Related
help guyzz
a must hv for me
not wrking on note 3
plzz help guyzzz
vishalgupta said:
help guyzz
a must hv for me
not wrking on note 3
plzz help guyzzz
Click to expand...
Click to collapse
What we can do is send logs to the developer so that they can fix it... enable debug on the app, set a block number, call from the block number and sent it.
Sent from [email protected] Ass Note III SM-N9005
iznee said:
What we can do is send logs to the developer so that they can fix it... enable debug on the app, set a block number, call from the block number and sent it.
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
They have enough logs now & they didn't tell them anything. They need to actually look into someone's phone via remote adb.
vishalgupta said:
help guyzz
a must hv for me
not wrking on note 3
plzz help guyzzz
Click to expand...
Click to collapse
what baseband who use? i have call master and it works
Root call blocker now working after latest update.
Sent from [email protected] Ass Note III SM-N9005
Still not working after updating to 2.3.1.10....
vishalgupta said:
Still not working after updating to 2.3.1.10....
Click to expand...
Click to collapse
Also in my N9005 not working today i rooted with de la vega method and call master is not working to my phone
For me it s working
Envoyé depuis mon SM-N9005 avec Tapatalk
note 3 kitkat
not working for me as well. anyone?
Hello,
Anyone have a working method for this model ?
Baseband version: G7105XXUANB8
Build number : JLS36C.G7105XXUANB8
pilou360 said:
Hello,
Anyone have a working method for this model ?
Baseband version: G7105XXUANB8
Build number : JLS36C.G7105XXUANB8
Click to expand...
Click to collapse
You could try CF root.. might work
It doesn't work for me...
i try this : CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5
But the flash fail
pilou360 said:
It doesn't work for me...
i try this : CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5
But the flash fail
Click to expand...
Click to collapse
pilou360, gtn7105 = Galaxy Note II 4G GT-N7105. I made the same mistake.
I can't find the CF-Auto-Root tool for the SM-G7105. It's consistent with the SM-G7102 only.
If anyone can make one, I'm interested as well as a CMW or a TWRP recovery.
pilou360 said:
Hello,
Anyone have a working method for this model ?
Baseband version: G7105XXUANB8
Build number : JLS36C.G7105XXUANB8
Click to expand...
Click to collapse
+1
Enviado desde mi JY-G3 mediante Tapatalk
ZackaruS said:
pilou360, gtn7105 = Galaxy Note II 4G GT-N7105. I made the same mistake.
I can't find the CF-Auto-Root tool for the SM-G7105. It's consistent with the SM-G7102 only.
If anyone can make one, I'm interested as well as a CMW or a TWRP recovery.
Click to expand...
Click to collapse
+1
Still no root? - bump-
+1 ?
Envoyé de mon GT-P3110 en utilisant Tapatalk
Nothing? I'll Keep waiting, u're the best!
Enviado desde mi JY-G3
Hi i'm a neewbie on xda,
i wanna know if the CF ROOT of sm-g7102 will work on my g7105 ? i'm confuse about that !!
daweili said:
Hi i'm a neewbie on xda,
i wanna know if the CF ROOT of sm-g7102 will work on my g7105 ? i'm confuse about that !!
Click to expand...
Click to collapse
Check your device model, Go To Setting > About and Make sure that it is SM-G7102.
Do-not try it on Galaxy Grand 2 SM-G7105.
joker1977 said:
Check your device model, Go To Setting > About and Make sure that it is SM-G7102.
Do-not try it on Galaxy Grand 2 SM-G7105.
Click to expand...
Click to collapse
Thx mate ! i checked twice abt my device mobile, its a SM-G7105, by the way, do u know if there are a root software's for the SM-G7105 ?
daweili said:
Thx mate ! i checked twice abt my device mobile, its a SM-G7105, by the way, do u know if there are a root software's for the SM-G7105 ?
Click to expand...
Click to collapse
Not yet. We waited impatiently
joker1977 said:
Not yet. We waited impatiently
Click to expand...
Click to collapse
SO am I !!!! i can't wait to root my phone :laugh:
Request made to Chainfire on central topic 8 days ago, with attached recovery.zip.
Still no news about it.
:crying:
vne256 said:
Request made to Chainfire on central topic 8 days ago, with attached recovery.zip.
Still no news about it.
:crying:
Click to expand...
Click to collapse
Thx vne256, maybe chainfire is working on it, wait and see.
Even if we get the cf root... how to unlock bootloader?
daweili said:
Thx vne256, maybe chainfire is working on it, wait and see.
Click to expand...
Click to collapse
Some news for root?
Enviado desde mi SM-G7105 mediante Tapatalk
future said:
Some news for root?
Click to expand...
Click to collapse
No news.
Just sent PM to Chainfire. I don't know if I should insist on central thread.
vne256 said:
No news.
Just sent PM to Chainfire. I don't know if I should insist on central thread.
Click to expand...
Click to collapse
i sent too a PM, try to insist on central thread.
MX5 how to change 5.1.1.1A to international?
for, example, you can make change system app from 5.1.1.1I (if it is)
The Flyme 5 International version's still under testing. We'll release it very soon. Thanks 4 ur watching.
Shen_Lin said:
The Flyme 5 International version's still under testing. We'll release it very soon. Thanks 4 ur watching.
Click to expand...
Click to collapse
Can u tell me the exact time when it is released?
ledinhbac said:
Can u tell me the exact time when it is released?
Click to expand...
Click to collapse
Sure, I'll let you know as soon as it is ready.
Shen_Lin said:
Sure, I'll let you know as soon as it is ready.
Click to expand...
Click to collapse
Do you work in meizu or something like that [emoji15] ?
iicc said:
Do you work in meizu or something like that [emoji15] ?
Click to expand...
Click to collapse
Yes, I work in Meizu and contribute to Flyme Project.
BTW, maybe the firmware you want is here: http://www.flymeos.com/firmwarelist?modelId=2&type=1
Shen_Lin said:
Yes, I work in Meizu and contribute to Flyme Project.
BTW, maybe the firmware you want is here: http://www.flymeos.com/firmwarelist?modelId=2&type=1
Click to expand...
Click to collapse
That is nice!
Enviado desde mi MX5 mediante Tapatalk
Shen_Lin said:
Yes, I work in Meizu and contribute to Flyme Project.
BTW, maybe the firmware you want is here: http://www.flymeos.com/firmwarelist?modelId=2&type=1
Click to expand...
Click to collapse
hello can we explain what it takes to switch from Flyme 5.1.2.0A firmware for Flyme OS 5.1.2.0G?
best regards
Shen_Lin said:
Yes, I work in Meizu and contribute to Flyme Project.
BTW, maybe the firmware you want is here: http://www.flymeos.com/firmwarelist?modelId=2&type=1
Click to expand...
Click to collapse
if y work in meizu whats the problem in whatsapp, etc etc notifications
what we should do to this work??
its I version better than A version for this?
thanks
DiogoSepultura said:
hello can we explain what it takes to switch from Flyme 5.1.2.0A firmware for Flyme OS 5.1.2.0G?
best regards
Click to expand...
Click to collapse
I wan't to know also (I'm on PRO5).
thx
tekri said:
I wan't to know also (I'm on PRO5).
thx
Click to expand...
Click to collapse
https://meizufans.eu/forum/topic/25...irmware-on-your-chinese-mainland-meizu?page=1
I hope it helps : D
DiogoSepultura said:
https://meizufans.eu/forum/topic/25...irmware-on-your-chinese-mainland-meizu?page=1
I hope it helps : D
Click to expand...
Click to collapse
Yes helps, thank you very much
Hey some times when I turn off the screen or itself get off then the button lights are white and the screen won't respond . . Trying to press the button to open the phone but don't work.. the phone is on nougat 7.0 . To fix this I must wait until can open it .. it's lag .. thanks
S7 edge global stock kernel non rooted stock rom
G935f
What variant, what kernel, stock or custom ROM?
dynospectrum said:
What variant, what kernel, stock or custom ROM?
Click to expand...
Click to collapse
S7 edge global stock kernel non rooted stock rom
G935f
Well.. when I turn off the screen then the button lights open. And the screen won't respond.. I have to wait almost 30 secs until open again the screen .. What I am supposed to do for this issue?
StonebridgeGr said:
Well.. when I turn off the screen then the button lights open. And the screen won't respond.. I have to wait almost 30 secs until open again the screen .. What I am supposed to do for this issue?
Click to expand...
Click to collapse
Did you update your phone recently?
nickxofficial said:
Did you update your phone recently?
Click to expand...
Click to collapse
No . It's on the latest version long time ago.. why?
Can someone please help me?
StonebridgeGr said:
Can someone please help me?
Click to expand...
Click to collapse
Do factory reset everything will be deleted from phone
efkka23 said:
Do factory reset everything will be deleted from phone
Click to expand...
Click to collapse
I did this. Nothing changed
How old yuor phone?
efkka23 said:
How old yuor phone?
Click to expand...
Click to collapse
3 months
Are you using Greenify?
Enviado de meu SM-G935F usando Tapatalk
vicentinii said:
Are you using Greenify?
Enviado de meu SM-G935F usando Tapatalk
Click to expand...
Click to collapse
Yes I will try to delete it and see if anything change
StonebridgeGr said:
Yes I will try to delete it and see if anything change
Click to expand...
Click to collapse
You found the problem!
Greenify do this! Its not a problem, the Black screen is the greenify hibernating all apps open..
Enviado de meu SM-G935F usando Tapatalk
vicentinii said:
You found the problem!
Greenify do this! Its not a problem, the Black screen is the greenify hibernating all apps open..
Enviado de meu SM-G935F usando Tapatalk
Click to expand...
Click to collapse
No I didn't find it. You find it. Hahaha thanks
StonebridgeGr said:
No I didn't find it. You find it. Hahaha thanks
Click to expand...
Click to collapse
Glad to help you! [emoji2]
StonebridgeGr said:
3 months
Click to expand...
Click to collapse
So bring back him s7 are very fast and cant do tricks like yuors
efkka23 said:
So bring back him s7 are very fast and cant do tricks like yuors
Click to expand...
Click to collapse
I don't understand what you are saying .....
Tavo telefonas sudo gabalas convert from lithuania to english
efkka23 said:
Tavo telefonas sudo gabalas convert from lithuania to english
Click to expand...
Click to collapse
Well you speak english. You can translate your self. I don't know Lithuanian and I don't think on this forum you can speak another language from English . Especially when the other guys talking in English . Btw i did translate but I don't know what is sudo
Hello guys.
This is a personal purpose, to change the splash logo with whatever you want to .
I let you some examples in the attached files.
You can ask me for do your personal logo with the image you love.
Feel free to ask me for that.
If you use it for your new project rom, I'll agree to be mencioned.
Installation instructions:
Copy the zip in the main memory and flash with TWRP.
If you see a red message at the end of the process, ignore it.
Reboot.
Voilà.
Enjoy !
ENIAC
Reserved
Many thanks. Could you please add the stock one without unlocked watermark.
Thanks in advance, really appreciate your work!
Sent from my MI 9 using Tapatalk
mrnannu said:
Many thanks. Could you please add the stock one without unlocked watermark.
Thanks in advance, really appreciate your work!
Sent from my MI 9 using Tapatalk
Click to expand...
Click to collapse
Here you have it.
Enjoy.
ENIAC
ea3aitjr said:
Here you have it.
Enjoy.
ENIAC
Click to expand...
Click to collapse
Thank you so much [emoji3]
Sent from my MI 9 using Tapatalk
Hello, can you make one with a skull?
DonMark said:
Hello, can you make one with a skull?
Click to expand...
Click to collapse
Of course. I'll do it tonight.
DonMark said:
Hello, can you make one with a skull?
Click to expand...
Click to collapse
Here I let you two Skulls logo, White, or Blue.
Hope you like them.
Cheers!
ENIAC
Could you provide a tutorial on how to make such customs splash logos?
I would be really grateful
Great job!!
Could you please do this one for me? Thanks
YuriBasescu said:
Great job!!
Could you please do this one for me? Thanks
Click to expand...
Click to collapse
Yes..
Hope you like it.
Cheers!
ENIAC
Splash logo for Ironman
Would you kindly help do splash logo for ironman ?
Appreciate if it comes true.
Good day mate! Can you please do this one, thanks a lot
This one as well, if you dont mind
Kris Chen said:
Would you kindly help do splash logo for ironman ?
Appreciate if it comes true.
Click to expand...
Click to collapse
Ok. Great,
Look if the size is correct for you.
If you want it smaller or bigger, please tell me (more or less) which percent for it.
Cheers.
ENIAC
aizn_void said:
Good day mate! Can you please do this one, thanks a lot
Click to expand...
Click to collapse
Good for you. !
Cheers
ENIAC
ea3aitjr said:
Good for you. !
Cheers
ENIAC
Click to expand...
Click to collapse
Thanks!
Thank you so much !!!
After trying 3 files, they're perfect !!
Thank you so much for your great work !!
Kris
ea3aitjr said:
Ok. Great,
Look if the size is correct for you.
If you want it smaller or bigger, please tell me (more or less) which percent for it.
Cheers.
ENIAC
Click to expand...
Click to collapse
aizn_void said:
This one as well, if you dont mind
Click to expand...
Click to collapse
I named it "Halo".
Cheers !
ENIAC
ea3aitjr said:
I named it "Halo".
Cheers !
ENIAC
Click to expand...
Click to collapse
Cool guy! Thanks bud