This is the latest firmware for HTC ONE M7 extracted from official OTA OTA_M7_UL_K44_SENSE60_MR_HTC_Europe_5.11.401.10-4.19.401.11_release_372404wj19h95c0x6oa19n.zip
You need unlocked bootloader and S-OFF
Removed Red Warning Text and flashed successfully on my phone.
This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.
The zip contain:
- firmware 5.11.401.10
- hboot 1.57.0000
- radio 4T.27.3218.14
Flash only if you have firmware v4.xx (download v4 from here) and hboot 1.56.000 not older or you'll get a bricked phone!!!
Download file and copy to your adb folder:
Download links in post 133
DON'T REBOOT THE PHONE UNTIL YOU GET A SUCCESS MESSAGE
1 - Reboot bootloader
Code:
adb reboot bootloader
2 - Reboot to RUU
Code:
fastboot oem rebootRUU
3 - Flash firmware
Code:
fastboot flash zip firmware_name.zip
Very important!!! One more time (press up arrow on your PC keyboard then press ENTER)
Code:
fastboot flash zip firmware_name.zip
4 - Reboot to bootloader and verify version
Code:
fastboot reboot-bootloader
5 - Reboot to system
Code:
fastboot reboot
6 - Enjoy
WARNING
Flash at your own risk, I can't be held responsible if you didn't follow all steps and brick the phone!!!
Stock unmodified firmware
MD5 3b7b13b52f75ed516c888b827710f29a
Zip contain stock kernel and recovery!!!
If your phone get bricked because you didn't follow the guide or flashed over a v3.xx firmware, go to HTC Unbricking Project thanx @dexter93
Only for M7_UL:
modelid: PN0710000
cidnum: HTC__001
cidnum: HTC__Y13
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__304
cidnum: HTC__A07
cidnum: HTC__032
cidnum: HTC__J15
cidnum: HTC__016
TeHashX said:
If case you need original firmware for:
modelid: PN0711000
modelid: PN0713000
modelid: PN0712000
modelid: PN0714000
modelid: PN0710000
modelid: PN071****
cidnum: HTC__***
cidnum: CWS__001
cidnum: H3G__***
cidnum: O2___***
cidnum: ORANG***
cidnum: TELNZ001
cidnum: OPTUS001
cidnum: T-MOB***
cidnum: TELST001
cidnum: VODAP***
cidnum: BM___001
cidnum: BS_US***
cidnum: GLOBA001
cidnum: ROGER001
cidnum: TELUS001
cidnum: TIM__***
The zip contain:
- firmware 5.11.1540.9
- hboot 1.57.0000
- radio 4T.27.3218.14
- the new splash screen "powered by android"
- stock boot
- stock recovery
http://goo.gl/V3yzDF
MD5 ef0cc76134c170e4230804ca1c9edf02
Click to expand...
Click to collapse
Dear friend:
Could you tell me if this firmware supports M7_UL with SuperCID????
This is the ORIGINAL format the "SD"???
Thank you very much and excuse my English
Yes, you can flash with super cid and will not format sdcard but always is better to save contents.
Thank you sir, everything went nice here m7ul supercid.
Is it cool to use this firmware on ViperOne 6.2.1? I know its not using the latest base. Shouldn't hurt though, right?
So I'm on AT&T with s-off and super CID. Can I flash this?
DrRyder said:
Is it cool to use this firmware on ViperOne 6.2.1? I know its not using the latest base. Shouldn't hurt though, right?
Click to expand...
Click to collapse
Yes
aceroller said:
So I'm on AT&T with s-off and super CID. Can I flash this?
Click to expand...
Click to collapse
TeHashX said:
Yes
Click to expand...
Click to collapse
Awesome. Thanks. Flashing here in a minute.
THX for firmware :highfive:
all set all done with no problem
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1540.9
(bootloader) version-misc: PVT SHIP S-OFF
I I flash this firmware and after:
c:\HTC>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.047s]
finished. total time: 0.047s
c:\HTC>fastboot flash zip firmware_5.11.1540.9_noredwarn.
target reported max download size of 1514139648 bytes
sending 'zip' (24706 KB)...
OKAY [ 1.981s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image a
finished. total time: 3.604s
c:\HTC>fastboot flash zip firmware_5.11.1540.9_noredwarn.
target reported max download size of 1514139648 bytes
sending 'zip' (24706 KB)...
OKAY [ 2.044s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,26
(bootloader) [RUU]UZ,sp1,50
(bootloader) [RUU]UZ,sp1,75
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,57
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 13.915s]
finished. total time: 15.959s
c:\HTC>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.031s]
finished. total time: 0.031s
After that my phone won't boot up, black screen and nothing more :crying: no red light after plug charger...
working fine here
many thanks :good:
Just finished flashing mine. I think now it's as good as brick. It won't come up after step 4. When connecting the charger - no light. Here is all the output I got:
Code:
C:\adb>adb reboot-bootloader
C:\adb>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.106s]
finished. total time: 0.110s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.082s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 4.335s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.078s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,26
(bootloader) [RUU]UZ,sp1,50
(bootloader) [RUU]UZ,sp1,75
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,57
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 15.458s]
finished. total time: 17.544s
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.106s]
finished. total time: 0.109s
C:\adb>
Any ideas? Of course I had S-OFF...
simaka said:
Just finished flashing mine. I think now it's as good as brick. It won't come up after step 4. When connecting the charger - no light. Here is all the output I got:
Code:
C:\adb>adb reboot-bootloader
C:\adb>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.106s]
finished. total time: 0.110s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.082s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 4.335s
C:\adb>fastboot flash zip firmware_5.11.1540.9_noredwarn.zip
sending 'zip' (24706 KB)...
OKAY [ 2.078s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,26
(bootloader) [RUU]UZ,sp1,50
(bootloader) [RUU]UZ,sp1,75
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,57
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,98
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]UZ,rcdata,42949671
(bootloader) [RUU]WP,rcdata,0
(bootloader) [RUU]WP,rcdata,42949671
(bootloader) ...... Successful
OKAY [ 15.458s]
finished. total time: 17.544s
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.106s]
finished. total time: 0.109s
C:\adb>
Any ideas? Of course I had S-OFF...
Click to expand...
Click to collapse
I have the same i also had S-off and unlocked bootloader.
Now my phone is recognized as QHSUSB_DLOAD on Win7
alien44 said:
I have the same i also had S-off and unlocked bootloader.
Now my phone is recognized as QHSUSB_DLOAD on Win7
Click to expand...
Click to collapse
I think most likely both of us didn't have superCID. I am not sure whether I set it or not after set-off (it was a while ago)... No way to check it now ....
OP, why didn't you specificially input in your thread that superCID is required for this update? It makes sense, of course, but you should have put this there...
My phone is also bricked now damn..
Super CID is definitely NOT required, I successfully flashed this firmware and no super CID
Flashed on International M7, didn't brick.
simaka said:
I think most likely both of us didn't have superCID. I am not sure whether I set it or not after set-off (it was a while ago)... No way to check it now ....
OP, why didn't you specificially input in your thread that superCID is required for this update? It makes sense, of course, but you should have put this there...
Click to expand...
Click to collapse
I had super CID, S-OFF, Unlocker bootloader. What now?
Worked
Worked fine here, I did have Super-CID though....
hi guys. i have moto x style dualsim XT1572 variant. attempting to unlock its bootloader to further install twrp and custom roms. upon performing the get_unlock_data step i m getting error. i have already enable oem unlocking and usb debugging in developer option. dont know whats wrong ..... one thing i noticed that "Device is Engineering" is mentioned in bootloader details. can i install/flash TWRP without bootloader unlocking ?
Try this https://forum.xda-developers.com/mo...l-windroid-universal-android-toolkit-t3206883
aakashverma0007 said:
Try this https://forum.xda-developers.com/mo...l-windroid-universal-android-toolkit-t3206883
Click to expand...
Click to collapse
not working. the tool booted into bootloader without any issue. upon clicking get unlock key the tool start working and then suddenly an error appears and it crashes.
mkhurram0023 said:
hi guys. i have moto x style dualsim XT1572 variant. attempting to unlock its bootloader to further install twrp and custom roms. upon performing the get_unlock_data step i m getting error. i have already enable oem unlocking and usb debugging in developer option. dont know whats wrong ..... one thing i noticed that "Device is Engineering" is mentioned in bootloader details. can i install/flash TWRP without bootloader unlocking ?
Click to expand...
Click to collapse
So you enter
Code:
fastboot oem get_unlock_data
And you are getting an error? Can you screenshot the error (clearly) or copy and paste the terminal session?
Going to be honest, unless you are doing something incorrectly, there is little we can do... Motorola does have an official forum area for bootloader unlock issues on their support site, although it is a tough to get a response sometimes but this whole mechanism is pretty well locked down to the point that unless it's user error there isn't much we can do.
i am getting below things when i enter "fastboot oem get_unlock_data"
c:\adb>fastboot oem get_unlock_data
. . .
(bootloader) Failed to get unlock data, please try again !
FAILED (remote failure)
finished. total time : 0.013s
c:\adb>
i m unable to post screenshots as i m new use on this forum.
mkhurram0023 said:
i am getting below things when i enter "fastboot oem get_unlock_data"
c:\adb>fastboot oem get_unlock_data
. . .
(bootloader) Failed to get unlock data, please try again !
FAILED (remote failure)
finished. total time : 0.013s
c:\adb>
i m unable to post screenshots as i m new use on this forum.
Click to expand...
Click to collapse
That's fine... Can you copy and paste output of
fastboot getvar all
And mask out your IMEI number (but verify its there), please.
C:\adb>fastboot devices
NX7C3A0096 fastboot
C:\adb>fastboot oem get_unlock_data
...
(bootloader) Failed to get unlock data, please try again!
FAILED (remote failure)
finished. total time: 0.010s
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.4C
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: no
(bootloader) hwrev: 0x82A0
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=01 TYPE=57 PNM=BGND3R
(bootloader) ram[0]: 3072MB Micron S8 SDRAM DIE=6Gb M5=x3 M6=x0 M7=x0 M8
(bootloader) ram[1]: =x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: NX7C3A0096
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0xDEAD
(bootloader) uid: 5C2725001E000000000000000000
(bootloader) unlocked: Not supported
(bootloader) securestate: Engineering
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 1
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue May 2 12:18:43 UTC 2017"
(bootloader) ro.build.fingerprint[0]: motorola/clark_retla_ds/clark_ds:6
(bootloader) ro.build.fingerprint[1]: .0/MPHS24.49-18-8/4:user/release-k
(bootloader) ro.build.fingerprint[2]: eys
(bootloader) ro.build.version.full[0]: Blur_Version.24.221.8.clark_retla
(bootloader) ro.build.version.full[1]: _ds.retla.en.01
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband[0]: M8992_1255331.29.01.88.02p CLARK_LATAM
(bootloader) version-baseband[1]: _DSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.10.84-perf-g2c916d9 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x-goo
(bootloader) kernel.version[2]: gle 20140827 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Fri Sep 23 04:52:36 CDT 2016
(bootloader) sbl1.git: git=MBM-NG-VA0.4C-0-g07bb07e
(bootloader) rpm.git: git=90a41be
(bootloader) tz.git: git=5fa1c0c-dirty
(bootloader) hyp.git: git=5fa1c0c-dirty
(bootloader) sdi.git: git=52a3f93
(bootloader) pmic.git: git=MBM-NG-VA0.4C-0-g07bb07e
(bootloader) aboot.git: git=MBM-NG-VA0.4C-0-g1fa1c30
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (75)
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.235s
C:\adb>
mkhurram0023 said:
(bootloader) unlocked: Not supported
(bootloader) securestate: Engineering
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 1 <-- This is the "Bootloader State"
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
Click to expand...
Click to collapse
Here is your problem in bold above... You device has been reflashed by engineering (ie. Motorola repair/support) and not placed back into a production state, it is in Engineering mode. There is nothing you can do, you should contact Motorola support. We have seen this in the Moto G much more than the X, but it definitely happens sometimes. Most of the time customer service won't know what you are talking about and you will have to go to the Lenovo forums, post about it and wait for a Moto support engineer to respond.
The Bootloader State (mot_sst) should be 0, 2, or 3... never 1... 0 means LOCKED, 2 means RELOCKED (was unlocked, but relocked with 'oem lock' procedure), and 3 means UNLOCKED. A value of 1 means Engineering, and that should never be seen in a production device.
Also, that bootloader date and sku looks messed up (unless you masked that as well), I don't recall seeing other engineering state devices with that. There are some other weird parameters that make me think this device has had problems before too, but they are not as important as what I noted above.
There is nothing you can do, you need to either leave it as is... assuming it is operating normally, or contact Motorola/Lenovo to correct the issue.
EDIT: See this thread for more information: https://forums.lenovo.com/t5/MOTORO...g-and-Unlocked-bootloader-status/td-p/3420219
hey,
I am a noob when it comes to rooting devices and I kinda ****ed up on my 2 year old device.
When I try to start my device, I get this error:
Start up failed:
Your device didnt start up successfully. Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Volume key pressed
USB connected
cmd: getvar:slot-count
cmd: getvar:slot-suffixes
cmd: getvar:slot-suffixes(note: yes, 2 times)
cmd: getvar:has-slot:recovery
cmd: getvar: partition-type:recovery
cmd: getvar:max-download-size
cmd: download:009ff000
cmd: flash:recovery
Error: failed to load kernel!
Boot up failed
my problem is, that no matter how I try to start or factory reset my phone, I sooner or later land on that screen. I can use fastboot commands just fine, but I dont know which I need to use. TWRP cant be started, because I need to press "Recovery Mode" at one point which sends me back to the above error.
I am stuck since half a day and I honestly cant figure it out myself. I hope you can help me to root my phone. many thanks,
Termii
Edit 1: trying the following commands:
C:\Users\Desktop\reboot\platform-tools>fastboot devices
ZY2245QMTN fastboot
C:\Users\Desktop\reboot\platform-tools>fastboot erase recovery
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
erasing 'recovery'...
(bootloader) Permission denied
FAILED (remote failure)
finished. total time: 0.007s
C:\Users\Desktop\reboot\platform-tools>fastboot flash recovery recovery.img (note: recovery = TWRP 3.1.1-0 Moto G5S Plus [sanders])
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (10236 KB)...
OKAY [ 0.284s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.231s]
finished. total time: 0.519s
C:\Users\Desktop\reboot\platform-tools>fastboot reboot
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
rebooting...
finished. total time: 0.007s
the error my moto shows me:
Start up failed:
Your device didnt start up successfully. Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Error: failed to load kernel!
Fastboot Reason: Fall-through from recovery boot mode USB connected
Edit 2:
C:\Users\Desktop\reboot\platform-tools>fastboot getvar all
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.8A(*)
(bootloader) product: potter
(bootloader) board: potter
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 3
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY2245QMTN
(bootloader) cid: 0x0032
(bootloader) channelid: 0x40
(bootloader) uid: 24F61D6D00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from recovery boot mode
(bootloader) imei: ********
(bootloader) meid:
(bootloader) date: 05-16-2017
(bootloader) sku: XT1685
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Jun 14 3:14:15 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/potter_n/potter_n:7.0/NPN
(bootloader) ro.build.fingerprint[1]: S25.137-33-11/11:user/release-keys
(bootloader) poweroffalarm: 1
(bootloader) ro.build.version.full[0]: Blur_Version.25.226.11.potter.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.5.6.r1-01900-89xx.0
(bootloader) version-baseband: M8953_02.03.07.06R POTTER_EMEADSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.31-perf-g64ca40a-0012
(bootloader) kernel.version[1]: 8-g77c6b6b ([email protected]) (gcc ve
(bootloader) kernel.version[2]: rsion 4.9 20150123 (prerelease) (GCC) )
(bootloader) kernel.version[3]: #1 SMP PREEMPT Tue Aug 8 08:37:28 CDT 20
(bootloader) kernel.version[4]: 17
(bootloader) sbl1.git: git=MBM-NG-VC0.8A-0-gc33529e
(bootloader) rpm.git: git=MBM-NG-VC0.C0-1-g202d600
(bootloader) tz.git: git=6c4172f-dirty
(bootloader) devcfg.git: git=6c4172f-dirty
(bootloader) keymaster.git: git=6c4172f-dirty
(bootloader) cmnlib.git: git=6c4172f-dirty
(bootloader) cmnlib64.git: git=6c4172f-dirty
(bootloader) prov.git: git=6c4172f-dirty
(bootloader) aboot.git: git=MBM-NG-VC0.8A-0-gc90d6a9-dirty
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: reteu
all: listed above
finished. total time: 0.177s
solution
it seems I got my phone fixed with this guide: https://forum.xda-developers.com/g5...romfactory-t3691396/post74221633#post74221633
termii10 said:
it seems I got my phone fixed with this guide: https://forum.xda-developers.com/g5...romfactory-t3691396/post74221633#post74221633
Click to expand...
Click to collapse
You might want to edit out your IMEI from the post.
thanks. what is it for btw?
termii10 said:
thanks. what is it for btw?
Click to expand...
Click to collapse
It uniquely IDs a mobile phone, used by carriers to identify stolen devices and disconnect them from the network. If someone else gets a hold of it, they could use it for their illegal device rendering your phone unusable.
termii10 said:
it seems I got my phone fixed with this guide: https://forum.xda-developers.com/g5...romfactory-t3691396/post74221633#post74221633
Click to expand...
Click to collapse
This worked for me as well.
Failed to load Kernel.
Hi dear team,
here's my situation,
When phone is just starting appears a N/A symbol, after that I receive "Start up failed: Your device didnt start up successfully. Use the Software Repair ... etc" message, as well I get the "failed to load kernel". and "fastboot reason fall-through from charger boot mode" message on red letters.
I tried to do the flash stock rom(factory image) via fastboot but when process finish and I reboot phone, still happens the same, I selected the correct stock rom according to my phone model. Phone has bootloader unlocked.
Idk what else I can do. I really appreciate if you can give me a hand.
Greetings
Tropicalvibes said:
Hi dear team,
here's my situation,
When phone is just starting appears a N/A symbol, after that I receive "Start up failed: Your device didnt start up successfully. Use the Software Repair ... etc" message, as well I get the "failed to load kernel". and "fastboot reason fall-through from charger boot mode" message on red letters.
I tried to do the flash stock rom(factory image) via fastboot but when process finish and I reboot phone, still happens the same, I selected the correct stock rom according to my phone model. Phone has bootloader unlocked.
Idk what else I can do. I really appreciate if you can give me a hand.
Greetings
Click to expand...
Click to collapse
I suggest you to use lenovo moto smart assistant app to flash the device, as it will flash your device for you.
riyan65 said:
I suggest you to use lenovo moto smart assistant app to flash the device, as it will flash your device for you.
Click to expand...
Click to collapse
thanks for your answer, I did it already, it does not work cuz it cannot get enough information from the phone.
Tropicalvibes said:
Failed to load Kernel.
Hi dear team,
here's my situation,
When phone is just starting appears a N/A symbol, after that I receive "Start up failed: Your device didnt start up successfully. Use the Software Repair ... etc" message, as well I get the "failed to load kernel". and "fastboot reason fall-through from charger boot mode" message on red letters.
I tried to do the flash stock rom(factory image) via fastboot but when process finish and I reboot phone, still happens the same, I selected the correct stock rom according to my phone model. Phone has bootloader unlocked.
Idk what else I can do. I really appreciate if you can give me a hand.
Greetings
Click to expand...
Click to collapse
hello, could you solve it?
So i buy a new battery for my dead moto g6+, and encountered with the following problems.
Its a xt1926-6 Evert RETAR
1st: baseband not found, no wifi, and no signal, so i cant pass the google wizard setup
2st: Cant flash a stock firmware/rom cause i didnt have the usb depuration on, and no oem locked (cant turn on beacuse i cant access the phone, like i said in the 1st problem)
Recovery mode works.
Already tried: Flashing stock rom/firmware via ADB, flashing stock rom/firm via SD, bypassing google wizard (also i have the account, but no internet to login), reverse tethering to give the phone internet but didnt work too.
If anyone can give me help, i will aprecciate it, im so frustrated and been fighting with this phone for 4 days.
UPDATE: LMSA gives me two errors first "Failed to match the connected device.
Reconnect device, then try again."
second error: just stays in "wait for matching firmware, don't unplug your device"
(i put my stock folder in the LMSA download folder but just stays like i said
UPDATE 2: i forgot to mention it but when i get to the part of flashing that says "fastboot erase DDR" i got this error back:
>fastboot erase DDR
erasing 'DDR'...
(bootloader) Invalid partition name DDR
FAILED (remote failure)
finished. total time: 0.006s
UPDATE 3: trying to at least repair the wifi to pass the google wizard encountered the following problem doing some tutorial i read in another forum.
>fastboot -w
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type not supported.
erasing 'userdata'...
OKAY [ 0.220s]
erasing 'cache'...
OKAY [ 0.003s]
finished. total time: 0.223s
That means i dont have the system formated?
I dont know what to do anymore guys...
cowb0y said:
So i buy a new battery for my dead moto g6+, and encountered with the following problems.
Its a xt1926-6 Evert RETAR
1st: baseband not found, no wifi, and no signal, so i cant pass the google wizard setup
2st: Cant flash a stock firmware/rom cause i didnt have the usb depuration on, and no oem locked (cant turn on beacuse i cant access the phone, like i said in the 1st problem)
Recovery mode works.
Already tried: Flashing stock rom/firmware via ADB, flashing stock rom/firm via SD, bypassing google wizard (also i have the account, but no internet to login), reverse tethering to give the phone internet but didnt work too.
If anyone can give me help, i will aprecciate it, im so frustrated and been fighting with this phone for 4 days.
Click to expand...
Click to collapse
Try LMSA's Flash Rescue option
Leave phone in fastboot mode.
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Thanks
sd_shadow said:
Try LMSA's Flash Rescue option
Leave phone in fastboot mode.
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Gonna try, i will post the updates as soon as i can!
Update
sd_shadow said:
Try LMSA's Flash Rescue option
Leave phone in fastboot mode.
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
"Failed to match the connected device.
Reconnect device, then try again."
The phone is connected and in fastboot mode.
UPDATE 4
cowb0y said:
So i buy a new battery for my dead moto g6+, and encountered with the following problems.
Its a xt1926-6 Evert RETAR
1st: baseband not found, no wifi, and no signal, so i cant pass the google wizard setup
2st: Cant flash a stock firmware/rom cause i didnt have the usb depuration on, and no oem locked (cant turn on beacuse i cant access the phone, like i said in the 1st problem)
Recovery mode works.
Already tried: Flashing stock rom/firmware via ADB, flashing stock rom/firm via SD, bypassing google wizard (also i have the account, but no internet to login), reverse tethering to give the phone internet but didnt work too.
If anyone can give me help, i will aprecciate it, im so frustrated and been fighting with this phone for 4 days.
UPDATE: LMSA gives me two errors first "Failed to match the connected device.
Reconnect device, then try again."
second error: just stays in "wait for matching firmware, don't unplug your device"
(i put my stock folder in the LMSA download folder but just stays like i said
UPDATE 2: i forgot to mention it but when i get to the part of flashing that says "fastboot erase DDR" i got this error back:
>fastboot erase DDR
erasing 'DDR'...
(bootloader) Invalid partition name DDR
FAILED (remote failure)
finished. total time: 0.006s
UPDATE 3: trying to at least repair the wifi to pass the google wizard encountered the following problem doing some tutorial i read in another forum.
>fastboot -w
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type not supported.
erasing 'userdata'...
OKAY [ 0.220s]
erasing 'cache'...
OKAY [ 0.003s]
finished. total time: 0.223s
That means i dont have the system formated?
I dont know what to do anymore guys...
Click to expand...
Click to collapse
I attach a getvar all for you
>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-evert_retail-8e93af8-200102
(bootloader) product: evert
(bootloader) board: evert
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2 FV=00000000000000A2
(bootloader) ufs: N/A
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: ZY3232R25R
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1a
(bootloader) uid: B6D17C90
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: IHAVEIMEIBUTICENSOREDIT
(bootloader) meid:
(bootloader) date: 12-05-2018
(bootloader) sku: XT1926-6
(bootloader) carrier_sku: XT1926-6
(bootloader) battid: SB18C208
(bootloader) battery-voltage: 4068
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/evert_n/evert_n:9/PPWS29.
(bootloader) ro.build.fingerprint[1]: 116-11-16/5555b:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.361.26.evert.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-05300-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-gf134223-0256
(bootloader) kernel.version[1]: 0-g4e158e0 ([email protected]) (gcc ve
(bootloader) kernel.version[2]: rsion 4.9.x 20150123 (prerelease) (GCC)
(bootloader) kernel.version[3]: ) #1 SMP PREEMPT Thu Jan 2 01:06:09 CST
(bootloader) kernel.version[4]: 2020
(bootloader) git:abl: MBM-3.0-evert_retail-8e93af8-200102
(bootloader) git:xbl: MBM-3.0-evert_retail-b872199-200102
(bootloader) gitmic: MBM-3.0-evert_retail-b872199-200102
(bootloader) git:rpm: MBM-3.0-evert_retail-718b013-200102
(bootloader) git:tz: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:hyp: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:devcfg: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:cmnlib: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:cmnlib64: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:keymaster: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) gitrov: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:storsec: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retar
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.203s
cowb0y said:
So i buy a new battery for my dead moto g6+, and encountered with the following problems.
Its a xt1926-6 Evert RETAR
1st: baseband not found, no wifi, and no signal, so i cant pass the google wizard setup
2st: Cant flash a stock firmware/rom cause i didnt have the usb depuration on, and no oem locked (cant turn on beacuse i cant access the phone, like i said in the 1st problem)
Recovery mode works.
Already tried: Flashing stock rom/firmware via ADB, flashing stock rom/firm via SD, bypassing google wizard (also i have the account, but no internet to login), reverse tethering to give the phone internet but didnt work too.
If anyone can give me help, i will aprecciate it, im so frustrated and been fighting with this phone for 4 days.
UPDATE: LMSA gives me two errors first "Failed to match the connected device.
Reconnect device, then try again."
second error: just stays in "wait for matching firmware, don't unplug your device"
(i put my stock folder in the LMSA download folder but just stays like i said
UPDATE 2: i forgot to mention it but when i get to the part of flashing that says "fastboot erase DDR" i got this error back:
>fastboot erase DDR
erasing 'DDR'...
(bootloader) Invalid partition name DDR
FAILED (remote failure)
finished. total time: 0.006s
UPDATE 3: trying to at least repair the wifi to pass the google wizard encountered the following problem doing some tutorial i read in another forum.
>fastboot -w
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type not supported.
erasing 'userdata'...
OKAY [ 0.220s]
erasing 'cache'...
OKAY [ 0.003s]
finished. total time: 0.223s
That means i dont have the system formated?
I dont know what to do anymore guys...
Click to expand...
Click to collapse
If your phone is currently flashed with the stock rom, the only way to fix bootloader lock would be to enter edl mode. That means hard bricking on purpose ?
reply
mrsiri said:
If your phone is currently flashed with the stock rom, the only way to fix bootloader lock would be to enter edl mode. That means hard bricking on purpose
Click to expand...
Click to collapse
can you explain to me how i can do that? also sorry for not replying on time,i have same internet issues.
Also i need all the help i can get, because my moto g4 is slowly dying, having ghost touchs, etc. i want to use the g6 +
actualization
So i found a nano sim to try on, and the phone didnt read it, its like i didnt put the sim.
Now im desperate, i tried to formate the phone via fastboot, got this message:
PS C:\Users\cowb0y\Desktop\platform-tools> fastboot -w
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type not supported.
erasing 'userdata'...
OKAY [ 0.387s]
erasing 'cache'...
OKAY [ 0.003s]
finished. total time: 0.392s
i noticed that one partition is on raw format.
I dont know what to do anymore.
cowb0y said:
I attach a getvar all for you
>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-evert_retail-8e93af8-200102
(bootloader) product: evert
(bootloader) board: evert
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2 FV=00000000000000A2
(bootloader) ufs: N/A
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: ZY3232R25R
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1a
(bootloader) uid: B6D17C90
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: IHAVEIMEIBUTICENSOREDIT
(bootloader) meid:
(bootloader) date: 12-05-2018
(bootloader) sku: XT1926-6
(bootloader) carrier_sku: XT1926-6
(bootloader) battid: SB18C208
(bootloader) battery-voltage: 4068
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/evert_n/evert_n:9/PPWS29.
(bootloader) ro.build.fingerprint[1]: 116-11-16/5555b:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.361.26.evert.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-05300-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-gf134223-0256
(bootloader) kernel.version[1]: 0-g4e158e0 ([email protected]) (gcc ve
(bootloader) kernel.version[2]: rsion 4.9.x 20150123 (prerelease) (GCC)
(bootloader) kernel.version[3]: ) #1 SMP PREEMPT Thu Jan 2 01:06:09 CST
(bootloader) kernel.version[4]: 2020
(bootloader) git:abl: MBM-3.0-evert_retail-8e93af8-200102
(bootloader) git:xbl: MBM-3.0-evert_retail-b872199-200102
(bootloader) gitmic: MBM-3.0-evert_retail-b872199-200102
(bootloader) git:rpm: MBM-3.0-evert_retail-718b013-200102
(bootloader) git:tz: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:hyp: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:devcfg: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:cmnlib: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:cmnlib64: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:keymaster: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) gitrov: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:storsec: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retar
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.203s
Click to expand...
Click to collapse
If you have access to a Window 7 or XP machine ?
you could try RSD Lite
Are you using this firmware?
https://mirrors.lolinet.com/firmware/moto/evert/official/RETAR/
XT1926-6_EVERT_RETAR_9.0_PPWS29.116-11-23_subsidy-DEFAULT_regulatory-XT1926-6-ARGENTINA_CFC.xml
reply
sd_shadow said:
If you have access to a Window 7 or XP machine ?
you could try RSD Lite
Are you using this firmware?
https://mirrors.lolinet.com/firmware/moto/evert/official/RETAR/
XT1926-6_EVERT_RETAR_9.0_PPWS29.116-11-23_subsidy-DEFAULT_regulatory-XT1926-6-ARGENTINA_CFC.xml
Click to expand...
Click to collapse
i think a got a netbook with w7 to try rsd lite, gonna try in a few hours and post the results.
No, im trying with the 116-11-16 versions https://mirrors.lolinet.com/firmware/moto/evert/official/RETAR/
XT1926-6_EVERT_RETAR_9.0_PPWS29.116-11-16_subsidy-DEFAULT_regulatory-XT1926-6-ARGENTINA_CFC.xml.zip (and the same but from 2019 date)
i will try with the version you handed me.
I give up
sd_shadow said:
If you have access to a Window 7 or XP machine ?
you could try RSD Lite
Are you using this firmware?
https://mirrors.lolinet.com/firmware/moto/evert/official/RETAR/
XT1926-6_EVERT_RETAR_9.0_PPWS29.116-11-23_subsidy-DEFAULT_regulatory-XT1926-6-ARGENTINA_CFC.xml
Click to expand...
Click to collapse
Well i installed w7 to try rsd, but all i got is "failed to switch to fastboot" the phone is already in bootloader mode.
Also try to flash manually the version that you give me, but got error on at least 5/6 files, retry, and all good, but still the same problem.
I dont know what to do anymore, tomorrow i will take the device to a "technician" i dont have hope on this...