I found this here:
Method 2 – Update Mate 9 to EMUI 8.0 using HiSuite
1) First you need to download two files.
Download Huawei Updater 2.0 – Download
Download Huawei HiSuite Tool – Download
2) Run Huawei Updater, check the box “Custom ROM” and “Custom Port”
3) In Custom ROM enter the correct ROM version for flashing [for example: MHA-L29 8.0.0.321 (C432log)]
4) In Custom ROM enter correct ROM URL (For example: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1819/g1699/v100248/f1)
5) Now click on “Start” button and accept waiting alert messages.
6) Now connect your phone to HiSuite. Make sure device recognized by HiSuite and connected properly.
7) In HiSuite windows, open Settings –> General –> Custom Proxy and configure below changes –
Address: 127.0.0.1
Port: 41279
8) Go back to main HiSuite windows and click on “System update”
9) Press Update and wait for download firmware.
10) Your device will reboot and start upgrading.
Click to expand...
Click to collapse
But 127.0.0.1 gives a "no internet connection" error and 192.168.1.1 (from ipconfig) times out also with an error.
Is this a legitimate way of updating? If so why the errors?
i try update and no internet conection too
and, after says the device no have update, my rom is 8.0.0.321 (C432log), BUT have in FF a new 321C432log day 27 and no update
pardus said:
I found this here:
But 127.0.0.1 gives a "no internet connection" error and 192.168.1.1 (from ipconfig) times out also with an error.
Is this a legitimate way of updating? If so why the errors?
Click to expand...
Click to collapse
I'm getting no errors, it downloads it all and reboots to recovery. But since I have TWRP it doesn't get past that.
I will backup everything and try a full install.
I wonder if anyone got that second method working and if you need UBL for that.
ante0 said:
I'm getting no errors, it downloads it all and reboots to recovery. But since I have TWRP it doesn't get past that.
I will backup everything and try a full install.
Click to expand...
Click to collapse
Are you using 127.0.0.1? And what ROM and address in Huawei Updater?
My current version is MHA-L09C900B186 unlocked international version so I've used "MHA-L09 8.0.0.324(C900)" and "http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1819/g1699/v99803/f1" gathered from the PC version of Firmware Finder but no luck, 127.0.0.1 just gives no internet connection error.
pardus said:
Are you using 127.0.0.1? And what ROM and address in Huawei Updater?
My current version is MHA-L09C900B186 unlocked international version so I've used "MHA-L09 8.0.0.324(C900)" and "http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1819/g1699/v99803/f1" gathered from the PC version of Firmware Finder but no luck, 127.0.0.1 just gives no internet connection error.
Click to expand...
Click to collapse
Tested with the same as you now:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: You get internet connection errors if the URL you input is wrong.
Edit 2: It doesn't matter, it needs to authenticate anyway.
ante0 said:
Edit: You get internet connection errors if the URL you input is wrong.
Click to expand...
Click to collapse
Weird, I used exactly this: "http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1819/g1699/v99803/f1"
pardus said:
Weird, I used exactly this: "http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1819/g1699/v99803/f1"
Click to expand...
Click to collapse
It fails in recovery anyway, so doesn't matter much.
ante0 said:
It fails in recovery anyway, so doesn't matter much.
Click to expand...
Click to collapse
I'm stock though, no TWRP so it might work.
ante0 said:
It fails in recovery anyway, so doesn't matter much.
Click to expand...
Click to collapse
Install patched recovery from Hwota first, then try again.
Every update goes through following steps:
Initiate update
Download
Authorization
Install
This method with Huawei Updater replaces first step. But you are right, that authorization blocks installation.
pardus said:
I'm stock though, no TWRP so it might work.
Click to expand...
Click to collapse
Try to use previous HiSuite 5.0.1.300. It does not work with the current HiSuite version 5.0.1.301
jogefo said:
Try to use previous HiSuite 5.0.1.300. It does not work with the current HiSuite version 5.0.1.301
Click to expand...
Click to collapse
Thanks, got a link perhaps? I can't seem to find the older version.
Edit: Nevermind, I think I got it.
Edit 2: Nope, not working, v5.0.1.300 doesn't recognize my device.
I tried this method.. failed everytime.
Ended up unlocking bootloader and using Hwota method to flash and install ROM.. i had to rebrand my device to europe for it to work, else was stuck on boot loop.. Luckly managed to resolve
pardus said:
Thanks, got a link perhaps? I can't seem to find the older version.
Edit: Nevermind, I think I got it.
Edit 2: Nope, not working, v5.0.1.300 doesn't recognize my device.
Click to expand...
Click to collapse
Try turning on Usb debugging in dev options.
Did you guys try THIS method?
https://www.androidblog.gs/how-to-update-huawei-mate-9-to-android-8-0-oreo-official-firmware/
ante0 said:
Try turning on Usb debugging in dev options.
Click to expand...
Click to collapse
Thanks, yeah, it's on, as is "Allow HiSuite to use HDB", still no luck.
mad.nexus said:
Did you guys try THIS method?
https://www.androidblog.gs/how-to-update-huawei-mate-9-to-android-8-0-oreo-official-firmware/
Click to expand...
Click to collapse
Yes, one of the steps is: "Next, navigate to the Settings app and go into Update option. Press the menu key and chose Local update."
I have no "Local update", will follow up further though.
pardus said:
Yes, one of the steps is: "Next, navigate to the Settings app and go into Update option. Press the menu key and chose Local update."
I have no "Local update", will follow up further though.
Click to expand...
Click to collapse
same here, no such "Local update"
Press the menu key and chose Local update.
Click to expand...
Click to collapse
FFS! Can't find it either? Can anyone talk to that guy from the blog? :/
mad.nexus said:
FFS! Can't find it either? Can anyone talk to that guy from the blog? :/
Click to expand...
Click to collapse
Maybe we should try this
Now on your phone, Open the dialer and call ->enter: *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK，
Click to expand...
Click to collapse
Ps. To initiate update, dload has to be in SD card directory. Yet Software update fails with url to emui.com/...
Related
When i Run It
It Says That
Rebooting to fastboot (again)...
Waiting for fastboot...
FAILED - Go have some lemonade!
Press (almost) any key to exit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:
Helllllllllllllllllllllp
Same problem here, but no solution
same error message... I'm running under windows 7 and got hboot 1.01.0002... I followed all instructions without success...
Yeah same here, though in the topic you first posted in Ruinoc said that they are investigating.
http://forum.xda-developers.com/showpost.php?p=14862461&postcount=73
Strange though, because others have posted saying they have succeeded even though their HBOOT is 1.01.0002 like ours.
for win7 try running the program with run as administrator also check the usb cable
rickwyatt said:
for win7 try running the program with run as administrator also check the usb cable
Click to expand...
Click to collapse
No luck with trying it with run as admin, and I doubt the usb is anything to do with it - its only when it reboots does it fail. the phone is detected at the start which should suggest the usb is ok.
For what it's worth, I also tried it on ubuntu with no luck there either. fails at exactly the same point
try to hard reset the phone it mite help
I used run as administrator and plugged the usb cable in different ports... I also uninstalled the htc sync software and just kept the drivers... the usb debugging thing is activated and the phone is in charge only...
rickwyatt said:
for win7 try running the program with run as administrator also check the usb cable
Click to expand...
Click to collapse
Checked every thing, the cable, run as administrator but to no avail. I am stuck exactly where the most of HTC Wildfire 1.01.0002 bootloader people are stuck.
Use LINUX f*** windows.... It's so easy for LINUX and works!!!!
not 2 sure, but as far as i can remember downgrading hboot to 1.01.0001 from 1.01.0002 is not a problem via ruu, u might wanna try that. i used this one RUU_Buzz_Froyo_HTC_WWE_2_22_405_1_Radio_13_55_55_24H_3_35_20_10_release_160191_signed to upgrade from 0.8 and it worked without any problem.
m
did we mention that windows sucks such a development platform?
Yes try linux version. Not sure but i think it works.
And the key might be different for windows and linux versions. Pls check again.
HBOOT 1.001.0002 is NOT supported at the moment. IEF was helping me for 5 hours last night and eventually he downgraded me to 0001 and now I'm S OFF CM 7
He doesn't wanna release that long method though he said.
dladeli said:
Use LINUX f*** windows.... It's so easy for LINUX and works!!!!
Click to expand...
Click to collapse
+
bharatgaddameedi said:
Yes try linux version. Not sure but i think it works.
And the key might be different for windows and linux versions. Pls check again.
Click to expand...
Click to collapse
=
nedwardsnae said:
For what it's worth, I also tried it on ubuntu with no luck there either. fails at exactly the same point
Click to expand...
Click to collapse
I used a linux key as well, not the windows key.
---------------------------
austendale9 said:
HBOOT 1.001.0002 is NOT supported at the moment. IEF was helping me for 5 hours last night and eventually he downgraded me to 0001 and now I'm S OFF CM 7
He doesn't wanna release that long method though he said.
Click to expand...
Click to collapse
It's weird that the person here and here managed to do it with 1.01.0002 though?
hmmmm.
I just do s-off with the wildfire of my father and I can not mine, both are 0002
All by using windows is realy easy.
S-OFF BY Alpharev
=====================================
STEP 1 : preparation
- download and Create key from http://alpharev.nl/x/beta/
- download HTC driver http://dl4.htc.com/RomCode/Source_and_Binaries/USB_driver_20101122_release.zip
STEP 2:
- install HTC driver that was you download
- Turn on your Phone (wildfire) and go to setting-->Application-->Development-->check "USB debugging"
- connect your phone to PC
- Running alpharev.exe and wait until application need to input serial number your handphone
- Enter correctly key that was you generate from alpharev site [enter]
- wait until that application said you are success rooted your device
on this step you was rooted your device.
INSTALL ROM
====================================================
now you follow this step to install custom roms like CM7 or other roms
http://forum.xda-developers.com/showthread.php?t=1130044
note :
on the step 2 you should select update = yes.
and before you install don't forget to "wipe data/factory reset"
and that install your rom
sorry for my english. i hope this help for you all
thanks for alpharev and CM7
I followed the instructions the first time, thanks. Its the 6th bullet point where it fails.
Apparently there are several versions of 1.01.0002 and this is why it isn't working.
nedwardsnae said:
+
=
I used a linux key as well, not the windows key.
---------------------------
It's weird that the person here and here managed to do it with 1.01.0002 though?
hmmmm.
Click to expand...
Click to collapse
Only certain roms are affected ^^... Vodafone UK being one of them.
Root
Yeah I'm on one of the newest 1.001.0002 HBOOTs and this doesn't work, actually tells me though that it's not compatible.
Oh well, at least progress IS being made..
Root FJ10 Without Custom Kernel
As we all know FJ10 has been released and is floating around the internet, and iv'e decided to share the way i rooted the leak (International SGS II) using stock samsung recovery
Credits
Chainfire CWM-Supersu
Sextape Leakrwilco12 Continue to hosting leak
What you need
PC/MAC/Linux
ADB
USB Cable
Phone
CWM-SuperSU-v0.97.zip
There is two ways to flash the root package in custom recovery (sorry i keep forgetting the other way)
Thank You Sh4Dy for reminding me
Flash Trough Update
1) Download CWM-SuperSU-v0.97.zip
2) Rename CWM-SuperSU-v0.97.zip > update.zip
3) flash as an update
Instructions
1) Enter Recovery mode by holding power+volume up.
2) Connect USB Cable to the phone and PC
3) Choose Install Update with adb
now
4) Now in your terminal/CMD write adb sideload CWM-SuperSU-v0.97.zip
5) Look at the screen and you will see the update package being installed
Congratulations you got now a rooted FJ10 leak without flashing a custom kernel
Proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks, but I get stuck at 3.
I go to search -> cmd and then I type adb sideload CWM-SuperSU-v0.97.zip in it. I think this is wrong but I never worked with ADB.
how it works now? i don't get it also
dajumper said:
how it works now? i don't get it also
Click to expand...
Click to collapse
Works fine here
You need to install adb then cd to the adb directory, then type the command.
Why is it even in dev section?
Spyr0s said:
Works fine here
You need to install adb then cd to the adb directory, then type the command.
Click to expand...
Click to collapse
Will try that tomorrow!
Verstuurd van mijn GT-I9100 met Tapatalk
dajumper said:
how it works now? i don't get it also
Click to expand...
Click to collapse
Make sure you have adb installed on your pc
after that begin with step 1
Doesn't work at 4th step for me, I check devices in adb devices and it shows my device but some large-ass thing comes n it doesn't install the SuperSU zip for some reason
Same thing here
wrong thread. plz delete
ssilviu said:
Same thing here
Click to expand...
Click to collapse
did you also use the supersu provided in op?
Sh4Dy said:
Doesn't work at 4th step for me, I check devices in adb devices and it shows my device but some large-ass thing comes n it doesn't install the SuperSU zip for some reason
Click to expand...
Click to collapse
did you use: http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
Edit: Yes mate, I used that file only, you copied it from Sprint S2's JB thread? Coz I can see the screenshot is of Oct 11 firmware.
Sh4Dy said:
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
Edit: Yes mate, I used that file only, you copied it from Sprint S2's JB thread? Coz I can see the screenshot is of Oct 11 firmware.
Click to expand...
Click to collapse
yes i did, as i know this will work with it too
Buy mobile odin, flash the rom, then you will get root. Quite simple.
I love new rom.
But it wipe all my data system apps...
bogdan1980 said:
Buy mobile odin, flash the rom, then you will get root. Quite simple.
I love new rom.
But it wipe all my data system apps...
Click to expand...
Click to collapse
that isn't mobile odin problem, its wiped automatically
Yeh man, it should work with this too, but idk, flashing zip did the job for me. Try it yourself
Sh4Dy said:
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
.
Click to expand...
Click to collapse
failed to mount sdcard
Sh4Dy said:
Yeh man, it should work with this too, but idk, flashing zip did the job for me. Try it yourself
Click to expand...
Click to collapse
i added your instructions to OP and added you as credit for reminding me :highfive:
ssilviu said:
failed to mount sdcard
Click to expand...
Click to collapse
This is why adb sideload is powerful (as on sprint we were never able to access sdcard)
If you want, I can give proof, I'm currently restoring apps from Ti Backup Pro
Hey guys.
I just wanted to inform you that new update for Nexus 7 is out.
Unfortunately I was not able to catch the ota link.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gesendet von meinem Nexus 7 mit Tapatalk 4
i uploaded it here
be careful
This update disabled TWRP and broke root on my tablet.
Does not update my deb....
Sent from my Nexus 4 using XDA Premium 4 mobile app
I received the update OTA on my rooted (deb) N7/2, booted to TWRP and flashed the .zip, that is in /cache. Update runs fine. I didn't use the recovery option to fix SU permissions.
Just rebooted to OS, went to recovery and flashed the SU.zip afterwards.
Root and TWRP are working fine.
I received the update too and installed it via twrp.
All went fine exept for root. I just had to install chainfires root package (1.55) again.
is it a sign to get a factory image in a short time?
noonecanhide said:
Does not update my deb....
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
might wanna install the deb version of twrp...
OTA URL > http://android.clients.google.com/p...signed-razorg-JLS36C-from-JSS15J.7003a71d.zip
Thanks to kendong2 for the file name.
Does the update solve the following touchscreen problem: the tablet lies on a table and the screen does not recognize your tabs...
Elting said:
Does the update solve the following touchscreen problem: the tablet lies on a table and the screen does not recognize your tabs...
Click to expand...
Click to collapse
You have touchscreen problems on a LTE version? I don't have any problems on my LTE version with 08.2013 build date.
If the update is for fixing touchscreen problems, then I'm not sure if I should update...
No, I have the FLO but I think, that FLO will get this update, too... sooner or later...
poisike said:
OTA URL > http://android.clients.google.com/p...signed-razorg-JLS36C-from-JSS15J.7003a71d.zip
Click to expand...
Click to collapse
Slightly OT here, but since it might still be useful for future OTA updates: How does one catch/find out the OTA URL of an update? I understand that the update itself gets downloaded to /cache and there you can find the filename, but what about the URL?
dasmanul said:
Slightly OT here, but since it might still be useful for future OTA updates: How does one catch/find out the OTA URL of an update? I understand that the update itself gets downloaded to /cache and there you can find the filename, but what about the URL?
Click to expand...
Click to collapse
simplest way is a proxy in your wifi network, which handles all http/https requests for the phone/tablet.
dasmanul said:
Slightly OT here, but since it might still be useful for future OTA updates: How does one catch/find out the OTA URL of an update? I understand that the update itself gets downloaded to /cache and there you can find the filename, but what about the URL?
Click to expand...
Click to collapse
If you know the update file name then it's easy. Address is android.clients.google.com/packages/ota/google_devicecodename/filename so in our case android.clients.google.com/packages/ota/google_razorg/filename
if i am not mistaken the url is also visible in logcat.
So just to make sure I`m getting this right, I have a rooted DEB with TWRP installed:
1. Flash the zip from recovery
2. Flash SuperSU.zip
3. Reboot
4. Done
Or is a reboot needed in between between steps 1. and 2.? Does anyone have a working link to the SuperSU files needed (thanks in advance!).
Jacktheskipper said:
So just to make sure I`m getting this right, I have a rooted DEB with TWRP installed:
1. Flash the zip from recovery
2. Flash SuperSU.zip
3. Reboot
4. Done
Or is a reboot needed in between between steps 1. and 2.? Does anyone have a working link to the SuperSU files needed (thanks in advance!).
Click to expand...
Click to collapse
No need to reboot between 1&2, at least not on the wifi model.
http://download.chainfire.eu/346/SuperSU/UPDATE-SuperSU-v1.55.zip
sfhub said:
No need to reboot between 1&2, at least not on the wifi model.
http://download.chainfire.eu/346/SuperSU/UPDATE-SuperSU-v1.55.zip
Click to expand...
Click to collapse
Thanks for the quick reply and the direct link!
Hope this goes down without trouble, will give it a try later! :good:
xdacinq said:
simplest way is a proxy in your wifi network, which handles all http/https requests for the phone/tablet.
Click to expand...
Click to collapse
Even more simple is:
1) just allow a USB developer mode in the settings (no root needed)
2) fire up your ubuntu linux
3) run adb lolcat | grep http in the terminal
and take a look for something like
I/SystemUpdateService( 3997): starting download of hxxp://android.clients.google.com/packages/ota/google_razorg/...
[Honor 4x][Che1-L04]{might work for others too} Bootloader Unlock & Recovery flash
This has been reported working for Che1-L04 and Che2-L11 models. If you have a different device than these two then please try this method and report back on comments so I can update on which devices this work. I waited two months for a bootloader unlock code from Huawei. Then posted on facebook pages of Huawei and Honor about not getting it. Then I got it myself some days ago without much hassle. Here's how I did it:
Opening Huawei Account:
1. Go to http://hwid1.vmall.com/oauth2/porta...hp&viewType=1&isDialog=0&themeName=cloudTheme
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Select Register for Free>>.
3. Select Register Email Address and open an account. Then Log in using your email, password using the link from step 1.
Getting unlock code:
1. Go to http://www.emui.com/plugin.php?id=unlock&mod=unlock&action=apply
2. Then you'll find a page where there'll be lots of Chinese text with a checkmark below. Check it and click the button below.
3. You'll be on the unlock page now.
4. Select the second option from the first box.
5. Select the first option from second box.
6. In the third field put your Serial Number. (Can be found written on the battery)
7. In the fourth field put your IMEI. (Can be found dialing *#06# on the dialer. Only the first one is needed)
8. In the fifth field put the code as shown in the image.
9. Click the blue button below all fields.
10. If failed put the image code and retry. It gets done in about two to three tries.
You will now have the 16 digit bootloader unlock code. Save it somewhere.
Unlock process:
After this process the phone resets itself to factory settings and all apps data etc are removed. If you want to have them, backup beforehand to SD card using Huawei's Backup app.
1. Set up ADB and Fastboot from this link http://forum.xda-developers.com/showthread.php?p=48915118#post48915118.
2. Turn off your phone. Connect to PC while holding volume down button release after there's a vibration feedback.
3. Open CMD in your fastboot location. Type and Enter "fastboot devices" (without quotation). If it returns a code with your device then it's connected.
4. Type and Enter "fastboot oem unlock XXXXXXXXXXXXXXXX" (without quotation where XXXXXXXXXXXXXXXX is the code you got from huawei site).
Bootloader should be unlocked. And the phone will now proceed to factory reset it. All your data will be erased from phone storage.
Recovery flash:
1. Download recovery from http://forum.xda-developers.com/android/development/recovery-twrp-2-8-7-0-touch-recovery-t3199386.
2. Put it in your adb/fastboot folder.
3. Connect your phone in fastboot mode again. Turn off>>hold volume down button and connect to PC>>Release button upon vibration.
4. Check by running "fastboot devices" again.
5. Now type and enter "fastboot flash recovery recoveryname.img" (without quotation and recoveryname.img should be the recovery you downloaded and it should be in the folder where adb and fastboot is. In our case that should be "fastboot flash recovery twrp2.8.7.0_cherry_en_f2fs.img")
Recovery should now be flashed and ready for action. Please give your reaction on the poll only if you've done all the necessary steps.
THANK YOU.
Good
Aswm... man Thanks for Sharing with us
Raju Mondal said:
Aswm... man Thanks for Sharing with us
Click to expand...
Click to collapse
Hei Raju nice to see you here too.
rayulove69 said:
Hei Raju nice to see you here too.
Click to expand...
Click to collapse
@rayulove69 do u know me?
Raju Mondal said:
@rayulove69 do u know me?
Click to expand...
Click to collapse
I think I saw you on facebook with an anonymous mask profile picture
rayulove69 said:
I think I saw you on facebook with an anynymous mask profile picture
Click to expand...
Click to collapse
Yes, Mr @rayulove69 u got me...
Thanks Dr for this useful post.. Some guys in my Facebook Group found your Guide useful... It's really Works..
Thanks for Share with us...
I would liked if u pls join my Facebook Group My Group link it'll be great.. :good:
Raju Mondal said:
Yes, Mr @rayulove69 u got me...
Thanks Dr for this useful post.. Some guys in my Facebook Group found your Guide useful... It's really Works..
Thanks for Share with us...
I would liked if u pls join my Facebook Group My Group link it'll be great.. :good:
Click to expand...
Click to collapse
I'm actually there already
rayulove69 said:
I'm actually there already
Click to expand...
Click to collapse
Oh, That's great.. Thank you
Working with che2-l11 ?
When i tried to reach the Url, it says: "Plug-in does not exist or has been closed."
omarmoro said:
Working with che2-l11 ?
Click to expand...
Click to collapse
Please try this method and report back if it does. Should work.
shanthipatel said:
When i tried to reach the Url, it says: "Plug-in does not exist or has been closed."
Click to expand...
Click to collapse
The links work fine for me. Please try a different browser maybe. I'm using firefox.
omarmoro said:
Working with che2-l11 ?
Click to expand...
Click to collapse
shanthipatel said:
When i tried to reach the Url, it says: "Plug-in does not exist or has been closed."
Click to expand...
Click to collapse
I have updated the guide. please try to follow what I've written sequentially. thank you.
when i treid ..
i clicked the blue button as u said .. it shows me a message and after translating it , it says " Please select a product type " !!!
Thanks for update, Got the 16 digit unlock code.
thanks for posting this
very very useful post ....thanks bro.....
omarmoro said:
when i treid ..
i clicked the blue button as u said .. it shows me a message and after translating it , it says " Please select a product type " !!!
Click to expand...
Click to collapse
you maybe are not selecting the second option from the first box. that selects the "smartphone" option. please follow the things i wrote closely.
shanthipatel said:
Thanks for update, Got the 16 digit unlock code.
Click to expand...
Click to collapse
hasnainnizami said:
very very useful post ....thanks bro.....
Click to expand...
Click to collapse
most welcome you all are.
rayulove69 said:
you maybe are not selecting the second option from the first box. that selects the "smartphone" option. please follow the things i wrote closely.
oh man !
i selected the second option from the first box as u write ._.
but i didn't select anything in the second box "product number" because honor 4x product number is not present !
Click to expand...
Click to collapse
omarmoro said:
rayulove69 said:
you maybe are not selecting the second option from the first box. that selects the "smartphone" option. please follow the things i wrote closely.
oh man !
i selected the second option from the first box as u write ._.
but i didn't select anything in the second box "product number" because honor 4x product number is not present !
Click to expand...
Click to collapse
Do what I said for second box too, doesn't matter that your model is not on the list. Ours che1-L04 isn't in the list either but we do get code using another model name.
Click to expand...
Click to collapse
rayulove69 said:
omarmoro said:
Do what I said for second box too, doesn't matter that your model is not on the list. Ours che1-L04 isn't in the list either but we do get code using another model name.
Click to expand...
Click to collapse
ok i'll choose any model number in the list :good:
Click to expand...
Click to collapse
OnePlus 5T Unbrick tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the Oneplus 5T Unbricking Tool files provided by OnePlus during a Remote Session
Download
No Password Needed
OxygenOS 4.7.4 (Nougat 7.1.1)
OxygenOS 5.1.3 Thanks to @Titokhan
OxygenOS 5.1.7 (Oreo 8.0.1)
Drivers
OnePlus.QualcommDrivers.zip
A Fantastic Video of How To Unbrick OnePlus 5T
Thanks to @hypergamer1231
https://www.youtube.com/watch?v=PpLvmID1wdI
How To:
For the on Plus 5T
Step 1: Download Driver and Unbricktool
Step 2: Extract Drivers and Recovery Tool files on Desktop.
Step 3: If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :
http://www.howtogeek.com/167723/how....igned-drivers/
Step 4: Press the power button for 40 seconds to turn off the phone.
Step 5: Press the volume up button for 10 seconds, while connecting the device with the computer.
Step 6: Open your device-manager and make sure in "Unknown devices" is one device with the name "QHUSB_BULK".
Step 7: Right Click on your device in the device manager and select Update Device Software. Choose manually the drivers folder and install the driver.
Step 8: When the device shows as "Qualcomm 9008", go run the MSM Download Tool as administrator.
Step 9: Click start at top left corner and wait for it to finish (green text will come).
Step 10: Disconnect phone from PC and boot into system.
thanks - @LloydSmallwood
!!! I AM NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING AND TESTING, I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES OR LOST DATA... FLASH AND TEST AT OWN RISK !!!Thanks to:
[email protected]dabistduja and @randallstevens for Decryption
[email protected]vtec303 - for testing 128GB version
[email protected]raptor2003 - for testing 128GB version
Nice and how you decrypt the file as it has password.
[email protected] said:
Nice and how you decrypt the file as it has password.
Click to expand...
Click to collapse
Just run a clipboard saving program in the background and wait for them to paste the password [emoji14]
Sent from my ONEPLUS A5010 using Tapatalk
paultje162 said:
Just run a clipboard saving program in the background and wait for them to paste the password [emoji14]
Click to expand...
Click to collapse
Intelligent:good:
boontho[email protected] said:
Intelligent:good:
Click to expand...
Click to collapse
excuse me but I do not understand what you said to do to pass the password
lerieur said:
excuse me but I do not understand what you said to do to pass the password
Click to expand...
Click to collapse
You get the answer when you have remote session with op L2 technician
paultje162 said:
Just run a clipboard saving program in the background and wait for them to paste the password [emoji14]
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Genius....
Thanks anyway.
I have scheduled with LV 2 Technician tonight to fix my brick device.
This thread could be useful for my 2nd time bricking : D
tonni3 said:
Genius....
Thanks anyway.
I have scheduled with LV 2 Technician tonight to fix my brick device.
This thread could be useful for my 2nd time bricking : D
Click to expand...
Click to collapse
Ummmmm this tool above means u don't need them, those are the same files u will get from them and it shows u how to unbrick so u can do it urself
those files above are not encrypted.
paultje162 said:
Just run a clipboard saving program in the background and wait for them to paste the password [emoji14]
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Bradl79 said:
Ummmmm this tool above means u don't need them, those are the same files u will get from them and it shows u how to unbrick so u can do it urself
those files above are not encrypted.
Click to expand...
Click to collapse
Yes, but I don't have the password and I had to rush for work this morning, just found this thread when lurking forum at work.
tonni3 said:
Yes, but I don't have the password and I had to rush for work this morning, just found this thread when lurking forum at work.
Click to expand...
Click to collapse
if u use the method above, please let us know how it went. Thank u
Very nice.:fingers-crossed::fingers-crossed::fingers-crossed:
I have factory resetted my phone using this msm tool and I can confirm this tool along with the files works for oneplus 5T, thanks for uploading this, cheers.
vtec303 said:
I have factory resetted my phone using this msm tool and I can confirm this tool along with the files works for oneplus 5T, thanks for uploading this, cheers.
Click to expand...
Click to collapse
what storage size do u have?
Bradl79 said:
what storage size do u have?
Click to expand...
Click to collapse
mine is 128gb, but this tool should work on 64gb as well afaik? cheers.
What's the password
hypergamer1231 said:
What's the password
Click to expand...
Click to collapse
There's no password, its all open and working, but please make sure the qualcom drivers are installed on your windows machine and recognise your phone as per the instructions on the link in op, cheers.
I have not test this and I hope I won't have to do so soon, but If that's work as expected this should definitively get pinned.
Thank !
Thank you, This has worked for me too.
fyi, I have a 128gb version.
Ti amo !
Grazie.....
Thank you for confirming your storage and this should work just fine for both the 128GB and 64GB, I was just making sure. B/C the OnePlus One had a multi storage version.