*****UPDATE UPDATE UPDATE*******
(See Below)
Several month back I attempted and miserably failed at making a stripped down version of CyanogenMod for making use of Plasma Mobile. As of 17Oct17, I successfully compiled Halium 7.1 for the OnePlus One. Goto the links provided below for testing out Halium 7.1 and Plasma Mobile (CAF version)
-Halium system.img and hybris-boot.img
https://drive.google.com/drive/folders/0B9YKnsRlFA8pMFN6NjkwZHVRYzg
Plasma Mobile rootfs.img (CAF)
http://images.plasma-mobile.org/caf-rootfs/
Halium-Install script
https://github.com/Halium/halium-scripts/
The process is to wipe device from TWRP recovery. Install hybris-boot.img to boot partition. Then from a computer (Ubuntu preferrably) goto the the cloned directory and run the following command:
./halium-install pm-rootfs-20171011-131506.tar.gz system.img
If all goes well your device will reboot and plasma mobile will start. This is not a daily driver by any means at this point. I am NOT responsible for any bricked devices or problems that may occur. If you have issues with "unauthorized device" messages, try using "sudo" before issuing the above installation command. Enjoy.
Original Thread on OnePlus Forums
https://forums.oneplus.net/threads/halium-7-1-bacon-edition-plasma-mobile.660306/
Porting Guide (includes links to sources)
https://docs.halium.org/en/latest/porting/
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
I've compiled the Halium 5.1 (CAF variant) for the OnePlus One. This one seems to be alot more responsive than Halium 7.1. Follow the same installation process as mentioned above; however, download the latest non-CAF Plasma Mobile rootfs. Follow the link below for the Halium 5.1 (CAF) hybris-boot.img and system.img
https://drive.google.com/open?id=0B9YKnsRlFA8pNnVVdG9zcEpOYkU
In order to post on "Android Development" you must include links to your source and (if used) original source's
xreactx said:
Several month back I attempted and miserably failed at making a stripped down version of CyanogenMod for making use of Plasma Mobile. As of 17Oct17, I successfully compiled Halium 7.1 for the OnePlus One. Goto the links provided below for testing out Halium 7.1 and Plasma Mobile (CAF version)
-Halium system.img and hybris-boot.img
https://drive.google.com/drive/folders/0B9YKnsRlFA8pMFN6NjkwZHVRYzg
Plasma Mobile rootfs.img (CAF)
http://images.plasma-mobile.org/caf-rootfs/
Halium-Install script
https://github.com/Halium/halium-scripts/
The process is to wipe device from TWRP recovery. Install hybris-boot.img to boot partition. Then from a computer (Ubuntu preferrably) goto the the cloned directory and run the following command:
./halium-install pm-rootfs-20171011-131506.tar.gz system.img
If all goes well your device will reboot and plasma mobile will start. This is not a daily driver by any means at this point. I am NOT responsible for any bricked devices or problems that may occur. If you have issues with "unauthorized device" messages, try using "sudo" before issuing the above installation command. Enjoy.
Original Thread on OnePlus Forums
https://forums.oneplus.net/threads/halium-7-1-bacon-edition-plasma-mobile.660306/
Porting Guide (includes links to sources)
https://docs.halium.org/en/latest/porting/
Click to expand...
Click to collapse
Wow this are very good news. Congrats my friend
Enviado desde mi A0001 mediante Tapatalk
Good work my friend (screenshot would great)
Plasma Mobile UI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[email protected] said:
good work my friend (screenshot would great)
Click to expand...
Click to collapse
So its modded Ubuntu touch
Good work sir
[email protected] said:
So its modded Ubuntu touch
Good work sir
Click to expand...
Click to collapse
I believe Halium takes much of its coding from UBports. It took me about almost two months to figure out how to get it working. I'm working on Halium 5.1 CAF now. The current hybris-boot and system.img I made are not CAF; however, they only work on the CAF PM-rootfs.img. I believe this is the case because there is a bug with the hwcomposer on the non-CAF images.
Sir there is halium telegram group
Me was member once
Also ubport there is group (telegram)
[email protected] said:
Sir there is halium telegram group
Me was member once
Also ubport there is group (telegram)
Click to expand...
Click to collapse
I'm members of both groups, as well as Plasma Mobile and Sailfish OS (Jolla).
xreactx said:
I'm members of both groups, as well as Plasma Mobile and Sailfish OS (Jolla).
Click to expand...
Click to collapse
Sir Give Jolla group link
FSadino said:
In order to post on "Android Development" you must include links to your source and (if used) original source's
Click to expand...
Click to collapse
xreactx said:
I'm members of both groups, as well as Plasma Mobile and Sailfish OS (Jolla).
Click to expand...
Click to collapse
As stated by @FSadino.. This thread will get moved to the general section if you don't post sources.
Are you the builder/maintainer or is this a discussion thread?
Setting.Out said:
As stated by @FSadino.. This thread will get moved to the general section if you don't post sources.
Are you the builder/maintainer or is this a discussion thread?
Click to expand...
Click to collapse
Yes, i am the builder for the Halium 7.1 image for the OnePlus One. The original sources are provided in the porting guide.
xreactx said:
Yes, i am the builder for the Halium 7.1 image for the OnePlus One. The original sources are provided in the porting guide.
Click to expand...
Click to collapse
They need directly posted here, if you'd like to be in the development section. Please look at similar threads, all include them as it is obligatory per XDA rules and GPL guidelines..
https://www.google.fr/amp/s/www.xda-developers.com/xda-developers-and-the-gpl/amp/
[email protected] said:
Sir Give Jolla group link
Click to expand...
Click to collapse
https://t.me/sailfishosnews
This looks great. A couple of questions / points:
The link to the porting guide seems to be broken ("there's nothing here yet"), and I was interested in how this was done, as I'd like to try myself.
When performing the script install from a computer, is the phone supposed to be in fastboot, or recovery?
xreactx said:
sorry for the delay, I'm usually trolling XDA developers forums and not the oneplus forums. I'll try to list the steps.
Prerequisite: You must have a rooted phone with TWRP recovery and wiped your device clean.
1. Download my hybris-boot.img and system.img from the google drive link provided above.
2. Install hybris-boot.img to your OnePlus One's boot partition using twrp. (or thru fastboot: sudo fastboot flash boot hybris-boot.img)
3. Clone the Halium flash install repo (https://github.com/Halium/halium-scripts/) to your computer.
4. Download the Plasma-Mobile rootfs. (http://images.plasma-mobile.org/rootfs/)
5. Relocate to the system.img and Plasma-Mobile rootfs to your halium-scripts directory on your computer.
6. While your OnePlus One is connected to your computer from TWRP recovery, execute the following command: ./halium-install pm-rootfs-20171011-131506.tar.gz system.img (substitute whatever pm-rootfs release date you download in the command)
7. Experiment with Plasma-Mobile once it loads after installing.
Click to expand...
Click to collapse
Hello mate, I was following your guide on oneplus forum and got stuck in step 6. I have rebooted my phone into TWRP and connected it to my PC running windows 10 via the USB cable, opened CMD from halium-scripts folder and ran ./halium-install pm-rootfs-20171011-131506.tar.gz system.img , This is what i got.
'.' is not recognized as an internal or external command,
operable program or batch file.
Sorry if this is a silly question. Can you clarify how to properly connect and execute this command?. Thanks in advance for the help.
aukdrck said:
Hello mate, I was following your guide on oneplus forum and got stuck in step 6. I have rebooted my phone into TWRP and connected it to my PC running windows 10 via the USB cable, opened CMD from halium-scripts folder and ran ./halium-install pm-rootfs-20171011-131506.tar.gz system.img , This is what i got.
'.' is not recognized as an internal or external command,
operable program or batch file.
Sorry if this is a silly question. Can you clarify how to properly connect and execute this command?. Thanks in advance for the help.
Click to expand...
Click to collapse
You need a linux distro to run the command if I am correct.
Doesn't work for me
xreactx said:
I've compiled the Halium 5.1 (CAF variant) for the OnePlus One. This one seems to be alot more responsive than Halium 7.1.
Click to expand...
Click to collapse
Tryed to install it (after Ubuntu Touch, if necessary), but it didn't work. Stucks on boot screen.
Hey Guys,
Anyone tried Postmarket Os on the OnePlus One ? i tried both pllasma mobila and phosh but I'm getting a black screen after booting to the system
OnePlus Guru said:
Hey Guys,
Anyone tried Postmarket Os on the OnePlus One ? i tried both pllasma mobila and phosh but I'm getting a black screen after booting to the system
Click to expand...
Click to collapse
I would recommend to try first LineageOS (official one). When you get it running you can try other ROMs if you want.
Related
Hello all,
I'm getting prepared to upload my Alpha 2 port of Bodhi Linux for our Iconia. The thread for the original release is here. In the next few days, I'll be uploading the files to my server, writing up guides, and taking any questions. I highly recommend installing a GNU/Linux distribution before even attempting this. Using Linux in a VirtualBox *should* work, but I can't promise that. As usual, if this product bricks your device, it's not my fault. By attempting to use this release, you agree that it is not my fault. The same goes for instantaneous combustion, natural disasters, and acts of God.
New Features:
New recovery.img compiled using the Iconia, not at x86 processor (dunno if this means anything)
The ability to download, compile, and install the kernel/modules right from the device, no computer needed (after initial installation).
mkbootimg and mkbootfs
Scripts to automate grabbing the files needed for WiFi to work
Untested (May work, but I didn't have time to play with):
Bluetooth
Sound
3D acceleration
Here are the links needed to get started (not done yet):
[Guide] Installing Bodhi Linux onto the Iconia
[Guide] Compiling/Installing your own kernel!
[Download] Bodhi Linux for Iconia
[Download] recovery.img
[Download] Kernel Source
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'd like to thank everyone who made Alpha 2 possible, including all kernel devs, etc. I'd also like to thank Jeff over at the Bodhi Linux forums.
Please ask as many questions as you'd like, even before Alpha 2 is released.
UPDATE:
The image is now up. Use gparted to partition your micro sd as follows: at least 1.5 GB (i think, it could be more) as the first partition, ext4 format. Name that partition "bodhi". Partition 2: atleast 128 MB, fat32 format. When done, mount partitions. Extract the bodhi tarball to the root of your card. Do it like this:
sudo su
cd /media/bodhi/
tar -jxvf /home/name/bodhi_alpha2.tar.bz2
Then type in ls, you should see etc , home, and the like. If you see a folder, you did it wrong.
Copy recovery.img to the 2nd partition. In Acer Recovery Installer, flash it using this custom image. Copy your nvram.txt to the card as well. Reboot into recovery. Enter the terminal. Type in setupwifi . This will copy nvram.txt to the correct place. I'll be writing up some official guides to get this working. BTW, what do you guys think of Plasma Active Two?
UPDATE (23 / 02 / 2012) : Bodhi will be on the backburner for a while. I've school stuff to do, and will be playing around with the leaked ICS.
It is very good
- Have you tested backlight regulating?
- Can you patch the kernel to overclock tegra?
Do you still need an 8 gig micro sd card for this? you mentioned something in alpha 1 about that being fixed in later versions. I really want to try this on an old 4 gb sd card so hopefully that might be enough
Great work btw! keep it up!
loband_ml said:
It is very good
- Have you tested backlight regulating?
- Can you patch the kernel to overclock tegra?
Click to expand...
Click to collapse
I have not tested backlight regulating yet.
I'm not too good at kernel patching, but anyone who wants to play with the kernel will just have to type in "getkernel" and it will dl & unpack it.
Thanks for your interest!
chaosking121 said:
Do you still need an 8 gig micro sd card for this? you mentioned something in alpha 1 about that being fixed in later versions. I really want to try this on an old 4 gb sd card so hopefully that might be enough
Great work btw! keep it up!
Click to expand...
Click to collapse
It may work on a 4GB, I'm going to be doing some testing w/ one today. The current 8GB I'm using is only Class 4, and Bodhi works pretty well on this older card of mine.
I'm sounding repetitive, but thanks for your interest as well! At first, I didn't think anybody would care about this too much.
When can we expect the required files to be uploaded? (an estimated day perhaps?). And do USB peripherals work (e.g keyboard/mouse) and camera work? And do you think either eclipse or netbeans IDE will work when installed?
Will this work with any Linux distribution?
I was wondering if your Linux recovery kernel will work with other rootfs images like ubuntu or kde or backtrack?
newbkilla said:
When can we expect the required files to be uploaded? (an estimated day perhaps?). And do USB peripherals work (e.g keyboard/mouse) and camera work? And do you think either eclipse or netbeans IDE will work when installed?
Click to expand...
Click to collapse
It should be up tomorrow, but my ISP sucks. I'll try getting it up. I've noticed that usb keyboards and mice do work. The apple mouse doesn't, but that's probably just a kernel module I didn't compile. I'll get that in the next version, or you could compile your own, which is very fun to do (seriously, on of my favourite hobbies.) No clue on the cameras, haven't tested. Eclipse / Netbeans may work, you'll have to test and post the results, please.
chrisnave1 said:
I was wondering if your Linux recovery kernel will work with other rootfs images like ubuntu or kde or backtrack?
Click to expand...
Click to collapse
Yes, it works with Ubuntu. I'm pretty sure you could load kde up on the bodhi image, log out, then select it as your sessions. It may be slow. I recommend taking a look at the Plasma Active 2 interface, built by the KDE folks. It's pretty sweet. I've just got done downloading backtrack, and it may work. Not sure, either.
backtrack
could you possibly upload a backtrack raw image for our iconia... would love it, would also entice me to donating hehe
chrisnave1 said:
could you possibly upload a backtrack raw image for our iconia... would love it, would also entice me to donating hehe
Click to expand...
Click to collapse
GEEZ! I upload one or two distro ports and now YOU want ME to work on ANOTHER one?!?
Lol, jk. I love backtrack, of course I'll work on it.
Also, can you include the florence keyboard into the rootfs in the next releases?
I have troubles with it`s compiling (becouse i am noob)
I look forward to)
wow thanks much I am still an infant when it comes to compiling kernels or even rootfs image lol... I I was able to get aitcrack-ng but not gerix yet cannot find good repository for bt5 to add
So, I now have the images up on the site. The next day or so I'll be working on an in-depth tutorial. I'll also post a tutorial for downloading / compiling the sources straight from the device.
and can not install on internal memory?
dimon2242 said:
and can not install on internal memory?
Click to expand...
Click to collapse
With the current kernel, no. I stay away from that for now, to prevent bricking. You can compile a kernel using the source to aim at the internal card. This is not reccomended, and I take no responsibility for anything done.
Backtrack anytime!
I'm interested for Backtrack for sure.
This website might be helpful for backtrack:
http://roms.tiamat-dev.com/tiamat_xoom/backtrack-5-with-aircrack-for-motorola-xoom/
It seems possible to use USB wireless adapter and drivers with the Xoom, I am in the office for too long this week and I'm starting to look at that very closely.
Running an RTL8187 monitor on backtrack on Iconia A500 might be something that could be done...
djxtabay said:
I'm interested for Backtrack for sure.
This website might be helpful for backtrack:
http://roms.tiamat-dev.com/tiamat_xoom/backtrack-5-with-aircrack-for-motorola-xoom/
It seems possible to use USB wireless adapter and drivers with the Xoom, I am in the office for too long this week and I'm starting to look at that very closely.
Running an RTL8187 monitor on backtrack on Iconia A500 might be something that could be done...
Click to expand...
Click to collapse
Thanks for the link. You see, we don't have to worry about making Android compatible drivers. On the Iconia, my kernels don't boot under chroot. They load themselves, then point at any chosen partition. Simply compile the needed driver in the kernel, flash it, (or just load the module), and go from there.
i had in mind internal SD card)
dimon2242 said:
i had in mind internal SD card)
Click to expand...
Click to collapse
I'll compile you a special kernel to boot to internal memory. Which partition (mmcblk0px) do you want it to boot to? I cannot verify it will work. It may brick your device. I am not responsible for anything that may happen.
I type debian and debian for username and password and I recieve the following error message:
"GDM could not write to your authorization file. This could mean that you are out of disk space or that your home directory could not be opened for writing. In any case, it is not possible to log in. Please contact your system administrator."
/edit to add image taken on my phone.
============================================================
SAMSUNG GALAXY S3 with UBUNTU
============================================================
So I really wanted to try and use Ubuntu on my Samsung Galaxy S3, cause I already placed an order for the MHL cable so that i can hook it up to my monitor. (and also a docking station). And I think thats just awesome.
Now my plan is to show UBUNTU for android (ubuntu.com) in progress by Canonical that the SAMSUNG GALAXY S3 is the right phone for this.
And beside i think this phone has a lot of potentional.
I even like the idea that in a few months maybe some genius can figure out a dual boot system between "android & windows 8 ARM".
But now I had alot of problems figuring out how to get ubuntu to work on my Samsung Galaxy S3.
So I decide to write a short how-to.
============================================================
HOW-TO
============================================================
Now first of all, credits go to the maker "zacthespack" of the following app "ubuntu installer"
As he suggests please first try the free version and after that buy the paid version since you have more options...
IMPORTANT:
I wrote this thread for the Samsung Galaxy S3 and I will call this further SGS3.
Your SGS3 needs to be rooted and I also installed the OMEGA v4.0 rom.
Since you need a kernel with loop support.
(maybe the insecure kernel with you'll get with the rooting is also good enough, I am not sure)
ALSO
Be sure to have usb debugging on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Further more:
THIS IS BASED ON VNC VIEWER AND REQUIRES INTERNET PREFERABLE WIFI. THIS IS NOT A FULL EXPERIENCE LIKE ON YOUR COMPUTER. HOWEVER THIS IS A TASTE OF THE FUTURE TO COME.
STEP 1:
So when installed, run the "ubuntu installer" app and it will show you that you need 3 more apps:
- VNC Viewer
- Android Terminal Emulator
- Busybox
STEP 2:
After installing those you can download the ubuntu file.
But not the script!
Now the orginal script is the problem, somehow this script cannot be friends with the SGS 3.
STEP 3:
So I re-wrote the one from "zacthespack"...
ubuntu.sh
click to download.
STEP 4:
This script and the ubuntu file you chose to download (small, medium or large) you put these in to a folder called "Ubuntu" place this folder in your "home map" of your phone. This map is called "SDCARD" not to confuse with your "extSDCARD" which is your external sdcard.
STEP 5:
now run the terminal and type:
Su
cd /sdcard/ubuntu
sh ubuntu.sh
after that you will get alot of text and it will ask you which resolution you want.
Well since the SGS 3 is a 720p phone you type:
1280x720 now you get alot of text again.
Then the terminal will ask the following:
safe this as default? (y/n)
Well "N" which means "no" and "Y" means "yes" ofcourse.
So this means it will remember the resolution etc.
Then you'll get this screen:
sometimes the terminal will ask you to put in a password 2 times
password is : "ubuntu"
proceed to the next step
STEP 6:
go back to your homescreen and open the VNC viewer.
I type following:
click CONNECT... and voila
if you did everything right you will get this:
this is a picture of ubuntu on my phone... so you see it works...
============================================================
Questions:
============================================================
Please on this thread...
and if anyone wants a short movie seeing it actually work, please ask then I will upload this...
First
Sent from my heart
feedback
BTW this is my first how-to thingy...
so if anyone has something to add or some feedback let me know...
Anyone?
How can i keep the picture from disepearing???
I will give it a try and let you know.
Sent from Rooted debloated stock Galaxy S3 OG I9300
Can the s3 wifI support injection mode in backpack for use with reaver ? That would be awesome.
Sent from my GT-I9300 using XDA
tiborr said:
BTW this is my first how-to thingy...
so if anyone has something to add or some feedback let me know...
Anyone?
How can i keep the picture from disepearing???
Click to expand...
Click to collapse
Just upload them to another photo-hosting site and use the direct link for embedding them in your post.
Thanks for the guide!
Thank you so much ! This is the only advantage of such a great hardware that ain't needed on a phone.
But as a fully working computer always to go it's great.
I will try later when everything is tested because I'm not developing just using.
Please keep your nice tutorial alive!
Gesendet von meinem GT-I9300 mit Tapatalk 2
A small problem.
Ok, downloaded and extracted all the ubuntu stuff in /sdcard/ubuntu and also placed your script in the same folder but when i go to the terminal and type sh ubuntu.sh it shows me some errors
Code:
ubuntu.sh[6]:cut: not found
ubuntu.sh[17]: synatx error: 'If' unmatched
here's the screenshot
Using Omega v4.0
Thank you
What MHL cable and docking station have you ordered because apparently a working MHL cable is yet to be released?
Ebay friend... now the s3 uses a higher MaH then for example the s2.
So you need to buy a mhl for s3 and not someone who advertises for "mhl for s2, nexus and s3" this wont work.
123shree said:
Ok, downloaded and extracted all the ubuntu stuff in /sdcard/ubuntu and also placed your script in the same folder but when i go to the terminal and type sh ubuntu.sh it shows me some errors
Code:
ubuntu.sh[6]:cut: not found
ubuntu.sh[17]: synatx error: 'If' unmatched
here's the screenshot
Using Omega v4.0
Thank you
Click to expand...
Click to collapse
Same Problem Here.
123shree said:
Ok, downloaded and extracted all the ubuntu stuff in /sdcard/ubuntu and also placed your script in the same folder but when i go to the terminal and type sh ubuntu.sh it shows me some errors
Code:
ubuntu.sh[6]:cut: not found
ubuntu.sh[17]: synatx error: 'If' unmatched
here's the screenshot
Using Omega v4.0
Thank you
Click to expand...
Click to collapse
Do you have usb debugging on?
And do you have busybox installed?
And the busybox i refered to in the how-to other versions of busybox do not seem to work with this.
Did you use my script?
Toss3 said:
Just upload them to another photo-hosting site and use the direct link for embedding them in your post.
Thanks for the guide!
Click to expand...
Click to collapse
Thanks works like a charm!
Same problem. Didn't install busybox from app, got one from the market.
I also only got this error message:
"ubuntu.sh[17]: synatx error: 'If' unmatched 1"
Usb debugging is enabled.. im running Omega v3
Saull said:
What MHL cable and docking station have you ordered because apparently a working MHL cable is yet to be released?
Click to expand...
Click to collapse
When i received my cable and docking station I will make a short vid and show you.
Also I will give the link to the seller...
jee82 said:
Same problem. Didn't install busybox from app, got one from the market.
I also only got this error message:
"ubuntu.sh[17]: synatx error: 'If' unmatched"
Usb debugging is enabled.. im running Omega v3
Click to expand...
Click to collapse
I am not familar with this error.
However i would suggest to remove busybox and uninstall the busybox app and VNC viewer. Be sure to use the same as I described.
And I used UBUNTU large image and my script.
If it still does not work.
Please remove all above and the ubuntu installer and image etc..
And try backtrack installer, but then use the script which is supplied with the installer.
This mostly works right away. There is something odd about ubuntu v12.
But you should get it to work, like i did.
I would just tell, that i run ubuntu on my galaxy s 3 with just the cf kernel. No need to run omega rom, but it maybe runs better with omega if it uses less ram, then stock. I also have the ubuntu image on the external sdcard and i runs alright from there, again it may run faster from the internal SD - so instead of writing cd sdcard/ubuntu i just write cd mnt/extSdCard/ubuntu
Just wanted to tell that it's possible to run with stock rom and from external SD(3,5 GB is alot on the internal SD when i only have the 16GB version)
Sent from my GT-P1010 using xda premium
"ubuntu.sh[17]: synatx error: 'If' unmatched" Problem
I think you are receiving this error because the Ubuntu image is inside ubuntu1204-v2-full (or your corresponding folder) not inside /sdcard/Ubuntu. Just move the image from that folder to /sdcard/Ubuntu and it should work.
Same problem here and I have copied the files to the right folder. I'm running stock rom with the insecure kernel and busybox installed using busybox installer.
How well does it run on the phone? I wanna do this so i can finally go play some java games on the net xD
OFFICIAL TWRP SUPPORT HERE:
http://forum.xda-developers.com/htc-one/development/recovery-htc-one-dual-sim-802w-802d-t2982133
TeamWin Recovery Project (TWRP) version 2.8.1.0HTC Dual Sim 802w
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots shown in Spanish (by me) but attached for download here is the English version
I put together a little self-extracting Windows package that does all the job for you (includes adb, dlls & fastboot) and flashes the recovery on your phone.
Credits: INSPEKT0R @ 4pda.ru, quens @ bbs.gfan.com, Dees_Troy @ TWRP IRC, @Flyhalf205, TeamWin, Freize @ 4pda.ru
Please note that the Automatic Script erases Cache for safety. If you get into recovery straight away after flashing Cache partition won't mount until you Wipe it. This will not happen if you reboot directly into Android as it will get regenerated on start up.
Downloads: (I ONLY TESTED THIS ON MY OWN DEVICE SO TRY AT YOUR OWN RISK -- MAKE A BACKUP FIRST)
2.8.0.2 Sense: http://goo.gl/KLTZBu (unzip & run executable) - Windows
2.8.0.2 Sense: http://goo.gl/uPV9ti IMG TWRP file (for manual install, not needed if running Automatic Script)
2.8.1.0 Play: http://forum.xda-developers.com/showpost.php?p=56429709&postcount=76 IMG TWRP file (thanks to @bgcngm)
- Screenshot support! Press Power + Vol- to capture the screen.
- HTC Sense theme by Freize @ 4pda.ru
What's new in 2.8.1.0:
MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
TrueType Font support - optional as it takes up a decent amount of space so may not be available on all devices - thanks to Tassadar
Temperature support - thanks to bigbiff
Various other bugfixes and tweaks
What's new in 2.8.0.2:
Fix a bug that caused weird graphics and touch issues
Add MTP support to recovery thanks mostly to bigbiff with a little help from Dees_Troy
Add command line capabilities - you can now execute various TWRP features via adb instead of the touchscreen
Add support for color in the console and give error, warning, and highlight lines different colors
Track backup and restore progress based on file sizes to provide a much more accurate indication of progress
Improve handling of /misc thanks to mdmower
Improve setting of time on Qualcomm devices thanks to [NUT]
Allow using images on slidervalue GUI objects thanks to Tassadar
Allow using variables and addition and subtraction in variables for easier theming
Add support for 1440x2560, 280x280, and 320x320 resolutions and update 240x240
Allow ui.xml file to include additional xml files to help break up the theme and make TWRP easier to maintain
Other minor fixes and improvements
Note: 2.7 marks the first time that we are dropping support for older devices. We are doing this because of the SELinux support needed to install 4.4 Kit Kat ROMs. The non-TWRP parts of the recovery image have to be built in at least a 4.1 tree and the kernel that is included in the recovery image has to support writing SELinux contexts. We don't own most of the devices that we support so we depend on outside testers and developers to help us update devices. In many cases we can't find someone readily. Come to #twrp on Freenode if you want to help bring your device up to date. You can tell right away if your device will support 4.4 ROMs in 2.7. Boot TWRP and press the console button (the square-ish button either in the bottom middle or upper right) to view the console output. If it doesn't say "Full SELinux support" in the console, then your device still needs some work. Help us help you.
OLD VERSIONS:
2.7.0.0b: http://goo.gl/gjY0ep (unzip & run executable) - Windows
2.7.0.0b: http://goo.gl/pfDPJ4 IMG TWRP file (for manual install, not needed if running Automatic Script)
- Supports SD Card and USB OTG
- SELinux Kernel Support
2.7.0.0a: http://goo.gl/mlb7rV (unzip & run executable) - Windows
2.7.0.0a: http://goo.gl/gY2sLq IMG TWRP file (for manual install, not needed if running Automatic Script)
- Supports SD Card and USB OTG
2.6.3.4: http://goo.gl/T0j0g2 (unzip & run executable) - Windows
- Supports SD Card and USB OTG
- Works with KitKat according to @criszz
2.6.3.3: http://goo.gl/XrFIQY (unzip & run executable) - Windows
- Supports SD Card (tested) and USB OTG (tested)
2.6.3.0: Automatic Script (unzip & run executable) - Windows
2.6.3.0: IMG TWRP file (for manual install, not needed if running Automatic Script, unzip first)
If you find yourself in TWRP with no working touch, you can use adb reboot bootloader to reboot again and flash another recovery.
Android 4.1 or 4.2?
Thanks a lot for sharing this mate, I was just wondering if you are running a 4.1 or 4.2 software?
Rukavi said:
Thanks a lot for sharing this mate, I was just wondering if you are running a 4.1 or 4.2 software?
Click to expand...
Click to collapse
I'm running MaximusHD 1.0.2, so 4.2.2.
Has anybody else tried this? Still working perfectly on my phone.
Thanks
J_M_V_S said:
Has anybody else tried this? Still working perfectly on my phone.
Click to expand...
Click to collapse
You are a star....
It worked perfectly on mine too........
Thanks a lot..............
You can flash TWRP img with the Flashify app in the Play Store. Very easy.
Sent from my GT-P7510 using XDA Premium 4 mobile app
Haha, good one, do you have dual sim One?
Sent from my HTC 802w
asim26 said:
You are a star....
It worked perfectly on mine too........
Thanks a lot..............
Click to expand...
Click to collapse
No problem. Thanks for voting.
There seems to be some people with no touch working...I wonder why? Maybe there different boards in the same 802w model?
jbh00jh said:
You can flash TWRP img with the Flashify app in the Play Store. Very easy.
Sent from my GT-P7510 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try to do this on a HTC One 802w and let me know how it goes! :silly:
Will this work on 802d?
Sent from my EG680 using xda app-developers app
otonieru said:
Will this work on 802d?
Sent from my EG680 using xda app-developers app
Click to expand...
Click to collapse
Flash it and see. If it doesn't work you can always flash another recovery using flashboot commands.
Please report back your findings.
BRICKED HTC ONE 802w WEIBO
Hy guys,
I pretty glad that you could make it up. :cyclops:
It looks great but unfortunately didn't work for me. :crying:
Well I'm newbie so not so expert in doing all those operations.
On top, I am... French (...nobody's perfect!) and try through the language to catch your posts.
Not so easy.
Actually I have HTC One 802w (M7CDUG PVT) Weibo from China Unicom,
After many attempts I download Moonshine for S-OFF but now now I am stuck on the WEIBO logo of 1st page...
No rooting possible. called.. .er... Bricked? oui?
Damn! it was working more or less (except the Chinese apps I can't read + competition in between Google Play and HTC Market).
But at least, working great.
Situation is like having the latest Bugatti Veyron and can't shift the 3rd speed... Frustrating!
The mobile is not any more recognized when plugged to computer, Only Distiller can detect it... to end with error!
But if someone can post me a lead (at least) it would make my day or my Xmas...!!!
Meantime someone can post something, I sincerely wish you all a very Happy Time to all XDA members, Developpers, Contributors, etc.
Looking forward to reading you.
Bextonbeck
Major update!
Thanks to the TWRP support I was able to port the latest version of TWRP to the Dual Sim. So from now on I will try to keep this thread updated with the latest version when its available (and when I have time).
Please check the OP for download link.
Has anybody tested the 2.6.3.3 version?
OP Updated with TWRP 2.6.3.4
will work with KK?
criszz said:
will work with KK?
Click to expand...
Click to collapse
I can tell you that somebody tried to install KitKat using TWRP 2.6.3.4 with no success. I don't know if that means that it cannot work with it.
From what I can gather from your posts, you seem very knowledgeable, so you can just go ahead and try and if it doesn't work just flash another recovery.
J_M_V_S said:
I can tell you that somebody tried to install KitKat using TWRP 2.6.3.4 with no success. I don't know if that means that it cannot work with it.
From what I can gather from your posts, you seem very knowledgeable, so you can just go ahead and try and if it doesn't work just flash another recovery.
Click to expand...
Click to collapse
Just asked because i don't have KK yet . For now i still use Soul 20 and Philz revovery. Your TWRP is working very well on JB and that's make me to move to it along with KK updatate . Also just managed to install TWRP on my new Lenovo yoga tablet and i like-it.
Edit: just for info, your TWRP work is very apreciated on russian forums and has very good feedback.
criszz said:
Just asked because i don't have KK yet . For now i still use Soul 20 and Philz revovery. Your TWRP is working very well on JB and that's make me to move to it along with KK updatate . Also just managed to install TWRP on my new Lenovo yoga tablet and i like-it.
Edit: just for info, your TWRP work is very apreciated on russian forums and has very good feedback.
Click to expand...
Click to collapse
If you ever try it on KK please report back to update the OP.
That's great about Russian forums, a little credit would be appreciated though!
After installing TWRP 2.6.3.4 phone off charge, the phone will crash!
Link To Main Thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About
The WinDroid Toolkit is a Windows program built in Visual Studio using the C# programming language that simplifies the rooting process for many Android devices. The toolkit makes it easy to unlock your bootloader, flash a custom recovery and gain permanent root. It also includes other functions such as flashing kernels, pushing files and installing apps. If you find it helpful, give me a thanks and a donation if you can. If you find a bug or have a feature request, feel free to leave a reply. Thanks!
Download
WinDroid Toolkit
Changelog
Check out this document for current and past changelogs.
Supported Devices
Check out this spreadsheet for a list of currently supported devices.
Device not supported? Make a request here!
Contribute
Check out the source code on GitHub here.
Disclaimers
Please do not post, mirror, or take credit for this toolkit or any related work without explicit permission.
I am in no way responsible for any harm, damage, nuclear fission or bee infestation that may occur to your device through the use of this toolkit.
Reserved
Reserved.
THANK YOU
Thank You for your work.
The software works like a charm and looks good too.
Its a brilliant and hassle free way to perform adb actions.
program crashes all the time
Windows 7 Pro x64
gajrut said:
program crashes all the time
Windows 7 Pro x64
Click to expand...
Click to collapse
I am using windows 10 x64 and the program works absolutely fine.
To resolve your problem try running the program as administrator.
I did run as admin
Hello, thanks for work. It will supports the linux in the future?
A bit of a Problem
Device: cancro
ROM: MOKEE v50.2
Recovery: TWRP v2.8.5
Program used: WinDroid Universal Android Toolkit v2.2
Operating System (PC): Windows 10 x64
Thank You @WindyCityRockr for developing the above mentioned Program and supporting our cancro for it.
I am able to use your program flawlessly when i am using my current ROM.
BUT
when the phone is in FASTBOOT or RECOVERY Mode even though your software recognizes my device and its state but is unable to perform any actions. After clicking on a task it says No Device Found.
I have all the ADB and Fastboot drivers required, installed on my PC.
Your help would be greatly Appreciated.
Wow it looks awesome
maybe i am a noob, but i cannot connetc with my mi3 with last smiui.
I use win 8.1, i am administrator and i have debug usb activated.....
I don't undestand....
WinDroid Universal Android Toolkit v2.3 Now Out!
I'm happy to announce that the WinDroid Universal Android Toolkit v2.3 update is now out! It includes a bunch of new features, fixes and supported devices, so check it out and let me know what you think! :fingers-crossed:
You can download it here.
WinDroid Universal Android Toolkit v2.5 Now Out!
I'm happy to announce that the WinDroid Universal Android Toolkit v2.5 update is now out! As always, let me know what you think and report any bugs you encounter! :highfive:
You can download it here.
WinDroid Toolkit v3.0 Is Now Out!
WinDroid Toolkit v3.0 has been released! It's a huge update with a material redesign, major recode and support for 43 new devices!
You can out more specific changes in the changelog here.
You can download the new update here.
All versions before v3.0 will not have their files updated anymore since I've moved from hosting on BasketBuild to Amazon S3. Please update to v3.0 to ensure you're getting the latest recovery and root files!
Can this tools used for any devices? Or only for mi 3, thx before.
Sorry case clear... First time using tapatalk going to last page.
Sent from my MI 3W using Tapatalk
LuckySiKuple said:
Can this tools used for any devices? Or only for mi 3, thx before.
Sorry case clear... First time using tapatalk going to last page.
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
There's a long list of manufacturers and devices in it, so yes it can be used for other devices too.
Fikshun said:
There's a long list of manufacturers and devices in it, so yes it can be used for other devices too.
Click to expand...
Click to collapse
I want to install this software, but ot said that i dont have ADB driver, "ADB DRIVERS! You are missing bla bla bla. " where i can actually dowdload it manualy, my computer doesn't have a connection, so i want to download it manualy trough my HH. Thx
Sent from my MI 3W using Tapatalk
My computer doesn't have internet connection. Can i use this tools, actualy it said "adb wrong, it missing...." And it tell me that i have to download, can i download it manualy trough my HH?
Sent from my MI 3W using Tapatalk
LuckySiKuple said:
I want to install this software, but ot said that i dont have ADB driver, "ADB DRIVERS! You are missing bla bla bla. " where i can actually dowdload it manualy, my computer doesn't have a connection, so i want to download it manualy trough my HH. Thx
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
yes just install minimal adb drivers, it'll still ask you to install it choose no instead.
For proper working of windroid make sure usb debugging is turned on and when your phone asks for granting permission to PC, grant it.
From the list of phones available if you choose your phone it'll give you an error happened with me, don't panic just press the drop down arrow to hide the phones list.
Now, you'll have 3 tabs choose commands tab, select reboot device if it works then you've succeeded if not then maybe install your device specific drivers.
Note that if you choose to flash any files it'll ask you to choose the file.
Hope This Helps
---------- Post added at 09:27 AM ---------- Previous post was at 09:25 AM ----------
Fikshun said:
yes just install minimal adb drivers, it'll still ask you to install it choose no instead.
For proper working of windroid make sure usb debugging is turned on and when your phone asks for granting permission to PC, grant it.
From the list of phones available if you choose your phone it'll give you an error happened with me, don't panic just press the drop down arrow to hide the phones list.
Now, you'll have 3 tabs choose commands tab, select reboot device if it works then you've succeeded if not then maybe install your device specific drivers.
Note that if you choose to flash any files it'll ask you to choose the file.
Hope This Helps
Click to expand...
Click to collapse
Edit: And you don't need to install it it's portable make sure to run it as administrator
I've installed mini adb long before try this tools, and every thing is ok, i ever flash using adb before. And all fine. But when i tried to run this tools, (with run as admin too). It said " adb . . . . missing " something like that, i forgot . and i choose no, but when i choose Xiaomi mi3 (my device) , another warning come out, but at bottom left, it writted "online".
I try to root but cant click at that option.
Sory for my bad english
Sent from my MI 3W using Tapatalk
LuckySiKuple said:
I've installed mini adb long before try this tools, and every thing is ok, i ever flash using adb before. And all fine. But when i tried to run this tools, (with run as admin too). It said " adb . . . . missing " something like that, i forgot . and i choose no, but when i choose Xiaomi mi3 (my device) , another warning come out, but at bottom left, it writted "online".
I try to root but cant click at that option.
Sory for my bad english
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
try using the commands tab that should work
A thread for everyone from everyone! Noob friendly and a home for every newcomer!
Thread rules:
1. Respect xda rules regarding conduct. (Rule no. 2 here)
2. All questions allowed by xda rules are welcomed.
3. Your questions must show that you want to learn. No one will criticize you because you are trying to learn.
4. Ask politely no matter how desperate you might be.
5. Do not post or request warez. XDA rule 6 here.
6. There are no bad questions, but only bad intentions and bad answers.
7. Don't use this thread as an excuse to ask all kinds of questions everywhere in the forums, especially in development threads. This is why this thread is for.
8. For all who want to help, do that kindly according to the rule 2.3 of xda
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Work In Progress
Android related questions
Q: What is a smartphone?
A: ... just kidding, you are way past that!
Q: What is an android ROM?
A: Android Read-Only Memory. A file containing the Android operating system and its apps. The "stock ROM" comes preinstalled on the phone.
Q: What is a custom ROM?
A: A custom ROM replaces your device's preinstalled Android operating system (or Stock ROM), normally stored in read-only memory, with a new version of the Android operating system.
Q: What is a kernel in android?
A: A kernel is the component that helps the applications communicate with the hardware. It manages the system resources, communicates with external devices when needed, and so on. Android uses a variation of the Linux kernel. The kernel is the bridge between the ROM and hardware.
Q: Rooting-What is it?
A: Rooting is the process of allowing users to attain privileged control (root access) over various Android subsystems. As Android uses the Linux kernel, rooting an Android device gives similar access to administrative (superuser) permissions as on Linux. Rooting gives the ability (or permission) to alter or replace system applications and settings, run specialized applications that require administrator-level permissions, or perform other operations that are otherwise inaccessible to a normal Android user.
Q: What is a recovery in android?
A: In Android, recovery refers to the dedicated, bootable partition that has the recovery console installed. It is accessible with a combination of key presses, or instructions from a command line.
Q: What is Stock Recovery?
A: The Recovery that comes with your Android Device from the manufacturer is called Stock Recovery. Stock recovery can be used to flash updates from an update.zip file, OTA Updates, for factory reset etc.
Q: What is a Custom Recovery?
A: From stock recovery, we cannot flash Custom ROMs, Modules etc. For this, you need to flash custom recoveries like TWRP. Flashing a custom recovery overwrites the system recovery. Custom Recoveries have been coded to allow for backup and restore functions, selective deletion of data so you don't have to wipe everything, and modified to allow update packages that have not been digitally signed by official sources.
Q: What does TWRP stand for?
A: Team Win Recovery Project.
Q: What does OTA stand for?
A: Over The Air Update. An OTA Update is a software update that is distributed via Wi-Fi or broadband network, making use of functions built into the operating system itself.
Note:
Noobs and newcomers: If someone answers you and the answer is helpful to you, press the "thanks" button for that person. It's a polite thing to do in the forums and saves you from creating a post just to say "thanks".
And remember: there are those that are noobs and those that were noobs!
Credit: Google.com for helping me to search, select, format and prepare some of the answers for easy reading.
Thanks for doing this. Been thinking of making one myself but you beat me to it. I'll help you out with answering whenever I can.
joeyhuab said:
Thanks for doing this. Been thinking of making one myself but you beat me to it. I'll help you out with answering whenever I can.
Click to expand...
Click to collapse
Welcome on board!
Now that is a good thread, I do really hope people would ask here now instead of making separate threads.
Xadus said:
Now that is a good thread, I do really hope people would ask here now instead of making separate threads.
Click to expand...
Click to collapse
We can ask the moderators to make this thread a sticky. So it will be always visible.
My device is rooted. I m use substratum in my device.. I m using a theme in substratum for 2 week ago but today I try to install & apply a new one but once I did that my device itself restart & Showing me a message " Android system load failed.. Your Data maybe corrupted , Please do a reset factory " but I want to back my device without loosing my data... What can I do. Please anyone help me..This is error
shafayetsabbir3 said:
My device is rooted. I m use substratum in my device.. I m using a theme in substratum for 2 week ago but today I try to install & apply a new one but once I did that my device itself restart & Showing me a message " Android system load failed.. Your Data maybe corrupted , Please do a reset factory " but I want to back my device without loosing my data... What can I do. Please anyone help me..This is error
Click to expand...
Click to collapse
Substratum creates a folder in your internal sd card with a flashable file that you can rescue your system.
Boot your phone into twrp if you have one and flash that file.
If you don't have a recovery installed, than just boot into a recovery and again flash that file.
Is there any way to resolve this issue of feb patch not getting installed
ragav_lithun said:
Is there any way to resolve this issue of feb patch not getting installed
Click to expand...
Click to collapse
Can you please give some more details? How are you installing the february patch?
Did you root your phone? Can you take a screenshot of the problem and upload it here?
varben said:
Substratum creates a folder in your internal sd card with a flashable file that you can rescue your system.
Boot your phone into twrp if you have one and flash that file.
If you don't have a recovery installed, than just boot into a recovery and again flash that file.
Click to expand...
Click to collapse
I have twrp installed bro.. What to do now?
shafayetsabbir3 said:
I have twrp installed bro.. What to do now?
Click to expand...
Click to collapse
Boot into twrp, find the folder substratum in your internal sd card and flash the rescue zip file. (Or uninstall, can't remember the exact name of the file)
I've bought a dux ducis flip cover. Any advice on how to turn on/off screen when open/close cover?
edgardurao said:
I've bought a dux ducis flip cover. Any advice on how to turn on/off screen when open/close cover?
Click to expand...
Click to collapse
Is it a smart flip cover? Link to the product details?
Hello..
I love xperia sound enhancement instead of viper or atmos.
my question are:
1. have you try installing such as mod on Mia1? is it applicable on oreo?
2. do you have any mod version recommended for mia1?
3. i'd love if it's magisk friendly any suggest?
thanks in advance for the answer..
varben said:
Is it a smart flip cover? Link to the product details?
Click to expand...
Click to collapse
Well I think it is: https://m.pt.aliexpress.com/item/32...32835263750&shortkey=bUvYjAfQ&addresstype=600
Any ideas?
varben said:
Boot into twrp, find the folder substratum in your internal sd card and flash the rescue zip file. (Or uninstall, can't remember the exact name of the file)
Click to expand...
Click to collapse
bro r u sure it will work?
For now I don't have twrp install in my device but I will boot twrp but if I found no rescue file in substratum folder then?
edgardurao said:
Well I think it is: https://m.pt.aliexpress.com/item/32...32835263750&shortkey=bUvYjAfQ&addresstype=600
Any ideas?
Click to expand...
Click to collapse
That doesn't look like a smart cover. So you can't use it to turn screen on/off by opening and closing the cover.
Sorry!
shafayetsabbir3 said:
bro r u sure it will work?
Click to expand...
Click to collapse
Can you try it? It's safe to do it.
varben said:
Can you try it? It's safe to do it.
Click to expand...
Click to collapse
Ok bro... I will try that tomorrow.. If it work then u save my life.. Actually there is lots of important data which I don't wants lose..
many people have faced with proximity sensor issue on devices such as redmi 3s, redmi note 3, note 4, redmi 4x, mi a1 and others ... the problem occurs when incoming calls, but xiaomi does not respond ... can someone look at the logs and fix this? Can someone help?
http://c.mi.com/thread-517279-1-1.html
http://c.mi.com/thread-294939-1-1.html
http://en.miui.com/thread-1341151-1-1.html
there's so many proximity sensor bug reports. Why does no one want to solve this problem? I have two devices (Mi a1, Redmy note 3 pro) with an incorrectly working proximity sensor.