Database Users

GApps which version for Note 3 SM-N9005 LTE

Hi Ive looked at the specs for my CPU but it doesnt say whether its ARM based or what.
I guess GApps ARM would be a safe bet, but can anyone confirm please which Google Apps would be the recommended way to go for this CPU
http://opengapps.org/?api=5.1&variant=nano
I went for ARM 5.1 AROMA
Thanks,
Alistair.

Determine which apps you need on the phone and that will determine which version (i.e. nano, full, etc.) of Gapps to install.
http://forum.xda-developers.com/android/software/reborn-gapps-5-t3074660

audit13 said:
Determine which apps you need on the phone and that will determine which version (i.e. nano, full, etc.) of Gapps to install.
Click to expand...
Click to collapse
Hi there the apps you referred to are all 32-bit so should be safe for most variants, but as some apps are made for a certain type of CPU and especially if its rooted and you try to install it may let you proceed.
Hi Ive looked at the specs for my CPU but it doesnt say whether its ARM based or what.
So Id like to know what type of CPU is correct for the SM-N9005 on below page:
http://opengapps.org/?api=5.1&variant=nano
Thanks. Al.

The CPU is arm based x86 and any arm based x86 gapps should work.

Yo no puedo instalar ninguna Gapps en mi Sansung galaxy note 3 N9005,las he provado todas ...
Mod translation via GT: I can't install any Gapps on my Samsung galaxy note 3 N9005, I've tried them all...

You could tell us what rom you are using .

Linmeageos 18.1 ,lo tengo a

Try reading the roms thread
as per
microg or opengapps beta

Hola. La gapps que me ha funcionado con galaxy note 3 , Nikgapps-core-arme64-11-202110501-signed , y crDroidAndroid-11-20220516-hlte-v7.18.. Va perfecto y se calienta poco y funciona Google play storer.
La lineageos 19 no funciona bien con la gapps 12 ,se calienta mucho y la he tenido que desinstalar ,
Un saludo...
Mod translation via GT:
Hello. The gapps that has worked for me with galaxy note 3, Nikgapps-core-arme64-11-202110501-signed, and crDroidAndroid-11-20220516-hlte-v7.18.. It works perfectly and heats up a little and Google play storer works.
The lineageos 19 does not work well with the gapps 12, it gets very hot and I have had to uninstall it,
All the best...

Samsung galaxy j5 android version 7.0 download link

Please am in dire need of samsung Galaxy J5 nougat download link.....i will really appreciate it if you guys can help out.

Como se descarga en el celular

Android N is'nt available for Samsung J5 until now. Let's just be patient and wait for a Stock Rom or CM-14 Unofficial Release..

HUAWE Y6 ADB KIT

We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we wil​
KIT HERRAMIENTA ADB PARA HUAWEI Y6​
Descripción​Herramienta ADB "Android Debug Bridge" con RECOVERY TWRP 2.8 Y RECOVERY ORIGINAL incluido, sirve tambien para instalar FIRMWARE Original desde WINDOWS, Tutorial incluido en el KIT,solo en español ( TUTORIAL ONLY SPANISH FOR NOW)​
HUAWEI FIRMWARE PAGINA OFICIAL LINK:http://consumer.huawei.com/cl/support/downloads/index.htm
FIRMWARE SCL-L02 LINK:http://consumer.huawei.com/nz/mobile-phones/support/downloads/detail/y6-nz.htm?id=67784
FIRMWARE SCL-L03 LINK:http://shink.in/oRXF2
FIRMWARE L01 Y L21 LINK :http://consumer.huawei.com/nl-en/support/downloads/index.htm?keyword=HUAWEI%20Y6
FIRMWARE SCC LINK: http://consumer.huawei.com/np/support/products/downloads/detail/y6-np.htm?id=87223
Minimal ADB KIT + TUTORIAL LINK A MEGA:http://shink.in/z6CDy
DESCOMPRESOR UPDATE.APP + TUTORIAL Y6 FIRMWARE EXTRACCIÓN LINK A MEGA:http://http://shink.in/z6CDy
TUTORIAL COMANDO ADB LINK A MEGA: http://shink.in/ZHfwC
XDA:DevDB Information
HUAWE Y6 ADB KIT , Tool/Utility for all devices (see above for details)
Contributors
Andrewp58
Source Code: http://shink.in/z6CDy
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-02-21
Created 2017-02-21
Last Updated 2017-02-23

ROM Lineage OS 11.0 Android 4.4.4 for Cancro

lastest security patch level of 4.4.4 for who want come back 4.4 kitkat at 219
here is link ROM: https://drive.google.com/drive/folders/1VtgNcb85ohul_83ELwSrgCceDN31Je8F?usp=sharing
XDA:DevDB Information
ROM Lineage OS 11.0 Android 4.4.4 for Cancro, ROM for the Xiaomi Mi 3
Contributors
thinhx2
Source Code: https://github.com/mi3-dev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4.4 firmware
Version Information
Status: Stable
Created 2019-05-26
Last Updated 2019-05-26

Thank you for creating this

how to flash it? any instruction? where i can find 4.4.4 firmware? any bugs?

aeolus777 said:
how to flash it? any instruction? where i can find 4.4.4 firmware? any bugs?
Click to expand...
Click to collapse
It included 4.4 fw

So i can ckean flas it even if i have 8.1 android now?

aeolus777 said:
So i can ckean flas it even if i have 8.1 android now?
Click to expand...
Click to collapse
Yes

Hi :v
Rom này hiệu năng thế nào anh (antutu, geekbench)?

After installing on Mi 3 I can't go to recovery mood. Its always sends me to fastboot mood.

Will this work on merged partition?

i can't enter recovery mode. Any help?

I have Mi 4 Lte (2gb + 16 gb)
Did a clean install (full wipe of everything) + latest gapps. I certainly like and miss the look and feel of kitkat (it was my favorite by far). And if would be great with the latest security patch because all the existing kitkat roms are outdated.
However, Mi 4 Lte has no 4g option in settings so no 4g, and I get force close/not responding on Hill climb racing 2. So there are some issues with this rom.

help
how do i install this? this is my first time doing custom roms and i have no idea what to do
edit: i got it working tnx

why?
there is a lot of cusrom with latest android version.... why should revert back to KItKat?

maybe due to good battery ?

I can't start ART?

thinhx2 said:
lastest security patch level of 4.4.4 for who want come back 4.4 kitkat at 219
here is link ROM: https://drive.google.com/drive/folders/1VtgNcb85ohul_83ELwSrgCceDN31Je8F?usp=sharing
XDA:DevDB Information
ROM Lineage OS 11.0 Android 4.4.4 for Cancro, ROM for the Xiaomi Mi 3
Contributors
thinhx2
Source Code: https://github.com/mi3-dev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4.4 firmware
Version Information
Status: Stable
Created 2019-05-26
Last Updated 2019-05-26
Click to expand...
Click to collapse
So did anyone knows how to enter recovery after flashed this rom ?

ArthurTsai said:
So did anyone knows how to enter recovery after flashed this rom ?
Click to expand...
Click to collapse
Edit: after use twrp to flash this rom , install Flashify:
https://www.apkmirror.com/apk/christian-gollner/flashify/
And flash recovery.img via Flashify
After progress done , just click reboot .
Now you are entering CWM-base Recovery.

Thanks to you, now I can play Army of darkness defense finally. Thank you.
https://play.google.com/store/apps/details?id=com.backflipstudios.android.aodd

Mveux l'essayer dans un téléphone itel 1403+
même je cherche une custom pour le mettre en 5.1

ROM RedHydrogen One

I need the ROM of the RedHydrogen One, please, can someone help me?
Necesito la ROM del RedHydrogen One, por favor, alguien me ayuda ?

Downloads for : Red Hydrogen One | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com

jwoegerbauer said:
Downloads for : Red Hydrogen One | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Muchas gracias.
Pero cuando intento flashear me dice "permission denied"
Ayuda por favor!