Related
Someone might be able to show me in the right direction.
Been trying to load several android roms on my hd2. Everyone has been a SD version, But for some reason the installation stops at the initial black screen with "micro size" text. Am I doing something wrong not getting past that screen?
Please help. Been trying fo 6 hours now, about to give up.
Tx for help guys,
/Wiklander
What do the last few lines of 'micro size text' say? If it's truly failing to boot, there's usually a clue in there as to why.
What build are you currently trying to boot up?
The first boot up can take quite awhile, sometimes 5-10 minutes. Let it go for a good while, and if it still won't boot, report back with what build it is, and the last 5 lines or so of the white micro size text. Good luck
Sent from my HTC HD2 using XDA App
I think the last line in the boot screen was jumping to kernel or something like that. Dont know if that helps..
After it says that, does the screen change to black with a green HTC logo, or stay with the white text? The older initrd.gz's showed all the text, while the newer ones cover it with the HTC screen. Was there like 100 lines of code or just a few?
It sounds like it's failing to load the kernel.
Sent from my HTC HD2 using XDA App
Wiklander said:
Someone might be able to show me in the right direction.
Been trying to load several android roms on my hd2. Everyone has been a SD version, But for some reason the installation stops at the initial black screen with "micro size" text. Am I doing something wrong not getting past that screen?
Please help. Been trying fo 6 hours now, about to give up.
Tx for help guys,
/Wiklander
Click to expand...
Click to collapse
Yeah, I sometime also experienced as you did
You can try to reformated your SD card and dont put any files except the Android rom files. And when your copy the Android files from PC, use Card Reader. Also try to combine with other winmo roms, because sometime it just works when you use other winmo roms. Also try redownload and do MD5 checksum to ensure the downloaded file is correct and not corrupted
If it still fails, you can try use with a brand new sd card.
Good luck
Goodluck
first make sure your SD card is error free, it means you have to check it using any aoftware, windows explorer will do, just right-click the card on My computer, go to properties-tools and check it for errors. I also recommend formatting it, make sure you uncheck quick format, choose FAT32 for file system and 32 for cluster size (not smaller!) and again.
also, read the build's info again, some builds require you creating a config file before you start, like the one in my sig, if so, you have to create that file before you start android.
hope that helps
Newbie here - used search feature, searched across forums. Did not find my problem addressed.
Putting CM7 on wife's NC 1.2.0. Followed huskermania's steps exactly. Everything installed fine until I got to the part where I selected format data. Then I received message, "error formatting data!" Everything stops right there and I have to power the unit down.
Re-downloaded the file twice - went through the complete process two times across several different times so as to avoid frustration causing more trouble! Using a Sandisk 8g class 4 card.
Using 7zip, cm7.0.3, and win32diskimager, and google add-ons, downloaded as directed by the husker dude.
In one section of his video, Huskermania moves files to the mSD - his files are shown as yellow folders. Mine show up as a small stack of books. When I look at the properties of my files, they are winrar zip archive files.
Please help! I'm so close!!
Thank you,
Jim
I believe your issue has been addressed more than one, maybe not exactly the same but pretty close.
Anyway, your NC is v1.2.0, often called "blue dot" which B&N decided to change the partition mapping, used to be 1GB /data & 5GB /media in v1.1, now be 5GB /data & 1GB /media in v1.2.0.
If you don't have a bootable uSD card with CwM Recovery 3.2.x.x or above, it will give you that error "cannot format /data". However, in my specific case, I did have the issue but my NC actually continued to next step, not hung and no need to force reboot.
I suggest you get the newer CwM (v 3.2.0.1) and give it a try again.
Votinh,
Thank you for your reply. As I learn, I am finding that sometimes I don't understand what to ask to find the solution!
I will try this today and report back.
Thank you again,
Jim
Wait!
I checked the version of the file I had used to install cwr and it is 3.2.0.1 - the same file that I was encouraged to try. To be more precise, it is "recovery-clockwork-3.2.0.1-bravo.
So, I'm still stuck.
HELP!
Thank you,
Jim
Can't offer anymore help, m8 but I don't think you should be panic.
If I were you, I would try to re-partition/re-format to 1GB /data 5GB /media, then using CwMR v3.0.2.8 and try again.
Great! Now, can you tell me how to do that?
Thank you,
Jim
I would suggest reading This first. Important info if you are going to muck around in the internal memory partitions.
Then I would go Here and see if this will help.
If not, This, This, or This might be your next best steps as far as reading and/or trying.
Also, This Sticky could shortcut you to the solution you need.
All these links go to XDA threads here in the Nook Color forums. They aren't all the recovery threads, but most of the more recent ones that could help you.
I haven't had to deal with what you're trying to handle, but this should be a great start/solution to solving your problem.
It's gonna take some reading and absorbing to comprehend what you're trying to accomplish, given the level familiarity you seem to have with your device and it's internal file structure.
(I mean no slight by this, the fact that you are here trying to learn and figure out your issue says much - welcome to the community btw )
Tcandroid,
Thank you for your input. I solved the problem by following votinh directions about partitioning. I'm finally up and running cm7!
Two concerns remain:
1. Do I need to worry about OTH updates from barnes and noble messing up my efforts? My hunch is no, just want to make sure. If so, how do I turn that off?
2. Can I over clock to 950 with what has already been installed, or do I need to download and install something else?
Thank you all so much!
Jim
Jim1970 said:
I'm finally up and running cm7!
Click to expand...
Click to collapse
This put a smile on my face, i'm glad to hear you got your issue resolved.
Nothing worse then having a wonderful piece of technology right in your hands that you can't use.
I have no doubt you are going to have a blast with it.
Cruise through the 'themes and apps' subforum here in Nook Color Forums, and you'll find some gems that are out there in the market.
I am not sure about the answers to either of your questions, but I do know that:
Some people have had to do some funky things to block B&N updates, and there have been conflicting answers on this. Again, only have seen in passing - so not sure what the whole story is here.
B&N doesn't push updates that often, so it's likely you have some time to figure this out.
I see people mentioning overclocking to 1200 a lot, so 950 shouldn't put too much stress on your machine. Depending on what version of CM7 you are running, you shouldn't use an external app to overclock. I've been using mine at the standard 800 and can play games like Samurai 2 (with chainfire installed) and it's no problem for the machine.
If your CM7 version provides you overclock settings, use those and not an outside app like SetCPU.
Some random info gleaned from browsing through this forum. Not too specific in addressing your query, yet maybe helpful in your continuing Android education.
Jim1970 said:
Tcandroid,
Thank you for your input. I solved the problem by following votinh directions about partitioning. I'm finally up and running cm7!
Two concerns remain:
1. Do I need to worry about OTH updates from barnes and noble messing up my efforts? My hunch is no, just want to make sure. If so, how do I turn that off?
2. Can I over clock to 950 with what has already been installed, or do I need to download and install something else?
Thank you all so much!
Jim
Click to expand...
Click to collapse
I help many people in many threads and tend not to remember the OP's original issue, so I have to re-read again
Firstly, congrats to you, do enjoy the NC running CM7. I bet by now, you are not a noob or newbie anymore, experience learnt.
Secondly,
1. since the NC is running CM7 ROM now, you don't have to worry about anything from B&N, even their new release probably won't be as good as the CM7.
2. by default, CM7 comes with kernel that can be overclocked to 925MHz (at least true on the v123 nightly build, not sure the latest) and again, it runs at 800MHz by default. You can set it under ??? (not on top of my head now and I don't have the NC in front of me, will update later).
If you want to run faster than 925MHz, you must install Dalingrin latest work - build on 06302011. Be sure download the "emmc" version since you run the CM7 off the internal memory.
can't seem to find any postings regarding the exact process on how to get my 8g internal SD back on my system that is why i ended up posting this. whenever i check it on the ideos, it is now disabled and it says unavailable. i also can't connect to my PC now via usb maybe because i don't have the internal SD. it happened when i try to partition my SD with Easyus Program in the hope that i may be able to install other programs into a more bigger space but then everything failed. I was already able to split it into 2 but i have slept over it and the next morning when i continued, i forgot where i have left last. i have tried to redo the whole thing all over again and started deleting the newly created partition and that was it. out of frustration and another hope that it might factory reset my unit in its original state and bring back my "unavailable SD". since then i can't get it back.
i have tried to browse all over here and also in other sites but there were no exact way how i will be able to get it available for use again. there are some that says i have to install the early android eclair version but there is just no place i can download that piece of os, not even on the huawei site. there are suggestions to use busybox and adb which i must admit that i have completely no knowledge of but willing to try if there will be guide to follow. the only problem on this way is my ideos7 can't communicate with my PC thru USB because of that missing internal SD card.
i hope somebody with a kind heart and knowledge can help me with this thing. i will surely appreciate it so much. this ideos is so dear to me and i just can't help to think the i ended up deleting its internal SD out of my stupidity.
thanks! you all have a nice day and continue enjoying your weekend.
details of my ideos7
it's a European Version, I guess this is the s7-104 with front camera only. It's running with the installed
Android Version: 2.2.2
Baseband: 504030
Kernel: 2.6.32.9-Ideos
Build Number: S7V100R001C98B021
I lost the rooting on the process and since then i can no longer have the way to root it back again because of the usb connection issue.
thanks again and hoping to get a big help from somebody out there.
UP
still hoping for anybody.
still hoping
for anybody who can help
Your problem, I think, has easy answer. You must to make a downgrade to android 2.1. In the huawei page you find the rom. in my case the problem is worse, my internal sd does not appear even as unavailable and i dont know to do.
regards
dead link
that's what i initially thought but all the links leading to this downgrade rom which is the 2.1 eclair, is already dead. i was lucky to find another but i see the fbi logo since it was the megaupload link. i have been looking for it even in the huawei site. everything is out already. i hope somebody out there has the Android 2.1 eclair that i can try. this i read from somewhere may be able to restore back my unavailable internal sd card.
thanks for reading and still hoping to get a copy or link for the android 2.1 eclair.
disregard all
i have found it already and it is back again. thanks a lot!
Same problem
I have the same problem as you. Can you send a link to the 2.1 eclair? I have searched for days...
1, the phone has root, and install better terminal emulator such as HyperTerminal simulation
2, in HyperTerminal, enter( su ）
3, and so become the # sign, type ( dd if=/dev/zero of=/dev/block/mmcblk0 ). Other end of the run,maybe wait 5 minutes. Restart the phone.
4, into the "Settings" - "sdcard and storage", u can be formatted with the built-in sdcard
Hi Guys! once i tried to use a different rom adn flashed CM11 but there was no exSD support to move apps and i really need that support so if you guys know of any rom with that support lemme know
btw NamelessRom have Sview Support and i was wondering if that rom have that ExtSD support,
Thanks in advance
Most if not all of the custom roms in this forum have that support but even if it does not there are several ways to fix the problem. It will take about two minutes to find several fixes if you search. The easiest I have found is download https://play.google.com/store/apps/details?id=com.devasque.fmount&hl=en. Launch the app, when it asks to reboot, let it. When it boots back up you will normally have access to your ext sdcard. You can even delete the app.
I Will Try
dyandell said:
Most if not all of the custom roms in this forum have that support but even if it does not there are several ways to fix the problem. It will take about two minutes to find several fixes if you search. The easiest I have found is download https://play.google.com/store/apps/details?id=com.devasque.fmount&hl=en. Launch the app, when it asks to reboot, let it. When it boots back up you will normally have access to your ext sdcard. You can even delete the app.
Click to expand...
Click to collapse
Thanks as i told you i tried once and it didnt have that support so i gave up on Custom Roms. i will try and thanks again
Just make sure and do some research before you post a question. Don't forget that the people who you are asking have spent hours doing their own research. The devs have not only done a lot of their own research, they have spent a LOT of time building these roms. I cannot imagine the amount of time they donate to us building these roms for us to use.
I am relatively new here, but was reading some threads and a couple people have said that the community hasn't found the 13.3.2.7 update to manually force a rollback. A couple days ago I called Amazon because I had updated to 4.5 and needed to go back to root.
Since then I have been looking around for where the patch was saved to and found the scripts that setup for the OS update and the scripts to run it. The scripts show where it is and what commands are called to do the update, but the actual 13.3.2.7 OS seems to be hidden. I know where it says it should be, but its hidden somehow. If this is something anyone wants copies of my files on let me know, if this isn't something the community needs I apologize, just trying to help get this tablet further along.
Either post here or message me if you want/need what I have.
Why don't you just post your findings so far on this thread?
I was under the impression that OTA files are downloaded to the /cache folder, therefore inaccessible without root.
Either way, updates are still verified (see: /system/app/otaverifier.apk) by the system, so I'm not sure how you'd get around that.
EncryptedCurse said:
Why don't you just post your findings so far on this thread?
I was under the impression that OTA files are downloaded to the /cache folder, therefore inaccessible without root.
Either way, updates are still verified (see: /system/app/otaverifier.apk) by the system, so I'm not sure how you'd get around that.
Click to expand...
Click to collapse
I see, that part is already known then. Other posts I read people were still looking for it, but I was sure if i found it many others have too. I'm still looking around though, I found the verification coding also, thanks for that. I am thinking about updating my tablet again, and having them roll it back again, but this time running a packet sniffer. Might possibly get some really good info about the verification process or at least the steps it takes to make the rollback. I did a search but haven't seen anyone try this, it's probably heavily encoded though.
Another thing I noticed while looking around... They put a kill switch fuse in it? That's pretty rough, and what causes it to activate? Software modification or Hardware like Jtags?
Eclipsys said:
I see, that part is already known then. Other posts I read people were still looking for it, but I was sure if i found it many others have too. I'm still looking around though, I found the verification coding also, thanks for that. I am thinking about updating my tablet again, and having them roll it back again, but this time running a packet sniffer. Might possibly get some really good info about the verification process or at least the steps it takes to make the rollback. I did a search but haven't seen anyone try this, it's probably heavily encoded though.
Another thing I noticed while looking around... They put a kill switch fuse in it? That's pretty rough, and what causes it to activate? Software modification or Hardware like Jtags?
Click to expand...
Click to collapse
once rooted again .it may be possible to modify your build.prop like we were on past firmware to achieve rollback just to initiate download ,it will ultimately fail once it downloaded it and trys to install it will check a few more things it will fail and erase it ...the trick would be not too let the device idle..or to have the battery below I believe 30 percent it may be as high as 40 I'm not sure but I believe under 30 it will refuse to install update delay till charged ,anyway it may buy you time to find it
jimyv said:
once rooted again .it may be possible to modify your build.prop like we were on past firmware to achieve rollback just to initiate download ,it will ultimately fail once it downloaded it and trys to install it will check a few more things it will fail and erase it ...the trick would be not too let the device idle..or to have the battery below I believe 30 percent it may be as high as 40 I'm not sure but I believe under 30 it will refuse to install update delay till charged ,anyway it may buy you time to find it
Click to expand...
Click to collapse
That is actually a very good idea, something I am testing right now is getting the FireOS to run in VMware. I have a standard Android KitKat OS running, but getting the Kindle's OS to run is giving me a few issues. I am very skittish to try this stuff on my actual device as it's brand new and I don't have a backup... But if I can I will give you idea a shot. Might be able to save it before it deletes. Also if I can get it going in VMware it might be possible to use a debugger to examine the ASM code in great detail.
Eclipsys said:
That is actually a very good idea, something I am testing right now is getting the FireOS to run in VMware. I have a standard Android KitKat OS running, but getting the Kindle's OS to run is giving me a few issues. I am very skittish to try this stuff on my actual device as it's brand new and I don't have a backup... But if I can I will give you idea a shot. Might be able to save it before it deletes. Also if I can get it going in VMware it might be possible to use a debugger to examine the ASM code in great detail.
Click to expand...
Click to collapse
I didn't have any problem doing the modifications myself and I'm no Pro that's for sure. Never written a line of code in my life. I just tend to thoroughly research and understand before I attempt things and I've been practicing here for a while if you go to the, rollback .0.1 and safestraped thread there is quite detailed instructions serval times throughout the thread I would skim it.you will just be substituting version numbers and kind of a inverse idea compared to what we were doing there but it should accomplish it. I used rOM Toolbox lite I believe as an editor and saved each timeI didn't have any problems with the permissions getting screwed up while tampering with it rOM Toolbox took care of that issue. I have seen tons of people brick trying to make these modifications. But I don't think they understood completely what they were attempting to do it's actually very simple and as long as you do it thoroughly and get all of them changed I have not seen any problems other than maybe having to repeat the process.there are a couple of lines that only use the last section of your version numbers I even changed those back then.
Eclipsys said:
I am relatively new here, but was reading some threads and a couple people have said that the community hasn't found the 13.3.2.7 update to manually force a rollback. A couple days ago I called Amazon because I had updated to 4.5 and needed to go back to root.
Since then I have been looking around for where the patch was saved to and found the scripts that setup for the OS update and the scripts to run it. The scripts show where it is and what commands are called to do the update, but the actual 13.3.2.7 OS seems to be hidden. I know where it says it should be, but its hidden somehow. If this is something anyone wants copies of my files on let me know, if this isn't something the community needs I apologize, just trying to help get this tablet further along.
Either post here or message me if you want/need what I have.
Click to expand...
Click to collapse
Please upload the file somewhere (preferably to mega). If it doesn't pass the version check we can use my hack to bypass it.
p1gl3t said:
Please upload the file somewhere (preferably to mega). If it doesn't pass the version check we can use my hack to bypass it.
Click to expand...
Click to collapse
https://mega.co.nz/#!wlQl2bZD!Kk-rcWtcMPWxoEH5VcHrtZb7nOsJet9si1pm5FYhT44
5.2 build prop file