I tried rooting. I checked with rootchecker so it didn't root. Update notification came and I clicked on update. The next screen I know said "your device is unlocked and can't be trusted" and after that a dead Android logo and "
error!" Message.
How did you try to root, and with what versions of what software? Did you follow the tutorials here, there are specific ways to go about rooting this device...
Related
Hello, I've been trying to root my device, i tried Framaroot, but on opening it error occurs saying "your device is not vulnerable to exploit included in framaroot"
Then i tried superoneclick 2.2, i installed ADB drives and my device gets successfully connected by Pda Net, but when i try to root from superoneclick, it gets stuck in "waiting for device".
Please help me is there any other way to root my deivce?
I have attached a screenshot of my "About Tablet"
Good afternoon guys, I'm new to the forum and would like to ask your help.
I am with a Moto G5 xt1762, which is giving bootloader error. It does not leave this screen, and displays the following message.
Start Up Failed:
Your device didn't star up sucessfully.
Use the software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the softare repair assistant.
Fagnerasp said:
Good afternoon guys, I'm new to the forum and would like to ask your help.
I am with a Moto G5 xt1762, which is giving bootloader error. It does not leave this screen, and displays the following message.
Start Up Failed:
Your device didn't star up sucessfully.
Use the software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the softare repair assistant.
Click to expand...
Click to collapse
Hold up, these are Moto G5 Plus forums, you say you have a G5, and "xt1762" is Moto E4. So which is it
Regarding the error, it seems like it's bricked, can you access recovery/bootloader? Does the phone have an unlocked bootloader, root or twrp?
So, like an idiot I got excited about rooting my phone and my first big mistake was not making a backup. I followed all the steps in the video titled "Official Android 7.0 Nougat on Moto X Pure Edition!" by HereGadgets on Youtube.
Now I'm stuck at the "WARNING BOOTLOADER UNLOCKED" Screen. The only difference I can find in my process was that when I was going through the process it said "Slot Count Not Found".
I have tried to use the "Moto X ToolKit" but it can't connect to daemon.
Also (if it means anything) when I'm in my bootloader it says "Status Code 3".
Yes I know that I am very dumb.
I tried to reflash to a factory default, and it says "Not supported command in current status". So I think I would have to access the "Allow OEM unlock" option in developer options, which I obviously cannot do since my phone is stuck on the screen.
I'm quite hopeless but if anyone can shed some light on how to fix my issue I'd be forever grateful.
Just come back to the G6 after a break.. I picked up a Pre-owned one from local CEX store, which worked fine in the store when testing it...
With it being a pre-owned device.. I put it through "Error Recovery" in LG Bridge.. However, it wouldnt install the 20c stock rom or reboot from "Firmware update"... the rotating arrows on the "firmware update" kept freezing, until LGBridge timed out..
And no matter how many times I reset it "Vol Up + Pwr", the progress bar on the G6 kept resetting to "0%" as the rom was installing on Bridge.. and then timing out... However, in the small status window on the G6 inself it kept reading "Unknown : r/ rw/ "...
So I installed LGUp and Uppercut, to "Force" the 20C update... yet it kept doing the same thing... "Unknown r / rw" and resetting the progress bar...
So I hit upon an Idea... I downloaded "110l" android 7... to force a rollback.. to fully "Jump start" the rom process.. this got to 50%.. and the G6 update locked up again...
I was swearing by now and starting to look for my reciept.. with a view to refunding it..
Then I tried once more with 20C through LGUP, hoping my Android 7 Rollback attempt had formatted / cleared the cache.. and Woohoo, it worked... . and its now up and running prefectly on 8,0 / Aug 18..
So, for future reference and a learning perspective here...... can someone please shed some light on what happened to my G6 and had the seller of the phone tampered with it, flashed something/unlocked bootloader ...
Thanks all
Howdy,
I've used the Tab A for a couple of months now as literally a daily driver, since I modified it to fit into the multimedia slot in my car. It was rooted, had TWRP and even Viper4Android on it.
Long story short:
Since it's laggy I thought to test project Treble on it, since it's supported.
I wiped the tablet with TWRP and installed arm64 A/B (since it's Android 10) and it wouldn't boot anymore. It showed "Samsung Galaxy Tab A", shut off, vibrated and repeat. Also tried "Only A". Same result.
I thought to install it via fastboot. Since TWRP effectively replaced Fastbook afaik, I tried to flash the original "BL" downloaded form sammobile for this exact model. Flashed it, it succeeded and then...
It turns on with a blue screen that essentially says "This phone has been modified and is locked" with red letters on top stating "SECURE CHECK FAIL: recovery.img"
I can't get into download, it always jumps to this message. I tried all possible combinations, plugged the tablet into my pc while holding down buttons - nothing.
If I hold the pwr+down for circa 10-15 seconds while in this screen, it reboots and goes to a slightly different message stating: "SECURE CHECK FAIL: boot.img"
My PC doesn't recognize any USB devices, not even in the device manager.
What should I do? Any help would be greatly appreciated.
(I guess no music on the daily commute tomorrow lol)
Tried a Samsung JIG adapter. Still no success
Finally good news!
I tried it again with new combinations.
Turns out, if you hold all three buttons (pwr, down and up) eventually DOWNLOAD mode appears.
Worked here and am flashing stock now.
For rooting on latest bootloader (Rev:4, U4) which is the one you've installed already, you must purchase a subscription on this page and download that file for root:
https://support.halabtech.com/index.php?a=downloads&b=file&id=452768
As you described, it seem that you updated the bootloader and there's no way to get back at Rev:3 U3 bootloader, having the same trouble in rooting terms, I just hope a developer or an advance user that have a subscription in such page can help us and share the file that is on that page
Mafworld said:
For rooting on latest bootloader (Rev:4, U4) which is the one you've installed already, you must purchase a subscription on this page and download that file for root:
https://support.halabtech.com/index.php?a=downloads&b=file&id=452768
As you described, it seem that you updated the bootloader and there's no way to get back at Rev:3 U3 bootloader, having the same trouble in rooting terms, I just hope a developer or an advance user that have a subscription in such page can help us and share the file that is on that page
Click to expand...
Click to collapse
No it wont work i have tried it. It gets secure check fail boot.img