT directly.. much like i've described in this thread:
https://forum.xda-developers.com/showpost.php?p=80509823&postcount=111
so, TWRP on phone doesn't help much, took the TWRP backup from SD Card to PC (since phone can only do fastboot at this point), thought it would be easy/possible to fastboot flash all the TWRP into the phone from PC, however, that is NOT simple, since TWRP breaks files, one must concatenate them before flashing..
I was not in the mood, nor did i think a huge change took place, it was just something silly that app did. hmm.. here, i can't exactly explain what took place, but a sequence of flashing of boot.img recovery.img and vbmeta.img all from STOCK and the TWRP backup, was "all it took" to recover the phone fully..
After about 30+ flashes and reboots it came to life much like the last boot, went into that APP again, tried to RESTORE the apps, it failed, and a reboot again, went into FASTBOOT! twrp was there, again, tried recovery, this time only SYSTEM, again, phone lost recovery, and went into, fastboot only... and.. again, sequence of flashing from fastboot, i can tell that vbmeta (Verify Boot) takes a *major* role in this version/device, if something is not right, it just reverts things or decides to go into fastboot.
I saw it work once, so was not going to give up and wipe/start fresh.. kept trying..
I think the app somehow made "direct" modifications to the system partition without proper interface, and thus ruined the "signature" or encryption, otherwise not sure how it could trash the phone so badly..
in any event, after long struggles, flashing the LATEST did _not_ work, it's almost as if the phone had to be taken back to original setting, let it boot into recovery, then reboot again, and flash things in steps, not all at once, at least based on this experience. I know it's silly, b/c in Android 6 I've restored/cloned phones all the time using TWRP directly from phone.. not sure, it does not work on my 7A's...
eventually, phone booted, with 10.2.5 magisk/boot.img (no root, since it did not recognize magisk), then fastboot flashed the canary boot.img, and got root.
anyways, point is, it was pretty ugly, and I'm not complaining, just saying this is pretty complicated stuff, it's a miracle that this even works
keep up the great work everyone, if i can help in any way, let me know...
All this is on Global phone, I don't have an EU/ROM/phone, so can't help u directly, but someone may have a root boot.img EU boot, that's really the key, and the vbmeta.img of course as for MIUI11? so what if that's what you have, it can be flashed, it's a matter of choice, flash to miui 10.2.5 and get root, or try to do it on MIUI11, or, let it be and use w/o root.. which was not an option for me
good luck.
Stormy.

btw, the magisk/patching boot.img did not work for me, and was reported in that same thread:
https://forum.xda-developers.com/showpost.php?p=80560039&postcount=206
MDV106 said that both EU and global boot.img were posted in that thread, and i agree i used one of them, not sure exactly which, but definitely it was the Global, not the EU. and i think it's not goot to mix up.. if u have an EU, stick with it, it might impact Wifi or similar "regional" things..

Same problem, but it works on mokee
Add-on-su on mokee open source ROM works fine, can enable root from developer options only, magisk and supersu don't work.
I have been trying to make them work but it seems impossible, I have looked in system/xbin and found no su files, maybe the problem is in the meta-INF because it doesn't properly know where to install it.

boody shaban said:
Add-on-su on mokee open source ROM works fine, can enable root from developer options only, magisk and supersu don't work.
I have been trying to make them work but it seems impossible, I have looked in system/xbin and found no su files, maybe the problem is in the meta-INF because it doesn't properly know where to install it.
Click to expand...
Click to collapse
Thanks for this data point, yeah, root was/is also possible with MIUI 10.2.5, I'm sure other ROMs can root pretty easily.. the "goal" of this thread is to somehow figure how to do it on MIUI 11 so we can take the security updates and still retain rootness

working root redmi 7a
Working root for Redmi 7a
thank you stormy1777 - it is your tutorial, I only put it together. It is the only tutorial that works
links unavailable due to site rules:
google for: ROM v10.2.5. global V10.2.5.0.PCMMIXM/pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global_efb78ff9c3.tgz
google for: patched boot v10.2.5. under: xiaomifirmware (dot) com how-to-install-twrp-and-magisk-root-on-redmi-7a
google for: TWRP: under: androidweblog(dot)com xiaomi-redmi-7a-root-install-twrp-recovery I took the version 3.3.1.-0
google for Magisk: Magisk-v20.1.zip
Install in fastboot mode and with Mi Flash Tool
flash: pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global
option: clean all
wait until the mobile phone is fully installed (will reboot automatically)
copy Magisk into the root directory on your phone
restart in fastboot mode (volume down + power button)
on PC:
rename twrp file to recovery.img
rename boot file to boot.img
copy boot.img and recovery.img on the PC in the directory, where adb drivers are
open power shell on the PC in the directory, where adb drivers are
type in the power shell window:
fastboot flash recovery recovery.img
Enter
then type in the power shell window
fastboot flash boot boot.img
Enter
then hold volume up + power button until it 2x starts and vibrates, then wait, it opens in TWRP
type install, find Magisk.zip in the phone root directory a flash
restart into system
done

Spent 6+ Hours Trying To Get Rooted Android 10

I tried rooting my OP6T on Android 10, and was up half the night. Recovered from a hard brick twice, using the Qualcomm serial flash tool thing. I was trying to flash Majisk, and read that it had to be done via a custom recovery like TWRP. All the guides said that it to boot TWRP, then basically flash TWRP using itself so that it says. Fastboot kept saying "Remote Unknown Command" when using "fastboot boot" like all the guides said. Then someone told me to run "fastboot flash boot twrp.img". This caused the first hard brick. I guess because I wrote the recovery over the boot partition. I then found a post somewhere where someone said that Oneplus Devs removed the boot command from Fastboot for some reason. No idea why!! But no one else in the OP6T TWRP thread reported issues. Maybe they were all installing TWRP on an Android 9.x build that diden't have this issue? Eventually after recovering and flashing several layers on OTA updates through the local upgrade option, I was back on A10 OB2. But I still wanted root and hadn't got TWRP working yet. Then I found a random post buried in a random thread somewhere saying that custom recoveries on A10 are useless at this point period because TWRP can't flash the system partition, as it's read only. Not sure if this only applies to OP devices?
I am now back to where I started. I would still like twrp for backups, but since it's not cooperating, I try the alternative option for Masisk, involving the patched boot.img file. I download the patched the patched boot file in this thread. Flashed it with "fastboot flash boot boot.img", and got my 2nd hard brick. It would get stuck at the bootloader warning screen and no fastboot.
Now i've lost my data, 6+ hour of time, and no closer than I was before.
I am going to take a break now, cause I need an operational phone this week. Word of advice: If you're not a developer that knows exactly what they are doing, don't even attempt to get root on an Android 10 build!

You can install Magisk,manager,extract the boot img from the OOS zip file using payload_dumper,copy that boot img. to your phone,patch the image with magisk,copy to your PC then fastboot the patched image to your phone .And yes,you cannot have twrp yet.

I'm on the open beta 2 of Android 10 and I have root and TWRP. It's possible.

It's not that hard, you don't even need twrp to install magisk. in android 10.
download open beta 2 Android 10. Extract payload.bin from it. Use payload_dumper to extract boot
install magisk apk, and patch boot.
go to fastboot use the
"Fastboot flash boot_a patched_boot.img "
and you are done.

Sh4d0wk1ng said:
It's not that hard, you don't even need twrp to install magisk. in android 10.
download open beta 2 Android 10. Extract payload.bin from it. Use payload_dumper to extract boot
install magisk apk, and patch boot.
go to fastboot use the
"Fastboot flash boot_a patched_boot.img "
and you are done.
Click to expand...
Click to collapse
I think I see what I did! I need to use "fastboot flash boot_a" (or b), and not just "fastboot flash boot". Not sure how you know whether to use a or b without a custom recovery though? Because AFAIK, the fastboot command for that is broken.
Not sure what payload dumper is, but I should be able to use the the same patched boot image that everyone else used since it's for that same ROM, now that I known exactly where to flash it to (besides A or B).
When I flashed to "boot" before, I must have overwritten some kind of low-level pre-bootloader, lol.
Thank you
Bhamilton0347 said:
I'm on the open beta 2 of Android 10 and I have root and TWRP. It's possible.
Click to expand...
Click to collapse
How did you achieve this? Do you have to start with A9 with TWRP, and then somehow upgrade to A10 without overwriting it with stock recovery?
I found this guide, but step 2 does not make sense to me. How could you flash TWRP inside of the Masisk Manager app?
I imagine you still can't flash system with TWRP, but everything else works?
Thank you
roman gabriel said:
You can install Magisk,manager,extract the boot img from the OOS zip file using payload_dumper,copy that boot img. to your phone,patch the image with magisk,copy to your PC then fastboot the patched image to your phone .And yes,you cannot have twrp yet.
Click to expand...
Click to collapse
I think the issue was that I flashed to the wrong place. See above. Thank you.

I'm feeling extremely lazy rn and I don't feel like explaining all of the trouble I went through to get it working, but you should be able to just fastboot flash these images to their respective partitions and you should have both TWRP and Magisk. It's got Magisk 20.1, the modified one so that EdXposed will work. But they're functionally the same.
https://drive.google.com/file/d/149TqVLqKr7Rc8xygMDoUyY_SLoATQrRq/view?usp=drivesdk
Let me know if it works.
Note: this is the boot.img for the second open beta of Android 10 for the OnePlus 6T. This may also work on the stable and first beta release as well as even on the 6, but I do not know. Also, your SIM card may not be showing up, but this problem disappeared for me a minute or two after boot.

Bhamilton0347 said:
I'm feeling extremely lazy rn and I don't feel like explaining all of the trouble I went through to get it working, but you should be able to just fastboot flash these images to their respective partitions and you should have both TWRP and Magisk. It's got Magisk 20.1, the modified one so that EdXposed will work. But they're functionally the same.
https://drive.google.com/file/d/149TqVLqKr7Rc8xygMDoUyY_SLoATQrRq/view?usp=drivesdk
Let me know if it works.
Note: this is the boot.img for the second open beta of Android 10 for the OnePlus 6T. This may also work on the stable and first beta release as well as even on the 6, but I do not know. Also, your SIM card may not be showing up, but this problem disappeared for me a minute or two after boot.
Click to expand...
Click to collapse
Thank you. I can't risk it right now. But i'll try sometime. Anyone wanna be the guinea pig?
If it works well, it should be very useful to the community.
I am brand new to Majisk by the way. It's been a couple years since I was rooted.

flyoffacliff said:
Thank you. I can't risk it right now. But i'll try sometime. Anyone wanna be the guinea pig?
If it works well, it should be very useful to the community.
I am brand new to Majisk by the way. It's been a couple years since I was rooted.
Click to expand...
Click to collapse
It's 100% safe and I can guarantee it'll boot as long as you're on an international OP6T on the Android 10 open beta 2. I reuploaded and included the stock boot.img as well so just in case you do have any problems, you can just fastboot flash it and you'll be able to boot right up (no hard brick or anything)

Bhamilton0347 said:
It's 100% safe and I can guarantee it'll boot as long as you're on an international OP6T on the Android 10 open beta 2. I reuploaded and included the stock boot.img as well so just in case you do have any problems, you can just fastboot flash it and you'll be able to boot right up (no hard brick or anything)
Click to expand...
Click to collapse
Great. Thank you. I might wait for the next stable build though. It just came out on H2OS, so shouldn't be too long now.

Man it just worked smooth for me. I was already on OB2 and I followed this below link. Half way down, I realised it was for OP6 and not 6T. However I had proper twrp and I just followed the procedure.
https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213
EDIT: I faced problems with wifi connectivity. So I had rebooted to TWRP and reflashed OB2, TWRP and Magisk again to get it working. An issue with
"fastboot flash boot" command I guess.

flyoffacliff said:
I think I see what I did! I need to use "fastboot flash boot_a" (or b), and not just "fastboot flash boot". Not sure how you know whether to use a or b without a custom recovery though? Because AFAIK, the fastboot command for that is broken.
Not sure what payload dumper is, but I should be able to use the the same patched boot image that everyone else used since it's for that same ROM, now that I known exactly where to flash it to (besides A or B).
When I flashed to "boot" before, I must have overwritten some kind of low-level pre-bootloader, lol.
Thank you
I wasn't sure either but I know that the boot on the oneplus 6t android 10 it has two partitions. I just flashed it on boot_a and it works. I could attempt to install twrp on the other partition but I don't really needed it. good luck and let us know how it went.
Click to expand...
Click to collapse

I had a bit more luck with the adventure this time! Successfully flashed TWRP and Magisk, but then Emojis were completely broken at the OS level. Apparently this is caused by a partition issue, but not sure how this happened. I tried a script to fix it that someone posted and it did not work. So I took this as an opportunity to flash the latest ROM to fix it.
I went into TWRP, ran the full update ZIP, then the TWRP installer, then the Magisk installer (all without rebooting). Apparently it does not switch slots automatically when you run it from recovery instead of the "local update" option? TWRP was fine after the update, but Masisk was not, despite me flashing the ZIP. No idea why! But I switched back to the other slot that was still rooted, used Magisk Manager to flash it to inactive slot, and switched slot back to one with new OS. Success! Funny how different methods work/fail with different people. Thanks for the help everyone. I just noticed 10.3.1 is no longer posted on the OnePlus website download page, hope it didn't get pulled again!
EDIT: Does each slot just have its own system and cache partition? Everything else is like data and modem is combined, right?

https://forum.xda-developers.com/oneplus-6t/how-to/root-oneplus-6t-loosing-data-android-10-t4041865
follow this guide.. work 100%. Tested.

I keep loosing root after reboot, Pls help.

Hey guys,
first time posting here so i dont kow how to style the text, so sorry about that.
last time i rooted a phone was on my sony xperia sp , where all i had to do was to go to towelroot .com and click to root.
I tryed to root my OP6T yesterday, after some setbacks i managed to sucessfully do it.
I did it like this:
1. Downloaded full ROM of OOS 10.3.2,
2. copied the payload to a program called payload dumper that extracted the boot image.
3. Copied the boot image to the phone
4. opened Magisk manager and selected install from source where i chose the boot.img
5. it created a copy called magisk_patched.img
6. booted in fastboot
7. on my pc used the command prompt to "fastboot boot magisk_patched.img"
booted normally and i had root.
but then problem appeared
#Problem 1
everytime i rebooted my phone i would loose root and it would say Magisk not installed. To get it back i would need to perform step 7 again and it was not ideal to do that everytime i turned off my phone.
#Problem 2
While tryng to solve problem 1 i read that i needed to open magisk manager and "Install to Inactive Slot (After OTA)."
After doing that it rebooted but now it wont boot at all, even if i try to "fastboot boot magisk_patched.img" the cmd gives me error:
fastboot boot magisk_patched.img
downloading 'boot.img'...
OKAY [ 0.838s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.845s
now my phone is just sitting there i dont want to reset it again. it would be the 4th time that i need to set up my phone in 2 days, so im trying to see if there are alternatives.
If reset is really the only way, i read that with root you can make a full backup of your phone and then restore it. How to do that? can i do it in the situation im in?
How can i root my OP6T running OOS10.3.2, and keep it? Whats the right method bc the one i followed seemed flawed.
I also tried one that had TWRP but maybe i did something wrong bc it didnt work., also there is no official one working for 10.3.2.

What is happening is normal with those instructions (they aren't right).
All you need to do is install TWRP. Do not use the official one, it is out of date. Use TWRP from this thread Link here. The TWRP from that thread is from the official maintainer. It works fine with OOS 10.
- You need to get the phone in fully working order again. Which may mean you need to use the fastboot ROM, as you've probably "goofed" something up at this point. (no offense meant). Make sure your phone boots and such after this.
- For OOS 10 with the phone in fastboot, fastboot boot recoveryimgfilename.img (<-- For OOS 10 you will need TWRP 3.3.1-32 Q Unofficial by mauronofrio from the thread I linked to above) This will boot to TWRP.
- Now run TWRP 3.3.1-32 Unofficial Installer by mauronofrio this will install TWRP. The installer is the same for Android 9 and 10, doesn't matter.
- Once the installer runs, click back, choose reboot to recovery. If you boot to the system, you have to start over. Reboot to recovery!
- Install Magisk 20.3 <-- The current version. The official download page. After that you can reboot to the system. You should now have a rooted, phone with Magisk, and TWRP installed.
Any questions ask.

OhioYJ said:
What is happening is normal with those instructions (they aren't right).
All you need to do is install TWRP. Do not use the official one, it is out of date. Use TWRP from this thread Link here. The TWRP from that thread is from the official maintainer. It works fine with OOS 10.
- You need to get the phone in fully working order again. Which may mean you need to use the fastboot ROM, as you've probably "goofed" something up at this point. (no offense meant). Make sure your phone boots and such after this.
- For OOS 10 with the phone in fastboot, fastboot boot recoveryimgfilename.img (<-- For OOS 10 you will need TWRP 3.3.1-32 Q Unofficial by mauronofrio from the thread I linked to above) This will boot to TWRP.
- Now run TWRP 3.3.1-32 Unofficial Installer by mauronofrio this will install TWRP. The installer is the same for Android 9 and 10, doesn't matter.
- Once the installer runs, click back, choose reboot to recovery. If you boot to the system, you have to start over. Reboot to recovery!
- Install Magisk 20.3 <-- The current version. The official download page. After that you can reboot to the system. You should now have a rooted, phone with Magisk, and TWRP installed.
Any questions ask.
Click to expand...
Click to collapse
So getting it straight, i need to first reset my phone and then do the steps you described.
Can i backup the data first with TWRP to restore it later and avoid setting up everything again?

Davide1713 said:
So getting it straight, i need to first reset my phone and then do the steps you described.
Can i backup the data first with TWRP to restore it later and avoid setting up everything again?
Click to expand...
Click to collapse
Supposedly. I've never used that function of TWRP. Some people have luck with, some people restore things that shouldn't be restored and end up having to wipe the phone again. Personally I just use TitaniumBackup like I always have. I would search for information on that in the TWRP thread if you want to try method. I don't know enough on that to provide solid information.

OhioYJ said:
Supposedly. I've never used that function of TWRP. Some people have luck with, some people restore things that shouldn't be restored and end up having to wipe the phone again. Personally I just use TitaniumBackup like I always have. I would search for information on that in the TWRP thread if you want to try method. I don't know enough on that to provide solid information.
Click to expand...
Click to collapse
Hey man,
Thank you so much. It worked and i stay rooted even after reboot.
May i ask how you use the Titanium Backup, i think back in the days all i used it for was uninstalling system apps. Or if you know some nice guides. If you know other good things to checkout now that i have root i would appreciate it, i have been far away from rooting for too long.
Once again thank you so much

Davide1713 said:
Hey man,
Thank you so much. It worked and i stay rooted even after reboot.
May i ask how you use the Titanium Backup, i think back in the days all i used it for was uninstalling system apps. Or if you know some nice guides. If you know other good things to checkout now that i have root i would appreciate it, i have been far away from rooting for too long.
Click to expand...
Click to collapse
I use it to back up app and app data primarily. It allows me to restore data to apps after a clean install. Since I have the Pro version it's just a batch action (one click essentially). There is also a way to create a flashable .zip you can use in TWRP, although I haven't tried that method, as I'm typically not restoring apps, just data. I also use it remove apps from time to time.

OhioYJ said:
I use it to back up app and app data primarily. It allows me to restore data to apps after a clean install. Since I have the Pro version it's just a batch action (one click essentially). There is also a way to create a flashable .zip you can use in TWRP, although I haven't tried that method, as I'm typically not restoring apps, just data. I also use it remove apps from time to time.
Click to expand...
Click to collapse
Hey man, im sorry i am once again in need.
Idk why but at first i can reboot the system normally without issues. but after a while once i set up everything it just doesnt boot anymore. Am i missing something? do i have to do anything with magisk? download a module or something?
Could it be that google security update is the fault?

Davide1713 said:
Hey man, im sorry i am once again in need.
Idk why but at first i can reboot the system normally without issues. but after a while once i set up everything it just doesnt boot anymore. Am i missing something? do i have to do anything with magisk? download a module or something?
Could it be that google security update is the fault?
Click to expand...
Click to collapse
When you installed everything originally did you fix everything with a clean install? Both slots are the same version of Android? (Like you don't have something weird going on like Android 9 on one and Android 10 on another?)
You definitely have something abnormal going on. There shouldn't be anything in Magisk that you have to do, at least not to prevent crashing. I normally hide it, but that has to do with keeping apps from detecting root.

OhioYJ said:
When you installed everything originally did you fix everything with a clean install? Both slots are the same version of Android? (Like you don't have something weird going on like Android 9 on one and Android 10 on another?)
You definitely have something abnormal going on. There shouldn't be anything in Magisk that you have to do, at least not to prevent crashing. I normally hide it, but that has to do with keeping apps from detecting root.
Click to expand...
Click to collapse
I got it to boot by uninstalling magisk,
I am 100% sure i dont have two different version of android in different slots, bc yesterday i was in big trouble and nothing was working and i flashed on both slots the same version of android 10(dont remember exactly wich one as i tried a couple, but they were the same).
Today when i couldnt boot anymore i went into stock recovery, factory reset -> when it booted i placed the stockOS.zip file in the phone and applied update from local file -> after that i factory reset again from the system settings, so i think the phone should have installed it properly.
Only after that i did what you told me and installed TWRP and Magisk. and as i said it worked and i could restart my device etc..
After a while when i restarted i couldnt boot anymore and went to bootloader. Removing Magisk fixed it,apperantly on install magisk creates a copy of the boot.img that it restores on uninstall, and i booted to system.
Now i can use my phone but dont have root.
Im very thankful for you being there and helping me out trough this, i cant thank you enough

GuestD2272 said:
I got it to boot by uninstalling magisk,
I am 100% sure i dont have two different version of android in different slots, bc yesterday i was in big trouble and nothing was working and i flashed on both slots the same version of android 10(dont remember exactly wich one as i tried a couple, but they were the same).
Today when i couldnt boot anymore i went into stock recovery, factory reset -> when it booted i placed the stockOS.zip file in the phone and applied update from local file -> after that i factory reset again from the system settings, so i think the phone should have installed it properly.
Only after that i did what you told me and installed TWRP and Magisk. and as i said it worked and i could restart my device etc..
After a while when i restarted i couldnt boot anymore and went to bootloader. Removing Magisk fixed it,apperantly on install magisk creates a copy of the boot.img that it restores on uninstall, and i booted to system.
Now i can use my phone but dont have root.
Im very thankful for you being there and helping me out trough this, i cant thank you enough
Click to expand...
Click to collapse
Not sure if you're still having this issue but I'll post the solution just in case anyone gets stumped, does a google search, and comes across this post. You were using the wrong command.
"fastboot boot" just lets you boot with the img so you can verify that root works.
"fastboot FLASH boot" will flash it and root will stick after reboot.
No need to jump through hoops with TWRP and such.