Im in DU. I have a nandroid backup of marshmallow stock. Can i just restore it? Ty
Enviado desde mi XT1575 mediante Tapatalk
Usuario503 said:
Im in DU. I have a nandroid backup of marshmallow stock. Can i just restore it? Ty
Enviado desde mi XT1575 mediante Tapatalk
Click to expand...
Click to collapse
Yes.
I think you haven't only stock recovery in backup.
dzidexx said:
Yes.
I think you haven't only stock recovery in backup.
Click to expand...
Click to collapse
Are you sure that it wont brick? Im running DU on/7.1.2 and i will be restoring a nandroid backup (TWRP) of stock marshmallow... I heard that peoole bricks their phones for flashing old firmware
Enviado desde mi XT1575 mediante Tapatalk
They was on stock Nougat and tried flashing stock MM
dzidexx said:
They was on stock Nougat and tried flashing stock MM
Click to expand...
Click to collapse
I dont understand. I am right now on DIRTY UNICORNS 7.1.2, before that i was on 6.x.x (stock marshmallow), before i upgraded to DU i made a nandroid backup in case of problems. But DU have a very short battery life, so i want MM back.... But i heard thats imposible, becouse it will brick my phone to downgrade the vercion.. Please tell me what to do!! Thanks
Any 7+ custom has nothing from stock Nougat. You are safe.
After restore - you need also stock recovery if you want update to nougat.
For stock remember:
OTA update is only for full stock firmware.
Downgrade(7-6) is possible without bootloader and gpt.
After downgrade any ota update can end with hard brick.
dzidexx said:
Any 7+ custom has nothing from stock Nougat. You are safe.
After restore - you need also stock recovery if you want update to nougat.
For stock remember:
OTA update is only for full stock firmware.
Downgrade(7-6) is possible without bootloader and gpt.
After downgrade any ota update can end with hard brick.
Click to expand...
Click to collapse
So are you sure i will be ok? Also, where i can get stock recovery? I am right now on Dirty Unicorns 7.1.2.
Enviado desde mi XT1575 mediante Tapatalk
https://forum.xda-developers.com/search/thread/3511151?query=Restored stock
dzidexx said:
https://forum.xda-developers.com/search/thread/3511151?query=Restored stock
Click to expand...
Click to collapse
So...
(Running in 7.1.2)
1.- restore nandroid backup in MM
2.- flash recovery.img
Done?
Enviado desde mi XT1575 mediante Tapatalk
dzidexx said:
https://forum.xda-developers.com/search/thread/3511151?query=Restored stock
Click to expand...
Click to collapse
Stock recovery for DECEMBER patch (wich is my nandroid backup vercion) is not available anywere.. Can i flash recovery from an older patch?
It was somewhere here:
https://forum.xda-developers.com/moto-x-style/general
dzidexx said:
It was somewhere here:
https://forum.xda-developers.com/moto-x-style/general
Click to expand...
Click to collapse
Ok i will do it now.... I will start by removing Magisk
dzidexx said:
It was somewhere here:
https://forum.xda-developers.com/moto-x-style/general
Click to expand...
Click to collapse
Im doing the restore rn........ im so nervous......
dzidexx said:
It was somewhere here:
https://forum.xda-developers.com/moto-x-style/general
Click to expand...
Click to collapse
OK... everything is working.... but how do i flash the recovery?? Thanks
At the end go to twrp - install - tap & change "zip" to image.
dzidexx said:
It was somewhere here:
https://forum.xda-developers.com/moto-x-style/general
Click to expand...
Click to collapse
Ok recovery is BRICKED... shows "No commands"... but i can use the phone
Really?
https://www.google.pl/url?sa=t&sour...3AMIQFghfMAw&usg=AOvVaw3hUVAl5kht9uwReB5-BMiU
https://www.google.pl/search?q=moto...0l2.11132j0j4&sourceid=chrome-mobile&ie=UTF-8
Usuario503 said:
Ok recovery is BRICKED... shows "No commands"... but i can use the phone
Click to expand...
Click to collapse
lol "BRICKED" thats the normal stock Android recovery.
power and volumne up
Related
Android Lollipop 5.1 SOAK TEST TWRP BACKUPIt's done, here we go. and before you start, remember to update your TWRP to the latest version.
Okay guys, as promised, here is the complete 5.1 cleaned up BACKUP...
Instructions:
1. Download it.
2. Extract it.
3. Move to your Internal Storage or External.
4. Restore it.
For Brazilian or Argentina users, go to bootloader a.k.a fastboot and flash this, will fix the SIM problem.If any india user is having problem with SIM, here is the india baseband.
Sorry by the poor OP, but i was in hurry
Just to warn, THIS WILL NOT WORK WITH CWM!!!!If the backup isn't showing on the list do this, go to the extracted zip, put your serial number on the third folder of the backup (TWRP/BACKUP/<yourserialnumber>/2015-06-16--09-03-35_LPC23.13-34/) how do i know my serial number? go to about phone or in bootloader and get your serial number...Works fine on XT1021 (thanks to @Carlos Arriaga) and XT1022.Credits for the OTA: Saurabh Sinha
And if you want to remove all the bloatware from the 5.1 stock, here is the solution, just flash this (all bloatware script thanks to @Carlos Arriaga)
Here is the link!
1. Download it.
2. Move to your internal or external
3. Flash it like a normal flashable zip.
jonaaa said:
Okay, listen up! i'm uploading on Drive my cleaned 5.1 backup... it will take some hours, it should fix these '7MB update' problems and for brazilian and argentina users, i have some basebands that should work with you too... for indian users, should work... keep that in mind that my Moto E is XT1022 and i don't know if this will work on XT1021... so, please, wait...
http://i.imgur.com/uCe6hOD.png
It's on another language but, my internet isn't that fast so, it will take some time. i think tonight will be ready (I THINK.)
Click to expand...
Click to collapse
Waiting buddy. All the best.
@jonaaa great man will try
It will mess baseband?
Okay guys, it's done. i think it will not mess with baseband... but anyway, i'll let the indian baseband in case of problems... i'll upload soon.
@jonaaa so now im on AOSP 5.1.1 now after wiping dalvik,data,cache can i restore Stock 5.1 via twrp .....
vinay001 said:
@jonaaa so now im on AOSP 5.1.1 now after wiping dalvik,data,cache can i restore Stock 5.1 via twrp .....
Click to expand...
Click to collapse
Yes
vinay001 said:
@jonaaa so now im on AOSP 5.1.1 now after wiping dalvik,data,cache can i restore Stock 5.1 via twrp .....
Click to expand...
Click to collapse
Yes, and if someone could post some screenshots, i will attach on OP.
@jonaaa and @Adarsh1998 downloading guys it's slow here internet
vinay001 said:
@jonaaa and @Adarsh1998 downloading guys it's slow here internet
Click to expand...
Click to collapse
Okay, download it and say if it works.
Downloading. Will report.
i never updated to 5.0.2 stock rom..so i have kitkat bootloader and radio drivers...will this work?because bootloader and radio got updated in lollipop...others might have the same question too.
Sent from my Moto E using Tapatalk
Faiz Syed said:
i never updated to 5.0.2 stock rom..so i have kitkat bootloader and radio drivers...will this work?because bootloader and radio got updated in lollipop...others might have the same question too.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
Well, you will only know if you test it, because i have LP bootloader... i don't know if it will work or not on KK bootloader.
This backup is only for XT1022?
bioly87 said:
This backup is only for XT1022?
Click to expand...
Click to collapse
Well, i tested on XT1022... don't know if it works on XT1021.
@jonaaa have u seen one for xt1025? im looking so hard for it
Enviado de meu condor usando Tapatalk
DAVI FELICIANO said:
@jonaaa have u seen one for xt1025? im looking so hard for it
Enviado de meu condor usando Tapatalk
Click to expand...
Click to collapse
I think the only difference from xt1025 to xt1022 is the TV. but, i think it will work but the TV will not be available.
jonaaa said:
I think the only difference from xt1025 to xt1022 is the TV. but, i think it will work but the TV will not be available.
Click to expand...
Click to collapse
just one question, if i go back to 4.4.4 stock and stock recovery and enter in MFN will i receive it right now? or just the people that was MFN member before receive it?
Enviado de meu condor usando Tapatalk
DAVI FELICIANO said:
just one question, if i go back to 4.4.4 stock and stock recovery and enter in MFN will i receive it right now? or just the people that was MFN member before receive it?
Enviado de meu condor usando Tapatalk
Click to expand...
Click to collapse
Just only users are receiving this OTA, if you're lucky, you'll receive, but i can't guarantee this...
jonaaa said:
Just only users are receiving this OTA, if you're lucky, you'll receive, but i can't guarantee this...
Click to expand...
Click to collapse
Im on soak 5.0.2 and im in MFN now can i be choosen or i miss something?
Enviado de meu XT1025 usando Tapatalk
I update my phone, but now its stuck on a bootloop, i live in chile now, so i cant send my phone to customer service, i have any option to have the stock firmware and install it?...
Pd: i have the bootloader lock, and i dont have debbuging mode active
Please help me.
Thanks :crying:
Have you tried removing the micro SD then rebooting. That fixed the bootloop for me.
the firmware is corrupted i only can enter to fastboot and recovery mode...
It's unlikely for an OTA to brick a phone. If you flashed any MM ROM, then you should have bootloader already unlocked.
In any case, you can try the MM image from this thread: http://forum.xda-developers.com/moto-x-style/help/howto-enable-band-12-moto-pure-mm-ota-t3267057
You can then boot into recovery and try to sideload the image via "adb sideload name-of-file.zip" to see if that fixes it.
i need the other zip the soak test 24.11.28...
Donkan694 said:
i need the other zip the soak test 24.11.28...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=64232697&postcount=774
pinoymutt said:
http://forum.xda-developers.com/showpost.php?p=64232697&postcount=774
Click to expand...
Click to collapse
This is the 23.21.18 thanks... i hate motorola why they didnt upload the OFW
Donkan694 said:
This is the 23.21.18 thanks... i hate motorola why they didnt upload the OFW
Click to expand...
Click to collapse
Actually I believe Moto has a weird naming convention where they name the OTA zip based on the old firmware version, not the new one. There is only one OTA for the Pure and this one should bring you up to the release MM.
pinoymutt said:
Actually I believe Moto has a weird naming convention where they name the OTA zip based on the old firmware version, not the new one. There is only one OTA for the Pure and this one should bring you up to the release MM.
Click to expand...
Click to collapse
I was thinking the same, but for some reason its diferent
Enviado desde mi SM-T320 mediante Tapatalk
Donkan694 said:
I was thinking the same, but for some reason its diferent
Enviado desde mi SM-T320 mediante Tapatalk
Click to expand...
Click to collapse
Just to confirm -- what model are you trying to apply this to -- the Style (which region) or Pure (US)?
pinoymutt said:
Just to confirm -- what model are you trying to apply this to -- the Style (which region) or Pure (US)?
Click to expand...
Click to collapse
It is the pure US....
Donkan694 said:
It is the pure US....
Click to expand...
Click to collapse
Hmm, should be the right one. But the OTA is a patch, meaning you have to have a working stock firmware to update properly. If your firmware is indeed corrupted somehow, the OTA probably won't work correctly -- and like you said there is no official full signed firmware from Moto
If you are bootloader unlocked, you may want to consider flashing one of the MM pre-built ROMs, but if not, you may be screwed for now unless there is a way to fix your firmware (are you able to do a factory reset from the recovery menu?)
i already do the factory reset... the security in this phone its good, but i fail with something the smathphone almost die... i dont lose the hope yet
thanks for everything
Hey guys,
so just in case I would sell my phone in future .. I would know how to get back to full official Flyme Rom with locked bootloader and meizu stock recovery. In the cm12.1 thread is one tutorial in the headpost but I've read the comments in the thread and now I do not know what is right and what is wrong to get back official Flyme Rom. Please, can someone tell me how I get this done, PLEASE
You have to flash patched recovery flyme, and then flash original flyme rom by normal way( recovery mode or choosing the rom with a file explorer)
Enviado desde mi MX4 mediante Tapatalk
And that is the safest way?
As i know, is the only way, if we are talking about andriod mx4. I did it and no problems.
The safest way to flash patched rechovery is via fastboot.
Enviado desde mi MX4 mediante Tapatalk
move offical rom to root direc. and flash patced recovery. turn off phone. press volume up + power button. select update and clean data.
OK thanks guys
LemonJuls said:
OK thanks guys
Click to expand...
Click to collapse
Wait you can brick your phone. Some people have tested it:
- Back to Flyme 4.2.8.2 patched
- Reflash Flyme 4.2.8.2 official
- Full Re-Lock
IF YOU FLASH ANOTHER FLYME (NOT 4.2.8.2) OFFICIAL IS FULL BRICK.
Naphtha said:
Wait you can brick your phone. Some people have tested it:
- Back to Flyme 4.2.8.2 patched
- Reflash Flyme 4.2.8.2 official
- Full Re-Lock
IF YOU FLASH ANOTHER FLYME (NOT 4.2.8.2) OFFICIAL IS FULL BRICK.
Click to expand...
Click to collapse
Ok, first flash patched recovery, then 4.2.8.2 ( I or A?) and then I can flash any official Rom without brick?
LemonJuls said:
Ok, first flash patched recovery, then 4.2.8.2 ( I or A?) and then I can flash any official Rom without brick?
Click to expand...
Click to collapse
Some people have tested it! But i'm not sure! You coming from an A or I? What you have patched for unlock?
Coming from 4.2.8.2A but phone is actually a international model...
LemonJuls said:
Coming from 4.2.8.2A but phone is actually a international model...
Click to expand...
Click to collapse
You can try, but why? Just sell it unlocked
Dear friends,
You all say that the first step should be flashing the custom recovery, but how? With flashify?
Thanks.
@juancargarcia84 did your coming back to flyme work ? how did you do it ? ?
Mulic said:
Dear friends,
You all say that the first step should be flashing the custom recovery, but how? With flashify?
Thanks.
Click to expand...
Click to collapse
You can do it via fastboot :)
Inviato dal mio MX4 utilizzando Tapatalk
Naphtha said:
You can do it via fastboot :)
Inviato dal mio MX4 utilizzando Tapatalk
Click to expand...
Click to collapse
Thanks man. How do one does it via fastboot?
Mulic said:
Thanks man. How do one does it via fastboot?
Click to expand...
Click to collapse
Volume Down + Power = Fastboot mode
In a Prompt of comand do: fastboot flash recovery "recovery.img" (and move recovery file on window and do enter)
An example: https://www.youtube.com/watch?v=CtYNtT07QrM
Naphtha said:
Volume Down + Power = Fastboot mode
In a Prompt of comand do: fastboot flash recovery "recovery.img" (and move recovery file on window and do enter)
An example: https://www.youtube.com/watch?v=CtYNtT07QrM
Click to expand...
Click to collapse
Thanks so much! Is it safer than flashing with flashify?
After I do it, and after I go back to the official 4.2.8.2, can I update it normally to 4.5.7i, or even to flyme 5 when it comes out, or will I risk brick?
Thanks again.
Naphtha said:
Some people have tested it! But i'm not sure! You coming from an A or I? What you have patched for unlock?
Click to expand...
Click to collapse
I flashed 4.2.8.2 with patched recovery and patched ROM with patched uboot (same as what got me "unlocked")
After that flashed full unmodified 4.2.8.2, let boot, rebooted for good measure then flashed latest flyme 5
Sent from my MX4 using XDA Free mobile app
FrAsErTaG said:
I flashed 4.2.8.2 with patched recovery and patched ROM with patched uboot (same as what got me "unlocked")
After that flashed full unmodified 4.2.8.2, let boot, rebooted for good measure then flashed latest flyme 5
Sent from my MX4 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for sharing from your experience! Did you flashed the flyme 5 normally, the standard way, by just putting it on root and openning? Where did you get it? So many different versions. How do you like it?
Thanks again.
Naphtha said:
Wait you can brick your phone. Some people have tested it:
- Back to Flyme 4.2.8.2 patched
- Reflash Flyme 4.2.8.2 official
- Full Re-Lock
IF YOU FLASH ANOTHER FLYME (NOT 4.2.8.2) OFFICIAL IS FULL BRICK.
Click to expand...
Click to collapse
"Flyme 4.2.8.2 patched" - You say that I must flash patched Flyme 4.2.8.2 or flash a stock Flyme 4.2.8.2i by patched recovery and than by stock?? On this I can install Flyme 4.5.7 and update it with OTA?
Wwwwwooow
http://www.techdroider.com/2016/03/moto-g-3rd-generation-6-0-1-marshmallow-india.html?m=1
https://motorola-mobility-en-in.custhelp.com/app/answers/detail/a_id/110324
Did anyone capture the ota??
still didnt get 6.0.1 is it really rolled out..??:what:
6.0.1 OTA rolling out
Mumbai, India.
XT1550 2GB 16GB
I got the OTA
I did got the OTA and device is upgraded to 6.0.1 with march security patch
ethan1234 said:
Did anyone capture the ota??
Click to expand...
Click to collapse
I received ota update but have rooted phone with systemless root.. What to do.. Somebody pl guide
Why 6.0.1 could not detect USB in File Manager? Any idea to fix it?
Its out for Turbo as well as Moto G3 -http://www.techdroider.com/2016/03/android-6-0-1-update-moto-g3-g-turbo-india.html
Turbo update is of 133mb and Moto G 371.4mb ..
Phone is heating too much after update !
Will this update come to all versions of the motoG?
I have a rooted phone with custom revcovery and I by mistake selected the update. What do I do now as the phone restarts all the time!!
FPThatea said:
Why 6.0.1 could not detect USB in File Manager? Any idea to fix it?
Click to expand...
Click to collapse
Please elaborate your problem.
skr975 said:
I have a rooted phone with custom revcovery and I by mistake selected the update. What do I do now as the phone restarts all the time!!
Click to expand...
Click to collapse
U can try to flash the original recovery form the official firmware.. If still you suffer the bootloop you have to completely flash the original stock rom
Try to backup your data from your current recovery if possible
Hope this helps
Enviado desde mi MotoG3 mediante Tapatalk
skr975 said:
I have a rooted phone with custom revcovery and I by mistake selected the update. What do I do now as the phone restarts all the time!!
Click to expand...
Click to collapse
Did you make a backup with your custom recovery?
jcalderonv74 said:
U can try to flash the original recovery form the official firmware.. If still you suffer the bootloop you have to completely flash the original stock rom
Try to backup your data from your current recovery if possible
Hope this helps
Enviado desde mi MotoG3 mediante Tapatalk
Click to expand...
Click to collapse
Solved it by clearing cache and dalvik cache in recovery.. but thanks
It's better and safer to flash factory images 6.0.1 !
For a smoother experience, flash 6.0.1 factory images from here: http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Yes. Its rolled out..........
rockshj said:
still didnt get 6.0.1 is it really rolled out..??:what:
Click to expand...
Click to collapse
Its rolled out. U can update.... I have already did it.... :good:
PoseidonKing said:
Please elaborate your problem.
Click to expand...
Click to collapse
I have flashed 6.0.1 but when I connected OTG Pen Drive it was not shown in any File manager. It can be browse only through its default Explorer from notification with limitation i.e can't even install apk file.
How can I get it back to detect like in LP.
Will moto e2 4G gets Android 6.0.1
Dont Update
After the update my touch screen was not responding as before the update ... i did factory reset and everything.. anyone facing the same issue
Yousvel said:
For a smoother experience, flash 6.0.1 factory images from here: http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Click to expand...
Click to collapse
Where is the 6.0.1? I just checked the post, and it's only showing 6.0.
EDIT - Nevermind - I see it's only for XT1550 (Dual-SIM).
https://forums.oneplus.net/threads/oxygenos-4-1-7-ota-for-oneplus-3-3t.609756/
Cheers, any idea how a rooted user would install the update
athaarv said:
Cheers, any idea how a rooted user would install the update
Click to expand...
Click to collapse
Waiting full zip file and flashing via twrp
Στάλθηκε από το ONEPLUS A3003 μου χρησιμοποιώντας Tapatalk
If i am rooted with Magisk, and i unroot by flashing the magisk uninstaller, will i be able to update normally, like a non-root user?
luptatorul said:
If i am rooted with Magisk, and i unroot by flashing the magisk uninstaller, will i be able to update normally, like a non-root user?
Click to expand...
Click to collapse
Not sure on this, but if we use Magisk Hide to hide root from System Update, I think we might get normal update. Haven't tried this.
Kannan Suresh said:
Not sure on this, but if we use Magisk Hide to hide root from System Update, I think we might get normal update. Haven't tried this.
Click to expand...
Click to collapse
Don't do that....!!..You can flash partial OTA's only through stock recovery ...
When you have twrp installed you need the full ROM zip...
cultofluna said:
Don't do that....!!..You can flash partial OTA's only through stock recovery ...
When you have twrp installed you need the full ROM zip...
Click to expand...
Click to collapse
Thanks
Its taking one plus quite a while to upload 4.1.7 full zip
If i am on 4.1.6, rooted, can i dirty flash the full 4.1.7 zip WITHOUT facing any kind of issue?
Great
luptatorul said:
If i am on 4.1.6, rooted, can i dirty flash the full 4.1.7 zip WITHOUT facing any kind of issue?
Click to expand...
Click to collapse
Yes, but after flashing new zip, don't boot to system. Remain in recovery and flash Super SU or Magisk.
Full-Rom
https://mega.nz/#!gqATBJyB!AYaL4ukfu9etd04wCeWEmkSukN-6X_OTq5OwHgH-tBI
Anyone have the OTA for 3T download link?
Enviat des del meu ONEPLUS A3003 usant Tapatalk
neo_bpm said:
Anyone have the OTA for 3T download link?
Enviat des del meu ONEPLUS A3003 usant Tapatalk
Click to expand...
Click to collapse
Hi,
if you want the small ota (for flashing with stock recovery) better try a vpn (like opera vpn), select germany or canada and do the update
I know, but I preffer the OTA link, never used VPN.
Enviat des del meu ONEPLUS A3003 usant Tapatalk
luptatorul said:
If i am on 4.1.6, rooted, can i dirty flash the full 4.1.7 zip WITHOUT facing any kind of issue?
Click to expand...
Click to collapse
Can somebody answer this, please? Thanks!
Has anyone else seen this splash screen, while looking for the update in the settings app? Does this mean I am downloading the full update and can flash this with the installed TWRP recovery? The file I'm downloading right now is about 1,4 GB...
luptatorul said:
Can somebody answer this, please? Thanks!
Click to expand...
Click to collapse
Yes you can....
Wipe dalvick & cache ...Flash ROM ..flash supersu or magisk..
Reboot to system....
The md5 hash of this file I mentioned in my last post is
4d069992e59251c6e0ef1924d85ce074
The full name is
OnePlus3TOxygen_28_OTA_055_all_1708211842_d9d28.zip
File size as displayed in TotalCommander is exactely
1.533.748.836 B (1.4 G)
And the file is located in
/storage/emulated/0/.Ota
I have seen the download which is available via mega.nz. If you would like to check, you can take a look if file name, file size and md5 hash are matching with my observations.