Low top/left speaker volume - Nexus 6P Q&A, Help & Troubleshooting

I have a very unusual problem. About a week ago, I noticed that the left speaker was very soft. I tried wiping everything, changing Android version. I did fiddle with mixer paths XML earlier and reduced left speaker gain. It should have been replaced many times by now. I've also been using viper, Dolby and trying out other sound mods.
Thinking it might be a hardware problem, I had it replaced. However, the technician did say if the speaker is broken, it will either be no sound or a cracked sound. Not soft. He cleaned the whole area as well.
No improvement at all. Just now, I tried a pair of external speakers. The left was extremely soft. So it is pretty much confirmed software related. For the life of me, I can't figure it out. I'm on stock Oreo now with no mods or apps installed. Can still barely hear anything on calls and Google music.
Any help would be greatly appreciated. Thanks.

tropical cactus said:
I have a very unusual problem. About a week ago, I noticed that the left speaker was very soft. I tried wiping everything, changing Android version. I did fiddle with mixer paths XML earlier and reduced left speaker gain. It should have been replaced many times by now. I've also been using viper, Dolby and trying out other sound mods.
Thinking it might be a hardware problem, I had it replaced. However, the technician did say if the speaker is broken, it will either be no sound or a cracked sound. Not soft. He cleaned the whole area as well.
No improvement at all. Just now, I tried a pair of external speakers. The left was extremely soft. So it is pretty much confirmed software related. For the life of me, I can't figure it out. I'm on stock Oreo now with no mods or apps installed. Can still barely hear anything on calls and Google music.
Any help would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
I have been facing the same issue.

Bump.

tropical cactus said:
I have a very unusual problem. About a week ago, I noticed that the left speaker was very soft. I tried wiping everything, changing Android version. I did fiddle with mixer paths XML earlier and reduced left speaker gain. It should have been replaced many times by now. I've also been using viper, Dolby and trying out other sound mods.
Thinking it might be a hardware problem, I had it replaced. However, the technician did say if the speaker is broken, it will either be no sound or a cracked sound. Not soft. He cleaned the whole area as well.
No improvement at all. Just now, I tried a pair of external speakers. The left was extremely soft. So it is pretty much confirmed software related. For the life of me, I can't figure it out. I'm on stock Oreo now with no mods or apps installed. Can still barely hear anything on calls and Google music.
Any help would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
I found this solution on XDA. It works for me. But unfortunately after modified xml file battery drain faster than before. https://www.google.com.kh/amp/s/for.../mod-boost-call-handset-volume-t3329419/page1

Bondeth hun said:
I found this solution on XDA. It works for me. But unfortunately after modified xml file battery drain faster than before. https://www.google.com.kh/amp/s/for.../mod-boost-call-handset-volume-t3329419/page1
Click to expand...
Click to collapse
Thank you so much. At first there wasn't any difference. After a short ride in the car using Bluetooth audio, the left speaker is now back to 80℅. Better than nothing. The YouTube stereo speaker test sounds a near balance between left and right. A little more experimentation and I'll see if it can be back to the same. Thanks again.

Related

Damaging speaker of XDA II is as easy as 123? true or false?

Well i think its true. why? read on!
I bought my XDA II a few weeks ago. Its a love & hate machine & i won't get into that. But i think i have damaged the speaker .. as in i can notice sound getting distorted at times. It probably happened when i played this audio file at full volume .. which was actually for less than 2 seconds!! Ever since then, i can tell how the sound from the speaker comes out distorted. Same exact thing happened with my brother, where he played some song at full volume & it apperntly blew his speaker. I've soft reseted the machine multiple times (who doesn't!) ever since but no hard reset yet.
Although my question is .. is it really _that_ easy to blow the speaker?! The device should either have a speaker that can handle the amplification it is being providing, or not amplify the sound to levels the speaker can't handle. Blowing your speaker away on the first attempt to play something loud seems awfully lousy to me from a machine's design point of view.
Has anyone else experienced such problem or know of some remedy? I don't want to open the machine up & get the speaker repaired. Would really appreciate any help on the matter.
Thank you all.
Hi m8. Don't know if you've tried this but I had a problem a while ago where I could not hear any sound at all. I could make a phone call and ther person on the other end could hear me fine but I could not hear anything. I found the way to make it work again would be to squeeze the thing at the top near the earpiece (as if it was a loose connection).
Like I said, don't know if you've tried this but it worked for me. Have you got warranty?
Hey Camel, i have had my sx56(wallaby) all the way apart, and the only thing attatching the mainboard to the speaker are two little spring-loaded contacts, perhaps try tightening the screws on the back of your device (if it's anything like mine), this should make the connection between your speaker and mainboard more secure.
Tim
speaker
hey mate,
yep same thing with mine. now anything above about 50% in a phone call and it's all distorted.
pretty annoying, i've just got to get around to opening it up and checking the speaker contacts/replacing speaker with a spare.
will post results.

Speaker volume suddenly low

Last night I played a YouTube clip at full volume (Will It Blend - iPad). The speaker was loud and clear as it has always been for me.
Just this morning the speaker is suddenly much quieter -- volume is still the same. There seems to be no loss in sound quality, it's just a lot quieter. I noticed this when my ring was playing and while watching a few YouTube videos.
Is it possible I somehow damaged the rear speaker with the loud playback of blending metal? I tried flashing a ROM and it didn't help. Again there seems to be no loss in the fidelity of the speaker or its characteristics, just the overall volume level. It's very troublesome since at 100% now it's about the equivalent of 60% of what it was before.
Are there any registry settings I might want to check out to try to boost up the speaker, or just check if they somehow changed and made things quieter?
I am having the exact same issue .. flashed to a new ROM, then the volume is about half of what it usually is - no loss of fidelity, just pure volume.
Have done some searching but there are not a lot of answers, hoping someone with better skills than I can help out.
svartrayne said:
I am having the exact same issue .. flashed to a new ROM, then the volume is about half of what it usually is - no loss of fidelity, just pure volume.
Have done some searching but there are not a lot of answers, hoping someone with better skills than I can help out.
Click to expand...
Click to collapse
Figured it out.. it is actually the new ROM that caused the issue, silly me. Turns out the sounds were playing out of the earspeaker after I flashed to the new UniQ ROM. g.lewarne posted a .cab that resolves the issue.
friend'scatdied said:
Figured it out.. it is actually the new ROM that caused the issue, silly me. Turns out the sounds were playing out of the earspeaker after I flashed to the new UniQ ROM. g.lewarne posted a .cab that resolves the issue.
Click to expand...
Click to collapse
lol - exactly what I was coming back to say.

No sound from loudspeaker, maybe hardware problem

Hello guys! My loudspeaker suddenly stopped working few weeks ago. I know the cause, and I am pretty sure it is hardware related.
Here is the story:
I installed this ROM (don't think it's important). It worked fine for about a month. The sound volume was lower than MoKee or MIUI, so I started searching for some solution.
I followed a guide similar to this to boost volume, and it worked!
Although I read in the post to not set the value over 95 (to avoid damaging speakers), I decided anyway to set it to 100, because I didn't think that could happen. Sound was very loud, and I was very happy.
Next morning, alarm screamed very strong, but suddenly stopped ringing. I realized my mistake, loudspeaker is completely mute since then.
Earpiece, headphones, microphones work, everything works except loudspeaker.
I hoped so much that was software. I formatted and installed some other ROMs (MoKee, MIUI, CM12) but still no sound. Then I restored a previous MoKee backup (taken when sound worked) but no success. Unfortunately it's a hardware thing.
I bought a new loudspeaker, learnt from YouTube how to open the Note, and replaced it. Still no sound.
Then I tested both loudspeakers (the original and the one I bought) and they both emit sound when attached to an external source (jack plugged to mp3 player). So the problem is not in the loudspeaker itself!
My knowledge ends here.
How can sound stop working by simply raising a software value? But above all, how can the loudspeaker work correctly, but not when placed into the phone? Is there another component that can be damaged in abovementioned way? If so, can that component be replaced?
I hope somebody could share some knowledge to help me solve the problem, or at least point to the right direction. Thanks in advance.
Open your Phone and look if something "looks" broken and make a picture for analysing. It can be not anything but more that just one piece that's broken.
(Sry for bad English, I'm from Germany)
OverBit said:
Open your Phone and look if something "looks" broken and make a picture for analysing. It can be not anything but more that just one piece that's broken.
Click to expand...
Click to collapse
I opened it many times today, but discovered nothing wrong or weird, although I'm not an expert so maybe I simply haven't noticed.
Will post picture as soon as I manage to take photo without phone
Yeah, its like taking a selfie with your phone on your phone without mirrors, only Chuck Norris can do that
(sry for bad English, I'm from Germany)
Some photos
I resurrected my old phone and took some photos. As I said, there's apparently nothing weird, nothing that appears burned or cut.
Here three photos (full phone, upper part, lower part) the loudspeaker contacts are highlighted.
I don't expect a hint on how to fix that (although I hope so much ) because I know this forum is meant for developers/modders/those working with software. My real question is:
Why after just altering value in mixer_paths.xml my phone is now mute? Can someone describe how the sound goes from the CPU to the loudspeaker? Is there something I can do?
udda90 said:
I resurrected my old phone and took some photos. As I said, there's apparently nothing weird, nothing that appears burned or cut.
Here three photos (full phone, upper part, lower part) the loudspeaker contacts are highlighted.
I don't expect a hint on how to fix that (although I hope so much ) because I know this forum is meant for developers/modders/those working with software. My real question is:
Why after just altering value in mixer_paths.xml my phone is now mute? Can someone describe how the sound goes from the CPU to the loudspeaker? Is there something I can do?
Click to expand...
Click to collapse
I did the exact same thing. I replaced the loudspeaker just like you. My sound still doesn't work. I have done a complete factory reset and tried new roms and nothing works.
tripper22 said:
I did the exact same thing. I replaced the loudspeaker just like you. My sound still doesn't work. I have done a complete factory reset and tried new roms and nothing works.
Click to expand...
Click to collapse
My friend device redmi note 3g got same problem.. tired change with new rom.. new speaker..and factory reset that all not work..so open the case..and discovered .the problem came from cpu/chip . coz mtk chipset camera n sound came from cpu..
Hi Guys
I have exactly the same problem with my Xiaomi Mi3. After display replacement lound speaker stopped working. While I had broken display (just the touch screen, dispay was fine) loudspeaker worked fine (I cannot switch off alarm, even shut down the phone)
I bought new speaker, but sound still doesn't work. Do you think that it is comming from CPU? It is possible but I don't think so, because everything works fine via earphones or bluetooth speaker.
Did you find any solution?
tripper22 said:
I did the exact same thing. I replaced the loudspeaker just like you. My sound still doesn't work. I have done a complete factory reset and tried new roms and nothing works.
Click to expand...
Click to collapse
nokovica said:
Hi Guys
I have exactly the same problem with my Xiaomi Mi3. After display replacement lound speaker stopped working. While I had broken display (just the touch screen, dispay was fine) loudspeaker worked fine (I cannot switch off alarm, even shut down the phone)
I bought new speaker, but sound still doesn't work. Do you think that it is comming from CPU? It is possible but I don't think so, because everything works fine via earphones or bluetooth speaker.
Did you find any solution?
Click to expand...
Click to collapse
I tried many other ways, none of them worked. I ended up buying a small BT speaker and carrying always with me.
In my case I learned in the worst way that excessive software amplification can burn audio chip. I replaced EVERY replaceable part (speaker, USB/speaker lower board, main ribbon cable, maybe others I don't remember) with no success.
@tripper22 I think you have no options. If you did my same steps, sadly your sound is lost. I have not yet replaced my phone only because there was a recent increase in development, and many custom ROMs to flash, but I will probably change that phone sooner or later.
@nokovica My sound from earphones or bluetooth is working too. I remembre reading that the audio amplifier is in a separate chip.
Anyway, your problem looks like a HARDWARE issue, since you didn't played with system configuiration. This is easier to fix (if it's fixable, of course).
If you did the replacement, you could check twice if some ribbon cable went damaged. You could try turning on your phone while open (remove back panel and expose board and cables) and see if works this way. You could check with a multimeter wether some signal (albeit small) come to the buzzer. In my case I discovered that a little signal (2-5 mV peak) reached the buzzer, but wasn't enough to make a sound. Rechecking after some months revealed that even that little signal is now gone (maybe sound chip damaged further).
If someone else did the replacement (hopefully Xiaomi assistance) it's their fault, and you can usually ask for repair for free.
Mi3 Loud Speaker Problem
@nokovica
Even I am facing the same problem with my Mi3 . After screen replacement ( touch + digitizer ) My loud speaker is not working , however phone speakar and mic is working perfectly fine , even the headphones too. I also detected one of the problem with Network Signals , if last for only few seconds and then it goes off , i tried placing many sims, but no luck . Can any one in the forum provide some solution to the Network Signals ?
even I have the same problem with my redmi note 3. I just opened back case, sub-board loudspeaker and re-assembled it. I didn't touch motherboard or any flex on upper side. Loudspeaker stopped working since then. Swapped with new part but it still doesn't work. Headphones and ear piece works fine. doesn't play music on bluetooth but hands-free works on bluetooth. how could have damaged audio chip on motherboard?? I barely touch it. didn't even unscrew it.
ilyasabdul said:
even I have the same problem with my redmi note 3. I just opened back case, sub-board loudspeaker and re-assembled it. I didn't touch motherboard or any flex on upper side. Loudspeaker stopped working since then. Swapped with new part but it still doesn't work. Headphones and ear piece works fine. doesn't play music on bluetooth but hands-free works on bluetooth. how could have damaged audio chip on motherboard?? I barely touch it. didn't even unscrew it.
Click to expand...
Click to collapse
Did you solve? I have exactly the same problem
I have faced with no audio (at all) with mi5s
couldnt call or answer (hanging phone)
speakers dont work
erarphone dont work
i flash several times the phone and reste factory it and no change.
i read somewhere thet it resolved with warming sound IC in mainboard.
have any body solution or explane to problem?

Note 4 earphone jack question/problem. Help/advice wanted for troubleshooting/fixing.

Hi All.
Have not posted on here in a LONG WHILE, but here goes:
Recently I got my hands on a Note 4 (SM-N910S) (its one of those Korean models that have LTE-A X3)
and when I first got my hands on it it was fine and all, but after a while, whatever earphone I plugged in, it sounded weird, and the only solution was to bias the sound to the left (in PowerAmp, my music app of choice) which somehow centered the sound but it sounded like it was on Mono the whole time as I could not hear the whole range of speakers being used.
Last week I dropped by a repair center and asked for a jack replacement, they charged me 10$ for the part and about 20$ for the labor (I was busy so I said hell with it). After I received it back, There is still a problem
Now what happens is the sound appears to be very muddy, and if, for example I was listening to something with a large variety of sound, like heavy metal or EDM, it sounds really drowned and far away, and the bass seems non-existent at all, and the speakers which seem like they are there for bass and/or sound directed to sort of rear-way are not working at all, and the treble side of things seem very harsh. When I bias the sound to the left now, what happens is the volume seems to decrease!
So before I spend any money on this thing, I want to know if you guys think I still need the jack replaced (this time by me maybe) or if something else is wrong, because I use this phone heavily for music (nearly 30gb worth loaded on it, used very heavily, on the daily) as well as for entertainment purposes, so it is very important to me I get this thing on track.
Any advice is welcome, as I am also quite desperate to solve this issue.
Oh, and the phone is pretty much brand new, got it on christmas/januaryish, and has never been damaged or used hardly, its only been rooted, and is currently on 5.1.1
IF I did post this to the wrong section, mods I am sorry, please feel free to move it.
Thanks in advance to any help. :good:
Have you tried adjusting the sound settings on the music player app? Does this happen with other headsets?
DarkGuyver said:
Have you tried adjusting the sound settings on the music player app? Does this happen with other headsets?
Click to expand...
Click to collapse
Yes I have, as I said, ive tried multiple headsets, and ive tried all the settings and multiple apps. I can tell it is a hardware problem since when I send the sound to the left earphone, it only lowers the volume, but the sound doesn't move/bias.
Why not try a pair of bluetooth headphones. It will establish if there are problems with the sound DAC of the board or if it is a hardware fault pertaining to the headphone jack connectors. If its the sound DCA it might also go away with a reflash of the factory image through Odin.

[A2017G] Bottom speaker louder than top speaker

STILL NOT FIXED
I have rooted and unlocked my Axon 7 (A2017G) and edited the mixer_paths.xml file to make the audio output louder.
But there's a little problem (and I don't know if it's because of the mixer paths edit, I don't think so)
My top speaker sounds a lot more dull than my bottom speaker. My bottom speakers seem to be louder too.
How to check this? And are there more people experiencing this?
Thanks in advance.
Did not do anything to my A2017G, but I find that my top speaker is louder and "sparks" when near at full volume
nigelnkj said:
Did not do anything to my A2017G, but I find that my top speaker is louder and "sparks" when near at full volume
Click to expand...
Click to collapse
Some say it's dust, but I don't know how. I haven't called with this phone much.
Bump. It's everywhere. Even on LineageOS, bottom speaker is almost twice as loud :/ It can't be dust.
BUMP
This problem is getting on my nerves. The bottom speaker is twice as loud and crispy as the top speaker, which sounds dull.
Anyone else had this and possibly fixed it?
Two questions
Did you try to reset your phone and test the speakers again?
Is there the same problem on YouTube and mp3 music files?
SilentEYE said:
Two questions
Did you try to reset your phone and test the speakers again?
Is there the same problem on YouTube and mp3 music files?
Click to expand...
Click to collapse
1. Yes I switched between roms to test modems and other stuff for ZTE.
2. Ofcourse. It's obviously the same on every output.
I guess it's just a hardware fault, but I thought maybe someone would have fix (clean it or something?)
Then I would say that this is an hardware problem indeed.
Having the same issue here, thought that other ROM will provide the fix but still zilch. Rooting the phone only meant the void of guarantee so not really good move there either.
I read somewhere online that usually bottom speaker is the one to go out first and that global version has the speakers a lot different then American and Chinese version). Any other possible fixes before replacing it? And where to find the replacement too?
Update: it should be software related since the sound in earphones has the same problem - only inverted. Which means there should be a tweak in binary or something?
I'm willing to pay to whoever makes this problem disappear. I'm beyond the point of helplessness here...
Fixed!
Fixed the issue finally! ??
Go to:
- settings
- advanced settings
- accessibility
- mono speaker output.
For the last trick to work, just try to disable it, then enable it and restart the device. Disable it again when device rebooted. Worked as a charm for me! So I'll be saving me some money ???
oFFgotoFF said:
Fixed the issue finally!
Go to:
- settings
- advanced settings
- accessibility
- mono speaker output.
For the last trick to work, just try to disable it, then enable it and restart the device. Disable it again when device rebooted. Worked as a charm for me! So I'll be saving me some money
Click to expand...
Click to collapse
Omg! This problem was bugging me since day 1, but could not find any solution to this... But I've tried what you said and it works wonders! Can't believe I can now finally listen to music the way it was intented, since having a speaker with lower volume on a stereo setup is very annoying. Thank you very much for sharing the solution with us!
Andrew-X said:
Omg! This problem was bugging me since day 1, but could not find any solution to this... But I've tried what you said and it works wonders! Can't believe I can now finally listen to music the way it was intented, since having a speaker with lower volume on a stereo setup is very annoying. Thank you very much for sharing the solution with us!
Click to expand...
Click to collapse
You're welcome buddy, I can imagine your happiness and that smile is thanks enough. Cheers.

Categories

Resources