Hi
I'm tired of people spamming the threads of the roms complaining/requesting about Viper, Firmware, SuperSU Magisk and yellow flash in the Camera App, So I'm posting this thread with all the resources.
All these firmware, Camera App with white flash as well as Viper works with all Lineage 14.1 based roms as well as AOSP roms. I've tried and tested them with Lineage OS 14.1, Viper OS rom, AEX and Cypher OS. And Yes, Viper4Android works even in roms in which SELinux is set to Enforcing.
Package contains:
1) September Firmware for MIDO
2) MIUI Camera App which clicks photos with White Flash. Note : Torch will still use Yellow Flashlight, but who cares about that? No other camera app can use white flash as the process/code which needs to use white flash is there only in MIUI Camera App and No one knows what that is.
3) Viper 4 Android (Works with latest AOSP and Lineage Roms even if SELinux is set to enforcing in the Roms)
4) Magisk 14.0 (Recommended for AOSP based Roms and not for Lineage OS; If you want to pass Safety net successfully, then use Magisk 14 and not SuperSU)
5) SuperSU 2.82 (With Lineage Roms use Official SU on Lineage OS Site)
6) Lineage SU 14.1 (For Lineage 14.1 or Lineage based roms ; After Flashing from Recovery, go to developer options to enable root for Apps)
Installation :
1) UnRAR files first. Then flash whatever ZIP File you want to install from custom recovery (TWRP or equivalent) only.
Downloads :
http://www60.zippyshare.com/v/kbUaMGJA/file.html
OR
http://www.filedropper.com/rn4files
File Size : 77 MB (Approx)
Credits:
Not to me. I haven't developed any of the above mentioned stuff. I'm just compiling stuff.
1) Xiaomi.eu for Firmware
2) MIUI Camera App with White Flash - https://forum.xda-developers.com/re...era-nougat-t3670993/post73741600#post73741600
3) Viper4Android - http://4pda.ru/forum/lofiversion/index.php?t405989-0.html
4) Magisk 14 - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
5) SuperSU 2.82 - http://www.supersu.com/download
6) Lineage OS SU - https://download.lineageos.org/extras
With regards;
Could you please tell me which dolby atmos should i use?? Also provide me the link.
ayush.gl said:
Could you please tell me which dolby atmos should i use?? Also provide me the link.
Click to expand...
Click to collapse
Sorry, I don't use Dolby.
ayush.gl said:
Could you please tell me which dolby atmos should i use?? Also provide me the link.
Click to expand...
Click to collapse
http://bfy.tw/EMCH
Related
what are the working modules that are working currently for stock pie
You can check the compatibility of every single module in magisk. I just installed YouTube vanced, viper4android, Dolby Atmos and gcam patch.
Excuse me Sir Wich version of Dolby atmos is working on Pie? I can't find one that works ?
djzero86 said:
Excuse me Sir Wich version of Dolby atmos is working on Pie? I can't find one that works
Click to expand...
Click to collapse
1. Flash the Dolby unity light zip for magisk
https://forum.xda-developers.com/android/software/mm-p-dolby-digital-plus-arise-20181115-t3868192
2. Reboot
3. Download and install viper4android 3.3 from magisk repo
4. Reboot
5. Download and install audio modification library from magisk repo
6. Reboot
Thanks for the quick guide ?? ... I will test it
This is Dolby Digial Plus, not Atmos. there is no Atmos module working at the time being for Xiaomi devices running under Pie.
Hi everybody,
I'm looking for a good ROM as daily use for my Z17s (NX595J), but I can't find one with all features working ... The most important one for me is fingerprint unlock. With most of GSI ROM it doesn't work. The problems that I encounter also is Pixel launcher not working with LineageOS based ROMS.
What I used so far :
Havoc-OS-v2.0-20181018-GSI-ARM64-Aonly-Gapps-Official.img.xz
Havoc-OS-v2 6-20190604-vvBuild-phhgsi arm64 a
ResurrectionRemix system-190406-arm64-aonly-vanilla-nosu.img
Can you guys post what you use (kernel, band, vendor, system img) and if you're satisfied ? Thanks !!
After trying many ROMS, kernels and ****, this is the best setup for Android 9.0 I found for my NX595J :
Recovery : TWRP 3.2.3-3 by NFound (https://forum.xda-developers.com/nubia-z17/development/twrp-t3834149)
Radio : Stock (NX595J_Z69_EN_VNG0N_V112)
Kernel : 4.4.78-perf+ (from vendor below)
Vendor : Project-Treble-NX595J-v1.5-OREO-PIE.zip (https://forum.xda-developers.com/nubia-z17/development/nx595j-t3837433)
System GSI : LineageOS 16.0-20190609 (https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029)
Gapps : use Pico (open_gapps-arm64-9.0-pico-20190605.zip) because when I use stock Gapps, Pixel Launcher doesn't work (I always get the message saying the application stopped working on any LineageOs based ROM when using stock gapps... if you install Pixel Launcher after flashing Pico Gapps, it's working, don't ask me why)
Misc : Full Screen Gesture APK because you don't have any navigation bar on LineageOS 16.
link : https://play.google.com/store/apps/details?id=com.agooday.fullscreengestures&hl=en_US or : https://apkpure.com/full-screen-gestures/com.agooday.fullscreengestures
Battery life is not AMAZING but is by far the longest one I had on Android 9.0 with this phone with GSI roms : 40% left after 14 hours without charge (1h06 min of screen use, and pretty bad reception during the whole day, google location activated and no optimization made at all). Fingerprint unlock is working perfectly. Didn't try MTP.
ROMs I tried : Havoc, Lineage, Mokee 90, Liquid, Omni Pie, Resurrection Remix
what about camera?
spctoma said:
After trying many ROMS, kernels and ****, this is the best setup for Android 9.0 I found for my NX595J :
Recovery : TWRP 3.2.3-3 by NFound (https://forum.xda-developers.com/nubia-z17/development/twrp-t3834149)
Radio : Stock (NX595J_Z69_EN_VNG0N_V112)
Kernel : 4.4.78-perf+ (from vendor below)
Vendor : Project-Treble-NX595J-v1.5-OREO-PIE.zip (https://forum.xda-developers.com/nubia-z17/development/nx595j-t3837433)
System GSI : LineageOS 16.0-20190609 (https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029)
Gapps : use Pico (open_gapps-arm64-9.0-pico-20190605.zip) because when I use stock Gapps, Pixel Launcher doesn't work (I always get the message saying the application stopped working on any LineageOs based ROM when using stock gapps... if you install Pixel Launcher after flashing Pico Gapps, it's working, don't ask me why)
Misc : Full Screen Gesture APK because you don't have any navigation bar on LineageOS 16.
link : https://play.google.com/store/apps/details?id=com.agooday.fullscreengestures&hl=en_US or : https://apkpure.com/full-screen-gestures/com.agooday.fullscreengestures
Battery life is not AMAZING but is by far the longest one I had on Android 9.0 with this phone with GSI roms : 40% left after 14 hours without charge (1h06 min of screen use, and pretty bad reception during the whole day, google location activated and no optimization made at all). Fingerprint unlock is working perfectly. Didn't try MTP.
ROMs I tried : Havoc, Lineage, Mokee 90, Liquid, Omni Pie, Resurrection Remix
Click to expand...
Click to collapse
does it support google cam or stock nubia camera? these are important for me.
gogar said:
does it support google cam or stock nubia camera? these are important for me.
Click to expand...
Click to collapse
I'm testing the same setup with the recent update of LOS 16 at the moment.
Which gcam Mod works here?
All I tested so far have problems with front camera(force close when taking picture).
Brother I have recently installed Lineage OS 17.1.
But now I can't root my phone.I have tried Magisk Root, SuperSU root and also Kingroot.But this device is not rooted. And I have no pc.
Can anyone solve how to root my Lineage OS 17.1 on Samsung Galaxy J500H?
Ask on the applicable thread. There is no need to open a new question about a ROM that is already posted.
You need to also give more info about how you tried to install and what exactly did you do.
A proper but report is needed to troubleshoot
Md Nafis Muhtadi said:
Brother I have recently installed Lineage OS 17.1.
But now I can't root my phone.I have tried Magisk Root, SuperSU root and also Kingroot.But this device is not rooted. And I have no pc.
Can anyone solve how to root my Lineage OS 17.1 on Samsung Galaxy J500H?
Click to expand...
Click to collapse
Flash latest magisk.zip via twrp
It should be latest bc you have installed latest Android!
Super su or kingoroot or any sh*it apps like that was maded for KitKat to noghat, not even pie or oreo
Only way is to flash latest magisk
Version 20.4 is preferred
addon su
There is too an official addon to root LOS 17.1 or ?
You can flash it in TWRP like magisk.
rbnyellow said:
There is too an official addon to root LOS 17.1 or ?
You can flash it in TWRP like magisk.
Click to expand...
Click to collapse
Just flash latest magisk via twrp
It's the most safe way
Also olny way
Is FaceUnlock connected to what version of Gapps you use? Or is FaceUnlock built into the ROM itself?
If it is connected to the ROM itself has anyone made a flashable module you can add to implement the feature to any ROM?
If it is connected to Gapps please recommend a Gapps that has FaceUnlock. I currently have tried FlameGapps and OpenGapps Nano which both of these packages didn't add it.
1- No.
2- Yes.
3- That's not possible because it's not a simple apk, some changes are needed in various parts of the system to make it work.
As far as I know, it is removed in android 10 so you wont find it in stock android and pixel phones. If you want to use it, you need to pick rom that supports it, for example oos based on android 10, rr, paranoid, treskmod (using right now, very cool rom). It is not possible to get it work in rom that doesnt support it (nor with xposed, magisk, apk, gapps, nothing).
What I mean is are there any sounds mods like Dolby Atmos or Viper4Android that can be just flashed from recovery?
I really don't want to use Magisk or root with other services.
I'm using LineageOS 17 with Orange Fox recovery.