Hi, everyone.
I have a galaxy s8 SM-G950FD. I have once flashed TWRP and rooted the device successfully.
Then I tried to install a custom ROM but I got bootloop.
After that, I flash official ROM to unbrick my device. But since then, whenever I tried to flash TWRP again I got this message "Verification failed unable to restart your device the integrity verification has failed. You need to reset your device to factory default settings. This will erase all your data."
My device is still working fine but I want to try to flash a new ROM (even if I may brick my device forever). I don't know what to do. Can you guys give me some advice ?
Thank you!
It's quite a simple fix I think: You need to make a backup of the Data partition and then do a wipe using TWRP. This happens because TWRP cannot handle Samsung's Encryption; the only way to bypass this problem is by formatting once again.
MikeTheTechSavvy said:
It's quite a simple fix I think: You need to make a backup of the Data partition and then do a wipe using TWRP. This happens because TWRP cannot handle Samsung's Encryption; the only way to bypass this problem is by formatting once again.
Click to expand...
Click to collapse
But I cannot boot into TWRP. How can I do that ?
If you're stuck in the bootloop you should press the force reboot key combination: Power Down + Home + Power. After the device restarts switch the Volume Down key for the Volume Up key right after the screen goes blank. That should get you into TWRP (if it's correctly installed), otherwise directly into the stock recovery.
MikeTheTechSavvy said:
It's quite a simple fix I think: You need to make a backup of the Data partition and then do a wipe using TWRP. This happens because TWRP cannot handle Samsung's Encryption; the only way to bypass this problem is by formatting once again.
Click to expand...
Click to collapse
MikeTheTechSavvy said:
If you're stuck in the bootloop you should press the force reboot key combination: Power Down + Home + Power. After the device restarts switch the Volume Down key for the Volume Up key right after the screen goes blank. That should get you into TWRP (if it's correctly installed), otherwise directly into the stock recovery.
Click to expand...
Click to collapse
I cant flash/get into TWRP. I tried to boot into stock recovery and do a system wipe/factory reset. Then I flash TWRP again but nothing seem to happen. I tried to boot into recovery and it get me to the stock recovery not TWRP.I did unlock OEM, used Odinv3.12, twrp-3.1.1-2-dreamlte.img.tar.
I had the same issue.
After Odin has flashed the Recovery it performs an auto reboot (if checked in Odin). So at this reboot hold Vol up + Home + Power as soon the screen goes of. You need to be quick. Then it should boot into TWRP.
True, Samsung's stock recovery is very persistent lately and if you tick the auto-reboot you have to be very fast in switching to Recovery mode combo.
Otherwise you can choose not to tick auto-reboot, force restart the device after the TWRP flashing was successful and immediately switch to the Recovery combo.
Here you go: two ways of doing this.
Related
While using the PA Updater app to upgrade my rom, the app attempted to reboot into recovery to run an openrecovery script. While doing this, I believe it set my "reboot mode flag" to recovery.
The tablet boots with the Google screen and then shows the TWRP splash (I'm on version 2.6.0.0), then it reboots and starts again.
I am able to get to the bootloader, but even if I press start or recovery mode it reenters the boot loop trying to get into recovery. In the bootloader was where I saw the reboot mode flag set to recovery. Is there a way to use fastboot to remove that or am I just going to have to do a wipe with fastboot?
It happened to me once. I pushed the power button for 60 seconds as it supposed to do a kind of battery pull, and it worked.
HunterOrHunted said:
While using the PA Updater app to upgrade my rom, the app attempted to reboot into recovery to run an openrecovery script. While doing this, I believe it set my "reboot mode flag" to recovery.
The tablet boots with the Google screen and then shows the TWRP splash (I'm on version 2.6.0.0), then it reboots and starts again.
I am able to get to the bootloader, but even if I press start or recovery mode it reenters the boot loop trying to get into recovery. In the bootloader was where I saw the reboot mode flag set to recovery. Is there a way to use fastboot to remove that or am I just going to have to do a wipe with fastboot?
Click to expand...
Click to collapse
same thing just happened to me... tried Factory Reset and TWRP ran an Open Recovery Script and boom... boot loop... TWRP screen pops up and then goes to loop...
tried pressing powerbutton but no use...
any workaround for this???
Lordificated said:
same thing just happened to me... tried Factory Reset and TWRP ran an Open Recovery Script and boom... boot loop... TWRP screen pops up and then goes to loop...
tried pressing powerbutton but no use...
any workaround for this???
Click to expand...
Click to collapse
I've done this twice to my nexus now and I think I found a reliable way to restore to running condition. YMMV
1)Boot the nexus into fastboot (power and both volume keys) when you power up.
2)Attach your usb cable from the PC (or MAC I guess, dont have one to try)
3)start WUG Nexxus Root Toolkit. 'Launch' advanced utilities.
4)Test your fastboot with Quick tools. check the button at Fastboot-Bootloader and click 'List Devices' if the box that pops up is empty then fastboot isn't working (I can't help you there and it must be working to continue).
5)If fastboot shows a device then go to "Boot Temporary" and click 'Custom Recovery'.
6)I selected 'Touch TWRP' but CMW may work as well. This will reboot you into (temp)TWRP and from there you can force a reboot that will reset the 'Recovery' flag that has locked your bootloader.
7)Give it a few minutes (be patient for 5 minutes) and hopefully you reboot to where you were prior to this mess.
Long time lurker and couldn't fix my fails without everyone here.
Thanks to all.
Bill
HunterOrHunted said:
While using the PA Updater app to upgrade my rom, the app attempted to reboot into recovery to run an openrecovery script. While doing this, I believe it set my "reboot mode flag" to recovery.
The tablet boots with the Google screen and then shows the TWRP splash (I'm on version 2.6.0.0), then it reboots and starts again.
I am able to get to the bootloader, but even if I press start or recovery mode it reenters the boot loop trying to get into recovery. In the bootloader was where I saw the reboot mode flag set to recovery. Is there a way to use fastboot to remove that or am I just going to have to do a wipe with fastboot?
Click to expand...
Click to collapse
I had the same thing happen to me (though i updated from stock 4.4 to 4.4.2 [and i had twrp installed]). I tried reflashing to stock recovery and a few other things but same problem, it kept booting me into stock recovery. I know this is going to sound crazy, even stupid, but just letting it sit there for 5 minutes (at the stock recovery screen) let it work... I was searching for more things to try and it just started booting.... Checking the bootloader again showed the reboot mode flag set to none.
zeroedout420 said:
I had the same thing happen to me (though i updated from stock 4.4 to 4.4.2 [and i had twrp installed]). I tried reflashing to stock recovery and a few other things but same problem, it kept booting me into stock recovery. I know this is going to sound crazy, even stupid, but just letting it sit there for 5 minutes (at the stock recovery screen) let it work... I was searching for more things to try and it just started booting.... Checking the bootloader again showed the reboot mode flag set to none.
Click to expand...
Click to collapse
I guess mine worked because I was still on stock bootloader and adding TWRP was an important key but the 5 minutes seems to be the solution after all the rest.
recovery boot loop:- Is coz, one of your partitions would be facing problems while mounting.. So Wipe the Partition and Format it with Ext-2 file format. and reboot the Mobile. Then it'll stops rebooting.
Do you have a Samsung device?
Be warned - there is no such thing as fastboot mode for most Samsung Galaxy devices - you'll be wasting your time doing this and typing "fastboot devices" for many hours!
If you have problems with your recovery, it works to just reflash the CF-autoroot kit, which happens to flash the cache partition too. My problem was similar to the OP's - a bootloop with TWRP's obviously buggy OpenRecoveryScript, which was installing a ZIP file over and over again.
If you flash the CF-autoroot specific to your device, TWRP will be gone, but the phone will boot normally again - with all your data on it - hooray!
Then you install TWRP or CWM recovery as you did originally.
Stay away from OpenRecoveryScripts! I'll be installing a ZIP file in the traditional, manual way from now on, from an external SD card so I can remove the card if I get another TWRP boot loop.
carltasmania said:
Be warned - there is no such thing as fastboot mode for most Samsung Galaxy devices - you'll be wasting your time doing this and typing "fastboot devices" for many hours!
If you have problems with your recovery, it works to just reflash the CF-autoroot kit, which happens to flash the cache partition too. My problem was similar to the OP's - a bootloop with TWRP's obviously buggy OpenRecoveryScript, which was installing a ZIP file over and over again.
If you flash the CF-autoroot specific to your device, TWRP will be gone, but the phone will boot normally again - with all your data on it - hooray!
Then you install TWRP or CWM recovery as you did originally.
Stay away from OpenRecoveryScripts! I'll be installing a ZIP file in the traditional, manual way from now on, from an external SD card so I can remove the card if I get another TWRP boot loop.
Click to expand...
Click to collapse
How do you install cf-autoroot when stuck in a boot loop with samsung galaxy S device if there is no fastboot?
My phone is stuck in bootloop too. It shows Twrp at the starting and then restarts. What am i supposed to do? I need help ASAP please
Hello, ive unlocked my bootloader on my h870 and ive flashed twrp. when ive just flashed it i was able to boot into twrp but now everytime i try to boot into it it wil wipe all my data with the stock lg recovery mode can someoneone please help me? Thanks! Just got the phone a few hours ago
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
mprovi_15 said:
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
Click to expand...
Click to collapse
Ok but how can i install root or a custom rom when i cannot boot into twrp?
aaflan88 said:
Ok but how can i install root or a custom rom when i cannot boot into twrp?
Click to expand...
Click to collapse
You need to reflash twrp with the bootloader like the first time.
mprovi_15 said:
You need to reflash twrp with the bootloader like the first time.
Click to expand...
Click to collapse
I understand that mprovi but hen again TWRP doesn't boot unfortunately
aaflan88 said:
I understand that mprovi but hen again TWRP doesn't boot unfortunately
Click to expand...
Click to collapse
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
The stock recovery appears but you have to select the factory reset option and it will boot into TWRP
mprovi_15 said:
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
Click to expand...
Click to collapse
Unfortunately still not succeeded after trying all the solutions i've found here
Hey, i have the same Problem, my TWRP broke, i can't boot into recovery and my Device ist not listed in fastboot mode. Can someone help me out?
I get the ring in windows when i plugin but its not recognizing.. Can someone pls help me out?
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
dwasifar said:
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
Click to expand...
Click to collapse
Oh my god, i really really thanks for your reply, you're so fre*king good. U made my day.
Guys a little help
I only manage to see the TWRP welcome screen and the the phone automatically reboots to system
I can't get to see the TWRP menu at all!!
WTF is going on?
I have repeated the process many many times and always the same. What i am missing here?!?!?
me too when it boots in twrp only showing logo then it reboots in system what are wedoing wrong?
Got the same problem. I unlocked Bootloader, checked if unlocked (yes). After flashing TWRP i see the TeamWin Screen and phone boot again. There is no TeamWin Menu.
A try with an older TWRP-Version and flashing via fastboot with another PC does not work too.
Anybody an idea?
Did you guys manage to fix it?
Matt.
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
MiR4G3 said:
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
Click to expand...
Click to collapse
With 3.2.1.0, 3.2.2.0 and 3.2.3.0 it only briefly shows the TWRP screen and then boots into system anyway.
With 3.1.1.0 the key combination to boot into TWRP as with the other versions above simply doesn't work, again it directly boots into system without even showing the TWRP screen.
I'm stuck with a resetted phone because of this bull****, because some instructions said "oh, the reset dialog will not really reset your data..." - yeah thanks for nothing, buddy.
So what now?
EDIT: I got it working using TWRP 3.1.1.0, but the same version from the OFFICIAL site didn't work, as I described above.
The only 3.1.1.0 TWRP that works with my phone is the one from this Link: http://downloads.codefi.re/rashed/g6/
(which is linked ... somewhere here in the Forum, don't remember which thread)
Hey everyone,
I decided to root my lg g6 and got a fickle. After unlocking the device and flashing TWRP I tried to boot into it (''adb reboot recovery'' command) and it deleted all data and then twrp shows on screen for a split second and almost instantly boots normally into android so I set it up while still being unable to access twrp and any of it's functions. Does anyone have any idea what could be the problem?
P.S. Of it helps: before that i had a problem that every time I tried to use the ''adb reboot recovery'' command the console said ''no devices/emulators found''. After a couple tries I wanted to check whether the phone was connected just to make sure (''adb devices'') and after that it worked and I ran into the problem above.
Thanks for all the answers
When you first unlock BL and flash recovery you have to manually enter recovery mode.
Hold power and vol down till it turns off. Hold same buttons again until you see lg logo. Release power and press and hold again.
Then ask you to wipe etc hit yes both times and it will boot to twrp.
I tried that but it still doesn't go into twrp. After confirming that wipe stuff it just boots into android (without wiping)
Ulrih said:
I tried that but it still doesn't go into twrp. After confirming that wipe stuff it just boots into android (without wiping)
Click to expand...
Click to collapse
You have to flash TWRP recovery and when it complete then use the button combo to boot into twrp, otherwise it will boot and restore the recovery.
flash twrp
button combo to twrp
done
Yes I've done that but the problem still exist.
btw thanks for the help
Maybe try fastboot flash recovery recovery.img
Try the all-in-one tool on this forum
By the way, I am running into the same issue.. I have a LG G6 US997,.. I have tried installing TWRP unofficial ones so many times and every time i manually try to access the recovery.. the phone simply wipes all my data to default
Hello,
I have the same problem. Did anyone figure out how to solve it? I'd highly appreciate any help.
If I try to boot into recovery, it asks me to factory reset, i hit yes twice and then the phone just goes on to boot normally. The data is not wiped but I can't get into TWRP.
If I enter "fastboot reboot recovery" after flashing TWRP it returns "fastboot: usage: unknown reboot target recovery"
LS997 (September 2016 security patch), got to the end of root and couldn't reboot into TWRP recovery. The device is recognized in ADB while in fastboot but when I'm at the secure startup it's unrecognized, like USB debugging is disabled.
https://forum.xda-developers.com/v20/how-to/guide-root-twrp-lg-v20-using-dirtysanta-t3722278
If you've hit secure startup the phone has likely booted into regular Android far enough to replace twrp with stock recovery. Reboot into fastboot and reflash twrp (you can use the newest twrp if you want). Once done flashing unplug from PC and pull the battery. Reinsert the battery then boot into twrp via the factory reset/volume button method: hold volume down, press power until the screen turns on then (still holding vol - ) tap power repeatedly until a prompt to factory reset appears. Approving it twice boots twrp if it's installed, otherwise stock recovery will do the reset.
Once in twrp go to wipe, then format data (type yes to confirm), then go to reboot, then recovery. Once twrp restarts flash your choice of magisk/supersu.
Once one of those two is installed it makes it so twrp won't be replaced.
Phoenix591 said:
If you've hit secure startup the phone has likely booted into regular Android far enough to replace twrp with stock recovery. Reboot into fastboot and reflash twrp (you can use the newest twrp if you want). Once done flashing unplug from PC and pull the battery. Reinsert the battery then boot into twrp via the factory reset/volume button method: hold volume down, press power until the screen turns on then (still holding vol - ) tap power repeatedly until a prompt to factory reset appears. Approving it twice boots twrp if it's installed, otherwise stock recovery will do the reset.
Once in twrp go to wipe, then format data (type yes to confirm), then go to reboot, then recovery. Once twrp restarts flash your choice of magisk/supersu.
Once one of those two is installed it makes it so twrp won't be replaced.
Click to expand...
Click to collapse
Did this, got to the set-up screen (languages, accessibility) and an error ¨com.android.phone has stopped¨ spammed the screen. I tap ¨stop app¨ and the pop-up comes back immediately.
I tried to fix it by factory resetting (in the settings, NOT using the volume down/power button menu OR TWRP) and now I´m stuck in TWRP. Every time I try to reboot to System, it boots to TWRP now.
strapdad said:
Did this, got to the set-up screen (languages, accessibility) and an error ¨com.android.phone has stopped¨ spammed the screen. I tap ¨stop app¨ and the pop-up comes back immediately.
I tried to fix it by factory resetting (in the settings, NOT using the volume down/power button menu OR TWRP) and now I´m stuck in TWRP. Every time I try to reboot to System, it boots to TWRP now.
Click to expand...
Click to collapse
Power down, then boot to twrp using the volume buttons. Use the wipe menu there to do the reset.
Phoenix591 said:
Power down, then boot to twrp using the volume buttons. Use the wipe menu there to do the reset.
Click to expand...
Click to collapse
Wiped it, still get the com.android.phone errors.
Unfortunate, makes doing anything impossible with so many error popups.
strapdad said:
Wiped it, still get the com.android.phone errors.
Unfortunate, makes doing anything impossible with so many error popups.
Click to expand...
Click to collapse
Reflash your variant's official KDZ using [PARTITION DL] with patched LGUP leaving [aboot], [abootbak], [recovery], [recoverybak] partitions unchecked.
- Once the flash finishes & phone reboots, do a battery pull so phone doesn't fully boot (wiping recovery & encrypting data)
- Insert battery again
- While pressing volume down button - reinsert usb cable so it boots into fastboot mode.
- Follow dirtysanta guide for your variant from running step3.bat onwoards (which flashes TWRP back into your otherwise stock phone).
LS997, no official KDZ. Use VS995, but dump everything with LGUP (bar userdata) before hand
Seems I found a way to semi brick my SM-T500. I was attempting to install the LOS 18.1 ROM just posted in the guide section. Some how I got the "can only install official" error message on my download screen after flashing TWRP. Made the mistake of flashing only the stock AP without BL or CSC and now I can't get into either recovery or download modes. Holding vol up and down and plugging in USB cable does nothing. Same with holding power button and either vol up or down. Blank screen. Can only power on and boot to system.
Did you install twrp and can you get into recovery. I had similar problem but was still able to get into download mode from power off. However to do so I had to boot into twrp and select reboot and power off... from that menu you can also boot directly to download mode... I know that doesnt halp much if you hadnt installed twrp yet... but thought I would throw that out there...
wizzdome said:
Did you install twrp and can you get into recovery. I had similar problem but was still able to get into download mode from power off. However to do so I had to boot into twrp and select reboot and power off... from that menu you can also boot directly to download mode... I know that doesnt halp much if you hadnt installed twrp yet... but thought I would throw that out there...
Click to expand...
Click to collapse
I can't boot TWRP or download. The only thing that will boot is system. Can't even get to the lock/unlock screen.
can you connect to adb shell? and try #reboot download
or #reboot twrp. I figure if you get to download you can reflash stock and start over.
Also when your trying to boot into recovery try not being plugged in. Not sure about this device but a lot of older Samsung's that I had would not let me get into recovery if I was plugged in during boot.
Locked oem mode
Locked download mode
Locked wipe factory
Locked update from sd card
Recycling item...
Need factory reset
I saw alot of issues with twrp so I tried Magick for first time ever on my SM-T500 and had a minor hiccup bc I wasn't paying attention to firmware and installed an old AP with newer firmware but ended up just reflashing the whole tablet with the same firmware as the AP that is required for Root and presto it worked! AND HEY IM DEF A NEWBIE!
housemusix said:
Locked oem mode
Locked download mode
Locked wipe factory
Locked update from sd card
Recycling item...
Need factory reset
Click to expand...
Click to collapse
Yeah I've run into the same thing, I originally missed the step to run Magisk after I flashed the patched tar and rebooted into the System and it triggered the "Prenormal KG state" problems. Finally I managed to flash stock ROM back and got to exactly where you are now.
I was able to just flash the patched Magisk AP without CSC and BL, and now it will only go to stock recovery and was able to get TWRP to work once but couldn't factory reset or wipe cache due to (which I assume was) a ton of mounting failures when it loaded.
Anyone else have suggestions to get this thing stable so I can flash LOS? I can get to Download mode.
hello, I post this because it's seems the same subject. I have to password protected (forget password) original rom tablet (non root). For me the datas are not important , I just want to remove the password or reflash with original rom. I downloaded Odin , usb driver and correct firmware. I select AP firmware with Odin, I see the connexion (COM3 green) and it's stuck to "setup connexion".
My problem is that it's impossible to enter in download mode.
When I try to shutdown the tablet, it ask me for a password.
When I press for seconds the power button , after few second I see the Samsung Logo and the tablet restarts.
I try to press volume up, volume up and volume down etc...but each combinaison...no recover, no download mode, nothing and impossible to flash . is it normal ? how to do to unsticked SetupConnetion ?
regards
bruno
housemusix said:
Locked oem mode
Locked download mode
Locked wipe factory
Locked update from sd card
Recycling item...
Need factory reset
Click to expand...
Click to collapse
This is not the same as my problem. My problem is that I flashed AP without BL and the two don't match. It isn't that things are locked but that I can't boot to anything but system. Can't boot recovery or download so I can't flash ANYTHING. Not even stock.