need help please - Lenovo A6000/Plus Questions & Answers

Can you tell what is the problem and how can I fix itView attachment 4303335 now the phone is only getting to recovery

Kanish12 said:
Can you tell what is the problem and how can I fix itView attachment 4303335 now the phone is only getting to recovery
Click to expand...
Click to collapse
Flash a custom recovery and then wipe the cache and dalvik partitions. Moreover, I'll suggest you to flash a custom ROM. They are 1000x better than stock.

Related

[HELP] I think I have bricked it.

Guys, I was about to flash a new rom (Omega v2 for i9500) then I wiped the whole thing in CWM. But in addition to that I have formatted the system (mounts and format > format system), now device won't boot. I can get in Download Mode and Recovery mode but it just won't boot...
Now I am downloading a stock ROM from SamMobile; would it fix it if i flash it via Odin? And any suggestions?
Please tell me something because I am feeling really bad =/.
holygeek said:
Guys, I was about to flash a new rom (Omega v2 for i9500) then I wiped the whole thing in CWM. But in addition to that I have formatted the system (mounts and format > format system), now device won't boot. I can get in Download Mode and Recovery mode but it just won't boot...
Now I am downloading a stock ROM from SamMobile; would it fix it if i flash it via Odin? And any suggestions?
Please tell me something because I am feeling really bad =/.
Click to expand...
Click to collapse
always do a backup via cwm for your rooted stock rom after rooting!
did you flash the rom after formatting system?
any way, Odin should fix it
samersh72 said:
always do a backup via cwm for your rooted stock rom after rooting!
did you flash the rom after formatting system?
any way, Odin should fix it
Click to expand...
Click to collapse
You are right =/ I should have done a backup.. Yea' I did flash the ROM after formatting system but won't boot.
holygeek said:
You are right =/ I should have done a backup.. Yea' I did flash the ROM after formatting system but won't boot.
Click to expand...
Click to collapse
wipe data and cache and dalvik, reflash the rom, rewipe data and cache and dalvik, reboot.
if not, you have odin.
samersh72 said:
wipe data and cache and dalvik, reflash the rom, rewipe data and cache and dalvik, reboot.
if not, you have odin.
Click to expand...
Click to collapse
Yes I have tried it many times. The downlaod is about to end now, I am so freaking nerveous right now, I hope it will fix it!..

[Q] How do I flash from L To a custom AOSP KITKAT

How do I flash from L To a custom AOSP KITKAT? Do I need to flash the factory image at first or I just boot into recvoery and flash the cutom rom?Did anybody know? THX!
To be safe, you'd do a factory image flash. That way you know you have a good starting point. There's the boot image, including the ramdisk, and radio (depending on what platform you're running on) that would have changed.
Or, if you're feeling lucky, clean wipe and flash your new ROM. What's the worse case scenario? You have to do it twice.
siaga said:
How do I flash from L To a custom AOSP KITKAT? Do I need to flash the factory image at first or I just boot into recvoery and flash the cutom rom?Did anybody know? THX!
Click to expand...
Click to collapse
The safest way is
Download L port
factory reset once
wipe cache dalvik
flash ROM
wipe cache and dalvik again
reboot
done,
Gapps included.
I never got problem with these steps.
Rohit02 said:
The safest way is
Download L port
factory reset once
wipe cache dalvik
flash ROM
wipe cache and dalvik again
reboot
done,
Gapps included.
I never got problem with these steps.
Click to expand...
Click to collapse
no need to format storage?
thanks in advanced
Rohit02 said:
The safest way is
Download L port
factory reset once
wipe cache dalvik
flash ROM
wipe cache and dalvik again
reboot
done,
Gapps included.
I never got problem with these steps.
Click to expand...
Click to collapse
Hey,guys,I have just ask the L's developer ,he said that the L he developed uses the same baseband and bootloader as the Kitkat,so there is no need to flash a factory image at first , instead ,we can just directly flash the Kitkat aosp ,Thanks for his kindness!
qaz2453 said:
no need to format storage?
thanks in advanced
Click to expand...
Click to collapse
That's what he meant. Format system and data. You'll find that option on the custom recovery.
qaz2453 said:
no need to format storage?
thanks in advanced
Click to expand...
Click to collapse
You just need to get a flashable one and your good to go. Just wipe system, data and caches and flash it. I tried both ways by recovery and by script and its the same experience. But if you follow the script and flash through PC you'll surely lose all your data.

BIRCK VNS-L31 Help Me Pls

So i have the VNS-L31 and i instaled cm 13 and my phone wold boot for like 30 sec and then go into erecovery i have tryd to reformat reflash and nothing works please help me
Download again the ROM and install again, your download might be currupted
Potato997 said:
Download again the ROM and install again, your download might be currupted
Click to expand...
Click to collapse
nope didint work it just boots in to erecovry
Can you tell me what steps did you do?
Potato997 said:
Can you tell me what steps did you do?
Click to expand...
Click to collapse
first i formated evry ting exept sd card and then i installed cm 13
Try in this way:
In TWRP, flash ROM and GApps
Wipe cache and dalvik cache
Reboot to TWRP again from the reboot menù
Click on Wipe, click on Format Data
Type yes and confirm
Reboot to system
Usually in this way it works, if it doesn't, unfortunately I can't help you anymore
Potato997 said:
Try in this way:
In TWRP, flash ROM and GApps
Wipe cache and dalvik cache
Reboot to TWRP again from the reboot menù
Click on Wipe, click on Format Data
Type yes and confirm
Reboot to system
Usually in this way it works, if it doesn't, unfortunately I can't help you anymore
Click to expand...
Click to collapse
nope didint work

HARD Brick Urgent Help

anyone pls help,
my phone is totally bricked when im click on resat it shows unable to mount cache (no such device).
i was format my device in wipe option just typing "yes" for F2FS.
pls help
akash shaky said:
anyone pls help,
my phone is totally bricked when im click on resat it shows unable to mount cache (no such device).
i was format my device in wipe option just typing "yes" for F2FS.
pls help
Click to expand...
Click to collapse
If you can get to recovery or fastboot its not bricked.Which recovery are u using.Flash the newest and then try wipping wverything again and flashing rom
Yes,I can get into recovery and fastboot mode also now yesterday i was restore my old stock lollipop rom.it is run very well but in twrp recovery I'm doing wipe cache ,data,system etc it's say unable to mount cache (no such device).
see image
JovanSijacki said:
If you can get to recovery or fastboot its not bricked.Which recovery are u using.Flash the newest and then try wipping wverything again and flashing rom
Click to expand...
Click to collapse
Doing wiping system,cache,data etc See this msg
akash shaky said:
Doing wiping system,cache,data etc See this msg
Click to expand...
Click to collapse
Change recovery
JovanSijacki said:
Change recovery
Click to expand...
Click to collapse
Can u send me flashable latast twrp recovery link?

i got this error when flashing every custom rom

Hi, Please help
I always got this error when i flashing every custom rom with TWRP, even though i follow the tutorial from the custom rom thread.
i'm using TWRP 3.2.1-2 from mohancm, and the log is in attachment.
Thanks
You need to format your data
Did you wipe System, Cache, Data and/or Internal storage before flashing?
Afisall_James said:
You need to format your data
Click to expand...
Click to collapse
SmallTarzan said:
Did you wipe System, Cache, Data and/or Internal storage before flashing?
Click to expand...
Click to collapse
yes of course i wipe system, data, and dalvik. Only internal i didn't wipe
rasputine said:
yes of course i wipe system, data, and dalvik. Only internal i didn't wipe
Click to expand...
Click to collapse
Yeah, you need to wipe your internal storage
Afisall_James said:
Yeah, you need to wipe your internal storage
Click to expand...
Click to collapse
wow it works, thanks
Afisall_James said:
Yeah, you need to wipe your internal storage
Click to expand...
Click to collapse
Doesn't work in my case
Please help
Mohit# said:
Doesn't work in my case
Please help
Click to expand...
Click to collapse
Try format data
Afisall_James said:
Try format data
Click to expand...
Click to collapse
I tried but it doesn't work
change your twrp if you are coming from nougat then use deadman recovery or use oreo recovery
farokhan478 said:
change your twrp if you are coming from nougat then use deadman recovery or use oreo recovery
Click to expand...
Click to collapse
I'm on Oreo
And using twrp
rasputine said:
Hi, Please help
I always got this error when i flashing every custom rom with TWRP, even though i follow the tutorial from the custom rom thread.
i'm using TWRP 3.2.1-2 from mohancm, and the log is in attachment.
Thanks
Click to expand...
Click to collapse
Follow this
-First and the foremost point, remove any kind of security/screen locks. Remove all the fingerprints & set the lock screen lock to none.
- Flash latest Stock Oreo build, along with it's firmware.
- Download latest build & gapps.
- Boot into latest TWRP.
- Wipe system, cache & data.
- Flash the ROM & TWRP installer.
- REBOOT BACK TO RECOVERY & flash gapps
- Reboot and ENJOY
Sent from my tissot using XDA Labs
Mohit# said:
I'm on Oreo
And using twrp
Click to expand...
Click to collapse
what i do : ignore the error
seriously, just do the step.
i forgot to switch slot, thats why i cant boot or flash gapps
Mohit# said:
I'm on Oreo
And using twrp
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=818070582850498337 use this one dont flash it just boot into twrp and flash

Categories

Resources