Database Users

Debranding p9 lite

How can I debrand my phone ? I mean going from C02 to C432 ?
Can anyone point out the steps needed ?
Thanks

bunilla said:
How can I debrand my phone ? I mean going from C02 to C432 ?
Can anyone point out the steps needed ?
Thanks
Click to expand...
Click to collapse
Unlock bootloader + TWRP + root + flash oeminfo of C432 + repair firmware via dload folder.

gtdaniel said:
Unlock bootloader + TWRP + root + flash oeminfo of C432 + repair firmware via dload folder.
Click to expand...
Click to collapse
which option in the toolkit should be pressed to put Oeminfo,upgrade button or individual?

gtdaniel said:
Unlock bootloader + TWRP + root + flash oeminfo of C432 + repair firmware via dload folder.
Click to expand...
Click to collapse
I have L31 and I want to debrand it from C440 to C432. I did some research, but still I have some questions.
1. Unlock bootloader + TWRP + root - I found this https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
It's ok right ?
2. Flash oeminfo of C432 and this should be done by SRKTool and oeminfo I found there https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
3. repair firmware via dload folder - Unfortunately I don't know how to do it. In the instructions for p9, it was done also in SRKTools using "Install Recovery 6.0", but there P9Lite is not mentioned, how should I do ?
4. Install new ROM - I should install new ROM for c432, right ? It's using 3 button method ?
And that's all ?

smackedRico said:
I have L31 and I want to debrand it from C440 to C432. I did some research, but still I have some questions.
3. repair firmware via dload folder - Unfortunately I don't know how to do it. In the instructions for p9, it was done also in SRKTools using "Install Recovery 6.0", but there P9Lite is not mentioned, how should I do ?
4. Install new ROM - I should install new ROM for c432, right ? It's using 3 button method ?
And that's all ?
Click to expand...
Click to collapse
Regarding <3. repair firmware via dload folder>, you have to download stock firmware for C432 (B130/131 or B160/161 - depends what oeminfo you flash),
unzip update.app and copied on dload folder on microsdcard. Power off and power on with 3 key combination and repair start...
At the end you have a brand new C432B1XX phone...

gtdaniel said:
Regarding <3. repair firmware via dload folder>, you have to download stock firmware for C432 (B130/131 or B160/161 - depends what oeminfo you flash),
unzip update.app and copied on dload folder on microsdcard. Power off and power on with 3 key combination and repair start...
At the end you have a brand new C432B1XX phone...
Click to expand...
Click to collapse
And the bootloader should be locked, right ?

smackedRico said:
And the bootloader should be locked, right ?
Click to expand...
Click to collapse
Indeed, you lose bootloader unlock, twrp and root (if you have).

If now I have c440B160, and I place oeminfo for c432 do i have to install c432b160 or I can install c432b131, because I only found that version

I installed TWRP and Root, and now I don't know how to change oeminfo, because in srk is only p9,not p9 lite, and I downloaded package .zip and tried to install it by TWRP but it didn't work. How should i do this ?

Ministry of solutions has a full tutorial, I used it and it worked flawlessly
Sent from my HUAWEI VNS-L21 using Tapatalk

Ok, thank. That worked. But now I try to update phone by using firmware finder. It finds me a lot of versions and I downloaded the newest b381 full ota, and it failed, because something was wrong in that package

What u debranded to?
Sent from my HUAWEI VNS-L21 using Tapatalk

Now i have c432b160, at least it sey so. I used the ministry of solutions oeminfo and rom.

Now I use firmware finder to find new versions, and it finds me a lot of them so I send b381 full ota to updater, it downloads, and then reboots, but it find verification error. How to fix it, i want to update to emui 5.0. Now I have C432B160

smackedRico said:
I have L31 and I want to debrand it from C440 to C432. I did some research, but still I have some questions.
1. Unlock bootloader + TWRP + root - I found this https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
It's ok right ?
2. Flash oeminfo of C432 and this should be done by SRKTool and oeminfo I found there https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
3. repair firmware via dload folder - Unfortunately I don't know how to do it. In the instructions for p9, it was done also in SRKTools using "Install Recovery 6.0", but there P9Lite is not mentioned, how should I do ?
4. Install new ROM - I should install new ROM for c432, right ? It's using 3 button method ?
And that's all ?
Click to expand...
Click to collapse
Do not debrand to c432 in srktool hope you didnt do it in srktool the c432 i only for normal P9 i once misd flashed it and i got vns-c432b160 i didnt have l21 or 31 nor anything and it was a pain in the a s s to fix

Need informations on version

Hi,
I got a huawei P10 lite locked in demo mode (coming from a commercial center demo product)
I unlocked OEM, open bootloader, installed TWRP (hope mine is the last), and I forgot to backup demo rom before trying to install a stock.
At this time, I can :
- enter TWRP
- enter Huawei recovery (but does update anything in wifi)
- enter bootloader to use fastboot.
My model is a :
WAS-LX1A on C652B101
I downloaded stock firmware posted 4 days ago, (http://bit.ly/2mcaPDA) and choose France Bytel (WAS-LX1AC530B171).
I put the update.app in a dload folder in my microSD card. I tried to update with vol+ vol- power.
I got a failed error
I download too WAS-LX1AC530B170 and got the same problem. I supposed it was because it wasn't the same country code (mine seems to be 652 right ?)
Finaly I found a supposed compatible version on (http://bit.ly/2hqbOOW) named : Full Firmware-mf WAS-LX1AC652B130 and a second one named Ota Update-mf WAS-LX1AC652B130.
I extracted update.app and put it in a dload folder and did not succed in upgrading.
My question is : Have I forgotten something ? Or is this demo model locked to be upgraded ?
Finaly, is there a backuped rom usable with TWRP to be restored ? (like I saw with the P8 lite 2017)
Thanks in advance, for your help, and my appologies for my very poor english writings

Man i recommend backup only oeminfo, copy c432 and restore, then with servicerom b182(ds) or b183(ss) copy update.app + all was folders inside dload to dload folder inside sdcard
Don' waste your time with vendors+huawei

foliaje said:
Man i recommend backup only oeminfo, copy c432 and restore, then with servicerom b182(ds) or b183(ss) copy update.app + all was folders inside dload to dload folder inside sdcard
Don' waste your time with vendors+huawei
Click to expand...
Click to collapse
Thanks for your quick answer.
Can you give me precisions plz ?
- backup only oeminfo ? You means backup with my twrp ?
- copy C432 and restore, you means download a stock c432 and restore it with twrp ?
- 3rd part is ok

lebeneur said:
Thanks for your quick answer.
Can you give me precisions plz ?
- backup only oeminfo ? You means backup with my twrp ?
- copy C432 and restore, you means download a stock c432 and restore it with twrp ?
- 3rd part is ok
Click to expand...
Click to collapse
Yeah you make a backup with twrp in your sdcard(copy to safe place), then copy/replace c432 and press restore.

Ok fine !
Have you got a link for the C432 wich could be copied or restor with TWRP ?
thanks

Here you can download dual or single,
if you can acess to settings<about phone therw you have the imei(s), or too looking in the box https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-oeminfo-collection-t3670325

Ok !
Just to be sure, there is no problem to use a servicerom LX1 to repair mine wich is a LX1A ?

lebeneur said:
Ok !
Just to be sure, there is no problem to use a servicerom LX1 to repair mine wich is a LX1A ?
Click to expand...
Click to collapse
we'll never try lx1 on lx1a device i dont want brick my device, just copy to dload folder in sdcard update.app and all was folders
LX1A
X means some number such as 0 or 2.
L21 dual SIM.
L01 single SIM
A is mark for 4gb model.

Great ! All seems clear. I will try this evening and will come back to informe you about the results.
Is the old oeminfo usefull after a successful restoration or can I keep the one I used in your sample ?

lebeneur said:
Great ! All seems clear. I will try this evening and will come back to informe you about the results.
Is the old oeminfo usefull after a successful restoration or can I keep the one I used in your sample ?
Click to expand...
Click to collapse
in post #4 i recommend copy to safe place before do anything, anyway usefull is but yo'll need a full backup, i dont know restore the mobile with ff
c432 is free nothing of vendors such as Vodafone, i dont know c652 where is so take care

All worked perfectly as you said ! Thank you very mutch sir !

Software Install Failed - WAS-LX1A SINGLE SIM 4GB

Hello,
Got a WAS-LX1A SINGLE SIM 4GB UK (with an updated WAS-LX1AC432B185 firmware).
Trying to go back to stock but all firmware (WAS-LX1AC432B179, WAS-LX1AC432B186, WAS-LX1AC432B187) which has been downloaded using Firmware Finder is failing via dload method: "Software Install Failed"
Any ideas or a link would to a firmware where I can start would be good,
Thanks

buddimanv said:
Hello,
Got a WAS-LX1A SINGLE SIM 4GB UK (with an updated WAS-LX1AC432B185 firmware).
Trying to go back to stock but all firmware (WAS-LX1AC432B179, WAS-LX1AC432B186, WAS-LX1AC432B187) which has been downloaded using Firmware Finder is failing via dload method: "Software Install Failed"
Any ideas or a link would to a firmware where I can start would be good,
Thanks
Click to expand...
Click to collapse
hi:
check this:
b182 =ds: 182, 184, 186 and so on....
b183= ss: 179, 183, 185, 187 so on...
-------------------------------------===== follow instructions of below if is bricked
now:
you need unlock bootloader
oeminfo ss
srom b183
twrp
sdcard
1- with a sdcard, create dload folder, then extract b183 and copy update.app + all was folders.
2- enable developer settings and enable oem unlock, poweroff and press vol-+power, then fastboot oem unlock code, then follow the screen(configs)
3- move twrp to c:/adb, with a cmd opened type cd c:/adb press enter, and type fatboot flash recovery recovery.img, finished type fastboot reboot plus pressing vol + till erecovery screen, shutdown and unplug, press vol+ power.
4- insert sdcard and make only a backup of your oeminfo, extract downloaded oem and copy/replace in twrp back folder, then restore in twrp. power off now only do 3buttons method

Thanks foliaje, I have tried WAS-LX1AC432B179 and its not working. The phone boots fine. Basically, I rooted and it tried to update via TWRP and failed. Now trying to restore to stock and getting this error. DO you have a link to the exact firmware that I can try - tried several of them now and its failing.

Ok, I managed to go back to stock by downloading via Firmware Finder. So, dload method via SD Card don't work with this phone or what? Would appreciate if someone can confirm?

buddimanv said:
Thanks foliaje, I have tried WAS-LX1AC432B179 and its not working. The phone boots fine. Basically, I rooted and it tried to update via TWRP and failed. Now trying to restore to stock and getting this error. DO you have a link to the exact firmware that I can try - tried several of them now and its failing.
Click to expand...
Click to collapse
links below and follow the guide of above, by the way otas doesnt work with twrp or/and root.
if your p10lite came with b183(confirm please) now you must have installed b185 or b187
https://drive.google.com/open?id=0B-k_1rnfFeEvTjkyLXNSVjVTSm8 oeminfo
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097 download servicerom b183

foliaje said:
links below and follow the guide of above, by the way otas doesnt work with twrp or/and root.
if your p10lite came with b183(confirm please) now you must have installed b185 or b187
https://drive.google.com/open?id=0B-k_1rnfFeEvTjkyLXNSVjVTSm8 oeminfo
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097 download servicerom b183
Click to expand...
Click to collapse
Hey foliaje, Thanks for your help, appreciate it.
Let me explain my issue: I have purchased my phone yesterday, it upgraded to 185 (I am assuming it was B183, didn't check) via OTA. Then I almost finished setting up the phone including ROOT but a b187 OTA appeared little bit later but failed because I had TWRP already installed. That's fine, no problem. So wanted to start again like I usually do - download the firmware, put on sd card and off you go......
But the problem with this phone is (and I had quite few Huawei one's including tablets) when I downloaded the full firmware, using the SD card dload method I get "Software Install Failed" but it seemed to have worked when I did it via Firmware Finder (I am on B187 now). So something not right - either something has changed or I need to do something else.
So what's the issue? The only think I can think of here is that you are saying that this phone require a 'service' firmware that does not do authentication or something? Right? I am downloading C432B183 from your link and will see what happens (bit slow).
I really would like to know now so I can get back to stock when I mess things up

OK...I followed as below:
Downloaded http://androidhost.ru/JS
(1) Copied main UPDATE.APP to dload folder
(2) Then renamed WAS-L01A_hw_eu\update_WAS-L01A_hw_eu.app to UPDATE.APP and copied to dload folder
Is above method correct, can we do it in one go?
Anyway, I think it has worked (had to do few reset) but the firmware version was showing WAS-LX1AC432B179 - is that correct? OTA upgraded to WAS-LX1AC432B185

buddimanv said:
WAS-LX1AC432B179 - is that correct
Click to expand...
Click to collapse
yeah it is correct, by the way in 2) is not necesary rename the update.app only copy all folders to sdcard

foliaje said:
yeah it is correct, by the way in 2) is not necesary rename the update.app only copy all folders to sdcard
Click to expand...
Click to collapse
Thanks dude, appreciate your help.
Now - any ideas why the firmware finder firmware's don't work on this phone via dload method?

buddimanv said:
Thanks dude, appreciate your help.
Now - any ideas why the firmware finder firmware's don't work on this phone via dload method?
Click to expand...
Click to collapse
In the UK and have exact same model. Filmware finder did not work for me also. The one in the link below did though! Its the first download you need. Copy the update.app and the folder 'L01A' to the 'dload' folder on your sd card. Does your phone boot? If so in the dialer type *#*#2846579#*#* and choose software upgrade then sd card update, it will then flash the filmware to pure stock.
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097

stonedpsycho said:
In the UK and have exact same model. Filmware finder did not work for me also. The one in the link below did though! Its the first download you need. Copy the update.app and the folder 'L01A' to the 'dload' folder on your sd card. Does your phone boot? If so in the dialer type *#*#2846579#*#* and choose software upgrade then sd card update, it will then flash the filmware to pure stock.
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
Click to expand...
Click to collapse
Yes, its all good now. Bizarre - Huawei making things difficult now. Which TWRP are you using? Can the TWRP backup function works for you i.e. encryption disabled?

C900b170 can't change

My device is p9 lite vns l31( c636) before i used elite roam v7.6. but now i want to go back stock roam. To go back i used roall back mm and c636b170 full ota. But now my devise build number is c900b170. I want to upgrade nauget c636. Please help me.

rathnayakepr3 said:
My device is p9 lite vns l31( c636) before i used elite roam v7.6. but now i want to go back stock roam. To go back i used roall back mm and c636b170 full ota. But now my devise build number is c900b170. I want to upgrade nauget c636. Please help me.
Click to expand...
Click to collapse
Hello man,
did you removed prevoius update.app from SD card, the one from rollback??
Maybe you forgot to do this...
If you sure you done all things right then take a look at the UNIFIED HELP THREAD...
At 6th post you'll find a L31 rollback package that will give you C900B300 global firmware.
From this flash C636B170 full ota and see if worked this time....
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152

Dadditz said:
Hello man,
did you removed prevoius update.app from SD card, the one from rollback??
Maybe you forgot to do this...
If you sure you done all things right then take a look at the UNIFIED HELP THREAD...
At 6th post you'll find a L31 rollback package that will give you C900B300 global firmware.
From this flash C636B170 full ota and see if worked this time....
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Click to expand...
Click to collapse
.
But i donnt know how to flash oem info and custom bin through the toolkit. Please help me.

rathnayakepr3 said:
.
But i donnt know how to flash oem info and custom bin through the toolkit. Please help me.
Click to expand...
Click to collapse
Hello dude,
in the guide i never readed to use the toolkit, that's another way i think...
Flashing the rollback package will bring you c900b300 firmware wich means global intermediate transitive firmware...
Create a dload folder in SD card, extract update.app from rollback package and put in it.
Turn off you phone. Now disconnect from PC, and let it start keeping vol+ vol- and power buttons.
When it ends turn it off and remove the SD card and the update.app from dload folder.
Download and extract update.app from L31C636B170 full update.
If you missed it...
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66846/f1/full/update.zip
Put this in dload folder in SD card again and put in your phone...
Repeat vol+ vol- power buttons and it will flash...
Recommended: when finished reboot to e_recovery (vol+ power buttons) and factory reset.
If all gone well you will stay now on marshmallow firmware..
Wish you the best my friend...:fingers-crossed:
Edit: flash the rollpack package suggested in prevoius post.
All credits goes to @dariomrk and other contributors that create the thread.
Thank you guys.

P9lite L31 working withe L21 firmware how can i fix it

i have an P9lite VNS-L31,that was soft brooking!!after fixed from smartphone fixer with some BOX it became working with an L21 firmware build number (VNS-L21C185B3XX),it was working fine with some bug like Bluetooth not working ,and it auto update to (VNS-L21C185B399) and nothing is working no camera no Bluetooth no virtual keyboard.
i need some help to how rebrand downgrade the phone to original VNS-L31C185B150 (original rom).
thank you

kriminel87 said:
i have an P9lite VNS-L31,that was soft brooking!!after fixed from smartphone fixer with some BOX it became working with an L21 firmware build number (VNS-L21C185B3XX),it was working fine with some bug like Bluetooth not working ,and it auto update to (VNS-L21C185B399) and nothing is working no camera no Bluetooth no virtual keyboard.
i need some help to how rebrand downgrade the phone to original VNS-L31C185B150 (original rom).
thank you
Click to expand...
Click to collapse
please help me anyone !!!

kriminel87 said:
please help me anyone !!!
Click to expand...
Click to collapse
Hey dude,
i searched a bit for the correct OEMinfo file to convert
your phone from L21 to L31 version, but your CUST (C185) seem
to be non-existent at the moment...
Sincerely i never seen anyone doing this kind of conversion, but it may work...
Under your responsibility and my guide, you could try to convert it to the European CUST (C432).
If i'm correct, your device is running android 7 and it is single sim, can you confirm this ?
So, if you agree and will not point your finger at me (for a bad scenario), i can tell you how do this.
Cheers

Dadditz said:
Hey dude,
i searched a bit for the correct OEMinfo file to convert
your phone from L21 to L31 version, but your CUST (C185) seem
to be non-existent at the moment...
Sincerely i never seen anyone doing this kind of conversion, but it may work...
Under your responsibility and my guide, you could try to convert it to the European CUST (C432).
If i'm correct, your device is running android 7 and it is single sim, can you confirm this ?
So, if you agree and will not point your finger at me (for a bad scenario), i can tell you how do this.
Cheers
Click to expand...
Click to collapse
thank you for the response!!if you have any recommendation yes i will take it!my phone is working android 7 duel sim!if i convert it to european CUST is there any chance that wil be simlocked ??

kriminel87 said:
thank you for the response!!if you have any recommendation yes i will take it!my phone is working android 7 duel sim!if i convert it to european CUST is there any chance that wil be simlocked ??
Click to expand...
Click to collapse
Dude you have to use a custom recovery (TWRP)
to be able to flash a different oeminfo file
and the appropriate firmware.
So you need to unlock your bootloader first.
When you done this come back for the files and the guide...
The European no brand firmware will not lock any sim
and i'm pretty sure your sim will continue to normally work,
but it's your choice, you can ever keep your device as it is...
Cheers

Dadditz said:
Dude you have to use a custom recovery (TWRP)
to be able to flash a different oeminfo file
and the appropriate firmware.
So you need to unlock your bootloader first.
When you done this come back for the files and the guide...
The European no brand firmware will not lock any sim
and i'm pretty sure your sim will continue to normally work,
but it's your choice, you can ever keep your device as it is...
Cheers
Click to expand...
Click to collapse
ok i will do it bat i need some help like what is the best working TWRP and what is the best working European firmware!and oeminfo i will use i have to extract it from the firmware or i have to found it from somewhere else!!thank you

kriminel87 said:
ok i will do it bat i need some help like what is the best working TWRP and what is the best working European firmware!and oeminfo i will use i have to extract it from the firmware or i have to found it from somewhere else!!thank you
Click to expand...
Click to collapse
Dude,
you have to not worry about twrp, firmware and oeminfo...
i can provide you those files.
Remove all safeties (pin / pattern / fingerprints),
possibly do a backup of your most important files
as unlocking the bootloader will factory reset your device.
When you're ready I will tell you which files and the guide to convert ...
Cheers

Dadditz said:
Dude,
you have to not worry about twrp, firmware and oeminfo...
i can provide you those files.
Remove all safeties (pin / pattern / fingerprints),
possibly do a backup of your most important files
as unlocking the bootloader will factory reset your device.
When you're ready I will tell you which files and the guide to convert ...
Cheers
Click to expand...
Click to collapse
unlocking the bootloader done,what next !!!:good:

kriminel87 said:
unlocking the bootloader done,what next !!!:good:
Click to expand...
Click to collapse
Dude sorry for answering you late,
i'm little busy atm.
THIS is Hassan's 3.1.1-1 recovery, your TWRP;
Your dualSIMC432OEMinfo.zip file;
This is HuRUpdater04 script (zip) file;
The Firmware (latest VNS-L31C432B418),
they are three files;
1 - update .zip;
2 - update_data_full_public .zip;
3 - update_full_VNS-L31_hw_eu .zip;
Let file 1 the same name,
rename file 2 from update_data_full_public TO update_data_public,
rename file 3 from update_full_VNS-L31_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L31C432B418.
Copy files 1-2-3 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L31C432B418 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!

i did what you told me using this method https://forum.xda-developers.com/hu...ite-upgrade-rebrand-tools-pc-t3778839,ulocked boot loader installed TWRP recovery than used oem info for L31C432 and i download last full ota firmwire for it !!worked fine
thank you for guiding me!! i appreciate your help :victory::victory::good:

kriminel87 said:
unlocking the bootloader done,what next !!!:good:
Click to expand...
Click to collapse
Dude sorry for answering you late,
i'm little busy atm.
THIS is Hassan's 3.1.1-1 recovery, your TWRP;
Your dualSIMC432OEMinfo.zip file;
This is HuRUpdater04 script (zip) file;
The Firmware (latest VNS-L31C432B418),
they are three files;
1 - update .zip;
2 - update_data_full_public .zip;
3 - update_full_VNS-L31_hw_eu .zip;
Let file 1 the same name,
rename file 2 from update_data_full_public TO update_data_public,
rename file 3 from update_full_VNS-L31_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L31C432B418.
Copy files 1-2-3 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Flash the 3.1.1-1 recovery into your device:
( fastboot flash recovery 'nameofrecovery'.img )
You can also use some apps to flash .img files...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L31C432B418 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
If you have any doubt, just let me know....

Dadditz said:
Dude sorry for answering you late,
i'm little busy atm.
THIS is Hassan's 3.1.1-1 recovery, your TWRP;
Your dualSIMC432OEMinfo.zip file;
This is HuRUpdater04 script (zip) file;
The Firmware (latest VNS-L31C432B418),
they are three files;
1 - update .zip;
2 - update_data_full_public .zip;
3 - update_full_VNS-L31_hw_eu .zip;
Let file 1 the same name,
rename file 2 from update_data_full_public TO update_data_public,
rename file 3 from update_full_VNS-L31_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L31C432B418.
Copy files 1-2-3 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L31C432B418 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
Click to expand...
Click to collapse
thank you again you help me so mush i appreciate it :good:

kriminel87 said:
i did what you told me using this method https://forum.xda-developers.com/hu...ite-upgrade-rebrand-tools-pc-t3778839,ulocked boot loader installed TWRP recovery than used oem info for L31C432 and i download last full ota firmwire for it !!worked fine
thank you for guiding me!! i appreciate your help :victory::victory::good:
Click to expand...
Click to collapse
kriminel87 said:
thank you again you help me so mush i appreciate it :good:
Click to expand...
Click to collapse
Dude, my satisfaction is that everything went well ..
Thank you so much for all your feedback.
Cheers :highfive: