My Wifi and bluetooth can't turn on after I flashed Resurrection Remix. Now I have reverted back to OOS 3.6.0. DO you guys have a modem file for OOS 3.6.0? A2003
ashwinj888 said:
My Wifi and bluetooth can't turn on after I flashed Resurrection Remix. Now I have reverted back to OOS 3.6.0. DO you guys have a modem file for OOS 3.6.0? A2003
Click to expand...
Click to collapse
U can flash second method from here; https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
It reverts every back to stock like u now bought ur device. I've done this already.
Sent from my ONE A2005 using Tapatalk
I've already used this method to revert my phone back. wifi still not working
Related
After testing MM build, WiFi will not work on stock 5.1.1 build. I've tried TWRP Restore, I've tried "Return-to-stock-Tool", and I've tried XT1575 "Pure" Stock Unrooted TWRP backup found in Development section.
In settings --> Wifi --> flip WiFi switch and it turns on and right back off. This is only happing in Stock 5.1.1 build.
WiFi works fine in AICP ROM...
Any suggestions?
Thanks in advance.
Have you made sure to flash back the original modem from 5.1.1. If you still have MM modem then it definitely won't work on lollipop
timde9 said:
Have you made sure to flash back the original modem from 5.1.1. If you still have MM modem then it definitely won't work on lollipop
Click to expand...
Click to collapse
Using the "Return-to-stock-Tool" would flash the 5.1.1 modem, wouldn't it?
DJTeeJay said:
Using the "Return-to-stock-Tool" would flash the 5.1.1 modem, wouldn't it?
Click to expand...
Click to collapse
You need to flash the modem again after you flash the "Restore-to-Stock-Tool"
You will find the modem in the Tool folder (NON-HLOS.bin)
spencer92a said:
You need to flash the modem again after you flash the "Restore-to-Stock-Tool"
You will find the modem in the Tool folder (NON-HLOS.bin)
Click to expand...
Click to collapse
Worked after a few tries. Thanks!
That file has been a real problem. It says it flashes OK but really doesn't. Have Me fits in upgrading.
The accelerometer of my Z1 isn't working for some reason which means that the screen wont rotate.
My phone had COS installed when I bought it. Yesterday I wanted to have a taste of Marshmallow and flashed ZUI. I didn't like the feel of it, though, and went back to COS.
And that's when the G sensor started acting up. Everything else seems to work.
I'm aware that some people were previously having issues with screen rotation but that bug was fixed in the latest update (12.1-YOG4PAS7DF).
Any ideas?
EDIT: Also, the manual G sensor calibration won't work.
did you flashed zui with qfil?
Sent from my Z1 using XDA-Developers mobile app
t.h.i said:
did you flashed zui with qfil?
Sent from my Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah, I flashed ZUI via QFIL. It was the Marshmallow version, I think. I converted back to COS with the method by PaulOBrien:
http://www.modaco.com/forums/topic/375804-convert-z1-from-zukui-to-cyanogen-os/ (with the exception that I flashed the converter file via TWRP)
After that I did a factory reset and flashed the latest COS image in Cyanogen Recovery.
i had the same problem.
i think it because the downgrade.
what i did is flash cos 12.1 via qfil (like you flash zui). http://4pda.ru/forum/index.php?showtopic=701320&st=1320#entry46208060
Sent from my Z1 using XDA-Developers mobile app
i had the same problem , but i used twrp to flash zui and downgrade into cos
t.h.i said:
i had the same problem.
i think it because the downgrade.
what i did is flash cos 12.1 via qfil (like you flash zui). http://4pda.ru/forum/index.php?showtopic=701320&st=1320#entry46208060
Sent from my Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yup, flashing COS via QFIL fixed it. Thank you so much!
Last night one of my friend told me about this. So i tried and found it working. All credits to him for discovering this, i am just sharing.
HIS MIUI TOPIC IS HERE Go and support him.
He has posted fastboot method there that is a bit simpler, use that if you like. Here i have posted recovery flash-able zip.
Things required:
1. Redmi note 3 with bootloader unlock and TWRP recovery
2. Any Marshmallow MIUI rom
3. Firmware zip
Steps:
1. Unlock bootloader officially/unofficially and flash twrp by fastboot.
2. Download the firmware zip and rom and place them in internal/external sd.
3. Flash the firmware zip first and then the rom.
4. Reboot.
Videos:
Proof of working VoLTEVideo link
is it working on rr rom also??
ruhul5 said:
is it working on rr rom also??
Click to expand...
Click to collapse
Came here to post this:
Few more links from that thread.
https://www.androidfilehost.com/?fid=24588232905724048
https://drive.google.com/file/d/0B5m7FkeljEJ1OVpCa3dRbTFGcFU/view?pref=2&pli=1
Put your phone in fastboot mode, then connect your device and Run Flash.bat
BTW: As per the original posted: This will work on MIUI ROMS tested in Beta MM version, EPIC MM and Ported MM from Kate, and I guess this should work on AOSP roms since the modem files are from AOSP base, this fix won't work with CM13 ROMS since the base is different and we are working on it to fix, so stay tuned!!
ruhul5 said:
is it working on rr rom also??
Click to expand...
Click to collapse
No.
naturist said:
Came here to post this:
Few more links from that thread.
https://www.androidfilehost.com/?fid=24588232905724048
https://drive.google.com/file/d/0B5m7FkeljEJ1OVpCa3dRbTFGcFU/view?pref=2&pli=1
Put your phone in fastboot mode, then connect your device and Run Flash.bat
BTW: As per the original posted: This will work on MIUI ROMS tested in Beta MM version, EPIC MM and Ported MM from Kate, and I guess this should work on AOSP roms since the modem files are from AOSP base, this fix won't work with CM13 ROMS since the base is different and we are working on it to fix, so stay tuned!!
Click to expand...
Click to collapse
I don't have permission to share his files or text so didn't posted the links and content.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Sudeep Duhoon said:
No.
I don't have permission to share his files or text so didn't posted the links and content.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
Is this working with slim aosp based rom
Not working for me...
I flashed firmware.zip then rom and then lazyflasher zip to decrypt boot.img without wiping anything
This will not work. Firmware files aren't same from original zip files in MIUI Forum thread and as you can see, only needed to flash Modem + DSP file and not entire firmware-update folder. To get this fix working you need 5.1.1 Modem and my modded adspso.bin. Raaj52 said that this files are from 6.0 AOSP but if you look into new replies, he said this is 5.1.1 modem and I modded adspso.bin file to get working 5.1.1 Modem in 6.0.1 without fluence and video recording issues.
andersonaragao said:
This will not work. Firmware files aren't same from original zip files in MIUI Forum thread and as you can see, only needed to flash Modem + DSP file and not entire firmware-update folder. To get this fix working you need 5.1.1 Modem and my modded adspso.bin. Raaj52 said that this files are from 6.0 AOSP but if you look into new replies, he said this is 5.1.1 modem and I modded adspso.bin file to get working 5.1.1 Modem in 6.0.1 without fluence and video recording issues.
Click to expand...
Click to collapse
This IS working as shown in the video. I don't care about your reply, post only if you have tested it and found not working and I may look into the matter.
I was on miui 8 lp and what I did was flashed cm firmware the aosp modem. Didn't worked. Flash whole firmware. And got volte working. Tested with epic rom and jio sim. As shown in the video.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Aadeep said:
Not working for me...
I flashed firmware.zip then rom and then lazyflasher zip to decrypt boot.img without wiping anything
Click to expand...
Click to collapse
Flashed which rom and on which rom?
Sent from my Redmi Note 3 using XDA-Developers mobile app
Sudeep Duhoon said:
This IS working as shown in the video. I don't care about your reply, post only if you have tested it and found not working and I may look into the matter.
I was on miui 8 lp and what I did was flashed cm firmware the aosp modem. Didn't worked. Flash whole firmware. And got volte working. Tested with epic rom and jio sim. As shown in the video.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
Ok! ahhahahahhaaaha
I just want to warn users that will flash it!
Edit: btw, downloaded and flashed it and I can confirm. It doesn't work.
andersonaragao said:
Ok! ahhahahahhaaaha
I just want to warn users that will flash it!
Edit: btw, downloaded and flashed it and I can confirm. It doesn't work.
Click to expand...
Click to collapse
Did worked for me somehow (clean flash). Weird. :/
Which rom you tested?
Sent from my Redmi Note 3 using XDA-Developers mobile app
Sudeep Duhoon said:
Did worked for me somehow (clean flash). Weird. :/
Which rom you tested?
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
6.8.30 Global MM ROM.
Will this work on Exodus ?
Is there some changes? VoLTE worked well in 6.7.21 and other versions..
Sent from my mobile device
Volte is already working well in latest MIUI build... did i miss anything...?
andersonaragao said:
6.8.30 Global MM ROM.
Click to expand...
Click to collapse
The one that encrypt data?
OK I will try to test on that my self.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Arifcatalyst said:
Will this work on Exodus ?
Click to expand...
Click to collapse
No. Only miui.
mGforCe said:
Is there some changes? VoLTE worked well in 6.7.21 and other versions..
Sent from my mobile device
Click to expand...
Click to collapse
6.7.21 marshmallow?
c_/\/\_k said:
Volte is already working well in latest MIUI build... did i miss anything...?
Click to expand...
Click to collapse
This is for marshmallow builds. The beta ones or the epic rom (ported from kate)
Sent from my Redmi Note 3 using XDA-Developers mobile app
is it working on Official CM13? did you check?
shree alwaz said:
is it working on Official CM13? did you check?
Click to expand...
Click to collapse
This is only for MM MIUI build not for CM13 based ROMs
Any CM13 ROM supporting VOLTE?
My device ( one plus 2) takes more than 12hrs to charge fully.I use stock charging adapter and cable.I have checked using wall outlet,power bank and usb port ,but nothing seems to change.I'm using oxygen 3.5.6 ROM currently.I'm facing this problem since oxygen 3.0.2 ROM
Before I received OTA for 3.0.2 ,I was using beta version of oxygen to experience the marshmallow features.During beta ROM I didn't have these problems.
I'm sure that there is no prob with charger,cable or battery.I wanted to know whether the prob is with the ROM or kernel?
Yep... It's the ROM kernel.?
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Yep... It's the ROM kernel.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Pls provide instructions for flashing kernel and pls tell me where to download STOCK kernel
niranjan v bharadwaj said:
Pls provide instructions for flashing kernel and pls tell me where to download STOCK kernel
Click to expand...
Click to collapse
Well I assume u are not rooted and have twrp installed so the only best thing is to download and flash the OOS 3.5.6 zip through ur stock recovery. So check out this http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.5.6/
Take backup before proceeding.
Note: Check out this guide on how to unlock bootloader before following above just in case of bootloop
https://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Well I assume u are not rooted and have twrp installed so the only best thing is to download and flash the OOS 3.5.6 zip through ur stock recovery. So check out this http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.5.6/
Take backup before proceeding.
Note: Check out this guide on how to unlock bootloader before following above just in case of bootloop
https://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Thank you Brandon,I will try this and let you know.
Cannot install OxygenOS using Twrp. Currently running Resurrection Remix 5.8.3.
But VOLTE doesn't work. I really need Volte working because i use two sims, so when i need to switch on data from the other sim(SIM Slot 2). The Primary SIM gets switched off automatically.
Any kind of Assistance is appreciable.
Thank You
oneplu2 said:
Cannot install OxygenOS using Twrp. Currently running Resurrection Remix 5.8.3.
But VOLTE doesn't work. I really need Volte working because i use two sims, so when i need to switch on data from the other sim(SIM Slot 2). The Primary SIM gets switched off automatically.
Any kind of Assistance is appreciable.
Thank You
Click to expand...
Click to collapse
If you don't set jio as your primary data sim, it loses network. This happens on every dual sim phone. Also, try flashing OOS 3.5.8 and then try using custom roms.
utkarsh102 said:
If you don't set jio as your primary data sim, it loses network. This happens on every dual sim phone. Also, try flashing OOS 3.5.8 and then try using custom roms.
Click to expand...
Click to collapse
I tried flashing OOS 3.5.8 using twrp 3.1.0. But i can't install it. That's where i need help.:crying:
oneplu2 said:
I tried flashing OOS 3.5.8 using twrp 3.1.0. But i can't install it. That's where i need help.:crying:
Click to expand...
Click to collapse
Did you try the hybrid recovery?
utkarsh102 said:
Did you try the hybrid recovery?
Click to expand...
Click to collapse
Nope. I tried only Twrp and clock work mod. I'll try hybrid then. Will it work?
oneplu2 said:
Nope. I tried only Twrp and clock work mod. I'll try hybrid then. Will it work?
Click to expand...
Click to collapse
If you want to install oxygen os then you should use hybrid
utkarsh102 said:
If you want to install oxygen os then you should use hybrid
Click to expand...
Click to collapse
Nope Again. Hybrid didn't work. I tried Hybrid V3.4. OOS couldn't be installed.
oneplu2 said:
Nope Again. Hybrid didn't work. I tried Hybrid V3.4. OOS couldn't be installed.
Click to expand...
Click to collapse
What is the issue?
i installed the OOS 3.5.8 via TWRP 3.1.0, no problem with the installation, but after that i dont get LTE at all, only 3G or H+...
oneplu2 said:
Cannot install OxygenOS using Twrp. Currently running Resurrection Remix 5.8.3.
But VOLTE doesn't work. I really need Volte working because i use two sims, so when i need to switch on data from the other sim(SIM Slot 2). The Primary SIM gets switched off automatically.
Any kind of Assistance is appreciable.
Thank You
Click to expand...
Click to collapse
Try flashing just the firmware of OOS 3.5.8. Link is in my signature.
jason_ma said:
i installed the OOS 3.5.8 via TWRP 3.1.0, no problem with the installation, but after that i dont get LTE at all, only 3G or H+...
Click to expand...
Click to collapse
Try using hybrid recovery
jason_ma said:
i installed the OOS 3.5.8 via TWRP 3.1.0, no problem with the installation, but after that i dont get LTE at all, only 3G or H+...
Click to expand...
Click to collapse
Make sure you have the volte sim in SLOT1 and in settings, sim card, enhanced lte switched on...
Sent from my OnePlus 2 using XDA Labs