Database Users

p8 lite keep blinking on huawei logo

p8 lite keep blinking on huawei logo
i try to reprogram via sd card but it not going to updating mode and keep blinking on huawei logo
is there any possible way to solve this problem
is there any other way to flash like adb ?
if yes then share the procedure and the files

kindly share ur expertise

where are the experts ?

What you have written does not provide information about the problem that you have.
Describe in detail what you tried to do. If you tried to install a new firmware write full model that you have and software

wat type of information u want ?
simple is that huawei p8 lite ale-l21 just reboot on huawei logo
and when i try to reprogram via sd card (dload) and press volume + - but set not going to update mode

OK
1. Which version of firmware running now on device
2. Which version of firmware you want to install
3. What were your actions before you get to the problem
I can not guess what you have done to get this problem

i recieve this phone in the same condition from customer
so i dont know the version ?

Try this
Bootloader must be unlocked!!!
1. Connect device with PC
2. With two buttons enter into bootloader (Volume down+Power button+MicroUSB)
3. Download this rom(B052) and execute FLASH-ALL.bat file https://drive.google.com/file/d/0B1rEfLdrJbhKX0plUjFVb3ZVSjQ/view?usp=sharing
Wait to flash rom
If everything is ok you get mobile with original firmware now you can flash via OTA last update for your device

thnx for the useful reply but the problem is : for unlocking bootloader imei and product serial number and product id is needed
imei i get from box
but how to get product serial number
and for product id need to dial this *#*#1357946#*#* but set is rebooting on logo
any other way to unlock bootloader
hope get authentic and useful reply for u

First try factory reset again with two buttons( Volume up+Power button)
If the problem still continue download and use this for view info about the device! https://drive.google.com/file/d/0B1rEfLdrJbhKTTZ0ZlpYd3R2VWs/view?usp=sharing
Connect phone with PC and run bat file and executable if you lucky may be get info about unlock bootloader

there are 8 items
adb.exe
adbwinapi.dll
fastboot.exe
oneclick-root-for-plite.bat
recoveryp8lite.img
stockrecovery.img
update-supersu-v2.46.zip
so i only download .bat or something else ?
appreciate ur assitance

Opss
Sorry but I wrong the link. This is correct link https://drive.google.com/file/d/0B1rEfLdrJbhKWjFrVUxJdGNsTXM/view?usp=sharing
First try factory reset again with two buttons( Volume up+Power button)

Huawei p9 lite bricked, no fastboot, unlocked and stucked on boot....

Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english

I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method

o-w-a said:
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
Click to expand...
Click to collapse
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation.. Everything i do with the buttons the phone resetting and stays on until the battery is dead..

ioanpara said:
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation..
Click to expand...
Click to collapse
do you get verification error or is it just stuck at "your devices is booting now"

o-w-a said:
do you get verification error or is it just stuck at "your devices is booting now"
Click to expand...
Click to collapse
Stuck on "your device is booting now".

ioanpara said:
Stuck on "your device is booting now".
Click to expand...
Click to collapse
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.

o-w-a said:
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
Click to expand...
Click to collapse
Exactly!

I am still in the same situation... Anyone who knows what to do?

ioanpara said:
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
Click to expand...
Click to collapse
Hmm I dont get why they want 215 euro to exchange the storage chip.
I guess your phone is pretty much a brick now have fun. Lol sry

I had a similar problem with the boot-loop.
Press PowerOff until the screen goes black, and then immediately leave power-off and press Power Off + Volume Up for ever until the phone boots normally.
That's what I did and worked for me.

Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.

Dejan Kruljac said:
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Click to expand...
Click to collapse
No he cant, I have the same problem. Cant fastboot, adb or 3 button method. Even tried unplugging battery then doing 3 button method.

Anyone sopve this problem with no fastboot no recovery no 3 buttons mode?

try to drain the battery, keep screen on, or keep phone on until battery is 0%, you can't turn it on . keep volume down and power pressed, plug usb to pc , if you're lucky fastboot could be ok

Hi there, I also managed to brick my P9Lite - no recovery, no fastboot. After draining the battery completly the phone starts fine but I can't install system updates. I guess I have to live with that. Unfortunately I can't activate bluetooth. Does anyone has an idea how to get bluetooth working again?

idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.

sonneper said:
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
Click to expand...
Click to collapse
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...

Hello guys,
sorry if i write this but i think necessary to grab best helps..
Try to describe problem in detail (ex. - i was upgrading/downgrading from..........to............ firmware and it bricks, etc...)
Your latest working phone/system/firmware (ex. - mine was VNS-L31C432B381-before i upgraded to EliteRom).
Some information changes according to the country / region of the world in which you live,
so they are useful for those who help you to redirect to the correct thread / give right suggestions...
All the best guyz

didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Yes , a way to get last firmware, or firmware you want through the huawei update app. Without firmware finder ,no way to " force" huawei update app to install anything you want on your device

Sorry for the late response, I'm reading the thread right now. Firmware Finder can also be used to install firmware through eRecovery. Install Firmware Finder for Windows: http://pro-teammt.ru/projects/hwff/v2/GetLatestVersion.action
You need to write down your existing and change both DNS addresses in your router to: 81.177.139.39
You also need to deactivate IPv6 protocol.
Open FirmwareFinderRewrite.exe, go to "common base" and search VNS-LXXCXXX (Your model and customization). Copy the link in "changelog" not of the newest, but of the 2nd or 3rd youngest firmware. Check if it has been approved by pasting the link under the tab with the checkmark (5th position counting from left). If the response is "This firmware was approved to install" you are ready to go.
Copy the same link in the proxy field (the cloud symbol, 4th position counting from left). Click on "set" and "register update".
Now switch off your phone, press "Vol+" and simultaneously connect it to the PC. You enter eRecovery now. Tap on "Download latest version and recovery". Your phone should start the download now, after a couple percent you can reset your router settings, the download will continue. If all is well, the firmware will then be installed.

Bricked M3 (no recovery possible) any way so save it?

Hi all,
I don't really know how I got my Mediapad M3 (BTV-DL09 , EU) bricked, but well I wanted to reflash the stock firmware (downloaded via the Huawei support page).
(Had one installed via firmware finder and wanted not to get shown from africa in speedtest apps.)
I put the file on my sdcard (/dload) and it installed it.
After it said "completed" the pad restarted and now I only get the "Huawei MediaPad" + "Powered by Android) screen. It's not possible to get it installing from sdcard again.
(By pressing volume down + power it only vibrates 2x and then the welcome screen comes back)
I can get to fastboot but I can not flash anything there because of an locked bootloader (I suppose I can not unlock it only using fastboot, can I?).
Plus the hisuite says it does not support the medipad m3 for recovery.
Any hints how to save the mediapad without sending it to the support?

nospherato said:
Hi all,
I don't really know how I got my Mediapad M3 (BTV-DL09 , EU) bricked, but well I wanted to reflash the stock firmware (downloaded via the Huawei support page).
(Had one installed via firmware finder and wanted not to get shown from africa in speedtest apps.)
I put the file on my sdcard (/dload) and it installed it.
After it said "completed" the pad restarted and now I only get the "Huawei MediaPad" + "Powered by Android) screen. It's not possible to get it installing from sdcard again.
(By pressing volume down + power it only vibrates 2x and then the welcome screen comes back)
I can get to fastboot but I can not flash anything there because of an locked bootloader (I suppose I can not unlock it only using fastboot, can I?).
Plus the hisuite says it does not support the medipad m3 for recovery.
Any hints how to save the mediapad without sending it to the support?
Click to expand...
Click to collapse
If you can get into fastboot mode, you can try flashing the boot image from stock rom for your phone just extract it from the rom.. you won't be able to unlock the BL as you would need to OEM unlock tic in the Developer options, hopefully you already had USB debugging tick or this all might be a moot point..

nospherato said:
Hi all,
I don't really know how I got my Mediapad M3 (BTV-DL09 , EU) bricked, but well I wanted to reflash the stock firmware (downloaded via the Huawei support page).
(Had one installed via firmware finder and wanted not to get shown from africa in speedtest apps.)
I put the file on my sdcard (/dload) and it installed it.
After it said "completed" the pad restarted and now I only get the "Huawei MediaPad" + "Powered by Android) screen. It's not possible to get it installing from sdcard again.
(By pressing volume down + power it only vibrates 2x and then the welcome screen comes back)
I can get to fastboot but I can not flash anything there because of an locked bootloader (I suppose I can not unlock it only using fastboot, can I?).
Plus the hisuite says it does not support the medipad m3 for recovery.
Any hints how to save the mediapad without sending it to the support?
Click to expand...
Click to collapse
I got a potential solution, check it out and let me know if you need any more help.
https://forum.xda-developers.com/mediapad-m3/help/bricked-mediapad-m3-t3746893

@mediapadguy
Was it possible to unlock your bootloader without enabling the switch inside the os?
Thanks for this hint, but it wasn't able for me to flash the img files because I wasn't really sure if it wasn't something hardware related and didn't want to unlock the bootloader and lose warranty.
I was really pi**ed about it, because I couldn't repair the pad myself, but afterwards it was a good decision as the service center couldn't just reinstall the software, but had to order spare parts!
(Still waiting for them.)
But it's really good to here it is possible to flash repair the pad (as long as the bootloader is unlocked at least).

If by switch in the OS you mean USB debugging switch then yes. Fastboot allows you to unlock bootloader without it I believe. You need an unlocked bootloader to flash the .IMG files. I completely understand btw, I was scared to do it as well. But I'm based in the US so I have no choice, no service center near me. I hope they fix your pad ASAP.

No with switch I ment this OEM unlock tic in the Developer options lilbrat mentioned before.

I bricked my p8 Lite by accident. Please help!

Hi,
I bricked my Huawei P8 Lite by accident when I tried to root it after unlocking bootloader. I can't post links here yet but I followed Rootjunky.com's Youtube video "How to Root the Huawei P8 Lite Android phone" and while I was in the process of installing SuperSU it froze on the logo startup screen and won't go past it. People say in the comments that this happens with the 6.0 version but I'm not sure what I have. I've tried rebooting using power button plus down and can get to the recovery mode screen and hit "eRecovery" but it won't connect with the wifi.
Is there any way I can solve this? I am desperate! I have the "Minimal ADB and Fastboot" program on my PC. Is there something I can do from the fastboot screen on the phone?
Help please!

Try using marahmallow latest update.app and after that lollipop rollback update.app, put into dload folder on sdcafd and hold volume up + volume down + power until update starts

aciupapa said:
Try using marahmallow latest update.app and after that lollipop rollback update.app, put into dload folder on sdcafd and hold volume up + volume down + power until update starts
Click to expand...
Click to collapse
Hey, thanks, but I'm not sure on how to do this. I don't have much experience with the technical side of this and I'm not really sure how to go about doing what you suggest here. Do you mean put the downloads on the sd-card on my phone? My phone don't show up on my pc since it gets stuck in start-up mode so how would I do that?
Thanks for your patience with an imbecille!

Olawlaw said:
Hey, thanks, but I'm not sure on how to do this. I don't have much experience with the technical side of this and I'm not really sure how to go about doing what you suggest here. Do you mean put the downloads on the sd-card on my phone? My phone don't show up on my pc since it gets stuck in start-up mode so how would I do that?
Thanks for your patience with an imbecille!
Click to expand...
Click to collapse
Here you have a really nice guide with links etc https://huaweifirmware.com/huawei-p8-lite/
Make sure to label the folders correctly. Use an adapter or another phone to connect microsdcard to your computer Try to use the second, marshmallow part. if ot doesnt work try two other methods. Choose files accordingly (single sim or dual sim) Hope you will fix your phone

Phew! Okay, so I got it to work! For anyone out there with the same problem, I got it to work by entering the fastboot screen on the phone by holding down the power button plus the volume down button, connecting it to my PC and then using the command prompt program 'Minimal ADB and Fastboot' to flash the files BOOT.img, RECOVERY.img and SYSTEM.img (using the command "fastboot flash boot filename FILENAME.img") that I got from Huawei's official UPDATE.app file and extracted with Huawei Update Extractor.
I didn't know what Firmware build to get so I got the B630 Android Marshmallow 6.0 for my model ALE-L21 (Dual SIM). It worked, but can anyone tell me if this is the right build, and how do I know which one is the right one if I can't access the old info on my phone? Is it even the latest one? I'm in Europe.

P9 Lite VNS-L22 Bricked - No bootloader, don't know the cust

Hi everyone! I need some help here, I have a Huawei p9 lite VNS-l22, from my uncle, this phone is in a bootloop, after a few reboots, it enter in E-recovery mode, but don't fix the problem
I can't unlock bootloader, because, huawei stopped sending codes
Another problem that I have, is that I don't know which is the "Cust" of the phone, because, it never completely boot, so I can't see it in settings
Apparently, It entered in this "situation" during a failed update
Thanks!

one0407 said:
Hi everyone! I need some help here, I have a Huawei p9 lite VNS-l22, from my uncle, this phone is in a bootloop, after a few reboots, it enter in E-recovery mode, but don't fix the problem
I can't unlock bootloader, because, huawei stopped sending codes
Another problem that I have, is that I don't know which is the "Cust" of the phone, because, it never completely boot, so I can't see it in settings
Apparently, It entered in this "situation" during a failed update
Thanks!
Click to expand...
Click to collapse
Hello,
try a factory reset from e-recovery..
Yes you could unlock the bootloader via paid service,
but you cannot because you cannot access
the developer options and tick the oem unlock...
Do you remember if the device was on android 6 or 7 before the bootloop ?
Which region do you live ? (for the cust)

Dadditz said:
Hello,
try a factory reset from e-recovery..
Yes you could unlock the bootloader via paid service,
but you cannot because you cannot access
the developer options and tick the oem unlock...
Do you remember if the device was on android 6 or 7 before the bootloop ?
Which region do you live ? (for the cust)
Click to expand...
Click to collapse
Hi! sorry for late response!
I´m not sure if it was android 6 or 7
I live in Venezuela, Latin America, what do you recommend, without unlocking bootloader, e recovery factory reset doesnt work

one0407 said:
Hi! sorry for late response!
I´m not sure if it was android 6 or 7
I live in Venezuela, Latin America, what do you recommend, without unlocking bootloader, e recovery factory reset doesnt work
Click to expand...
Click to collapse
Don't worry dude,
we can reply when we find time for...
Important !! READ BEFORE DO ...
I made a little search and think you
have a couple possibility...
1 - bring your device to a service point but it will cost you money.
2 - try flash a firmware and pray your phone someway will come back to life...
You have nothing to lose, try doing this ...
Download THIS FILE (update.zip).
Unzip it and extract update.app file.
Take an SD card with at least 4gb and format as FAT32.
Then inside that SD card create a folder and rename it DLOAD.
Put update.app file into DLOAD folder and insert the SD inside the device.
Turn off the device then turn it on holding vol+ vol- and power buttons together
till a flash screen will appear...
If it goes well you will have a device with a corrupt but functioning firmware ...
At this point you'll be able to unlock the bootloader (it will cost 4 euros),
make a complete rebrand (asian L22 version) and have a full functioning device..
If something will not go as expected, only way is bring the device to a service point...
Choise remain yours..
Cheers

Dadditz said:
Don't worry dude,
we can reply when we find time for...
Important !! READ BEFORE DO ...
I made a little search and think you
have a couple possibility...
1 - bring your device to a service point but it will cost you money.
2 - try flash a firmware and pray your phone someway will come back to life...
You have nothing to lose, try doing this ...
Download THIS FILE (update.zip).
Unzip it and extract update.app file.
Take an SD card with at least 4gb and format as FAT32.
Then inside that SD card create a folder and rename it DLOAD.
Put update.app file into DLOAD folder and insert the SD inside the device.
Turn off the device then turn it on holding vol+ vol- and power buttons together
till a flash screen will appear...
If it goes well you will have a device with a corrupt but functioning firmware ...
At this point you'll be able to unlock the bootloader (it will cost 4 euros),
make a complete rebrand (asian L22 version) and have a full functioning device..
If something will not go as expected, only way is bring the device to a service point...
Choise remain yours..
Cheers
Click to expand...
Click to collapse
THANK YOU! this actually worked very well!

one0407 said:
THANK YOU! this actually worked very well!
Click to expand...
Click to collapse
You have been very lucky and I am so happy
you can still use the device. :highfive:
Cheers