Database Users

[Q] Stuck after an Official Update

Hello everyone.
I just bought a Nexus 7 version 2012 with the original stock ROM Android 4.2.1
And before applying the root / install a recovery or anything else, I decided ( Big mistake from me ) to update the firmware with the official version Jellybean 4.3 with the official method ( Parameter > Update firmware to Android 4.3 )
The Nexus reboot on bootloader and start the update, but after 30 secondes, install failed and I got a message called " Error" on the middle of the screen with the Android logo down.
Now, I'm stuck on bootloop on the " X " logo after "Google".
I tried the Full wipe but nothing changed because it doesn't affect the Bugged Firmware.
Apparently the solution will be to download something else with USB cable on ADB Sideload. But my USB debugging isn't enable...
I'm stuck with the official version and got no root, no revovery, nothing... just an official bug.
If someone have any solution I will be very grateful... Or should I have to send it to Asus with the Warranty ?
Thank you very much.

I think you just can flash factory images from bootloader and you good to go

martikung said:
I think you just can flash factory images from bootloader and you good to go
Click to expand...
Click to collapse
Problem solved, I restored it with Nexus Root Toolkit after unlock the bootloader and Flash Stock in Current status Soft-Bricked mode.
Thank you.

[OTA] Moto G 2014 XT1064 v22.21.25.en.us (5.0.1)

I just got the new OTA for Lolipop 5.0.1. I used ADB to pull the URL for the download and downloaded the attached ZIP using my browser. The URL pulled from ADB was an extremely long randomized string of characters that expired the moment my device was done updating. It seems the link is only active during the update process, so the only way to leave the link active longer is to battery pull or something in the middle of the update. I love you guys... but not that much
Keep in mind that this OTA was offered to me on 22.21.16, so I am assuming that you probably need to be on that update before you can use this OTA.
Let me know if you guys have any questions or run into any issues!

I'm rooted and running TWRP on my XT1064 with 22.21.16. Is there a way to just fastboot flash this update? I don't mind losing root. Thanks!

Okay, I had upgraded to 22.21.16 via TWRP using KennyWuLee's packaged tool. This morning I received a notice that I had an update available for 22.21.25. So like a dummy I went ahead and accepted. Now all it does is boot into TWRP. When I restart to system from TWRP it boots up just fine then after about 15 seconds reboots to TWRP.
I assume it is looking for the stock recovery which will then allow me to install the update? So will I be safe to go ahead and reflash the stock recovery, reboot and go from there? Or should I go all the way back to stock everything?
I have an XT1063.
Edit: I went ahead and flashed stock recovery and rebooted. After boot looping several times it rebooted into the system and gave me the message "Software update unsuccessful. There was a problem ....blah, blah, blah." But I still show an update available when I check.
I suspect it is because I am unlocked and rooted, even though I have stock recovery installed. Any thoughts on this guys? I am going to hold fast until I know for sure.

The update failed because you were rooted. You need a 100% stock /system since updates after 5.0 check the integrity of the filesystem before updating.

I may sound like a noob, but just to be sure..
Name of update says ".en.us".
Is it ok to use it for a french moto G 2d generation?
French will be available?
Thanks!!

DoubleIk said:
I may sound like a noob, but just to be sure..
Name of update says ".en.us".
Is it ok to use it for a french moto G 2d generation?
French will be available?
Thanks!!
Click to expand...
Click to collapse
Not sure if it makes a difference or not. I just put what the build was listed as when I got the update notification.
I put that there in case that was why some people couldn't update from 22.21.6 to 22.21.16

shishir95 said:
The update failed because you were rooted. You need a 100% stock /system since updates after 5.0 check the integrity of the filesystem before updating.
Click to expand...
Click to collapse
Nice theory, but I am now totally restored back to stock with stock recovery and unrooted. Still no luck with the update. Same thing happens.

I'm still stuck on 22.11.6, so I'm assuming I can't install this update until I'm on 22.21.16?

thisisjason said:
I'm still stuck on 22.11.6, so I'm assuming I can't install this update until I'm on 22.21.16?
Click to expand...
Click to collapse
From what I've seen, that is correct.

Any news XT1068 android 5.0.1 #India?

Moto G 2014 5.0.1
Hello good day friends will have some manual to perform the installation ?? and try it for apply update from ADB and I mark error in sideload package , installation aborted

How do I can install this update?

Took update to Nougat, but phone is still on 6.0.1

Enrolled in the beta program and allowed it to download and install the 1.1gb Nougat file.
After reboot, still shows 6.0.1.
Any ideas on what happened, or more importantly, what to do to get to 7.0?
Thanks!

You 100% stock?

xxBrun0xx said:
You 100% stock?
Click to expand...
Click to collapse
Yep, no root, no recovery, nothing.

I'm having same problem
after I got OTA and update to 7.0 Still It showing 6.0 so I opt out beta program and soon as I got downgrade to 6.0 message I opt-in again
and I download OTA and install one more time.
now I got bootloop. device is completely stock. no unlock oem or usb debug or root. so when I'm trying to flash factory image.
it keep showing " FAILED (remote: device is locked. Cannot erase)"
so I can't fastboot flash or adb
I don't know what to do.

OK, I ended up downloading and sideloading it. Shows 7.0 now.

I had that problem too. previously using stock MM, no rooted etc. after downloading the N by joining the developer program, it downloaded but after reboot still showed 6.0.1 but with August security update. it also said that i have the latest software version.
a couple hours later, software update notification popped up again and after re-download it shows the 7.0

wililye said:
I'm having same problem
after I got OTA and update to 7.0 Still It showing 6.0 so I opt out beta program and soon as I got downgrade to 6.0 message I opt-in again
and I download OTA and install one more time.
now I got bootloop. device is completely stock. no unlock oem or usb debug or root. so when I'm trying to flash factory image.
it keep showing " FAILED (remote: device is locked. Cannot erase)"
so I can't fastboot flash or adb
I don't know what to do.
Click to expand...
Click to collapse
That's identical to my situation. Will see what Google say when I ring them.

[Guide] Safely unlock bootloader on official MM

UPDATE: This is now unneeded because threr is a faster way ro unlock bootloader on official MM here, he updated for official MM
Hi, I discovered an unlock method for official MM!! This maybe long but's it totally safe
You need:
Adb and fastboot environment ready PC
LP RAW File
Android 6.0 Beta Unlock tool
Android 5.0 One-Click Unlock tool
First version of beta MM (Z00A) (Z008)
Official MM zip (find it on Asus site)
Thanks to all people upload these links
Just do the following:
Flash the lastest LP via AFT (using raw file given above), wipe all data. If you already on MM, you have to downgrade
Unlock your bootloader using 1 click tool given above
Boot to stock recovery and sideload the first version of beta MM
Unlock the bootloader using MM beta unlock tool above
Boot to stock recovery
Two case here:
Case 1: You can't boot stock recovery
Normally boot your phone (to Android)
Setup it as a new phone
If it shows there is a new firmware, don't update!!!
Enable Developer options, then enable usb debugging
Copy the official MM zip to external sd card
Open command prompt, run adb reboot recovery, accept the adb permission if prompted
After it boots to recovery, select Apply update from SD, then choose the zip file you've copied before
Wait for it to update, it may stuck at flashing splashcreen, don't worry, it's trolling you, may be Asus forgot to update the script
Goto step 7
Case 2: You can boot stock recovery
Sideload the official MM zip (adb sideload <filename>.zip)
Goto step 7
7. Flash this TWRP (fastboot flash recovery <twrp>.img)
8. Root your phone using this method
9. Reboot, if it shows "Your phone has failed verification bla bla..", then you've success. It may reset loop like note 7 in the first time start, don't worry.
9. Enjoy :highfive:
Note: If you're facing with battery problems on MM, factory reset it in Settings > Backup and Reset > Factory Reset > Erase everything
Successfully on my ZE550ML
The warning screen is normal so don't worry and there is no way to fix it for now

Reverse

Reverse #2

Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app

NiTesh said:
Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, BL will be relocked once you upgrade to MM.
If you want to unlock MM BL(6.0), refer to this thread.
Or you can downgrade to Lollipop referring to this thread. Then your BL(5.0) is unlocked.

Upgrade to MM
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa

R3D SoX F4N said:
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa
Click to expand...
Click to collapse
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery

can anyone please upload official recovery for Zenfone 2 ZE551ML, currenty i have twrp installed on Android version 5.0 LP Stock

HungNgocPhat said:
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery
Click to expand...
Click to collapse
i have twrp recovery at the moment cause i followed mr_gouvad2000 tuturial..
what do you sugest?
flash WW_ZE551ML_2.20.40.196_20160815.raw?
WW_ZE551ML_2.20.40.194_20160713.raw?
and then go and do what you told?
cheers

hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english

tridet18 said:
hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english
Click to expand...
Click to collapse
someone correct me if i am worng but....
https://www.asus.com/Phone/ZenFone_2_ZE551ML/HelpDesk_Download/
Look for this version WW-4.21.40.134

Hello, thank you but this version is official, i need de first beta 6.0
R3D SoX F4N said:
someone correct me if i am worng but....
Look for this version WW-4.21.40.134
Click to expand...
Click to collapse

that version...i can´t find it anywere..maybe someone here knows were to find it?

Updated the first MM beta link in OP

hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?

tridet18 said:
hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?
Click to expand...
Click to collapse
Have you downloaded the correct build? There are build for MM bootloader, if you flash the normal builds, it will fail and reboot to recovery again. Gapps is the same for all builds
After you install that special build, do not update to newer nightlies, it will fail. For updates, check the link i give you and see if there is a new MMBL build.
About that, here is the post: http://forum.xda-developers.com/showpost.php?p=68542370&postcount=8551

hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!

tridet18 said:
hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!
Click to expand...
Click to collapse
Run the script again (i gave you in above post). Download the CM13 in that link, not in the OP of CM13 thread. Flash that CM13 and Gapps (Gapps is universal for MMBL and LPBL).
May be you have corrupt download, I'm currently running CM13 on MMBL

Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .

hlp
tridet18 said:
Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .
Click to expand...
Click to collapse
how u unlocked bootloader

Lost TWRP after update C100B303 to C100B307 and cannot install again

I had a Media Pad M3 with unlocked bootloader, rooted and TWRP as recovery. As I wanted to update my ROM to BTV-DL09C100B311 I had some problems in TWRP an thought updating step by step would be a good idea. So I downloaded all missing ROMs throught FrimwareFinder and startet with BTV-DL09C100B307_fullOTA.
The installation in TWRP with ADP sideload worked and when I restartet my device a was a bit suprised that the yellow "Bootloader is unlocked - your device is unsecure" message was missing. I restarted again and the message is still missing. I thought OK perhaps I can now install all updates through the EMUI build in process without FirmwareFinder or TWRP.
EMUI downloaded the update and asked me to restart and install. After the restart the install process went to 20% and told me then there was a verification error. When I restarted the tablet again I got a screen similar to the yellow "Bootloader is unlocked - your device is unsecure". The screen is red an told me "Your device has failed verification an may not work properly".
Now I'm stuck. No updates work and TWRP could not be started or installed again.
I tried reinstall TWRP with fasboot (https://forum.xda-developers.com/mediapad-m3/development/twrp-greatslon-mod-t3489232) but I get the error FAILED (remote: "command not allowed"). I tried the newest TWRP mod from https://androidfilehost.com/?w=files&flid=125388 but same error.
Phone and FRP are still unlocked, as shown in FASTBOOT&RESCUE MODE so this is not the cause of the above mentioned fastboot error.
I installed the Android SDK completly and downloaded the newest toolkit (https://developer.android.com/studio/releases/platform-tools) but still get the above error. So I dont think its a driver problem either.
I did not try to unlock the bootloader again. I don't think this makes sense even if I still have the original codes.
I would like to get TWRP back and update the tablet to the newest ROM version. And it would also be nice to know what happened here
Thanks in advance for everyone helping me back on track. I think the first step should be get over the FAILED (remote: "command not allowed") error and install TWRP again.

I got it
Needed to unlock the bootloader again. Even so it throws an error the red starting screen disappeared an I got the usual yellow one back and i could install TWRP.
//Edit
Managed to get to newest Version with this updater: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279

sebbo2015 said:
I got it
Needed to unlock the bootloader again. Even so it throws an error the red starting screen disappeared an I got the usual yellow one back and i could install TWRP.
//Edit
Managed to get to newest Version with this updater: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
I am also looking for a way to update my rooted M3 (WiFi edition) to the latest available version with security patch line of November.
Now I wonder whether with this updater in your post above this works immediately or if I also have to go through all the difficulties you faced?
Is it possible to install updates with a rooted device with this updater or do you always need to unlock the bootloader again?
Thanks for your help!

Just tried it out now and it worked! Data is still there, homescreen icons are a little bit messed up and root is gone (no problem).
This is great because I was looking now for a long time to find a way to update a rooted M3 with new OTA updats (all the usual way fails).
I used to do it with going back to stock and a factory reset being involved.
Funny that you presented me the solution with your problem.
Glad that you shared it.
Now the only thing I am missing is to install the Xposed Framework on the M3. If you know how to do this let me know (I am using Super SU).

Borkse said:
Funny that you presented me the solution with your problem.
Glad that you shared it.
Now the only thing I am missing is to install the Xposed Framework on the M3. If you know how to do this let me know (I am using Super SU).
Click to expand...
Click to collapse
Im happy I could help. I dont use Xposed.

Hi, can you, please, describe this in steps? What I have to do before standard OTA update should work? And when (and how) to open bootloader once more? Thank you very much.

Standard ota updates will not work. If you already have an unlocked bootloader you have to use this method https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 to manual update your M3 to the newest version.
If you have no unlocked bootloader please check this first https://forum.xda-developers.com/mediapad-m3/development/twrp-greatslon-mod-t3489232