"bad key" on startup after unlocking bootloader Qualcomm Moto E4 - Moto E4 Questions & Answers

I unlocked my bootloader recently and now when I start up the phone it displays the text "bad key" for a few seconds before booting up. What is the cause of this message and how can I get a normal startup message to appear?

The cause is you unlocked the bootloader...it is normal. Being able to flash a new logo.bin has been an elusive task. I started a thread here about it. So far, no success.

mikaleee said:
I unlocked my bootloader recently and now when I start up the phone it displays the text "bad key" for a few seconds before booting up. What is the cause of this message and how can I get a normal startup message to appear?
Click to expand...
Click to collapse
Did you do the verity check (it should change to N/A)

SykkNyzz said:
Did you do the verity check (it should change to N/A)
Click to expand...
Click to collapse
No how do I do that please?

mikaleee said:
No how do I do that please?
Click to expand...
Click to collapse
Where ever you were following the instructions to be rooted. One of the following there should have it

Related

Nexus 10 stuck in boot loop.. please help!!!

So, I was using Zedomax's how to root N10 tutorial (http://www.youtube.com/watch?feature=player_embedded&v=wVlI-gWppCA#at=261)... I had everything working fine up until about 4:15 in the video when his restarts mine just gets stuck in boot loop and displays the nexus bootloader for an unlimited amount of time. My device does however show that it is unlocked because when I go back through the process it says it is already unlocked as you can see in the pictures. the first is the cmd I used and the second is what the N10 shows after "fastboot oem unlock"... I am completely lost and have tried over and over to find the problem... I have tried to unroot and restore but I cant even find a working file that isnt malicious... ANY AND ALL HELP OR SUGGESTIONS WOULD BE APPRECIATED...
Andrololol said:
So, I was using Zedomax's how to root N10 tutorial (http://www.youtube.com/watch?feature=player_embedded&v=wVlI-gWppCA#at=261)... I had everything working fine up until about 4:15 in the video when his restarts mine just gets stuck in boot loop and displays the nexus bootloader for an unlimited amount of time. My device does however show that it is unlocked because when I go back through the process it says it is already unlocked as you can see in the pictures. the first is the cmd I used and the second is what the N10 shows after "fastboot oem unlock"... I am completely lost and have tried over and over to find the problem... I have tried to unroot and restore but I cant even find a working file that isnt malicious... ANY AND ALL HELP OR SUGGESTIONS WOULD BE APPRECIATED...
Click to expand...
Click to collapse
I can help you get back to stock, that should fix everything. You will erase everything and have to start whatever you were working on again. So back it up before hand if you can.
So first you need to be sure you have TODAYS latest updates to the fastboot.exe program, do this by installing the SDK from Google, then launching the update manager and doing all updates. See this post:
http://forum.xda-developers.com/showpost.php?p=38961605&postcount=5
Then you need to do what styckx says. Be sure to click 'Thanks' under his posts. The only thing that you may find is hard to understand is, if you download that from Google and it end up as .tar you have to rename it to .tgz to have it extract correclty. See this post:
http://forum.xda-developers.com/showpost.php?p=38091931&postcount=210
EDIT - If you did oem unlock and were stuck at the X bootlogo then there is an easier fix than what I describe. You state you are stuck at bootloader. Just FYI
Good luck!
bigmatty said:
I can help you get back to stock, that should fix everything. You will erase everything and have to start whatever you were working on again. So back it up before hand if you can.
So first you need to be sure you have TODAYS latest updates to the fastboot.exe program, do this by installing the SDK from Google, then launching the update manager and doing all updates. See this post:
http://forum.xda-developers.com/showpost.php?p=38961605&postcount=5
Then you need to do what styckx says. Be sure to click 'Thanks' under his posts. The only thing that you may find is hard to understand is, if you download that from Google and it end up as .tar you have to rename it to .tgz to have it extract correclty. See this post:
http://forum.xda-developers.com/showpost.php?p=38091931&postcount=210
EDIT - If you did oem unlock and were stuck at the X bootlogo then there is an easier fix than what I describe. You state you are stuck at bootloader. Just FYI
Good luck!
Click to expand...
Click to collapse
yes, it is stuck at nexus symbol "X" loading screen.. you say there is an easier fix for that?
Andrololol said:
yes, it is stuck at nexus symbol "X" loading screen.. you say there is an easier fix for that?
Click to expand...
Click to collapse
yes. that is common w/ these after oem unlock. on that fastboot screen you posted, the one you get to by holding the certain key sequence at boot - use the volume keys to select Recovery, then use the start button to boot to that mode. This confuses people because at that point it looks broken - all you see is a triangle with an error X in it (or something like that.) BUT from that screen you access another menu, do this by briefly pressing power volume up and volume down in little spurts. it sounds wierd, but you do that for up to 20 seconds and you'll finally get it. its just hard to enter so you have to do it like that otherwise you go crazy trying. once you've accessed that menu you will know because its all text. using the navigation choose 'factory wipe' and wipe it. after that your N10 will boot like normal. be aware - navigation on that text only menu is tricky.

Your device is corrupt and cannot be checked for corruption.

Is this triggered by the bootloader unlock? And can I just ignore it? Is their something I must do?
http://forum.xda-developers.com/nexus-6p/help/device-corrupt-trusted-properly-t3274624
http://forum.xda-developers.com/nexus-6p/help/device-corrupt-trusted-properly-visit-li-t3275025
I had the message and couldn't boot up at all. I was forced to flash back to stock and redo the whole process. The message was gone the second time around.
Krooked22 said:
Is this triggered by the bootloader unlock? And can I just ignore it? Is their something I must do?
Click to expand...
Click to collapse
You are talking about just the normal message about checking for corruption and re locking your bootloader, press power to pause, etc. Cause that screen is normal.
Here is a link to a page with what the 3 warning levels mean.
https://support.google.com/nexus/answer/6185381?p=verified_boot&rd=1

Unlocked MOTO G4 PLUS

Can someone help me please?
I unlocked my G4 PLUS and installed CM14, but when i restarted, only appeared the message "Your device Has Been unlocked and can not be trusted.
To learn more (...)
(...) Your device will boot in 5 seconds. " But not out of it. I can not restart, or go into recovery mode. Somebody help me, please!
rafaelmoreira07 said:
Can someone help me please?
I unlocked my G4 PLUS and installed CM14, but when i restarted, only appeared the message "Your device Has Been unlocked and can not be trusted.
To learn more (...)
(...) Your device will boot in 5 seconds. " But not out of it. I can not restart, or go into recovery mode. Somebody help me, please!
Click to expand...
Click to collapse
That is how it looks for everyone. Then you change that screen to something else that you like more. There are l
I have not figured out how to skip the 5 seconds though. I can't find where i found my solution but there are plenty around. Custom boot animation is what you are looking for.
rafaelmoreira07 said:
Can someone help me please?
I unlocked my G4 PLUS and installed CM14, but when i restarted, only appeared the message "Your device Has Been unlocked and can not be trusted.
To learn more (...)
(...) Your device will boot in 5 seconds. " But not out of it. I can not restart, or go into recovery mode. Somebody help me, please!
Click to expand...
Click to collapse
jus a warning message usually appears....no need to worry about that...jus flash stock firmware....and done !
when stuck at that screen jus hold ur power button for few secs screen will go off then start the bootloader and navigate to recovery
Why are you sending him to another site when a tutorial is posted here?
http://forum.xda-developers.com/moto-g4-plus/themes/customized-logo-t3451349

Bootloader Screen Everytime

Sorry bad english. I have a Motorola X Style XT1572 Brazil, I rooted it once and now I am back to stock rom and it always go to bootloader screen and I dont know how to get off it.
Plus it had update to software but when it tried to update it goes to 12% and reboot to bootloader, back to 0% again and repeating about 5x and got a error that cannot update. I downloaded here the 6.0 marshmallow Latin America DS stock rom, also have the warning back everytime of unlocked bootloader.
Thx for attention and helping =)
Run "fastboot oem fb_mode_clear" using Command Prompt (Windows) or Terminal (Linux/OS X) then reboot the phone.
Spasticdroid said:
Run "fastboot oem fb_mode_clear" using Command Prompt (Windows) or Terminal (Linux/OS X) then reboot the phone.
Click to expand...
Click to collapse
I will try that. That will remove the bootloader screen right?
How do I remove the warning of unlocked bootloader too?
Thx for the attention, =)
2006goto said:
I will try that. That will remove the bootloader screen right?
How do I remove the warning of unlocked bootloader too?
Thx for the attention, =)
Click to expand...
Click to collapse
fastboot oem fb_mode_clear takes the bootloader out of fastboot flashing mode, turning it on is the first step in flashing a stock ROM, but sometimes it seems to just happen... This will cause the bootloader NOT to pop-up on reboot/startup.
The bootloader unlocked screen will ALWAYS be there, forever, including the delay and vibration... You can hide it with a custom logo screen or the stock, patched logo image (look around, it's posted here)
Note you will never be able to hide the fact the bootloader was unlocked, if anyone who knows anything just starts the bootloader it will show a Status of 2, meaning relocked. That is NOT possible to be changed or hidden, and it cannot go back to a 0 (locked). Fastboot getvar all will always show the truth too.
acejavelin said:
fastboot oem fb_mode_clear takes the bootloader out of fastboot flashing mode, turning it on is the first step in flashing a stock ROM, but sometimes it seems to just happen... This will cause the bootloader NOT to pop-up on reboot/startup.
The bootloader unlocked screen will ALWAYS be there, forever, including the delay and vibration... You can hide it with a custom logo screen or the stock, patched logo image (look around, it's posted here)
Note you will never be able to hide the fact the bootloader was unlocked, if anyone who knows anything just starts the bootloader it will show a Status of 2, meaning relocked. That is NOT possible to be changed or hidden, and it cannot go back to a 0 (locked). Fastboot getvar all will always show the truth too.
Click to expand...
Click to collapse
Hum... But I know there is some way to hide, just to no show that horrible white screen at starting...
2006goto said:
Hum... But I know there is some way to hide, just to no show that horrible white screen at starting...
Click to expand...
Click to collapse
Read my post again... Flash the patched logo.
The unlock screen and status are still there, just hidden.

Bricked Essential Phone by Regular Update 20180107

Anyone get bricked from the last update (I assume January/December security updates). I tried to update my phone yesterday 1/7/2018. My phone basically downloaded everything, told me to restart, loaded into the bootloader 3 times - after i selected normal Boot, and then stopped and charging.
Pretty glad that I had 2 phones.. because I have a video of it bricking in front of my eyes. not sure if I can post links yet.
Any help would be reallly appreciated as I haven't modified anything on it...
Can you still boot into recovery?
neokwlx said:
Anyone get bricked from the last update (I assume January/December security updates). I tried to update my phone yesterday 1/7/2018. My phone basically downloaded everything, told me to restart, loaded into the bootloader 3 times - after i selected normal Boot, and then stopped and charging.
Pretty glad that I had 2 phones.. because I have a video of it bricking in front of my eyes. not sure if I can post links yet.
Any help would be reallly appreciated as I haven't modified anything on it...
Click to expand...
Click to collapse
try to wipe your data fastboot -w or with stock recovery
This video is the last time I could get the phone to turn on. The only signs of life I (saw) on the phone was the LED light when I tried to charge the phone -
after it ran out of battery.
https://photos.app.goo.gl/XaD1W5CUmMpV9U9w2
The screen won't turn on or off. It's like the power button's broken even though it's still pressable. It should have battery though because I've been trying to turn it on with it plugged in.
neokwlx said:
The screen won't turn on or off. It's like the power button's broken even though it's still pressable. It should have battery though because I've been trying to turn it on with it plugged in.
Click to expand...
Click to collapse
ok maybe try power on with volume down
nicoconepala said:
ok maybe try power on with volume down
Click to expand...
Click to collapse
None of these combinations worked. (Held them for at least 3 seconds each)
Power+Up
Power + Down
Power+UP+DOWN
Up+down
neokwlx said:
None of these combinations worked. (Held them for at least 3 seconds each)
Power+Up
Power + Down
Power+UP+DOWN
Up+down
Click to expand...
Click to collapse
Try them for 45 seconds.
Sent from my PH-1 using XDA Labs
avd said:
Try them for 45 seconds.
Sent from my PH-1 using XDA Labs
Click to expand...
Click to collapse
Thanks! It turned on after Vol Down+Power (10 seconds).
Unfortunately every menu option from FastBoot Mode proceeds to black screen
-Start
-Recovery Mode
-Restart bootloader
-Power Off
Got it to work with flash unlock in the bootloader menu! Thanks for the advice everyone!
neokwlx said:
Got it to work with flash unlock in the bootloader menu! Thanks for the advice everyone!
Click to expand...
Click to collapse
glad for you ?
How?
neokwlx said:
Got it to work with flash unlock in the bootloader menu! Thanks for the advice everyone!
Click to expand...
Click to collapse
Can you please tell me how exactly you did this? via command line fastboot?
I can't select anything in the boot loader menu, just like you all options show a black screen. Can't do anything.
Please help!
Essential Phone stuck in Start up screen with Locked Boot loader
Essential Phone stuck in Start up screen with Locked Boot loader, need help to get it back on. Is there a way around to unlock the boot loader from Fast Boot ?
[email protected] said:
Essential Phone stuck in Start up screen with Locked Boot loader, need help to get it back on. Is there a way around to unlock the boot loader from Fast Boot ?
Click to expand...
Click to collapse
You will need to side load the OTA.
You cannot unlock the boot loader unless you check OEM unlock in the developer menu.
Or, at least I have not seen it done.
tech_head said:
You will need to side load the OTA.
You cannot unlock the boot loader unless you check OEM unlock in the developer menu.
Or, at least I have not seen it done.
Click to expand...
Click to collapse
OEM unlocking is ticked off. That's the issue. I've seen in some videos or posts like Chris Paton. Advising to relocate the bootloader after sideloading the beta OTA's... I followed it and now I'm in a soup.
[email protected] said:
Essential Phone stuck in Start up screen with Locked Boot loader, need help to get it back on. Is there a way around to unlock the boot loader from Fast Boot ?
Click to expand...
Click to collapse
try to wipe all user data and reflash the stock ROM through command line..i don 't know if you want to keep your data or just make the phone work
panossd said:
try to wipe all user data and reflash the stock ROM through command line..i don 't know if you want to keep your data or just make the phone work
Click to expand...
Click to collapse
I don't min wiping it off... But I'm unable to access those commands as my Boot loader is locked and OEM Unlocking is not toggled on. Let me know of there is anything I can do in such case.
[email protected] said:
I don't min wiping it off... But I'm unable to access those commands as my Boot loader is locked and OEM Unlocking is not toggled on. Let me know of there is anything I can do in such case.
Click to expand...
Click to collapse
Can u get the phone in fastboot mode??? Try to install lineage os (twrp etc. )
panossd said:
Can u get the phone in fastboot mode??? Try to install lineage os (twrp etc. )
Click to expand...
Click to collapse
Fastboot Mode - YES. But it isn't accepting any commands from there.
[email protected] said:
Fastboot Mode - YES. But it isn't accepting any commands from there.
Click to expand...
Click to collapse
Does your PC sees the phone when in fastboot mode?

Categories

Resources