I'm on stock, non-systemless root, with xposed installed. Worked without a hiccup for several weeks then recently I've been getting notifications that a bug report has been captured. I'm not sure how to interpret it, so can someone help me out? I know it's gravity box that's crashing because when I reboot I lose the option from the power menu and do it through flashify.
https://drive.google.com/drive/u/0/folders/0B2vRCvhrAUO_TlptUWI2NnZOQ2c
Thank you to those smarter than me!
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
It's working for me with android pay.
Safetynet is passing for me using Magisk v9 & phh's Superuser r266-2, but a new version of each was released last week that chatter in other forums seem to suggest device-specific trouble with. I might try but first wanted to know if anyone else in the LePro3 world already has and had problems. My current interest in safetynet is for Android Pay and DirectvNow.
suhridkhan said:
It's working for me with android pay.
Click to expand...
Click to collapse
Thanks!
robertzas said:
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
Click to expand...
Click to collapse
Linked method is outdated ever since the introduction of November security patch.
Magisk V10 and phh SU r266 working fine for me on 20s
Upgrading worked for me too and I like how safety net check is part of the new status screen.
Seems like known issue but installing Xposed caused safetynet to fail, both before and after upgrade. Uninstalling Xposed caused safety net to pass again.
Root working and safetynet still passing on my x727 after taking the Magisk Manager upgrade to Magisk 11.1 and MagiskSu.
are all of you on a stock ROM and bootloader locked, I am using lineage OS 13, but safety net fails? do you have any idea how to fix this, just wanted to use ANDROID PAY, or do I need to be on STOCK ROM, just don't like the EUI and the status bar icons and the way they look(it's just me). Any help would greatly be appreciated=)
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay. I don't see how safetynet could be expected to fully pass on a non-OEM supported ROM, especially over the longhaul of the cat-and-mouse game.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen, the settings application, and the recents screen which I tolerate so as to have safetynet.
I could not pass safety net, got CM13, with MAGISK installed. Dang=)
squandry said:
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay but I don't see how safetynet could ever pass on a custom ROM.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen and the recents screen which I tolerate so as to have safetynet.
Click to expand...
Click to collapse
Hi, Did this but after installing MAGISK, everything passed, except FINGERPRINT got disabled, says hardware not supported. Android Pay works,just went to gas station and tried it, works flawlessly. FINGERPRINT is the problem I'm seeing now. Thanks for any help.
Sent from my LEX727 using XDA-Developers Legacy app
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
squandry said:
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
Click to expand...
Click to collapse
Yup, what boot image did you install? I think the problem was the boot image I used, are you on the 20's now? thanks
I am running the aboot from dr4stic's 19s unlocked bootloader zip, everything else is from the stock 20s OTA zip.
Ok, I have spent several hours trying to make it work and now time to ask for help. I got Leeco LePro 3 with custom Ron based on EUI, and trying to get Magisk working. First I tried installing system less SuperSU and Magisk, but it failed safety check multiple times, so I tried uninstalling SuperSU and use Magisksu, but not I am not able to move forward. I installed Magisk manager and when it try to install Magisk manager it downloads but doesn't show way to install it, I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
bocondo said:
I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
Click to expand...
Click to collapse
Flashing Magisk with TWRP should work. What do you mean by it fails to update?
Has anyone managed to get the Intune Portal Hider to to work on the 6T. The version for Magisk 18.xxx gets detected in about 15 minutes. I cannot get Magisk 17.3 to pass Safetynet on the 6T, fails with "API error". The aggravating thing is that this worked without a hitch on the 5 with Magisk 17.3
Check which version of Magisk Manager you have installed. Flashing Magisk 17.3 automatically installs MM 6.0.1. Update it to 6.1.0. I ran into the same issue the other night when I updated to OOS 9.0.12. Magisk 18.1 kept failing SafetyNet checks. Uninstalled it and reinstalled 17.3. I got the same API error until I installed MM 6.1.0.
sharksfan7 said:
Check which version of Magisk Manager you have installed. Flashing Magisk 17.3 automatically installs MM 6.0.1. Update it to 6.1.0. I ran into the same issue the other night when I updated to OOS 9.0.12. Magisk 18.1 kept failing SafetyNet checks. Uninstalled it and reinstalled 17.3. I got the same API error until I installed MM 6.1.0.
Click to expand...
Click to collapse
If I could hit the thanks button 10x I would. interesting that I pass Safety Net without issues for 18
SafetyNet will initially pass on 18.x. But for me at least, after some time it will fail. Toggling Magisk Hide off/on will then allow it to pass SN again. I got a bit obsessive in checking it so it was just less to worry about using 17.3. Can't figure out where the problem is exactly since I can't forcibly reproduce it. But the other night after I updated OOS, Magisk 18.1 passed SN. I went to sleep & the next morning checked SN and it failed. I haven't had any such issues with 17.3.
sharksfan7 said:
SafetyNet will initially pass on 18.x. But for me at least, after some time it will fail. Toggling Magisk Hide off/on will then allow it to pass SN again. I got a bit obsessive in checking it so it was just less to worry about using 17.3. Can't figure out where the problem is exactly since I can't forcibly reproduce it. But the other night after I updated OOS, Magisk 18.1 passed SN. I went to sleep & the next morning checked SN and it failed. I haven't had any such issues with 17.3.
Click to expand...
Click to collapse
I have experienced exactly the same issue in both 18.0 18.1. My banking apps seem to detect root also. Got fed up with it and didn't experience any of these issues with 17.3, so just stick with this version as it does what I need it to do.
dj_ooms said:
I have experienced exactly the same issue in both 18.0 18.1. My banking apps seem to detect root also. Got fed up with it and didn't experience any of these issues with 17.3, so just stick with this version as it does what I need it to do.
Click to expand...
Click to collapse
Magisk 17.3 with Manager 6.1.0 so far is the most stable version you can get until v18 gets improved.
For me it's kinda weird. Intune Hider for 18.1 work for me. Hides what I need and all that. But my mobile data doesn't work. Disable the module and poof it's back.
Edit: Never mind. Got it by disabling a couple apps from Magisk Hide.
As in the title i haven't seen talk about Arcore in a long time. And i just wanted to ask if anyone has tried the method successfully here: https://www.celsoazevedo.com/files/android/google-camera/ar/
It describes 2 different ways (both require magisk). Both ways are changing the fingerprint to match that of a compatible arcore device (like google pixel 2).
So was anyone successful getting it to work with those methods?
Did you try it? Just saw there is an update for the magisk module
I installed it a few weeks ago. It worked, but after a while the stickers became sticky. It worked again after a restart of the phone.
device info:
Oneplus 8 Pro IN2025
Oxygen OS 11.0.99.IN11AA
Recently rooted and I was not passing SafetyNet basic Eval and I tried Riru Lxposed and still the same thing. Somewhere online I saw someone said to install Magisk Canary and it should have Denylist which should help hide apps from the root and I don't have to worry about Safetynet with Denylist. So right now I am using Zygisk with Denylist and even with that, some apps are not working like Amazon and eBay. Can't figure out any way to pass even the basic Eval for SafetyNet. I just want all my apps to work anyone figure out a way around safetynet checks or know how to make Denylist work on all apps?
Didn't think this would work but I just fixed it.
[2023 FIX] Fix Magisk CTS Profile False Error - Bypass Safetynet
Magisk CTS Profile False Error is now popping up on almost everyone's device since Google made some changes in March. To Bypass Safetynet...
droidholic.com
The Dec 23rd 2021 update was what fixed it for me. I downloaded the Zygisk fix and put it in my Magisk and was able to pass safetynet and all my apps were working!
Bump! Oddly enough I am passing safetynet but Huntington banking app is still detecting root and Amazon is not working again. Ebay app works though.
Amazon app was working but now I guess its not?
Edit: uninstalling and reinstalling the fix module lets amazon temporary for a couple minutes and then it stops working but huntington app still detects root too.
I'm still rocking a Pixel 2 XL running stock rooted 9.0.0. I've got Magisk 23.0 Stable installed and the following modules installed:
Busybox for Android NDK 1.34.1
Systemless Hosts 1.0
Riru 26.1.4.r552(etc)
Universal SafetyNet Fix 2.1.3
If it matters, I do still have TWRP installed.
I installed Riru, rebooted, installed Universal SafetyNet Fix, rebooted again, and when SafetyNet check failed, I toggled Magisk Hide off then on.
Does anyone know what might be wrong? Suggestions are very welcome!