Related
================================
Solution: http://forum.xda-developers.com/one...bootloader-locked-t3212187/page2#post63494201
================================
Hello,
This afternoon, I was preparing to flash Oxygen OS 2.1 through twrp but I wanted to make a backup first. Attempting to load up twrp by holding Vol- and Power, my OPT flashed the starting frame of the boot animation for half a second before turning off. This repeated every 5 seconds. I could still boot OOS normally at this stage.
I decided to reflash twrp so as to make the backups, but on attempting to flash it, I saw that my bootloader was locked. So into fastboot mode I went, but trying to unlock it, it did the same as trying to get into recovery. As soon as I sent the command, "fastboot oem unlock", the screen went dark, flashed the starting frame for the boot animation, and promptly when dark again.
I now can't boot up normally, nor can I enter recovery. I can access fastboot mode, but I can't seem to make any changes.
I've attempted to use this solution as well as several other similar ones with no success.
I've had my OPT since 17th of August with absolutely no signs of trouble until this afternoon.
To me, it seems like it could be a hardware issue, but I'd hope it would last more than 40 days.
Any suggestions?
Thanks.
----
x-post: whirlpool, reddit
The same just happened to me, wtf
Makrilli said:
The same just happened to me, wtf
Click to expand...
Click to collapse
What were you doing before it occurred? Perhaps we can work out the cause.
GusGold said:
What were you doing before it occurred? Perhaps we can work out the cause.
Click to expand...
Click to collapse
I'm not sure what I was doing, I was going to flash different ak kernel as my wifi didn't work.
HOWEVER
I read someone suggesting if you still have bootloop after trying the qualcomm recovery tool, try booting to fastboot and use: fastboot continue
my opt booted nicely to hydrogen os and after I shut it down it no longer bootlooped and I was able to get to recovery.
I'll post this to your reddit thread too, maybe it might help somebody one day, hopefully this works for you too
Makrilli said:
use: fastboot continue
Click to expand...
Click to collapse
Mate! that worked for me too!
However... It only seems to skip the bootloop for that power on. After power off, it returns to the boot loop. I also still can't unlock the bootloader and can't access recovery.
But at least it can boot into OS with fastboot continue!
Thank you.
Weird, after the first successful boot I rebooted and a chinese menu prompted me if I wanted to unlock the bootloader, and I did.
Maybe you should try different recovery packages.
But I'm glad to hear you at least got past the boot loop
Makrilli said:
Maybe you should try different recovery packages.
Click to expand...
Click to collapse
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
GusGold said:
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
Click to expand...
Click to collapse
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Makrilli said:
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Click to expand...
Click to collapse
Ahh, do you mind linking me to the one you used?
I think I used this: https://mega.nz/#!EsNQHKab!ifATzg4rxxBniPad0iyxANqlN8cZpUx2MVWaZgEhrD4
but it might have also been this: https://drive.google.com/file/d/0B14IjYN3PtxcSlJ5aGQxX3JERHM/view?usp=sharing
It's also worth mentioning I flashed both a few times before I tried the fastboot continue command so try both a few times and see if that helps, also I replaced the stock recovery with twrp in both recovery packages before flashing.
Edit: And best of luck, I'm rather confident your OPT is going to work properly again.
Boot Loop
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
p3wb said:
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
Click to expand...
Click to collapse
And I'm guessing you have tried the qualcomm recovery tool?
And I'm guessing you have tried the qualcomm recovery tool?[/QUOTE]
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
p3wb said:
And I'm guessing you have tried the qualcomm recovery tool?
Click to expand...
Click to collapse
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.[/QUOTE]
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT
Makrilli said:
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
Click to expand...
Click to collapse
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT[/QUOTE]
I finally got my OPT working again, tried Qualcomm recovery tool, wasn't able to complete the "MSM8994DownloadTool"
So i downloaded "A2001_14_A.03_150805" in a guide from technobuzz.net/unbrick-oneplus-2/
A similar but it does a entire wipe of the phone, nothing left at all. WARNING!
But i was okey with it.
Well the phone was in Chinese when it was all done but to change language was no problem.
I finally managed to solve it on mine. I had been cautious over the past weeks to not let it run out of battery or get turned off while away from my computer as
Code:
fastboot continue
was the only way I could get past the boot loop.
My core issue to solve was that I couldn't get it recognised as the USB Diagnostic 9006 under Ports in Device Manager. I installed the driver from here manually by right clicking the /qcser/x64/qcser.inf file and selecting install from the context menu. Then, I powered off my OP2. While only holding Vol+ (not power or Vol-), I plugged in my OP2 to the computer and it was finally recognised as the 9006. Then using the recovery tool from the prior link, it installed and rebooted my OP2. The moment of truth was when it rebooted and didn't enter a boot loop!
Then with the Chinese recovery prompt, I selected the top/first option and it brought me to the welcome/first setup screen of OOS.
It wiped the internal memory, and installed OSS 2.0.2 (don't know if coincidence or not as that was my prior OS as well). Now to install twrp and update to the latest OOS hopefully without a hitch.
Happy to finally know it wasn't a hardware issue like a failed eeprom or a dud nand controller as my prior phone (Samsung Note 10.1) died to a failed nand controller as well.
Will update with news of twrp and OOS, but I feel that should go smoothly now. Thanks to the others that helped in this thread too!
Yeap, all good!
Flashed official twrp through fastboot and batch installed OOS2 through 2.1.1 patches and SuperSU. Everything working like new!
Phew.
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
gamdiiii said:
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
Click to expand...
Click to collapse
Is it recognised as a USB Diagnostic 9006 in your device manager?
Hi GusGold No its 9008
I've successfully rooted my T-Mobile LG Leon, and I've successfully installed TWRP, but for the life of me, I can't get the phone to boot into recovery. I can RE-boot into recovery from TWRP manager, but I can't actually boot into it from a fully powered-down state. I've tried every combination of the power and volume buttons I can think of, and nothing ever works. Download Mode works, the factory restore menu works, but I CANNOT get into recovery. Is there a very specific set of instructions anywhere that I can follow?
EDIT: Okay, I finally figured it out: You need to actually select to do a factory reset, and it throws you into the recovery menu.
Yeah, it was because the stock recovery doesn't exist as a menu, when you're running stock and enter the adb command "adb reboot recovery" it will reboot to the "factory reset mode" and the actual file of this mode is stored on partition named "recovery". Choosing the factory reset option boots the custom recovery because it replaces the said " factory reset mode" and that's the trick.
You can access recovery from the powered off state by holding volume down and power on until you see the lg sign. Without letting go of volume down, depress on the power button before clicking it back in and holding both buttons in until you see twrp pop up.
If you reboot to recovery now, it''ll probally say secure booting error. Simply go to the Developer options and enable OEM Unlock and that'll make you boot to it
You boot in the download mode by holding the vol up 10 seconds and during this 10 seconds you insert the usb. The LG Leon brand screen will come on a minute then it will go into download mode. It says not to unplug until firmware is done updating. So I guess you should have your custom recovery or whatever before you do this. I have only got this far, and thusly it sits. All Dressd up with no where to go...haha
kruc Ire said:
You boot in the download mode by holding the vol up 10 seconds and during this 10 seconds you insert the usb. The LG Leon brand screen will come on a minute then it will go into download mode. It says not to unplug until firmware is done updating. So I guess you should have your custom recovery or whatever before you do this. I have only got this far, and thusly it sits. All Dressd up with no where to go...haha
Click to expand...
Click to collapse
can't find "enable OEM" at all in developer options. have phone hooked computer, and on, it's sending and receiving. No OEM. Isn't there.
See, I'm trying to root this without using KingUser. Since I found that it was pretty easy to do from the very beginning with Samsung, and I just don't see any way to do it here. I can't get ADB Devices command to see the phone.
kruc Ire said:
can't find "enable OEM" at all in developer options. have phone hooked computer, and on, it's sending and receiving. No OEM. Isn't there.
See, I'm trying to root this without using KingUser. Since I found that it was pretty easy to do from the very beginning with Samsung, and I just don't see any way to do it here. I can't get ADB Devices command to see the phone.
Click to expand...
Click to collapse
I think I have the same issue, but I rooted my phone using kingroot, I haven't tested the adb commands, I just want to use twrp but no luck, it says Secure booting error and I can't find OEM Unlock option in Developer Menu.
duffycop said:
I think I have the same issue, but I rooted my phone using kingroot, I haven't tested the adb commands, I just want to use twrp but no luck, it says Secure booting error and I can't find OEM Unlock option in Developer Menu.
Click to expand...
Click to collapse
I got a good way to get it rooted with SuperSU. Ran a command window script I found out there. It worked and now I have SuperSU root. I also figured out how to get into recovery. It looks as though my phone is not the standard LEON that people are talking about here. It's got a few designations, and the T Mobile site advertises a Leon that seems very similar and is called by the name most are using..
Anyhow my LG Leon is designated as a H320. It also carries a v10 desiganation, v10b. The v10 is variable from a-h or a-i. It would seem that once it is updated to 5.1.1 android it gets upped, and becomes unrootable. Mine being a v10b was rootable, but it took me a while to get used to it, and make the command window work.
Unfortunately for me one of many things I tried before getting it rooted, was ADB fastboot. And since this told me to wait for too long, I pulled the plug on it and pulled the battery to get back into "normal" operations. Perhaps I should have waited, because after finding out a few things about the phone, I discovered the true way to get it into recovery:
The real way into recovery for my phone, is to (from power off state) hold the volume up, a few seconds, then plug the USB cable which is going to the computer into the phone. While holding the volume up until it comes to recovery. This will activate the recovery, (Now for me it activates that fastboot command line...and does nothing else). This was the bit of information I could have used from the beginning, that no one knows. All these places tell you to hold the power and volume up, and then let off power when the screen changes, but that never worked even once. You just hold the volume, and plug the USB from computer. This works.
For me it goes into a "FASTBOOT" header at the bottom of the screen that never changes.
I believe it does this because of my unsuccessful attempt to fastboot it before. And it does not have the right driver to get recognized in the computer. So I'm screwed as far as the recovery goes now.
It is rooted though. And it doesn't seem to have any alternate ROMS available anyways. so we're dealing with the loss of the recovery.
When I do try to use an app such as TWRP manager or CWM (ROM) Manager to reboot into recovery, I get a "boot certification verification -1" error instead of the fastboot line at the bottom of the startup screen and it boots normally from there. So many people asked about this "boot certification verification -1" and NO answers are available anywhere online. So that's where it stands for this phone right now.
Anyone know what driver I should use to get the thing recognized in the computer? I have downloaded a zipped fastboot tools, and it won't get recognized inside the driver manager as "android" only as "unknown device" so I can't use that route....I'm thinking about doing a factory reset to try to erase the fastboot attempt. That may not help though. Anyone?
kruc Ire said:
I got a good way to get it rooted with SuperSU. Ran a command window script I found out there. It worked and now I have SuperSU root. I also figured out how to get into recovery. It looks as though my phone is not the standard LEON that people are talking about here. It's got a few designations, and the T Mobile site advertises a Leon that seems very similar and is called by the name most are using..
Anyhow my LG Leon is designated as a H320. It also carries a v10 desiganation, v10b. The v10 is variable from a-h or a-i. It would seem that once it is updated to 5.1.1 android it gets upped, and becomes unrootable. Mine being a v10b was rootable, but it took me a while to get used to it, and make the command window work.
Unfortunately for me one of many things I tried before getting it rooted, was ADB fastboot. And since this told me to wait for too long, I pulled the plug on it and pulled the battery to get back into "normal" operations. Perhaps I should have waited, because after finding out a few things about the phone, I discovered the true way to get it into recovery:
The real way into recovery for my phone, is to (from power off state) hold the volume up, a few seconds, then plug the USB cable which is going to the computer into the phone. While holding the volume up until it comes to recovery. This will activate the recovery, (Now for me it activates that fastboot command line...and does nothing else). This was the bit of information I could have used from the beginning, that no one knows. All these places tell you to hold the power and volume up, and then let off power when the screen changes, but that never worked even once. You just hold the volume, and plug the USB from computer. This works.
For me it goes into a "FASTBOOT" header at the bottom of the screen that never changes.
I believe it does this because of my unsuccessful attempt to fastboot it before. And it does not have the right driver to get recognized in the computer. So I'm screwed as far as the recovery goes now.
It is rooted though. And it doesn't seem to have any alternate ROMS available anyways. so we're dealing with the loss of the recovery.
When I do try to use an app such as TWRP manager or CWM (ROM) Manager to reboot into recovery, I get a "boot certification verification -1" error instead of the fastboot line at the bottom of the startup screen and it boots normally from there. So many people asked about this "boot certification verification -1" and NO answers are available anywhere online. So that's where it stands for this phone right now.
Anyone know what driver I should use to get the thing recognized in the computer? I have downloaded a zipped fastboot tools, and it won't get recognized inside the driver manager as "android" only as "unknown device" so I can't use that route....I'm thinking about doing a factory reset to try to erase the fastboot attempt. That may not help though. Anyone?
Click to expand...
Click to collapse
I dunno, I have the H340AR, with this phones happens the same that with the Samsung Galaxy Ace 3, there are, 3G versions, 4G versions, regional versions, etc.. GA3 have 7275R, 7275B, 7272L, 7272T, I dunno, maybe if we could get a device tree for a H340 and an H320 we could make some TWRP and CM compiling, but I just can't figure it out how to make a device tree or even where to begin..
I successfully rooted my H340AR with Kingroot, it works like a charm. I haven't tried fastboot and I tried to install TWRP in this link https://dl.twrp.me/c50/ but I get that F error "Secure booting error". I guess I have my bootloader locked, so I'm trying to figure out how to unlock my bootloader.
I'm trying to contact with some developers and see if anyone can help me build a device tree.
]
Hi, I have that same phone H340AR LTE. I rooted it with Kingroot and also tried to use TWRP to gen into recovery and got that Security error. I only pulled out the baterry and turn it on again so it booted normally. I made a factory reset because I read that it could be a problem of OTA firmware update. Then I installed TWRP and BusyBox again and tried to get into recovery from TWRP option. When I did that, it showed up the Android lying in his back with a red triangle. I pulled a out the battery again and yes, it seems very dumb and simple but it worked and could reboot the phone.
However, I can't get into recovery from TWRP yet. I read that the problem with us not being able to unlock the bootloader(we don't have the OEM option) is because Leon has Lollipop 5.0.1 and OEM is for 5.1.1
pedrovay2003 said:
I've successfully rooted my T-Mobile LG Leon, and I've successfully installed TWRP, but for the life of me, I can't get the phone to boot into recovery. I can RE-boot into recovery from TWRP manager, but I can't actually boot into it from a fully powered-down state. I've tried every combination of the power and volume buttons I can think of, and nothing ever works. Download Mode works, the factory restore menu works, but I CANNOT get into recovery. Is there a very specific set of instructions anywhere that I can follow?
EDIT: Okay, I finally figured it out: You need to actually select to do a factory reset, and it throws you into the recovery menu.
Click to expand...
Click to collapse
when i pressed factory reset all it did was to a factory reset even though i flashed twrp.img successfully... help?
lg leon h345 lollipop 5.1.1
This device has a locked bootloader. If you flash a custom recovery on it, it will not boot into recovery, but will report a security issue. You will lose all recovery functionality, including factory reset, adb, fastboot. If your phone fails to boot, you have a brick.
Hi
Yesterday I got my axon 7 and it worked perfect.
Now I was wanted to change the language
So I downloaded as file that in my language
And I tried to install him .
And it worked by the adb software when the axon connected to the computer
So I went to the application in my phone and changed it to my language after USB debugging and developer option is worked
Then the phone was changed to my language and crashed
Now the axon just show the start logo and stuck in restart loop. so I tried to do few thing through your forum , but nothing helped ..
I also cleared the cache through recovery mode but it also didn't help
Its like the axon can't upload the operating system
Thanks a lot for who will help me here.
Also if it possible to send money through PayPal
And if it's legal I will send 30$ to the first that will help me solve this problem
Can you share the link to the file you downloaded ?
Is it compatible with the version of your phone ?
If you can enter in recovery it's enough to save it.
billy_boolean said:
Can you share the link to the file you downloaded ?
Is it compatible with the version of your phone ?
If you can enter in recovery it's enough to save it.
Click to expand...
Click to collapse
Yea the reason it happened is because I installed wrong adb language on my axon through USB debugging and external app
Now it possible to get into recovery
I just don't know what to do next
I tried few things but I always keep getting errors
You can try to install TWRP.
You will have a lot of option.
There is no option to restor the phone in the official recovery ?
billy_boolean said:
You can try to install TWRP.
You will have a lot of option.
There is no option to restor the phone in the official recovery ?
Click to expand...
Click to collapse
I tried to use twrp but the computer doesn't recognize My axon
You need to install driver first...
billy_boolean said:
You need to install driver first...
Click to expand...
Click to collapse
I tried but after the install the drivers and cheak them in the device manager in my computer
The name of the driver was London marshesll something
And not what I saw in the guide - adb something
And it didn't recognize my device
I wrote also adb reboot bootloader
And it gives me error massage
I would be more then happy to give someone 30$ now..
Just that my axon will work
Did you root your phone, or just use ADB to sideload a file? If it's wasn't rooted/unlocked, then a factory reset should take care of it, as nothing done via ADB in that setup would impact the system partitions.
If you used the unofficial bootloader unlocking, then you'll have to follow other people's restore guides.
As @TeutonJon78 mention, a factory reset will do the job youan boot to stock recovery using adb
Code:
adb reboot recovery
Or doing it manually,
- Completely Power off your device
- Press and HOLD Volume UP and Power button.
- once you boot to recovery just use your volume buttons to navigate FACTORY RESET.
- Reboot System
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
liron lev said:
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
Click to expand...
Click to collapse
I will be honest man. I bricked mine too. Everybody has a step by step guide that they say works. I followed them step by step. They did not work. I have an RMA open on my phone and fedex is taking it to ZTE. Use the warranty. Until Zte puts online the full factory images for us to use there is no real way to fix these things.
liron lev said:
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
Click to expand...
Click to collapse
Are you from Israel?
---------- Post added at 11:40 PM ---------- Previous post was at 11:38 PM ----------
I know how to help you if you can tell me which bootloader version you have? Did you unlocked it? did you use Tenfar's method to root it?
tabletalker7 said:
I will be honest man. I bricked mine too. Everybody has a step by step guide that they say works. I followed them step by step. They did not work. I have an RMA open on my phone and fedex is taking it to ZTE. Use the warranty. Until Zte puts online the full factory images for us to use there is no real way to fix these things.
Click to expand...
Click to collapse
Were you playing around with the rooting/unofficial bootloader? It should be very hard to actually brick the device without doing those things, and nothing a factory reset shouldn't fix.
If one's playing around with unofficial modifications, then they should take all precautions to make sure to know how to recover the device before hand. There's still a lot of moving pieces between potentially faulty TWRP bugs and no image file.
liron lev said:
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
Click to expand...
Click to collapse
Did you let it sit for awhile? First runs after a factory reset can take up to even 10 minutes to boot fully. If it still doesn't work again, check if the recovery menu has another option like wipe cache/davlik, which maybe also needs to run if they have a bug in the recovery code about resetting data. If you hadn't touch anything using the tools on this forum, and none of the factory reset/wipe data/wipe cache stuff helps, then you probably have a faulty phone. Just sideloading an app shouldn't be able to corrupt a locked system partition.
The OP of this thread hasn't yet clarified if he was just sideloading files on a normal system (which should be totally fixable unless his phone has an actual flash problem) or if he had been tinkering with other things first.
TeutonJon78 said:
Were you playing around with the rooting/unofficial bootloader? It should be very hard to actually brick the device without doing those things, and nothing a factory reset shouldn't fix.
If one's playing around with unofficial modifications, then they should take all precautions to make sure to know how to recover the device before hand. There's still a lot of moving pieces between potentially faulty TWRP bugs and no image file.
Did you let it sit for awhile? First runs after a factory reset can take up to even 10 minutes to boot fully. If it still doesn't work again, check if the recovery menu has another option like wipe cache/davlik, which maybe also needs to run if they have a bug in the recovery code about resetting data. If you hadn't touch anything using the tools on this forum, and none of the factory reset/wipe data/wipe cache stuff helps, then you probably have a faulty phone. Just sideloading an app shouldn't be able to corrupt a locked system partition.
The OP of this thread hasn't yet clarified if he was just sideloading files on a normal system (which should be totally fixable unless his phone has an actual flash problem) or if he had been tinkering with other things first.
Click to expand...
Click to collapse
The factory reset made my phone lose it's IMEI. Everyone said follow this certain guide. After following that guide and getting more help after that I had an AXON 7 that wouldn't turn on at all. Without full factory images from ZTE I won't touch the software. ZTE can fix it.
tabletalker7 said:
The factory reset made my phone lose it's IMEI. Everyone said follow this certain guide. After following that guide and getting more help after that I had an AXON 7 that wouldn't turn on at all. Without full factory images from ZTE I won't touch the software. ZTE can fix it.
Click to expand...
Click to collapse
Which guide did you follow? A Factory reset form within the stock software or stock recovery shouldn't cause that problem at all, as it should only be wiping data, cache, Davlik, and potentially the "media" portion of the internal storage.
TeutonJon78 said:
Which guide did you follow? A Factory reset form within the stock software or stock recovery shouldn't cause that problem at all, as it should only be wiping data, cache, Davlik, and potentially the "media" portion of the internal storage.
Click to expand...
Click to collapse
The factory reset that made it lose the IMEI - it was completely stock then!
liron lev said:
Hi
Yesterday I got my axon 7 and it worked perfect.
Now I was wanted to change the language
So I downloaded as file that in my language
And I tried to install him .
And it worked by the adb software when the axon connected to the computer
So I went to the application in my phone and changed it to my language after USB debugging and developer option is worked
Then the phone was changed to my language and crashed
Now the axon just show the start logo and stuck in restart loop. so I tried to do few thing through your forum , but nothing helped ..
I also cleared the cache through recovery mode but it also didn't help
Its like the axon can't upload the operating system
Thanks a lot for who will help me here.
Also if it possible to send money through PayPal
And if it's legal I will send 30$ to the first that will help me solve this problem
Click to expand...
Click to collapse
I could help you, please pm.
i tried to use the appliction "morelocale2" to chnge my phone language.
i did turn on the usb debugging option through Developer Options.
it all went good until i tried to choose my language from the app (morelocale2) it change to my language got stucked and start looping over and over. (start up and shut dowm).
after that i cleand evrything such as: wipe data/factory and cache data, and then i restart the phone. it is stoped looping but got stucked on logo zte. and after i cleaned the data i waited few houres.
i also think i used an old version of "morelocale2".
and yes im from israel...
liron lev said:
i tried to use the appliction "morelocale2" to chnge my phone language.
i did turn on the usb debugging option through Developer Options.
it all went good until i tried to choose my language from the app (morelocale2) it change to my language got stucked and start looping over and over. (start up and shut dowm).
after that i cleand evrything such as: wipe data/factory and cache data, and then i restart the phone. it is stoped looping but got stucked on logo zte. and after i cleaned the data i waited few houres.
i also think i used an old version of "morelocale2".
and yes im from israel...
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.wanam
download this app
install it
search hebrew in hebrew
choose hebrew (iw)
accept the root prompt
reboot your phone
everything will be fine
If you have bootloop issues these are not related to the app!
if you need help with this contact me!
you have my info in pm.
Hi All.
I hope someone can help me. I encountered this stupid problem:
I have a L31 device and successfully installed the Nougat (test?)update through Firmware Finder. But since this wasn't the definitive update, I decided to rollback to MM. I installed the C900B300 rollback package and then the B160 package. That went well, BUT the device now refused to activate the Google services. I couldn't enter a Google account. Not from Settings > Accounts and not from any other Google app like Chrome, Play Store, Gmail or others. The screen just kept returning to the Homescreen.
Upon checking About this device, I noticed the version now was C900B160, instead of the expected C432B160. I am very positive I used the C432B160 MM package to flash. This I did with the three button method. But then how come it still showed C900B160?
So I first tried to reflash the C432B160 with the three button method. Flashing worked well, but the problem wasn't solved. Still no Google activation and still the same C900B160 number.
So then I decided to reflash the rollback package...
That turned out to be a mistake... After flashing that (and it did show 100% successfull after flashing) the device is bricked. The Huawei logo shows and then nothing happens. The logo stays in the screen. I can't even turn the device off. Short pressing the ON-OFF button does nothing and long pressing just restarts the logo and nothing more.
I tried to reflash the MM update C432B160 with the three button technique, but that doesn't work anymore!! Entering erecovery with the volume up and ON-OFF also doesn't work anymore!! The only thing that works is Fastboot when connected to a pc. That screen shows phone (and bootloader) is locked, by the way. So I can't flash boot.img and recovery.img .
Has anybody encountered such problems and knows what to do now?? Thanks guys!
Liebaart said:
Hi All.
I hope someone can help me. I encountered this stupid problem:
I have a L31 device and successfully installed the Nougat (test?)update through Firmware Finder. But since this wasn't the definitive update, I decided to rollback to MM. I installed the C900B300 rollback package and then the B160 package. That went well, BUT the device now refused to activate the Google services. I couldn't enter a Google account. Not from Settings > Accounts and not from any other Google app like Chrome, Play Store, Gmail or others. The screen just kept returning to the Homescreen.
Upon checking About this device, I noticed the version now was C900B160, instead of the expected C432B160. I am very positive I used the C432B160 MM package to flash. This I did with the three button method. But then how come it still showed C900B160?
So I first tried to reflash the C432B160 with the three button method. Flashing worked well, but the problem wasn't solved. Still no Google activation and still the same C900B160 number.
So then I decided to reflash the rollback package...
That turned out to be a mistake... After flashing that (and it did show 100% successfull after flashing) the device is bricked. The Huawei logo shows and then nothing happens. The logo stays in the screen. I can't even turn the device off. Short pressing the ON-OFF button does nothing and long pressing just restarts the logo and nothing more.
I tried to reflash the MM update C432B160 with the three button technique, but that doesn't work anymore!! Entering erecovery with the volume up and ON-OFF also doesn't work anymore!! The only thing that works is Fastboot when connected to a pc. That screen shows phone (and bootloader) is locked, by the way. So I can't flash boot.img and recovery.img .
Has anybody encountered such problems and knows what to do now?? Thanks guys!
Click to expand...
Click to collapse
With fastboot method, unlock bootloader again. Flash recovery. Boot into recovery. Wipe system and boot. Flash stock boot IMG and recovery IMG. Power off. Use dload. Now you are in bootloop. When booting press vol up 3 seconds, on e-recovery press shutdown. Press and hold power and vol up. Go to stock recovery, do factory reset.
Sent from my NEM-L21 using Tapatalk
Thanks for your help.
Trouble is that I can't unlock te bootloader, because I do not know my Product ID and I can't look it up, since I don't have a dialer... The HuaweiProductIDGenerator doesn't help. I tried several codes with it, but none worked.
Liebaart said:
Thanks for your help.
Trouble is that I can't unlock te bootloader, because I do not know my Product ID and I can't look it up, since I don't have a dialer... The HuaweiProductIDGenerator doesn't help. I tried several codes with it, but none worked.
Click to expand...
Click to collapse
Power off, vol up+ power can you go to recovery?
Sent from my NEM-L21 using Tapatalk
Liebaart said:
Thanks for your help.
Trouble is that I can't unlock te bootloader, because I do not know my Product ID and I can't look it up, since I don't have a dialer... The HuaweiProductIDGenerator doesn't help. I tried several codes with it, but none worked.
Click to expand...
Click to collapse
Post here IMEI+SN and i try to get you bootloader unlock code.
Thanks! I sent you a PM.
Anonda said:
Power off, vol up+ power can you go to recovery?
Click to expand...
Click to collapse
No, I can only get into fastboot when connected to a pc.
OK. gtdaniel was so kind to provide me with an unlock code. THANKS!
But, I don't seem te be able to use it...
I can put the phone in bootloader when connected to a pc. When I type "fastboot devices" I do get the correct serial number. But when I type "fastboot oem unlock 343...338" I get a FAILED (remote: command not allowed).
It seems this is because I never could allow OEM unlocking from the Android settings menu. But since my phone is bricked, I can not enter into that menu!
Does anybody know how to solve this??
Liebaart said:
OK. gtdaniel was so kind to provide me with an unlock code. THANKS!
But, I don't seem te be able to use it...
I can put the phone in bootloader when connected to a pc. When I type "fastboot devices" I do get the correct serial number. But when I type "fastboot oem unlock 343...338" I get a FAILED (remote: command not allowed).
It seems this is because I never could allow OEM unlocking from the Android settings menu. But since my phone is bricked, I can not enter into that menu!
Does anybody know how to solve this??
Click to expand...
Click to collapse
u can try with
VNS-L21-L22-L31 Toolkit or
SRKToolHuawei-Lod-Chong-V2.0-20161002
But i dont know is that good idea to listen to me anymore
Thanks, but the Toolkit says it can't find the device.
Liebaart said:
Thanks, but the Toolkit says it can't find the device.
Click to expand...
Click to collapse
at command line when u write adb devices u got your phone ?
Maybe is dump question but did you install adb android driver ?
I'm pretty sure that someone wrote in thread that you don't need to have this oem permission in android if you are in fastboot
dragon218 said:
at command line when u write adb devices u got your phone ?
Maybe is dump question but did you install adb android driver ?
I'm pretty sure that someone wrote in thread that you don't need to have this oem permission in android if you are in fastboot
Click to expand...
Click to collapse
OEM permission need for fastboot/unlock bootloader.
Sent from my NEM-L21 using Tapatalk
Anonda said:
OEM permission need for fastboot/unlock bootloader.
Click to expand...
Click to collapse
Yes, that's what I read too. Since I can't change that permission anymore while I can't start Android, I can't unlock. Dammit.
Is DC Unlocker my only option then? It seems their software can do it.
I'm afraid I've got some pretty bad news. Last week the same thing happened to me after I was THAT stupid to actually try and flash the rollback package for the second time. My phone got bricked just like yours, and NOTHING worked to fix it. I tried completely everything I could find on the net and XDA, and in the very end I was forced to bring it in for warranty repairs. Even they COULD NOT fix it and the phone ended up with the entire logicboard changed with a completely new one. I was lucky that it all was done under warranty. Will never do anything as stupid as that!
Really hope you find a fix somehow, but if not, the repair service is your only solution, because otherwise the phone is as good as dead.
markositoo said:
I'm afraid I've got some pretty bad news. Last week the same thing happened to me after I was THAT stupid to actually try and flash the rollback package for the second time. My phone got bricked just like yours, and NOTHING worked to fix it. I tried completely everything I could find on the net and XDA, and in the very end I was forced to bring it in for warranty repairs. Even they COULD NOT fix it and the phone ended up with the entire logicboard changed with a completely new one. I was lucky that it all was done under warranty. Will never do anything as stupid as that!
Really hope you find a fix somehow, but if not, the repair service is your only solution, because otherwise the phone is as good as dead.
Click to expand...
Click to collapse
my phone is also reedy to send to service. I have a lot of phone with android but no rom make so many damage to my phone, like this fc** rollback. finger cross, because huawei service in my country without warranty,takes for new motherboard 175 $ . I bought phone for 233 $ with 3 gb ram..... This will be harsh and pay(in)ful lesson for me.
dragon218 said:
my phone is also reedy to send to service. I have a lot of phone with android but no rom make so many damage to my phone, like this fc** rollback. finger cross, because huawei service in my country without warranty,takes for new motherboard 175 $ . I bought phone for 233 $ with 3 gb ram..... This will be harsh and pay(in)ful lesson for me.
Click to expand...
Click to collapse
Uhh, I am sorry to hear that. But yes, I had the same harsh lesson. They will be forced to changed the motherboard too, cause even they won't be able to re-flash the whole system. Though, what I did to have the warranty not declined, is I brought the phone to the service and said that - "The phone received and OTA update through the updater, I didn't look much into it and just went with it, pressed on update and everything seemed well. It worked until the moment where it installed and restarted, and now the phone is stuck on Huawei logo and you can't possibly do anything with it, not even turn it off." - and that's it. They will have to repair it under warranty because there is no proof left that you had rooted it or done any other installations not authorized by Huawei.
Best of luck!
Liebaart said:
Yes, that's what I read too. Since I can't change that permission anymore while I can't start Android, I can't unlock. Dammit.
Is DC Unlocker my only option then? It seems their software can do it.
Click to expand...
Click to collapse
I know that i read somewhere how to manage to this oem lock. I was 50 % right.
https://forum.dc-unlocker.com/forum...61751-huawei-mate-9-mha-l29-erase-frp-problem
Some user got the same problem that you have and flash boot.
But truly if u don't have "your device has been unlock" only bootloop on huawei logo, is more simple to send it back to warranty and play dump.
I have now "your device is unlock" and i pray for miracle.
Liebaart said:
Hi All.
I hope someone can help me. I encountered this stupid problem:
I have a L31 device and successfully installed the Nougat (test?)update through Firmware Finder. But since this wasn't the definitive update, I decided to rollback to MM. I installed the C900B300 rollback package and then the B160 package. That went well, BUT the device now refused to activate the Google services. I couldn't enter a Google account. Not from Settings > Accounts and not from any other Google app like Chrome, Play Store, Gmail or others. The screen just kept returning to the Homescreen.
Upon checking About this device, I noticed the version now was C900B160, instead of the expected C432B160. I am very positive I used the C432B160 MM package to flash. This I did with the three button method. But then how come it still showed C900B160?
So I first tried to reflash the C432B160 with the three button method. Flashing worked well, but the problem wasn't solved. Still no Google activation and still the same C900B160 number.
So then I decided to reflash the rollback package...
That turned out to be a mistake... After flashing that (and it did show 100% successfull after flashing) the device is bricked. The Huawei logo shows and then nothing happens. The logo stays in the screen. I can't even turn the device off. Short pressing the ON-OFF button does nothing and long pressing just restarts the logo and nothing more.
I tried to reflash the MM update C432B160 with the three button technique, but that doesn't work anymore!! Entering erecovery with the volume up and ON-OFF also doesn't work anymore!! The only thing that works is Fastboot when connected to a pc. That screen shows phone (and bootloader) is locked, by the way. So I can't flash boot.img and recovery.img .
Has anybody encountered such problems and knows what to do now?? Thanks guys!
Click to expand...
Click to collapse
I am exactly in the same situation with the difference that I don't have Fasboot! How do you get to Fastboot? Mine hangs on the screen that says the phone is unlocked and the device is booting... Vol+/Vol- and Power doesn't boot into Fastboot and my minimal ADB doesn't recognize the phone in the stages that it hangs...
---------- Post added 16th April 2017 at 12:04 AM ---------- Previous post was 15th April 2017 at 11:52 PM ----------
I have the same situation. I tried everything, Three button method, letting the battery run out completely, Vol+ and Power, Vol- and Power, connected to PC, not connected to PC. Every time I disconnect the charger, and reconnect it starts from 0. I read some other people here have the same problem. Send it to warranty and explain your rollback process unlocked the bootloader somehow (I mean the phone does do a lot of sh*ty sh*t, so this shouldn't seem very odd as well!!!) and hope that you get a repair/replacement and after that sell it on ebay hoping some stupid people like us in the first place will buy it and spend your money on a phone more reliable!
I managed to access the fastboot using the 3 button method in cold boot. Hold the Power key until the screen goes off and then release and hold down the Vol- key and immideately connect the usb cable to PC right before it vibrates or exactly when it vibrates (it's a matter of timing), and bingo you are in fastboot and you can flash system.img, recovery.img, cust.img, cache.img and boot.img from there, but this is not how I revived my phone. I used the 3 button method again when the phone was charged for like half an hour or so and the did the same cold boot trick and I could boot into the force upgrade environment (strangely this still didn't work whitout connecting the usb cable to PC), but it somehow didn't want to read the UPDATE.APP that I had in dload folder on my SD card and wanted to have it from my PC (I just felt it nad there was no indication of it ) so then I installed the DC Phoenix tool and payed 15 euros to be able to inject the complete UPDATE.APP to my bricked phone and the installation went well to 99% and failed, but I rebooted the phone and I could boot normally. Just to make sure I did a factory reset afterwards. Hope this helps.
Cannot get into Bootloader
Hey there!
Essentially as stupid as I am i flashed the Rollback Image at Android 6.0 too, because i wanted to get rid of C900. So now my phone is stuck in the Startup screen too. As mentioned here, I wanted to unlock bootloader again; The Button combination does not work, and if I want to start in bootloader via ADB, it just says "waiting for device"
i am really desperate and i don't know what i should do now
Thanks for the help
EDIT: Somehow managed to got it into Bootloader. At the moment i am unlocking it. Where do i get TWRP and the needed things? Please help, i'm just some noob who doesn't know how it's done
EDIT2: Solved, got Stock Recovery Re-installed, Flashed with the Force Update Method the Main Package of the Rollback (so not the temp rollback data), and worked. But Still C900 and no Google sign-in possible. Someone know how to solve?
HI, I will get right to the point. My phone is Honor 7x (BND-AL10C675 INDIAN) I screwed it up.
Now, the fastboot or recovery or E recovery nothing works!!
There is only one screen which keeps coming in a loop rebooting with a vibration
It says " ERROR MODE"
ATTENTION!
PLEASE UPDATE SYSTEM AGAIN
ERROR! FUNC NO : 8 (HIFI IMAGE)
ERROR NO : 1 (SECURITY VERIFY FAILED)
It keeps rebooting and the phone doesn't even turn off. I tried the download mode (Volume UP & Down Power button, SAME SCREEN comes up)
Let me know if you want me to write a detailed version of how I got here or ask any specific questions.
Now, all I need is at least FASTBOOT so I can do something about it. Is there anyone who can help? I hope SOME PRO OR A GEEK is able to solve this issue magically. I just can't tell you what I'm going through.
UPDATE:
As Christo31 requested and maybe it's useful for other people to help me out. Here is what I did. It's a real long story!!
I have Honor 7x (BND-AL10C675 INDIAN) I had unlocked bootloader and twrp and I was on emui 8 beta which I flashed manually using one of the tutorials here on the forum. One day, I decided to get back to stock as I was stuck in emui 8 beta and no OTA updates so I downloaded the emui 8 stable rom from firmware finder and put it in sd card "dload" folder. Now, for this method to work, we need to relock bootloader and flash stock recovery which I did and it completely wiped everything out.
Now, the "dload" method fails at 5% every time. I tried different roms for this very model but no it doesn't work. (Also, my build no. was stuck at B141 for a long time no matter what rom I changed : Yes, this is stupid, I should have fixed it first) Maybe that's why the "dload" method doesn't work.
So, in this forum I saw some with similar issue but somewhat different " Frp locked & bootloader unlocked" and I was told that the DC phoenix software might fix this and I bought some credits and used the software. Here's what I discovered
My observations with the software:
* I put the phone in fastboot and downloaded the update.app full Ota (same one emui stable) and tried to flash. The software flash well ok as it says "the software is written" but the phone doesn't boot and goes directly into the recovery mode and again the bootloader and frp are locked.
*Here, I noticed that it shows something like "opening backdoor" and then the Bootloader status goes to red and says "UNLOCKED" it means it was definitely doing something so the next I repeated the same process but as soon as the phone was "UNLOCKED", I pulled the usb cable out and I kept my command ready and tried "fastboot flash recovery_ramdisk recovery.img" and guess what it flashed that twrp file and I could see in the command line that it went "okay" so I immediately booted to recovery but again the stock recovery comes up. Also, I tried system.img also it flashes fine but phone doesn't boot. Same recovery.
REMEMBER: THE ABOVE STEPS MAY WORK FOR PEOPLE WHO HAVE UNLOCKED BOOTLOADER BUT FRP LOCKED. IN MY CASE BOTH ARE LOCKED SO THAT'S THE DIFFERENCE.
* I tried another update.app I guess it's BNDL22.ZIP or something and this time the software was trying to flash in "upgrade mode" and somehow the recovery was broke. There was some "ERROR MODE" basically the recovery was broke. I didn't care much. Although flashing another update.app would have fixed it.
* The next step I tried after a lot of trial & error for about 1.5 days. This time I did the same when the bootloader was unlocked, I pulled the cable and tried the command "fastboot oem unlock unlock code" ( I should have got this idea before, I mean it's a mess guys, I didn't sleep for too long) and I was shocked to see that it showed the options "Unlocked bootloader yes or no" and I clicked "yes" and I jumped hoping that it's over but... I ended up with 'ERROR MODE' which I described above.
* I feel, because the recovery was broken, it ended up in error mode. Just imagine if my recovery was fine and then I tried this command then it would have erased everything and maybe I might have been presented with fastboot screen with both "frp & bootloader Unlcock" or at least 'bootloader unlock" in either way, I could have flashed a 'system.img' and get into settings and BEATH THE HELL OUT OF THAT "ENABLE OEM UNLOCK' in settings. The rest you know.
I wrote this not just because someone might help me but because a lot of posts on this forum really helped me a lot and posts like these can help a lot of people down the road.
Now, my phone is still in the same loop. Reboot, Honor logo, Error mode...REPEAT
I heard that once the phone drains down completely, we may get back fastboot. Fingers crossed. Sadly, I have Mac so I borrowed windows laptop for this purpose from a friend. This is the last day and I guess I'm going to put it on sale and sell it as a scrap or something for display and stuff.
How much does motherboard cost? anyone any ideas? if it's below 4K or about 80$ then I might go for the repair if nothing works!!
I'm going to update on this very soon. Le'ts hope for a miracle. Either way my HONOR 7X IS A LEGEND.
UPDATE :
After waiting for hours, my phone got discharged and I curiously plugged in the phone pressing "volume down" button OR power + volume and all other types of combinations but the phone just goes to the same "ERROR MODE' and keeps going in the same loop.
So, I really hate Huawei for not providing stock firmware or some type of recovery for people like me to get back to stock. For example : Xiaomi has that fastboot ROMS which you can easily flash in EDL mode no matter what happens to you and of course some other ways to recovery the bricked phones.
The Huawei E recovery?? What the **** is it? Does it ever work? It's some kind of a joke. The hisuite is again **** It says 'My model is not supported" and it only showed me two very older and ancient models that are supported for recovery.
I'm not expecting warranty but at least they should give the service for the customer. Did I tell you that this phone was in Service centre for three days when it had FASTBOOT, RECOVERY, E RECOVERY working. They could n't fix it in 3 days so I rushed them to get my phone back hoping that I would recover it with the above method.
Now, I got the Redmi Note 5 Pro and my 7X is a dead brick and I'll try selling it as scrap for display etc...
Finally, I really love the XDA forums and the friendly members who are very helping and so empathetic. Thanks guys, you are the best
I'm not leaving. I'll see you on the other side. I mean, the Redmi Note 5 pro development. Keep hustling
You need to tell us what you did exactly first for any help
Thetpcguy said:
ERROR! FUNC NO : 8 (HIFI IMAGE)
ERROR NO : 1 (SECURITY VERIFY FAILED)
Click to expand...
Click to collapse
when you are in this situation
- Keep press "volume down" + "power button" for about 10 seconds, the phone will reboot
- When the phone reboot, release the "power button" but keep "volume down" and in the same time plug the micro usb cable ( you have to be ready and quick )
the phone will boot in FASTBOOT&RESCUE MODE ( hope you have unlocked bootloader and frp unlocked )
azerty11 said:
when you are in this situation
- Keep press "volume down" + "power button" for about 10 seconds, the phone will reboot
- When the phone reboot, release the "power button" but keep "volume down" and in the same time plug the micro usb cable ( you have to be ready and quick )
the phone will boot in FASTBOOT&RESCUE MODE ( hope you have unlocked bootloader and frp unlocked )
Click to expand...
Click to collapse
Hi, thanks for your help but the phone doesn't turn off. it just keeps rebooting and there is honor logo and then error mode and then phone reboots and the same cycle. I tried what you said also with other possible things but I guess I need to let the battery drain out completely as some people said it worked for them. It's almost 9 hours and it's still not drained (it was on full charge) anyway Fingers Crossed!!
christo31 said:
You need to tell us what you did exactly first for any help
Click to expand...
Click to collapse
HI, I Updated the post in full details. I hope my phone is rescued.
Let the battery drain, and then try to get into fastboot using key combinations. Let me know if you can do this, from there on you can proceed normally.
vaasu_g_wills said:
Let the battery drain, and then try to get into fastboot using key combinations. Let me know if you can do this, from there on you can proceed normally.
Click to expand...
Click to collapse
It didn't work out. It only boots in error mode and keeps going in a loop.
Thetpcguy said:
It didn't work out. It only boots in error mode and keeps going in a loop.
Click to expand...
Click to collapse
Did you try huawie suite system recovery??
vaasu_g_wills said:
Did you try huawie suite system recovery??
Click to expand...
Click to collapse
I never heard of it I'm googling it now and please throw some light on this but strangely your message got my hopes up.
UPDATE: Oh, I guess you are talking about Huawei Hisuite. I did try that and it didn't work and I included that in my post above as well. I still have my phone with me completely discharged.
Thetpcguy said:
I never heard of it I'm googling it now and please throw some light on this but strangely your message got my hopes up.
UPDATE: Oh, I guess you are talking about Huawei Hisuite. I did try that and it didn't work and I included that in my post above as well. I still have my phone with me completely discharged.
Click to expand...
Click to collapse
and with phone , off, totaly discharged, holding volume down, and plugging in the usb cable , just gives you same error mode?
---------- Post added at 10:59 PM ---------- Previous post was at 10:27 PM ----------
[/COLOR]Follow this steps.
1. Just flash with Dc phoenix
3 extract two update. App with huwai firmware extractor.
4. Check the log of dc phoix. Check which files are not flashed. By comparing with extracted files You will observe some files are not flashed. (some files are not in log of dc phoinix) Like Vendor.img product.img cust.img etc.. Note down which imgs are not flashed..
5. Now use multitool and go to unbrick option. There will be option of flashing around 5 img. Flash the 5 imgs. You will get this 5 img from extracting Update.app
6.then your phone will be working but not perfectly. Flash TWRP with fastboot.
7. Aftee flashing TWRP flash all other imgs which were not flashed by dc phoenix.
Then boot. Your phone must be good.
And again if you want then re flash with HWOTA tool. Your phone will be running now.
mrmazak said:
and with phone , off, totaly discharged, holding volume down, and plugging in the usb cable , just gives you same error mode?
Click to expand...
Click to collapse
Yes, even after that it give the error mode and goes on the same loop. Honor log, Error Mode, Reboot...REPEATED LOOP
I Already gave up on this phone but only a miracle can save this phone now.
Thetpcguy said:
Yes, even after that it give the error mode and goes on the same loop. Honor log, Error Mode, Reboot...REPEATED LOOP
I Already gave up on this phone but only a miracle can save this phone now.
Click to expand...
Click to collapse
i more question for you. Please . Does the three button combo from power off attempt to show update screen. I know for everyone the dload method is failing at 5%, but still need to know if yours is attempting this or not even try.
There might be dload method that works, according to posts on 4pda.ru
mrmazak said:
i more question for you. Please . Does the three button combo from power off attempt to show update screen. I know for everyone the dload method is failing at 5%, but still need to know if yours is attempting this or not even try.
There might be dload method that works, according to posts on 4pda.ru
Click to expand...
Click to collapse
I tried that also. Power+Volume UP+Volume Down to get into download mode but it just goes into that "ERROR MODE'
Normally, it should but maybe because I broke my stock recovery also and then tried to unlock the bootloader when the frp was locked with the DC phoenix trick (Pulling out the plug) that it's really screwed up beyond all this. Let me know if you want me to post pics or maybe if the clips canoe uploaded here, I will make short clip with what's happening. I guess I need some factory or manufacturer level stuff or I need to replace the motherboard. BTW the local guy told me it costs 8K INR which is around 125-130 USD which I'm not willing to spend. I got Redmi Note 5 Pro and I'll probably never ever buy Huawei phones ever.
ANYONE HERE WHO CAN DONATE THE MOTHERBOARD, PLEASE PM ME:laugh: