Nxt-l29c185b582 ?! - Mate 8 General

Did anyone try Nxt-l29c185b582 from ff and which one to pick full one 1.9 gb or ota 750 mb ??!

I tried 2 but do not accept the update says that the update is unofficial

So ota and full didn't work ?

Hi.
Yes unauthorized package.
This update cannot install.
If you check this firmware with "CHECK FIRMWARE ACCESS" in FF it shows this message "the firmware is not approved for installation.
I don't know why cannot we get faster update on C185.!!

Because we are in the middle East ?

Dany_21 said:
Because we are in the middle East
Click to expand...
Click to collapse
Yes you are right.... They don't even care about our phones....

Huawei is busy with new additions for getting old phones

So if they want to bring new things for mate 8,(Android Oreo):confused I think this is the best time to rebrand our phone from ME to better region such C636.
Because I think we will get andriod Oreo after other regions.

I think we should change our model from C185 to C636

Well please explain the conversion from c185 to c636

Shahin81 said:
Well please explain the conversion from c185 to c636
Click to expand...
Click to collapse
Firstly, have to downgrade firmware to marshmallow (if you are on Nougat currently) then use "SRKToolHuawei" application to rebrand your mate 8 from C185 to C636.
Once you are on C636 then you can update your mate 8 to NXT-L29C636B589.

afromoh said:
Firstly, have to downgrade firmware to marshmallow (if you are on Nougat currently) then use "SRKToolHuawei" application to rebrand your mate 8 from C185 to C636.
Once you are on C636 then you can update your mate 8 to NXT-L29C636B589.
Click to expand...
Click to collapse
I have rebrand my mate from c185 to c636 yesterday and installed this firmware NXT-L29C636B521. after that updated my mate by firmware finder to NXT-L29C636B589.
The ram usage in this version is very good and about battery performance I should check it but a very amazing thing:
" The phone was in standby mode about 7 hours (one sim card) and my charge dropped from 54% to 54% Within these seven hours."

afromoh said:
I have rebrand my mate from c185 to c636 yesterday and installed this firmware NXT-L29C636B521. after that updated my mate by firmware finder to NXT-L29C636B589.
The ram usage in this version is very good and about battery performance I should check it but a very amazing thing:
" The phone was in standby mode about 7 hours (one sim card) and my charge dropped from 54% to 54% Within these seven hours."
Click to expand...
Click to collapse
Thanks...You Flashed Full firmware B589 (1.9GB approx.) on top of B521 or just the update (700 MB) only?

apat26 said:
Thanks...You Flashed Full firmware B589 (1.9GB approx.) on top of B521 or just the update (700 MB) only?
Click to expand...
Click to collapse
Hi. My friend
I flash B521 by twrp then the frimware locked my boot loader automatically. After that I used ff to update frimware by OTA.
Frist, update b521 to b585 then b585 to b589.
I downloaded the fullota-mf and the ota-mf.
As you see there is difference between frimware version, I mean the fullota-mf is 96925 and ota-mf 96926.
TWRP cannot flash this kind of fullota files you have to update by your phone directly.

So anyone actually test c185b582 ? It may better than c636b589 though
Sent from my HUAWEI NXT-L29 using Tapatalk

Not approved for installation yet..

Hi.
about battery performance :
After full charge I used the phone (Internet (wifi), Chatting(wifi), camera, music player, one sim card, calling, standby about 7H) the charge dropped from 100 to 54% in about 22 hours.
again after .

afromoh said:
Hi.
about battery performance :
After full charge I used the phone (Internet (wifi), Chatting(wifi), camera, music player, one sim card, calling, standby about 7H) the charge dropped from 100 to 54% in about 22 hours.
again after .
Click to expand...
Click to collapse
That's about C185B582 right?
I got error (firmware finder 1.9gb one)! Which one did you installed?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HUAWEI NXT-L29 using Tapatalk

He was talking about L29C636B589. As I mentioned above, C185B582 is not approved for installation yet...

amin318 said:
That's about C185B582 right?
I got error (firmware finder 1.9gb one)! Which one did you installed?
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Hi. Yes there is a problem for C185B582 package.
Rebranded my mate 8 then I installed C636B589.

Related

We Need Huawei P8 GRA-UL00 C433 Marshmallow ROM

Hi how to update this rom for Andoid 6
Please help me. TNX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
salam
salam doste aziz chetori Firmware B183 ro nasb kardi? OTA baraye UL00 akharish B180 bud
Hi
I have the same build and I didn't find any update...
regards
Till now there is no marshmallow for c433 build number
There is no 5.1 so there will not be 6.0 i think
iam arabic >>my device P8 UL10 433B180
iam register huawei arabic beta 6.0 on facebooke ^^
now iam on beta 6.0 ota
but in the about phone UL00185B316 )()))
المغذرة لغتي بسيطة
aswertya said:
iam arabic >>my device P8 UL10 433B180
iam register huawei arabic beta 6.0 on facebooke ^^
now iam on beta 6.0 ota
but in the about phone UL00185B316 )()))
المغذرة لغتي بسيطة
Click to expand...
Click to collapse
Is there any way to upload it, share with us )
I don't know why huawei dont focus on asian and african device model she focus and work only for the europeen and american model i have a c433 model and i am stuck on lollipop 5.0.1 but the german people they are on 6.0.1 marshmallow its a shame. I bought the phone 430 dollars but i didn't recive any update thanks.
aswertya said:
iam arabic >>my device p8 ul10 433b180
iam register huawei arabic beta 6.0 on facebooke ^^
now iam on beta 6.0 ota
but in the about phone ul00185b316 )()))
المغذرة لغتي بسيطة
Click to expand...
Click to collapse
السلام عليكم
أخي تقدر ترفع لنا الملف لأن معظم الناس ماوصلها التحديث وأنا منهم
aswertya said:
iam arabic >>my device P8 UL10 433B180
iam register huawei arabic beta 6.0 on facebooke ^^
now iam on beta 6.0 ota
but in the about phone UL00185B316 )()))
المغذرة لغتي بسيطة
Click to expand...
Click to collapse
I think he lost one caracter after UL00
( UL00"""""185B316 )
Huawei P8 Firmawre GRA-UL00
Hosseintr said:
Hi how to update this rom for Andoid 6
Please help me. TNX
Click to expand...
Click to collapse
You can find it here
Huawei P8 Firmawre (GRA-L03, EMUI4.0, Android6.0, GRA-UL00, C185B320)
Code:
consumer.huawei.com/eg-en/support/downloads/detail/index.htm?id=79323
midoam2003 said:
You can find it here
Huawei P8 Firmawre (GRA-L03, EMUI4.0, Android6.0, GRA-UL00, C185B320)
Code:
consumer.huawei.com/eg-en/support/downloads/detail/index.htm?id=79323
Click to expand...
Click to collapse
has anybody installed this version on C433?
As far as I know, it is impossible to install firmware that has different carrier number from your device's carrier number, which in this case C185 can not be uploaded on C433 device.
Am running it on my previously C433B180, africa and middle east run the same ware
I'm confirm- work great on my gra-ul 10! Previously version was c433b180 ..you just have to do local update, not force
i can confirm that work
mine was C433B180 became C185B320 just use Local update ..... I am happy Now ..
lleha776 said:
mine was C433B180 became C185B320 just use Local update ..... I am happy Now ..
Click to expand...
Click to collapse
Update filed ican update by c185b320
Hosseintr said:
Update filed ican update by c185b320
Click to expand...
Click to collapse
Mine was C433B180 became C185B320. Unzip the package and follow the PDF guide attached. You will succeed. It will erase everything so do a back up before you update.
niyazib said:
Mine was C433B180 became C185B320. Unzip the package and follow the PDF guide attached. You will succeed. It will erase everything so do a back up before you update.
Click to expand...
Click to collapse
İcan updated now filed to update .
Psychonerd62 said:
I don't know why huawei dont focus on asian and african device model she focus and work only for the europeen and american model i have a c433 model and i am stuck on lollipop 5.0.1 but the german people they are on 6.0.1 marshmallow its a shame. I bought the phone 430 dollars but i didn't recive any update thanks.
Click to expand...
Click to collapse
No they don't, Huawei quickly halted the update because it was buggy.
lleha776 said:
mine was C433B180 became C185B320 just use Local update ..... I am happy Now ..
Click to expand...
Click to collapse
Are you in GRA-UL01? How bout you guys in GRA-UL00, does the file work?

[REQUEST] Need Middle East(Pakistan Region/ALE-L21C185b160) OEMINFO File

I basically flashed @sokkoban Deodexed b564 ROM, by changing location, it was working fine, but i reverted to B160 ROM, after transition pack, i first installed Pakistan Factory image i.e B120, and i recieved OTA update of B130 and later B160,
I also changed region,everything is working fine,no balong bug etc, but OEMINFO file of pakistan is currupted, as no IMEI and no working WIFI and Bluetooth, icons grey out, i researched, and somehow manage to get my Signals back by following @sokkoban Post. link is here
http://forum.xda-developers.com/p8lite/general/mod-automatic-change-location-region-t3388657
but no WIFI and bluetooth working, did more research and finally find out that OEMINFO which is mentioned in sokkoban post was basically for HONOR 4C, which corrupted my basic baseband, so i need OEMINFO file of any of below ROM, i.e B120,B130 or B160.
If any one have, please share it with me, thanks
important: B564 and european ROMs working fine, as European location files shared by Sokkoban is exactly made for P8 lite, but
Pakistan location - hw/meafnaf
is of Honor 4C.
just search for your new beta 6.0 rom for middle east i wrote a link in another post
ale-l21c185b524
just copy the file to your phone and update just 1 click (local update)
@Nadeemroid i think 524 is a european marshmallow version. B525 is pakstani version. Will you confirm it for u. Also tell me. If i flash that one. Will i be able to flash b160 wiyhout any problem
Will you provide me that link here. As i search alot but unable to find
@saifkhan9187
i've tested by myself its a beta for middle east dualsim ... c185b524 6.0
h**p:// docs.google.com/uc?id=0B_wHFR4i-b7UR3BZbWFtdXl3MG8&export=download
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and this is screenshot too from my device and its running normally
here is all the oeminfo files including your version ( pk )
AmINoS007 said:
here is all the oeminfo files including your version ( pk )
Click to expand...
Click to collapse
Bro, is this that one which you shared with @sokkoban in his thread, because i used that, it was for Honor 4C
AmINoS007 said:
here is all the oeminfo files including your version ( pk )
Click to expand...
Click to collapse
Nadeemroid said:
and this is screenshot too from my device and its running normally
Click to expand...
Click to collapse
Bro can you confirm it from engineering mode, please, *#*#2846579#*#*
is it hw/meafnaf ?? becuase it is for middle east
Thanks
@Nadeemroid sorry bro i searched, n i was wrong, thanks bro
mine vendor info
vendor : hw
country : meafnaf
saifkhan9187 said:
Bro, is this that one which you shared with @sokkoban in his thread, because i used that, it was for Honor 4C
Click to expand...
Click to collapse
yes it is , and no it's not for honor , I used my self on my p8 lite and it's working perfectely , I ve installed UAE , Europe and Chineese version on my device , so I know what Im talking about
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
saifkhan9187 said:
Bro can you confirm it from engineering mode, please, *#*#2846579#*#*
is it hw/meafnaf ?? becuase it is for middle east
Thanks
Click to expand...
Click to collapse
yes , it is hw/meafnaf
saifkhan9187 said:
@Nadeemroid i think 524 is a european marshmallow version. B525 is pakstani version. Will you confirm it for u. Also tell me. If i flash that one. Will i be able to flash b160 wiyhout any problem
Click to expand...
Click to collapse
B524 is for dual sim marshmallow beta version while b525 is for single sim variant..
P. S. If there's a even digit at last then it is double sim variant whereas if the last digit is odd number then it is single sim variant..
E. G. B170 - dual sim, b171 - single...
Sent from my ALE-L21 using XDA-Developers mobile app
anyone can please provide me Middle east OEMINFO file, as it is not included in any ROM, it is basically saved in a partition of cell
amageek said:
B524 is for dual sim marshmallow beta version while b525 is for single sim variant..
P. S. If there's a even digit at last then it is double sim variant whereas if the last digit is odd number then it is single sim variant..
E. G. B170 - dual sim, b171 - single...
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
My phone is with dual SIM and b525 android 6.0
Sent from my ALE-L21 using Tapatalk
tarek zag said:
My phone is with dual SIM and b525 android 6.0
Sent from my ALE-L21 using Tapatalk
Click to expand...
Click to collapse
Strange.. I searched about that amd yes it is for dual sim... But everyother roms with odd number at last is for single sim.. Well in any case, you're right man...
Sent from my ALE-L21 using XDA-Developers mobile app
Can any one Provide me OEM info or cust/hw/meafnaf for Pakistan ALE L21????

What is Custom Version CUST C900D151

Check The Attached Image Its Showing About Section Last - Custom Version CUST C900D151. Why This Showing, Let Me Yours About Screen Shot Please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tshohel7 said:
Check The Attached Image Its Showing About Section Last - Custom Version CUST C900D151. Why This Showing, Let Me Yours About Screen Shot Please.
Click to expand...
Click to collapse
Do you still need this info?
I have no idea why yours says CUSTC900D151 in that area - mine doesn't have this 'Custom version' text at all (please view thumbnail).
Which country is the phone from & is it branded to any particular network operator?
What does it display in ProjectMenu [to access: dial *#*# 2846579#*#*] > Network Information Query > Vendor Country Info:
Vendor: ??
Country: ??
GaT7 said:
Do you still need this info?
I have no idea why yours says CUSTC900D151 in that area - mine doesn't have this 'Custom version' text at all (please view thumbnail).
Which country is the phone from & is it branded to any particular network operator?
What does it display in ProjectMenu [to access: dial *#*# 2846579#*#*] > Network Information Query > Vendor Country Info:
Vendor: ??
Country: ??
Click to expand...
Click to collapse
After Updating To B380 Custom Version is not Showing Anymore, Vendor - hw & Country - Normal. How You update to B382 Please let me know the process, I have downloaded the B382 OTA. Thanks
Ok, looks like the update to B380 may have changed your original ROM to a European one(?).
Anyway, I don't think you can update properly from B380 to B382.
You need to downgrade to B370, then update to B382 next - this is the only thing that seems to be working for some of us.
Mine was via OTA though, so I cannot guarantee you will have the same result if you manually update by flashing the file that tap007 provided.
GaT7 said:
Ok, looks like the update to B380 may have changed your original ROM to a European one(?).
Anyway, I don't think you can update properly from B380 to B382.
You need to downgrade to B370, then update to B382 next - this is the only thing that seems to be working for some of us.
Mine was via OTA though, so I cannot guarantee you will have the same result if you manually update by flashing the file that tap007 provided.
Click to expand...
Click to collapse
Okay Then I will wait for the Full Version of B382, Full Version Can Flash Via Dialer Method.
GaT7 said:
Ok, looks like the update to B380 may have changed your original ROM to a European one(?).
Anyway, I don't think you can update properly from B380 to B382.
You need to downgrade to B370, then update to B382 next - this is the only thing that seems to be working for some of us.
Mine was via OTA though, so I cannot guarantee you will have the same result if you manually update by flashing the file that tap007 provided.
Click to expand...
Click to collapse
I have p8 no brand, firmware b380 why I Can't update from b380 to b382?
Fabrizio004 said:
I have p8 no brand, firmware b380 why I Can't update from b380 to b382?
Click to expand...
Click to collapse
Most likely because B380 is a leaked, unofficial version.
Fabrizio004 said:
I have p8 no brand, firmware b380 why I Can't update from b380 to b382?
Click to expand...
Click to collapse
if I update directly from b380 to b382 manually brick my device?
tshohel7 said:
Check The Attached Image Its Showing About Section Last - Custom Version CUST C900D151. Why This Showing, Let Me Yours About Screen Shot Please.
Click to expand...
Click to collapse
Whats Wrong With My Phone (GRA-UL00) ? !!!
1ted55 said:
Whats Wrong With My Phone (GRA-UL00) ? !!!
Click to expand...
Click to collapse
That usually happens if you (or the previous owner) has updated the firmware without prior network-debranding.

Looks like NEM-L51 got official Nougat

I keep checking Firmware Finder to find out when Nougat releases for NEM-L21 and found the following.
OTA-MF:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v82967/f1/full/update.zip
FullOTA-MF:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v82961/f1/full/update.zip
FullOTA-MF-PV:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v82938/f1/full/update.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ye i whish nem-L21 was soon ready too... i thought that 5c was one of most popular phones around europe because of awesome price - quality.... good thing that b132 doesnt have too many bugs but still theres few: when i press square it doesnt always show apps it just shows clear icon and kinda laggs and goes to home and then i need press again to see apps there....
but how do i update, i am on firmware 130 version, when i extract it to the dload folder and try the update it says incompatible rom version from there i only can reboot - is it possible to force the upadate or update it via pc
Werdolf said:
but how do i update, i am on firmware 130 version, when i extract it to the dload folder and try the update it says incompatible rom version from there i only can reboot - is it possible to force the upadate or update it via pc
Click to expand...
Click to collapse
Doesn't OTA work?
jpelli said:
Doesn't OTA work?
Click to expand...
Click to collapse
it says no update available - maybe later
Just checked firmware finder and yay, your right.
I'm on l51C432. Which B350 download do I go for?
The FULLOTA-MF(1.6gb) which has 3 zip files or the FULLOTA-MF-PV(2.0gb) which has 2 zip files???
What are the differences. I've started downloading the b350 fullota-mf-pv, simply because it's a bigger download. Can anyone let me know if I am downloading the right one asap. Thanks all :fingers-crossed:
Doesn't work....
iantechie1979 said:
Just checked firmware finder and yay, your right.
I'm on l51C432. Which B350 download do I go for?
The FULLOTA-MF(1.6gb) which has 3 zip files or the FULLOTA-MF-PV(2.0gb) which has 2 zip files???
What are the differences. I've started downloading the b350 fullota-mf-pv, simply because it's a bigger download. Can anyone let me know if I am downloading the right one asap. Thanks all :fingers-crossed:
Click to expand...
Click to collapse
I tried with the FULLOTA-MF-PV but it doesn't work :crying:... It start to update but said that it's an invalide package version... I will try with the FULLOTA-MF ...
i wouldnt start randomly flashing ota packages thru unofficial firmware finder.... wait till official OTA comes avaible to avoid any issues (usually flashing non official ota causes glitches)
I've always do that before without any issues...
Sent from my NEM-L51 using XDA-Developers Legacy app
---------- Post added at 01:30 PM ---------- Previous post was at 01:17 PM ----------
Does not work with FULLOTA-MF neither... That's so bad
I've tried with "proxy method" in firmware finder and it works !!!
Update success
I installed the FullOTA-MF-PV and got nougat (EMUI 5.0)
I noticed perfomance improvements and better RAM management.
The only issue I found is that Nova Launcher keeps crashing when I try to set it up. Nova launcher was working fine when I was on Emui 4 but not Emui 5. When I open nova launcher it crashes after 1 minute and goes back to default launcher.
Cool. But which one did you use with proxy method? -mf or -mf-pv ???
i think the size is wrong at the FullOTA-MF-PV download.. or am i wrong ? i downloaded all 3 updates.zip but 2 of them are same size... FullOTA-MF & FullOTA-MF-PV are the same size... maybe thats the problem ?
iantechie1979 said:
Cool. But which one did you use with proxy method? -mf or -mf-pv ???
Click to expand...
Click to collapse
According on Huawei Firmware Finder App Q&A section :
MF stands for Multi-File ROM, which by itself means that this package contains more than a single update file. This is the type of package used for EMUI 5.
PV stand for Point-Version ROM and is used to update the Android version. In our case, from 6.0 to 7.0.
Conclusion : you need the FULL-OTA-MF-PV update file. Or so I think. Installing this at the moment, I'll come back to you when I'm done and tell you what's up.
The FullOTA-MF-PV shows up as a 2.0 GB download in the list. Im currently downloading and its actually 1.3GB.
Is that normal?
Hello, updates B350 and B351 availabe for NEM-L21C432 now .Going to download, 10 days ago I updated from B130 to B132 and its horibble. Phone is very slow and fingerprint has slower reactions .
FirstMn said:
Hello, updates B350 and B351 availabe for NEM-L21C432 now .Going to download, 10 days ago I updated from B130 to B132 and its horibble. Phone is very slow and fingerprint has slower reactions .
Click to expand...
Click to collapse
omg youre right, firmware finder finds emui5+android N for NEM-L21!!
you find with FF.
I have install B351 with proxy method, dload is not working
zzhunt said:
you find with FF.
I have install B351 with proxy method, dload is not working
Click to expand...
Click to collapse
How can I do this "proxy method"? Can you help me?
https://www.youtube.com/watch?v=nSy0uVDOJXo
---------- Post added at 05:43 PM ---------- Previous post was at 05:41 PM ----------
update success
http://postimg.org/image/43o9dblo7/

Nougat Information from huawei hong kong customer service

I got email from Hong Kong Huawei customer service, that Huawei mediapad M3 noutgat has been released and Is this true if we need to upgrade official hong kong huawei mediapad m3 via OTA we need Hong kong simcard? Because i tried many time to check the update on my mediapad m3 but still no nougat, i'm not live in Hong Kong that why i cannot get Hong Kong simcard
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my BTV-DL09 using Tapatalk
Thank you for the info.
However, OTA shouldn't be the only option. We want a full ROM and the wait has been long enough now...
Many people criticize Apple but at least, they do release updates regularly so that 1) security breaches are closed and 2) their customers can enjoy their old products with new software features quite regularly with noticeable look'n feel and performance improvements.
When I will have to replace my tablet... I know what I will do.
Finally i got OTA Update suddenly after i put simcard on my huawei mediapad m3
Sent from my BTV-DL09 using Tapatalk
willows said:
Finally i got OTA Update suddenly after i put simcard on my huawei mediapad m3View attachment 4214063
Sent from my BTV-DL09 using Tapatalk
Click to expand...
Click to collapse
Have you gotten an official OTA or have you used Firmware Finder? If it was official, which region are you from?
MarkMRL said:
Have you gotten an official OTA or have you used Firmware Finder? If it was official, which region are you from?
Click to expand...
Click to collapse
I got official OTA, my Huawei mediapad m3 is Hong Kong version and have LTE, I live at Indonesia. Before I cannot get OTA update maybe because I set airplane mode, after I put Hong Kong simcard suddenly notification show OTA update.
Sent from my Nexus 9 using Tapatalk
I succeed to update my huawei m3 8.4 to Nougat 7.0 and EMUI 5.0 (Hong Kong version) :
download the zip file at:
update.hicloud.com:8180/TDS/data/files/p3/s15/G1224/g490/v93016/f1/full/hw/spcseas/update_data_full_hw_spcseas.zip
unzip it into a folder 'dload'
Then copy this 'dload' folder into your SD Card.
Turn off the device.
Before turn on again, hold 'Volume+' pressed and press the 'ON' button until the update process start.
Enjoy
ps: the Hong Kong Huawei customer service was totally NOT professional and totally USELESS in this process.
Huawei device are beautifully designed but the security software update is a real pain in the ass.
Next time, I will not buy Huawei any device again !
Thanks.
It worked like a charm for me. Thank you so much Paolomangiare for your help !!!!
paolomangiare said:
I succeed to update my huawei m3 8.4 to Nougat 7.0 and EMUI 5.0 (Hong Kong version) :
download the zip file at:
update.hicloud.com:8180/TDS/data/files/p3/s15/G1224/g490/v93016/f1/full/hw/spcseas/update_data_full_hw_spcseas.zip
unzip it into a folder 'dload'
Then copy this 'dload' folder into your SD Card.
Turn off the device.
Before turn on again, hold 'Volume+' pressed and press the 'ON' button until the update process start.
Enjoy
ps: the Hong Kong Huawei customer service was totally NOT professional and totally USELESS in this process.
Huawei device are beautifully designed but the security software update is a real pain in the ass.
Next time, I will not buy Huawei any device again !
Click to expand...
Click to collapse
*** download the zip file at:
update.hicloud.com:8180/TDS/data/files/p3/s15/G1224/g490/v93016/f1/full/hw/spcseas/update_data_full_hw_spcseas.zip ***
Does anyone know if the US Wifi version BTV-W09 (on Nougat) can flash this in such manner to regain the 5 GHz Wifi capability?
Thanks.

Categories

Resources