Related
Hello,
I come here and make a new thread after I spent the day inside various forums to solve my problem but wasn't able to.
Here is the thing I tried to install the cyanogenmod earlier today. I unlocked my N1 properly and think I rooted it properly as well. But I was unable to install the custom rom. Actually my N1 won't even boot, it's stuck on the cross image with the unlocked lock and I can't boot the recovery either. I tried to install a custom recovery, the amon ra thing, but it still freezes on the cross screen.
I assume my N1 isn't completely bricked since I can still power it up, start the fastboot mode and my computer recognize de USB connection (however ADB won't find the phone even after I re-installed the drivers).
So here I come for help to either bring back my N1 to its former stock rom or any functionning rom.
Thanks.
Try the unroot/restore guide with PASSIMG of FRG33. Look at my signature.
oh thank you !!! It worked perfectly !
EDIT : Well spoke too soon I rebooted the N1 after its apparent recover and it froze again, so I started the operation once more and while updating the files ravio_v2 was checked "fail-pu" instead of "ok"
EDIT 2 : Well I rebooted after the update and the N1 never powered up again ... I guess now it is really bricked... though I can't figure why
olicyr said:
EDIT 2 : Well I rebooted after the update and the N1 never powered up again ... I guess now it is really bricked... though I can't figure why
Click to expand...
Click to collapse
You can't even get into fastboot any more?
Also, you say you followed the right steps to unlock the device and the right steps to root the device... What steps did you take exactly?
Hi,
to unlock the phone I used the oem command in the fastboot mode. Then I tried to install the amon ra custom recovery and I think that is what brought all this trouble.
Can you still see your device through fastboot? If so you should be able to flash a recovery image and a ROM of your choosing.
It should boot up fastboot like Dirk said. You can not brick the phone by flashing a recovery.
Sent from my Nexus One using XDA App
I guess there is some HW fault - might be a recent bad sector in one of the system critical areas. It's not something you can cause with SW - unless you're flashing hboot or radio, which should have been covered in the first restore attempt, which worked.
Anyway, if it doesn't power up at all - and doesn't react to charging - try pulling out the battery for several hours, and then put it back and try again. If it doesn't work - then you're up for a warranty repair...
DirkGently1 said:
Can you still see your device through fastboot? If so you should be able to flash a recovery image and a ROM of your choosing.
Click to expand...
Click to collapse
No the phone doesn't boot anything. I'll try to remove the battery and wait a few hours like said above, if it doesn't work I'm still under warranty I think
Was having issues with my Nexus 7(2013) this morning, rebooted the device and now it gets stuck at the "Google" loading screen.
I can get into the Fastboot loader. I was able to unlock the bootloader.. I have LOCK STATE - unlocked and the unlocked lock showing up on the "Google" boot screen.
I am UNABLE to get into Recovery mode.. either by selecting "Recovery mode" in Fastboot or holding the power and vol up buttons. It just sits on the "Google" boot screen.
I have downloaded and installed the SkipSoft Android Toolkit(mskip).. very nice toolkit BTW. But no matter what I do I'm unable to start the tablet up normally or get into a Recovery mode of any kind.
I have tried to flash TWRP. I have tried to flash the stock ROM. Nothing, still sits at the Google boot screen. Since flashing the stock ROM its been 30 min and still just says "Google".
I'm open to any ideas or anything that you can think of.
Still have TWRP and fastboot access? If so, use the command line fastboot the img using
"fastboot boot <filename>.img"
Reply back; do you get to recovery?
Snuzzo said:
Still have TWRP and fastboot access? If so, use the command line fastboot the img using
"fastboot boot <filename>.img"
Reply back; do you get to recovery?
Click to expand...
Click to collapse
No.. I do not get into recovery of any kind. Stock or TWRP after loading it.. just sits at the Google screen.
Quick question; what were your partition setups like? F2fs? Ext4?
Snuzzo said:
Quick question; what were your partition setups like? F2fs? Ext4?
Click to expand...
Click to collapse
No idea.. it should be whatever it is stock. Before today I never rooted, flashed or did anything to this device.
FDokinawa said:
No idea.. it should be whatever it is stock. Before today I never rooted, flashed or did anything to this device.
Click to expand...
Click to collapse
Answers all of my questions. I know myself I won't be able to help. All I can say is to try relocking and then unlocking again.
Snuzzo said:
Answers all of my questions. I know myself I won't be able to help. All I can say is to try relocking and then unlocking again.
Click to expand...
Click to collapse
Thanks for the help.. will give it a shot.
FDokinawa said:
Thanks for the help.. will give it a shot.
Click to expand...
Click to collapse
What that should do is wipe internal, could have some corruption there. Try doing the command line fastboot of the recovery.img again. Those are the only few things I can think of short from exercising your warranty.
Snuzzo said:
What that should do is wipe internal, could have some corruption there. Try doing the command line fastboot of the recovery.img again. Those are the only few things I can think of short from exercising your warranty.
Click to expand...
Click to collapse
Dont think I can use the warranty.. bought it used(1 hour old) from a friend for $100.. he got it and then decided he didnt like the aspect ratio. His loss, my gain. Until now.. lol
I'll keep hacking at it.. thanks again.
Anytime! You're welcome!
So the original issue I was having was that the screen was not responding to touches. Was unable to slide the unlock button on the screen.
I was able to "Boot to Custom/Stock Recovery without Permanently Flashing it" via SkipSoft Toolkit.. and had TWRP load up. But like before it was not responding to touches.
Starting to think this thing is totally borked.. =/
I'm able to get into TWRP now.. but sits on boot animation screen now. one step forward. Going to try and reload the stock ROM again and see if that helps.
That seemed to work.. at the Welcome screen.
So if anyone else runs into something like this..
Issues:
Flakey touch screen
Stuck on Google bootup screen
Eventually stuck boot loop animation
Get SkipSoft Android Toolkit, donate a couple bucks and keep flashing anything and everything you can. Sorry I can't give you a specific order that works. I would say try the 'ALLINONE'(#8) option first and then download and flash the stock ROM. I did several things in the toolkit a few times over and over. Hopefully I'm good now, if not I will update.
Have you tried reflashing recovery via fastboot?
Exact thing happend to my n4.
Sent from my N⁴ using Android Lollipop by @Sykopompus running Unleased kernel by @DeFcOni
================================
Solution: http://forum.xda-developers.com/one...bootloader-locked-t3212187/page2#post63494201
================================
Hello,
This afternoon, I was preparing to flash Oxygen OS 2.1 through twrp but I wanted to make a backup first. Attempting to load up twrp by holding Vol- and Power, my OPT flashed the starting frame of the boot animation for half a second before turning off. This repeated every 5 seconds. I could still boot OOS normally at this stage.
I decided to reflash twrp so as to make the backups, but on attempting to flash it, I saw that my bootloader was locked. So into fastboot mode I went, but trying to unlock it, it did the same as trying to get into recovery. As soon as I sent the command, "fastboot oem unlock", the screen went dark, flashed the starting frame for the boot animation, and promptly when dark again.
I now can't boot up normally, nor can I enter recovery. I can access fastboot mode, but I can't seem to make any changes.
I've attempted to use this solution as well as several other similar ones with no success.
I've had my OPT since 17th of August with absolutely no signs of trouble until this afternoon.
To me, it seems like it could be a hardware issue, but I'd hope it would last more than 40 days.
Any suggestions?
Thanks.
----
x-post: whirlpool, reddit
The same just happened to me, wtf
Makrilli said:
The same just happened to me, wtf
Click to expand...
Click to collapse
What were you doing before it occurred? Perhaps we can work out the cause.
GusGold said:
What were you doing before it occurred? Perhaps we can work out the cause.
Click to expand...
Click to collapse
I'm not sure what I was doing, I was going to flash different ak kernel as my wifi didn't work.
HOWEVER
I read someone suggesting if you still have bootloop after trying the qualcomm recovery tool, try booting to fastboot and use: fastboot continue
my opt booted nicely to hydrogen os and after I shut it down it no longer bootlooped and I was able to get to recovery.
I'll post this to your reddit thread too, maybe it might help somebody one day, hopefully this works for you too
Makrilli said:
use: fastboot continue
Click to expand...
Click to collapse
Mate! that worked for me too!
However... It only seems to skip the bootloop for that power on. After power off, it returns to the boot loop. I also still can't unlock the bootloader and can't access recovery.
But at least it can boot into OS with fastboot continue!
Thank you.
Weird, after the first successful boot I rebooted and a chinese menu prompted me if I wanted to unlock the bootloader, and I did.
Maybe you should try different recovery packages.
But I'm glad to hear you at least got past the boot loop
Makrilli said:
Maybe you should try different recovery packages.
Click to expand...
Click to collapse
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
GusGold said:
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
Click to expand...
Click to collapse
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Makrilli said:
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Click to expand...
Click to collapse
Ahh, do you mind linking me to the one you used?
I think I used this: https://mega.nz/#!EsNQHKab!ifATzg4rxxBniPad0iyxANqlN8cZpUx2MVWaZgEhrD4
but it might have also been this: https://drive.google.com/file/d/0B14IjYN3PtxcSlJ5aGQxX3JERHM/view?usp=sharing
It's also worth mentioning I flashed both a few times before I tried the fastboot continue command so try both a few times and see if that helps, also I replaced the stock recovery with twrp in both recovery packages before flashing.
Edit: And best of luck, I'm rather confident your OPT is going to work properly again.
Boot Loop
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
p3wb said:
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
Click to expand...
Click to collapse
And I'm guessing you have tried the qualcomm recovery tool?
And I'm guessing you have tried the qualcomm recovery tool?[/QUOTE]
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
p3wb said:
And I'm guessing you have tried the qualcomm recovery tool?
Click to expand...
Click to collapse
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.[/QUOTE]
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT
Makrilli said:
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
Click to expand...
Click to collapse
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT[/QUOTE]
I finally got my OPT working again, tried Qualcomm recovery tool, wasn't able to complete the "MSM8994DownloadTool"
So i downloaded "A2001_14_A.03_150805" in a guide from technobuzz.net/unbrick-oneplus-2/
A similar but it does a entire wipe of the phone, nothing left at all. WARNING!
But i was okey with it.
Well the phone was in Chinese when it was all done but to change language was no problem.
I finally managed to solve it on mine. I had been cautious over the past weeks to not let it run out of battery or get turned off while away from my computer as
Code:
fastboot continue
was the only way I could get past the boot loop.
My core issue to solve was that I couldn't get it recognised as the USB Diagnostic 9006 under Ports in Device Manager. I installed the driver from here manually by right clicking the /qcser/x64/qcser.inf file and selecting install from the context menu. Then, I powered off my OP2. While only holding Vol+ (not power or Vol-), I plugged in my OP2 to the computer and it was finally recognised as the 9006. Then using the recovery tool from the prior link, it installed and rebooted my OP2. The moment of truth was when it rebooted and didn't enter a boot loop!
Then with the Chinese recovery prompt, I selected the top/first option and it brought me to the welcome/first setup screen of OOS.
It wiped the internal memory, and installed OSS 2.0.2 (don't know if coincidence or not as that was my prior OS as well). Now to install twrp and update to the latest OOS hopefully without a hitch.
Happy to finally know it wasn't a hardware issue like a failed eeprom or a dud nand controller as my prior phone (Samsung Note 10.1) died to a failed nand controller as well.
Will update with news of twrp and OOS, but I feel that should go smoothly now. Thanks to the others that helped in this thread too!
Yeap, all good!
Flashed official twrp through fastboot and batch installed OOS2 through 2.1.1 patches and SuperSU. Everything working like new!
Phew.
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
gamdiiii said:
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
Click to expand...
Click to collapse
Is it recognised as a USB Diagnostic 9006 in your device manager?
Hi GusGold No its 9008
Good evening XDA,
I've got a Nexus 6p (obviously), and can't get it to boot. Unfortunately, I don't know the exact history as to how it's in this state.
I've tried everything I can think of and read every guide/steps/forums I can find that relates to my situation.
I can get to the bootloader and issue Fastboot commands. I've got adb/fastoot/drivers installed via the sdk/platform tools, and drivers are up to date as far as I can tell.
-I'm using the OEM cable attached to my computer (Surface Pro3, Windows 10)
-I can unlock/re-lock the bootloader as I wish.
-I've tried WugFresh toolkit, flash factory + unroot. All completes, but phones continues to loop even after leaving it for an hour+.
-I've tried Heisenbergs guide for manually flashing stock google images via fastboot to no avail. Tried several different google images. Everything completes, but it still just loops.
-I can get all fastboot commands to complete with no errors, but the phone just simply bootloops at the google logo, or if I leave bootloader unlocked it loops with the orange triangle & google logo. I have left it looping for at least an hour+, but it doesn't finish:crying:
-Stock recovery or a fastboot flashed trwp recovery simply won't boot, it just goes to the google logo and loops, I don't get the dead android w/triangle. "Recovery" in the bootloader selections is RED, if that means anything. Tried fastboot commands to boot recovery, but just sends it to the google logo and loops.
-Adb commands don't work, only fastboot commands.
-During flashing a google stock image with fastboot, the only thing that stands out is "max download of ####### reached", or something similar, but it still completes.....?
Seems to me that I've got a true brick (first ), and just need to send it in for repair.
Any help would be greatly appreciated. TIA.
Well, personally I believe it is a brick. Because I had something similar and it was fixed by a simple complete wipe of the phone - did you try that, and follow the order for fastboot flashing?
As for replacement. I have a dent in the frame that effected the volume button until I pushed it back in. I contacted google support and they told me since it was physical damage. That I would have to contact Huawei for repairs, and they promptly gave me their number. As for your case it could be a board failure and could go under warranty through google. Good luck! Off to help more people.
PS: Use a twp version higher than 2.x.x, that was what my issue was.
TnT_ said:
Well, personally I believe it is a brick. Because I had something similar and it was fixed by a simple complete wipe of the phone - did you try that, and follow the order for fastboot flashing?
As for replacement. I have a dent in the frame that effected the volume button until I pushed it back in. I contacted google support and they told me since it was physical damage. That I would have to contact Huawei for repairs, and they promptly gave me their number. As for your case it could be a board failure and could go under warranty through google. Good luck! Off to help more people.
PS: Use a twp version higher than 2.x.x, that was what my issue was.
Click to expand...
Click to collapse
Thanks for the reply. I thought (hoped) it might be a button issue too, but there is no damage to the phone, and buttons work as they should in the bootloader. Gave them a slight tap, but same results.
As for the "complete wipe", I can only erase/format via fastboot (or WugFresh ToolKit) since I can't get to recovery, and that hasn't given me any different results.
Dhickory said:
Thanks for the reply. I thought (hoped) it might be a button issue too, but there is no damage to the phone, and buttons work as they should in the bootloader. Gave them a slight tap, but same results.
As for the "complete wipe", I can only erase/format via fastboot (or WugFresh ToolKit) since I can't get to recovery, and that hasn't given me any different results.
Click to expand...
Click to collapse
Does all the data in the bootloader look fine? The storage size etc?
TnT_ said:
Does all the data in the bootloader look fine? The storage size etc?
Click to expand...
Click to collapse
As far as I can tell, everything looks normal. Is there anything you know of that would raise suspicion? I'll post exactly what it says when I get back to it.
Dhickory said:
As far as I can tell, everything looks normal. Is there anything you know of that would raise suspicion? I'll post exactly what it says when I get back to it.
Click to expand...
Click to collapse
Usually with board failure - that I saw in other threads - there are missing fields. My phone had a little glitchyness after I accidentally flashed the userdata.img - which caused my 128gb to become 32gb, which I found amusing - Other than that, I don't know. I'm sure others would reply.
I powered the phone off via the bootloader menu. Came back to the phone and powered it on, and it started the bootloop. I only held down the volume down button (during loop), and it booted to the bootloader. Is this normal? I realize I'm probably grasping at anything, but I've got some time to kill and just curious if it loops and only the volume down button is held should it go to the bootloader?
Dhickory said:
I powered the phone off via the bootloader menu. Came back to the phone and powered it on, and it started the bootloop. I only held down the volume down button (during loop), and it booted to the bootloader. Is this normal? I realize I'm probably grasping at anything, but I've got some time to kill and just curious if it loops and only the volume down button is held should it go to the bootloader?
Click to expand...
Click to collapse
TWRP 3.0.2-1 may have been used on this device and a restore may have been attempted, causing the EFS partition to be damaged. There a thread in this qna section by the tittle of Lets get this......I don't remember the rest, but it has a post concerning what to do to fix the bootloop.
Edit
Here you go: http://forum.xda-developers.com/showthread.php?t=3453119
Sent from my LG G4 using Tapatalk
Jammol said:
TWRP 3.0.2-1 may have been used on this device and a restore may have been attempted, causing the EFS partition to be damaged. There a thread in this qna section by the tittle of Lets get this......I don't remember the rest, but it has a post concerning what to do to fix the bootloop.
Edit
Here you go: http://forum.xda-developers.com/showthread.php?t=3453119
Sent from my LG G4 using Tapatalk
Click to expand...
Click to collapse
Thanks for the link, and I've been reading the "Let's figure out this brick together" thread. The link you posted requires ADB commands to work to fix the EFS partition, but I can only run fastboot commands. ADB nor Recovery work on my device. Still reading...
Woohoo! Huawei replaced the phone, no questions asked. I think the saving grace was being able to flash stock images, and relock the bootloader. May be helpful to anyone else in this situation that can only run fastboot commands, and no recovery.
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
pleasuremann said:
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
Click to expand...
Click to collapse
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
levone1 said:
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
Click to expand...
Click to collapse
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
pleasuremann said:
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
Click to expand...
Click to collapse
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
levone1 said:
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
Click to expand...
Click to collapse
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
jayeffpee said:
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
Click to expand...
Click to collapse
Does fastboot work? Also, what do you ultimately want to do, return to stock?
levone1 said:
Does fastboot work? Also, what do you ultimately want to do, return to stock?
Click to expand...
Click to collapse
yes, after hard work to install drivers, I managed to get the phone to be recognized by Flashtool in fastboot mode. But the phone is not charging when turned off, and its not rebooting. I wanted to try again with stock ROM, since I got some battery issues with LineageOS (phone turned off while playing some games, and worked fine while doing the same with usb cable charging to laptop or AC charger.)
But I cannot do anything right now. Only fastboot mode and force restart works, but it stuck in Sony logo (after normal bootloader unlock 5 seconds warning). What can I do?