Had some issues with RR latest upadte. I don't know I messed up my kernel or what. I tried factory reset also but no joy.
So reverted back to stock ROM debloated , deformed using Cywgin kitchen.
Can anyone help me relocking the boot loader.
The problem I had in RR latest build is that games lag too much ping stays between 150-200 but lagging was the issue so reverted back to stock. No lagging experienced till know but ping is very high nearly 300. (The game I play is bullet force I don't know why it's happening with me).
So far so good. Not even a problem in stock. I will switch to Android8 once RR releases it.
I tried the unofficiallineage OS 15 but due to proximity sensor problem of my phone(Not the ROM it is perfect didn't experience any bugs thanks Luk1337).
Thanks for helping.
Related
Hi. I'm having wifi issues with my Nexus. It started after flashing MIUI. I was using TWRP to flash, it took a while for the google logo to disappear and to get to the Xiaomi bootlogo. After it finally booted, the wifi was stuck to "turning on", but never ultimately firing up(couldn't get it to turn on nor off, even having turning it off). I've also noticed that I have the same EXACT issue with CyanogenMod. I completely returned to stock, i've relocked the bootloader and everything. I tried CM installer today and i'm rooted again with CM, but still I have the same exact issues as before. I don't have these issues with some other roms such as stock, official Omnirom and such, i wouldn't think it would be exactly a hardware issue, since it works just fine with certain roms. Would anyone have an idea why my phone is having this issue? It wasn't always this way. Specifically, I haven't been having issues with 4.4 roms. Does anyone think it could be something related to bootloader, or something?
Juanito216 said:
Hi. I'm having wifi issues with my Nexus. It started after flashing MIUI. I was using TWRP to flash, it took a while for the google logo to disappear and to get to the Xiaomi bootlogo. After it finally booted, the wifi was stuck to "turning on", but never ultimately firing up(couldn't get it to turn on nor off, even having turning it off). I've also noticed that I have the same EXACT issue with CyanogenMod. I completely returned to stock, i've relocked the bootloader and everything. I tried CM installer today and i'm rooted again with CM, but still I have the same exact issues as before. I don't have these issues with some other roms such as stock, official Omnirom and such, i wouldn't think it would be exactly a hardware issue, since it works just fine with certain roms. Would anyone have an idea why my phone is having this issue? It wasn't always this way. Specifically, I haven't been having issues with 4.4 roms. Does anyone think it could be something related to bootloader, or something?
Click to expand...
Click to collapse
i have a similar problem... i rooted my nexus and flashed a custom rom (PACman) when it boots wifi is disabled, also bluetooth doesnt work neither any sounds, no music, no speaker, nothing, so i flashed Paranoid android (both based on 4.3) and i had the same problem
so then i flashed stock, everything ok, then CrDroid (based en 4.4) everything ok, then OmniRom (Based on 4.4) everything ok too...
i posted it here and got no replies, hope someone could help
Yes, right now I'm running an unofficial CM 11, and no issues. I wonder if something needs to be downgraded, in order for things to be okay again. I would still like the option to be able to run 4.2/4.3 based roms. Maybe I could try flashing to stock 4.2 or 4.3, then reroot, and test my results
Sent from my Nexus 4 using Tapatalk
What radio/baseband version are you using?
Hi, I'm using AOKP last nightly builds and since 2013-10-18 Wi-Fi started to stuck, settings ui errors and other problems. So I just tried franko kernel with official AOKP releases and Wi-Fi now is working fine. But i've faced skype problems). After 4 minutes it hangs and i need to restart my phone.
Hi everyone! I have a hardware related issue here.
I have replaced the screen (+digitizer in a whole) and since then it is randomly going off and on. Interestingly it even did the same in recovery (TWRP 2.3) BUT not with every software! Installing the TWRP 2.6 or above stopped it happening in the recovery.
I have tried various ROMs so far. The Eclipse ver3 did not flicker, but it has a problem with the registering on a network here in the UK. Stock + stock based ROM (Rage 1.2) are also switching on-off. I am currently looking for a working ROM.
Please let me know if someone with the same problem can find one.
Also tried to play with developer options like Disable HW overlays or Force GPU rendering with no effect.
I wonder if it is a different hardware version of the replacement screen or what else can it be? (screen came from etradesupply)
Update - problem solved
Good news. Installing CyanogenMOD 11 solved the screen flashing issues and everything seems to work right. Thank you developers!
Hi everyone,
Until recently I've been using a KitKat based ROM and I was pretty OK with how my NOTE 3 SM-9005 was performing. However, a few days ago I decided to try a Lollipop based ROM and the problems started. I had similar problems with 3 different ROMs with great reviews. My battery went, for example, from 100% to 15% in ONE HOUR while streaming from YouTube. It never did that before. Also, It sometimes gives a "system stopped responding" error or something like that (it's like the equivalent of explorer.exe crashing on Windows) and after a few seconds it starts working again. Other system apps crash as well every now and then and sometimes the phone just decides to restart by itself.
I initially used Philz recovery and after the initial errors I switched to TWRP and started from scratch. I completely wiped my system internal space before flashing and, of course, I wiped dalvik cache and cache before and after flashing the ROM. I only used recommended gapps. Also, I did not restore any system apps. I started from scratch after the installation and the problem is the same.
To be more exact, I tries flashing so far the following ROMS, experiencing more or less the same problems on each:
temasek's UNOFFICIAL CM12.1
AryaMod V5.4 TW Lollipop Official BOB6
BlissPop 3.5 Unofficial
I also tried the Dirty Unicorns v9.4 ROM from the Original Android Development section but this one went on a reboot loop initially after the first restart so it never really even installed.
At this point I believe I might have done something that I should't have, but it seems strange because this is not the first time I am flashing a new ROM and I never had problems in the past. Also, my NOTE 3 SM-9500 did not have any problem on my previous KitKat ROM. Did I miss something? Should I have used another kernel? If I understood correctly, the ROMs come with a recommended kernel already. If this is not the problem, what could it be? Should I have done any additional thing before flashing a Lolipop ROM after using a KitKat ROM?
I now installed an app for trying to find out what exactly drains my battery but this is not the only problem. The system itself is really unstable.
I would really appreciate some help, suggestions, or opinions. I really don't know what else should I be doing at this point.
Thanks a lot!
Apparently is the media server eating all that battery (currently 68%).
I will format the SD card hoping this fixes the issue.....but could this have something to do with the system error and, sometimes, restarts?
Well I really don't know what to say! A lot of people report battery problems on 5.0 just because they didn't wipe the phone while coming from KK! But you did, so that's no go. Battery life on LP is much better than KK for me, at least 20% better if not more. And I didn't face any system crashing issues either! Don't really know what's going on with you mate.
Someone suggested that maybe I shoud update the bootloader and modem to a Lollipop version but I really couldn't find any info on how to do that.
Formatting the SD card just slightly reduced the battery drain. The phone is still discharging like crazy. Any suggestion on how to update the bootloader and modem?
Thank you.
Hello,
I have posted this on the cyanogenmod forum but everyone seems to be on holiday as I'm getting no replies. I'm hoping someone on here can help.
I recently had CM12.1 running on my S5 SM-G900F for about six months with no problems. I then switched over to CM13 and used that for about a month without any problems.
I decided to go back to CM12.1, I flashed the same CM12.1 Snapshot file that I had been using previously and it installed without error but when I rebooted the phone it would crash and reboot in a loop during start up. I wiped the phone and tried the install again about four or five times having the same problem until on the final attempt it managed to load the OS. Now that I have the OS running I cant connect to WIFI, the 'back' and 'recent apps' buttons on the phone don't respond (the home button does work), the camera app doesn't work (I get the error 'Can connect to Camera') and it keeps crashing and restarting on reboot. Everything else seems to work but the phone seems sluggish and there may be other errors that I haven't come across yet.
I thought that there may be a problem with the zip file I was flashing so I downloaded it again but it did the same thing. I've tried wiping and reinstalling several times but I get the exact same problems. The file I'm flashing is:
cm-12.1-20151007-SNAPSHOT-YOG4PAO333-klte.zip
If I go back to CM13 everything works fine so the problem is only with CM12.1.
I'm at a lost to explain why this keeps happening as I've had this running fine on my phone previously and wiping the phone and starting again doesn't do anything to solve the problem.
Any ideas please?
Come on people! Have a guess, I'm really stuck here!
I myself have not installed any custom roms on my s5 yet (bc of knox 0x0 lol) but try reverting back to the stock rom and then install cm12.1 again, maybe it could work.
Thanks, but I've tried that. Both stock rom and CM13 work without a problem. The issue only seems to be with CM12.1.
Can you tell what bothered you to go away from cm13 back to cm 12.1?
caned_monkey said:
Thanks, but I've tried that. Both stock rom and CM13 work without a problem. The issue only seems to be with CM12.1.
Click to expand...
Click to collapse
ezantera said:
Can you tell what bothered you to go away from cm13 back to cm 12.1?
Click to expand...
Click to collapse
CM13 sucks!!! snapchat and instagram keeps on crashing, now I'm using resurrection remix 5.7.3, that sucks too!!
I have been having some crazy issues lately. On Yu5510 I was playing clash royale and phone suddenly restarted went on to bootloop at YU logo. If connected with charger this loop breaks. This was RR 1/31 build.
I thought something is broke, cell was also abnormally hot. Like can't-touch-more-than-minute hot
So i went ahead for new build. And clean flashed the unofficial build by @riteshsaxena with gapps.
It did boot but then the story repeated.
Reboot causes was random. Sometimes simple unlock wud do that.
I did post about it to no answer by dev so i went for latest official RR build
Clean flash. No gapps (just in case)
The problem is still the same. Even clean flashes causing boot loops???
I have twrp 3.0 the one available on official site.
I am No developer just an end user. So i dont have knowledge enough to speculate the reasons.
I notice other people are having the same issues. So consider this post on behalf of all of them.
Hoping the discussions and problem solving.
only way to reach RR boot animation is putting the thing on charging. What cud be the problem?
Chinziii said:
only way to reach RR boot animation is putting the thing on charging. What cud be the problem?
Click to expand...
Click to collapse
The problem is caused by battery 99% of the time. If it works when connected to the charger then most probably it is a battery issue. After a while it will not boot up even when connected to charger. Just find a replacement battery and confirm if it is working. Buying a new battery solved the problem for most of the people with same problem.