Related
Just ran into a problem which took me some time to solve. Thought I would share it to save other people some frustration.
After an adb reboot the i5800 got stuck in "modem" mode. i.e. android booted fine but gave a modem and a serial port over usb rather than adb. Reboots did not solve the problem.
The solution is to enter recovery screen:
reboot recovery
OR
press proper buttons to get into recovery mode
And then perform a reboot from there
Is this the same as *#7284# and selecting "PDA" on UART and USB, or just on USB? Or is this a completely separate thing?
miki.antena said:
Is this the same as *#7284# and selecting "PDA" on UART and USB, or just on USB? Or is this a completely separate thing?
Click to expand...
Click to collapse
Thanks so much for this!!!! After helping hack a friends build.prop to enable Apparatus compatibility in the Market, I found USB wasn't working properly anymore. Resetting changes in the phone didn't help (I had to do this via the phone terminal) although I at least managed to buy Apparatus before the sale ended.
After initially getting confused due to a lack of drivers and the occasional 'nH' showing up devices without drivers which made me think something was borked, I worked out from the VID & PID it was just the lack of drivers making (well I'm not sure why it did the 'nH' sometimes it got serial something instead), once I installed the drivers all was fine.
Except still mass storage wasn't showing and the Samsung connect manager didn't show up on my phone when I connected USB, nor did ADB work at all. In fact, it didn't even show up in the phone menu as debugging mode if I didn't start phone with it connected (or something like that). Funnily enough when I did get it the debugging to show up I did get the USB mass storage to show up in the phone, but it didn't help (it just unmounted the card which I think is all it ever does).
Anyway after a bit more fooling around I eventuall came across http://forum.xda-developers.com/showthread.php?t=1215103 and the stuff about modem and mkasick's post which sounded a lot like it could be my problem. The code for that Samsung phone didn't work so I searched for the 5800 and came across this giving me the right code. Sure enough UART (but not USB) was set to modem instead of PDA. I was unsure whether that was wrong but changed it anyway and yep that fixed it!
I still have no idea what went wrong. I had thought may be the phone didn't like me rebooting via ADB but I've now done that several times. In fact most of the stuff except install a superuser update has been more or less repeated. I guess it was just some strange rare occurence that it somehow got changed. I did have to reconnect the USB while working the first time, not sure why but ADB lost connection then I found couldn't connect. Perhaps that's somehow related. Now that I know what to do, it's trivial but very annoying when I didn't. I still don't get why Samsung decided to make the connect manager (my phone doesn't have that) only to have some hidden option where it can be set to modem or USB.
Partially because of this, I never got to get Tilestorm HD become compatible in time for the sale although my friend wasn't so interested in that. (Eventually I worked out using the THC Tattoo modded market which reports a fake resolution enables it. Well, I also modified the build.prop but I don't know if that was necessary. I wasn't able to do it solely by the build.prop. But it was way too late by then to buy Tilestorm HD cheap.)
Nil Einne said:
I still have no idea what went wrong. I had thought may be the phone didn't like me rebooting via ADB but I've now done that several times.
Click to expand...
Click to collapse
This may sound like crazy idea, but is your USB port/connector clean?
(The USB port allows for dozens of different phone functions when using very specific resistance between data pins.)
i bought a LG D802 32gb last night as i was using a 16 gb before i wanted to flash cloudy g3.. so i tried to install custome recovery twrp...
now i am in fast boot mode..
it says :
[880]fastboot mode started
[910]udc_start()
when i attach usb cable
[1100]-reset-
[1110]-portchange-
[1120]-reset-
[1130]-portchange-
[1140]-fastboot: processing commands
i tried holding volume + and and attaching the usb cable but no luck ... so now i have NO RECOVERY, NO DOWNLOAD MODE, AND MY WINDOWS PICKING UP MY PHONE AS "USB MODEM PHONE ADB PORT"
please help
Hi, background is this..
I have a D802-10C G2 that i rooted the stock 4.2.2 rom a while back using the post chinese method. Easy enough, all worked fine. no complaints. A couple of weeks ago i got offered the OTA 4.4 update, this failed due to the root. I then removed the root using the feature in super su. that seems to have worked as no apps or file managers etc could get root access. However, the OTA still wont work.
Now my problem is my phone will no longer be recognized by any operating system, on multiple computers. I have tried many ADB drivers, Windows 7 wont even detect the device, i've used every PC connect mode, USB debugging. However always the same result, it's as if i'm plugging in a blank usb cable into the computer. Nothing at all.
The only thing that does happen when i connect the phone to a computer is the phone starts to trickle charge. There is nothing detected in Device Manager in Windows 7 I've tried connecting in download mode, nothing. I've tried the LG support tool, PC sync. Nothing.
WiFi does connect to the PC suite fine BTW and other than that the phone is working perfectly. I've also tried connecting multiple usb cables on multiple ports.
I haven't been able to find a single case of the same problem in the week or so i've been looking. Hoping someone can help, i'm thinking i may have soft bricked my phone. I really do not think this is a driver issue.
Any help would be great. cheers
Paul
+1
i have the same problem plz help
cambies said:
Hi, background is this..
I have a D802-10C G2 that i rooted the stock 4.2.2 rom a while back using the post chinese method. Easy enough, all worked fine. no complaints. A couple of weeks ago i got offered the OTA 4.4 update, this failed due to the root. I then removed the root using the feature in super su. that seems to have worked as no apps or file managers etc could get root access. However, the OTA still wont work.
Now my problem is my phone will no longer be recognized by any operating system, on multiple computers. I have tried many ADB drivers, Windows 7 wont even detect the device, i've used every PC connect mode, USB debugging. However always the same result, it's as if i'm plugging in a blank usb cable into the computer. Nothing at all.
The only thing that does happen when i connect the phone to a computer is the phone starts to trickle charge. There is nothing detected in Device Manager in Windows 7 I've tried connecting in download mode, nothing. I've tried the LG support tool, PC sync. Nothing.
WiFi does connect to the PC suite fine BTW and other than that the phone is working perfectly. I've also tried connecting multiple usb cables on multiple ports.
I haven't been able to find a single case of the same problem in the week or so i've been looking. Hoping someone can help, i'm thinking i may have soft bricked my phone. I really do not think this is a driver issue.
Any help would be great. cheers
Paul
Click to expand...
Click to collapse
YOu can try checking the device manager or use other USB port on your phone.
buenarc said:
YOu can try checking the device manager or use other USB port on your phone.
Click to expand...
Click to collapse
The problem is not like the usual ones you will see about "computer not being able to see device" I don't think it's a driver or software issue, or if it is it's unlike any i have found in the weeks i've been searching the net for a solution. Here's why....
When i connect the phone to Windows 7 and 8 ( on 3 different computers) No hardware is detected, nothing in the Device Manager, no yellow question marks indicating 'Unknown Hardware'. Nothing, all it does is start trickle charging.
Now even with no ADB, or any driver at all installed, the computer should still detect the phone. Mine does not.
The same thing happens using OSX and Linux Mint 16 (again multiple computers) No devices or mounted or volumes shown at all. Linux terminal command "$ lsusb" does not list my hardware.
This is why i'm pretty much convinced that there is something wrong with the USB port on the phone. Because, if Linux can't see it then surely it's a hardware problem right?
The only other thing i can think of is, i have messed up the phones firmware while trying to unroot it? but only because the timing of all this is just too uncanny.
I think i'll have to suck it up and admit defeat here. Funny thing is the phone works perfectly and charges fine.
Stuck on 4.2 , with no ADB functionality. Perhaps i'll sell it cheap to someone who doesn't care.
Cheers for the reply mate.
Same problem here!
Only my G2 is not rooted, it is still on factory OS and recently updated to 4.4.2.
I have tried on several computers, different ports and no help.
On the first connection to a PC not connected before windows reports "USB device not recognized" problem.
After that every time I connect the phone to the same computer the phone itself only recognizes that it is using USB charging mode, it does not recognize the computer connection (known by the USB ison on android system tray) even with "Ask upon connection option checked".
Even when I manualy change the Android mode in Settings --> PC Connection from MTP to PTP or even LG software, nothing happens.
Definetly there seems to be a problem with the phone, but I don't beleive it's a software but a firmware problem.
Please help if anyone knows what to do.
same thing happened after installing T-mobile rom thrugh twrp. but my device boots into fastboot and i tryed falshing :
laf.img, boot.img, aboot.img, recovery.img, laf.img
but after reboot my LS980 dissapear from device manager and stucked on LG logo.
Dont know what to do now.
I'm no expert, but given there are a lot of them here and none have weighed in on this with any ideas for a fix, i'm going to assume it's a hardware problem.
Anyone else agree? Hardware problem not software?
Cheers
I guess that you already wiped everything right? Apart from that, i'll suggest you to go to some tech supp and ask them if they can verify that each pin of the micro usb is properly working.
Sorry for my english, hope it helps!
Sent from my LG-D802 using XDA Free mobile app
I will try to check the connector although i dont think that it is a hardware issue.
BTW I can enter the download mode after flashing the mentioned partitions and i can also enter the stock LG recovery but when i do the factory reset it keeps showing Factory reset processing ... for ever
It has happened to me the same thing :crying:, and is a problem with the boot.img, if by chance your G2 version 4.4.2 and the the 4.2.2 boot.img, goodbye.
The only solution is to take it to repair a service official, there will change you the card, with the consequent change of IMEI.quent change of IMEI.
Homero2 said:
It has happened to me the same thing :crying:, and is a problem with the boot.img, if by chance your G2 version 4.4.2 and the the 4.2.2 boot.img, goodbye.
The only solution is to take it to repair a service official, there will change you the card, with the consequent change of IMEI.quent change of IMEI.
Click to expand...
Click to collapse
where are you going to repair your G2?
and how much have you paid the repair?
THANKS
Any fix for this guys i have same problem!
Here I'm getting the yellow !, any suggestion?
Sirs, I flashed the baseband (https://www.androidfilehost.com/?w=files&flid=12880) then it got working back.
solved for me
I have some kinds of that problem, let try:
Settings -> General -> PC Connection -> Select USB connection method -> Media device (MTP) (or whatever)
Got this same issue after flashing cloudy g3 rom. Then later flashing dirty unicorns, which requires jelly bean baseband. But even restoring g3 and 24a baseband, still doesn't work. No pc tethering and no on the go usb. My usb port is basically charge only.
---------- Post added at 03:58 PM ---------- Previous post was at 03:56 PM ----------
Everything else works fine...I actually never even noticed this bc I never tether to pc. But now I have to bc I want flask kdz
Help me please
someone have a solution to this problem?
My Lg G2 D803 still on boot loop (LG logo) and thats all ... no usb connection , reset factory doesnt work ...
HELP PLEASE ...
Thank you
Anyone has an idea how to fix this problem?
same problem
I have a LG G2 . recently updated from vs98027a to vs98039a 5.0 lollipop. Since the update my computer won't recognize my device in download mode and I don't have superuser ppermissions. Help plz
I also have the same problem.
It happened when I tried to backup info through LG PC Suite: the phone disconnected during the process, and now it's not recognized by any PC (http://forum.xda-developers.com/lg-g2/help/lg-g2-recognized-windows-backup-t3155323).
Also found a description of the same problem here: https://www.reddit.com/r/lgg2/comments/2urpnw/lg_g2_usb_only_charging_not_recognized_by_pc/ - no solutions, too.
Did anyone manage to fix this?
Hello XDA, my virtual phone heros, i appreciate your good work, i am reading here for a few years as a ghost and today i signed up because i am lost with a serious problem on my Note4 N910C (English is not my native language)
THE CONDITIONS AND ENVIRONMENT:
My Phone was first running on stock Lollipop 5.1.1 when i rooted it over ODIN 3.10.6 with space X kernel and CF Autoroot, SuperSU then i flashed the latest TWRP...
After that i flashed a Custom Rom: Sweet_ROM_V17.1_COJ2_N910C...
Everything was running flawlessly for about 2 weeks...I installed Titanium Backup, Xposed, Xprivacy Pro, Busybox and a lot more and made a complete TWRP Backup then, it was running like a charme...The backup is fine because when i messed up my phone through trying harder xprivacy parameters and other tweaking i needed to set it back by TWRP into the old state...
Nothing happened after that, it was running 100% for over a week of heavy usage...
THE PROBLEM:
The one morning i took it from the charger with 100% Battery and went to work...
Before the error occured I did some searching on the internet, used chats. movies, nothing special this day, USB Debugging was On, i remembered something messed up my chrome browser like this ad hijackers, i set it back by erasing data,cache of chrome in the app menu, then there was nothing else strange i remembered, my AF Firewall was closed, only Whatsapp and Browser were allowed to going through...
The same day in the afternoon i tried to use my car charger to recharge my Note 4 as usual, but this time it wasnt recognizing the charger and my first thought was that the charger is faulty or the cable, so i turned off the phone by the androids power menu...I retried loading my battery In the phones off state but when i plug in the charger, the battery symbol came up for short and then it remained dead, it s the same scenario until today, so i used my powerbank to try charging, because the powerbank has an indicator to show the loading state and everytime i plugged it in, it came up for short, battery symbol shows up for a few seconds, but no percentage or animation is showing as usual and no red LED, then its switching off, the powerbank LED indicator stops the loading state after a few seconds, so the loading current stops...
At home i tried the stock charger and it remained the same, since that, i have to charge the battery outside the phone...
The strange thing is:
The Rom is still booting fine, TWRP is booting, but its not going into download mode from Androids Power Menu like before, its always just rebooting back into android if i choose download mode and i have to take the battery out and back in and hit the download mode pattern Vol- Home Power, to enter Download Mode and even the booting into Download mode from TWRP gives the same strange results:
On my Laptop i started the device manager to see the USB hardware string parameters after a windows popup was telling me something like "Device not recognized"
The USB Driver ID dont fit the old right driver ID, it seems to be empty and the port is not communicating anymore
since the charging bug occured,( Everything worked fine the day before.)
I tried my Laptop to narrow down the bug with the same driver i used for flashing phones (S6,910F,910C) over ODIN and my Lappy has USB 2.0 and USB 3.0 ports.
I always used the same USB 2.0 port for ODIN and other MTP stuff, but since the bug showed up the 910C is not recognized at the USB 2.0 Port anymore, seems to be dead in the devices manager table, only the USB 3.0 Port shows it as unknown device with a strange empty ID --> I tried the other devices like the N910F and G920F that are still recognized by ODIN on the same USB2.0 and 3.0 Ports both with the same USB hardware strings, its just the N910C that isnt recognized anymore, in no mode, no ADB, MTP, no download mode, everywhere the same, USB is bricked! Windows finds no driver and says its no info avaiable on this device so I tried to force the right driver to run with the wrong buggy driver ID but its not communicating, ODIN indicator and log remains unchanged...So it seems to be the same situation like other people getting from killing the bootloader by bad flashing, the only difference is that my phone is still booting fine into recovery and even Android but with no charging. My USB Port is totally useless now, its like if Samsung or Google OTA update has overwritten my bootloader or something hidden in the rom that woke up to kill my mods i dont know and now.
PS: Things i tried so far with no results on fixing my issue....
1. Complete fresh reinstall of Sweetrom, 2. Flashing another kernel...
3. Roll back to my TWRP Backup of perfect running ROM but with no USB support anymore:
The Phone remains in unknown state, not affecting ODIN to switch into flash mode
I am sure its the bootloader, since its battery bug is still occuring while the phone is in off state...
Unable to tell the charger the right ID without USB communication...
i was wondering if there is a solution to make a bootloader hotflash from out of Android or something like getting me back on stock first with download mode, forcing the USB ID or communication with a tool out of android, SD card boot image like on note 3 whatever, please tell me! I cant find something related to my USB and Charging ISSUE
PLEASE HELP ME, I am lost
Still the same. It's booting fine, USB2.0 no reaction on the laptop in Fastboot/Adb/Mtp ... On USB 3.0 Device remains unknown with strange Device ID String in windows 10 hardware Manager... Forced the old formerly working driver, but Odin can't find it anymore... Adb, Mtp, fastboot don't work, no communication... USB Cid is hard bricked, Charging never works in no state, just showing up for a few seconds in off state while plugging it in for short.... Bootloader must be damaged, fastboot and twrp can be started with dead USB... So is there a way to run a boot image to fix my bootloader from SD card, Aroma, or like OTA Updates are flashing? If Samsung and Google apply bootloader updates over OTA and simply restart, why we can't do that??? I need a new bootloader, is there any way without USB?
Greetings,
Thank you for using XDA Assist.
I have moved your question to your device's Q&A forum. You'll receive expert advice here. Good luck!
Fixed!
The problem is the USB Connector Port itself, figured it out after bending the inner contacts up with a flat screwdriver and cleaned them. Before that i always tried the same gently with no change, but please do it at your own risk only. After searching for many hours about possible reasons for the problem, I came to the conclusion to even compromise the Port and heavy bending it up, now it's charging! I will exchange the port soon and change the frame too to have it back like as new... OK, if anyone in the future have problems with the bootloader or USB hardbrick n910c, feel free to ask me, I upgraded my knowledge on many causes now
Thank you very much
My 2cents stick to one charger. Do not share that charger with others.
The worst culprit are the cheap china car chargers.
I went thru two USB ports on my first phone to figure this out.
Ever since I have adopted the policy of using only one cable. Never had this issue.
Hey!
New to XDA but a complete fan of the help and guides you guys provide.
So, I acquired an i9060 smartphone and successfully installed CM 11 without the help of my laptop since the usb cable through Odin never worked for me (driver issues on Win10?).
Unfortunately, my phone entered an Android boot loop. And now with a lot of attempt I can't even enter CWM or even charge my smart phone, as it always reboots while trying to charge the battery (it's always drained) or gets stuck during logo before accessing CWM.
I tried to install Samsung drivers, Kies, ABD, Odin to restore the firmware but... nothing seems to recognise this Samsung device. Does anyone had the same problems I'm having now? Any suggestions?
You might try another USB cable, USB port, or even another computer. Without Odin, you're not going to be able to fix this since recovery is no longer available.
es0tericcha0s said:
You might try another USB cable, USB port, or even another computer. Without Odin, you're not going to be able to fix this since recovery is no longer available.
Click to expand...
Click to collapse
Tried on 3 laptops but the problem persists. Never thought of changing my usb cable though. I'll give it a shot
Btw, is there anyway to use an external SD card to force a factory reset?
n1ur0 said:
Hey!
New to XDA but a complete fan of the help and guides you guys provide.
So, I acquired an i9060 smartphone and successfully installed CM 11 without the help of my laptop since the usb cable through Odin never worked for me (driver issues on Win10?).
Unfortunately, my phone entered an Android boot loop. And now with a lot of attempt I can't even enter CWM or even charge my smart phone, as it always reboots while trying to charge the battery (it's always drained) or gets stuck during logo before accessing CWM.
I tried to install Samsung drivers, Kies, ABD, Odin to restore the firmware but... nothing seems to recognise this Samsung device. Does anyone had the same problems I'm having now? Any suggestions?
Click to expand...
Click to collapse
Have you considered the possibility that your power button is sticking? Not the part that you touch but the hardware switch behind it?
Do you have USB debugging enabled?
Are you using the stock cable or at least a USB cable with the same number of pins/pinouts?
So as the title says, I recently lost control of my phone and in a panic full wiped everything. I figured this wouldn't be such a big problem as the hardware was fine, however, I'm now realizing that without developer mode and usb debugging enabled I can't do ANYTHING. I've tried to reflash stock via adb but the device isn't recognized, likely for the above reasons. Under normal circumstances I would just plug my phone into my computer and use MTP to move a rom over, however since the default mode is USB charging and I don't have have an OS installed, it seems I can't change that.
I've been told that it's essentially impossible to brick a nexus nowadays, but I feel like I somehow managed and for the silliest reasons. . Someone please help.
Edit: I should mention that I still have access to TWRP somehow.
cri7ica1 said:
So as the title says, I recently lost control of my phone and in a panic full wiped everything. I figured this wouldn't be such a big problem as the hardware was fine, however, I'm now realizing that without developer mode and usb debugging enabled I can't do ANYTHING. I've tried to reflash stock via adb but the device isn't recognized, likely for the above reasons. Under normal circumstances I would just plug my phone into my computer and use MTP to move a rom over, however since the default mode is USB charging and I don't have have an OS installed, it seems I can't change that.
I've been told that it's essentially impossible to brick a nexus nowadays, but I feel like I somehow managed and for the silliest reasons. . Someone please help.
Edit: I should mention that I still have access to TWRP somehow.
Click to expand...
Click to collapse
While in TWRP, use ADB Sideload and install the latest OTA zip from Google:
https://developers.google.com/android/nexus/images?hl=en
Edit: How did you reflash stock? Because you should be able to do the above, ADB push, or drag and drop via TWRP. You may have to mount the file system before doing so.
Sent from my Nexus 5X using Tapatalk
cri7ica1 said:
So as the title says, I recently lost control of my phone and in a panic full wiped everything. I figured this wouldn't be such a big problem as the hardware was fine, however, I'm now realizing that without developer mode and usb debugging enabled I can't do ANYTHING. I've tried to reflash stock via adb but the device isn't recognized, likely for the above reasons. Under normal circumstances I would just plug my phone into my computer and use MTP to move a rom over, however since the default mode is USB charging and I don't have have an OS installed, it seems I can't change that.
I've been told that it's essentially impossible to brick a nexus nowadays, but I feel like I somehow managed and for the silliest reasons. . Someone please help.
Edit: I should mention that I still have access to TWRP somehow.
Click to expand...
Click to collapse
USB OTG pre-populated with a ROM maybe?