my G6 H870 unlocked successfully
<<
C:\Users\Administrator>adb reboot bootloader
C:\Users\Administrator>fastboot getvar unlocked
unlocked: yes
finished. total time: 0.004s
>>
then flashing TRWP return failed :
<<
C:\Users\Administrator>fastboot flash recoery C:\adb\twrp1.img
target reported max download size of 536870912 bytes
sending 'recoery' (21348 KB)...
OKAY [ 0.536s]
writing 'recoery'...
FAILED (remote: cannot flash this partition in unlocked state)
finished. total time: 0.568s
C:\Users\Administrator>
>>
cannot flash this partition in unlocked state, How can I do?
flash TRWP go to which mode,fastboot mode or download mode,or...??
Do I need special operations?Help me
You've misspelled "recovery".
Aha，I didn't see it，thank you !!!
I didn't know misspelled word. I'll try again,thanks.
Related
Hiii,
I've read many threads but didn't find my answer, I have an unlocked bootloader but can't flash TWRP recovery.
Tried many different versions but all tries give me an "remote: image verification error"
Device is fastboot mode:
C:\Temp>fastboot devices -l
4<serial hidden>7 fastboot
Bootloader unlocked with official unlock code:
C:\Temp>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.007s
Flash TWRP (failed) and flash STOCK (success):
C:\TEMP>fastboot flash recovery recovery_twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (28928 KB)...
OKAY [ 0.617s]
writing 'recovery'...
FAILED (remote: image verification error)
finished. total time: 0.634s
C:\TEMP>fastboot flash recovery recovery_stock.img
target reported max download size of 471859200 bytes
sending 'recovery' (32960 KB)...
OKAY [ 0.701s]
writing 'recovery'...
OKAY [ 1.102s]
finished. total time: 1.805s
Any ideas... what can I do/ what should try?
Thx!
Strange is when I :
C:\Temp>fastboot oem get-lockstate
...
(bootloader) locked
OKAY [ 0.004s]
finished. total time: 0.005s
it say's it's locked, but when I try to unlock with correct code, it gives a message wrong password, so it's unlocked :|
roelprincen said:
Hiii,
I've read many threads but didn't find my answer, I have an unlocked bootloader but can't flash TWRP recovery.
Tried many different versions but all tries give me an "remote: image verification error"
Device is fastboot mode:
C:\Temp>fastboot devices -l
4<serial hidden>7 fastboot
Bootloader unlocked with official unlock code:
C:\Temp>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.007s
Flash TWRP (failed) and flash STOCK (success):
C:\TEMP>fastboot flash recovery recovery_twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (28928 KB)...
OKAY [ 0.617s]
writing 'recovery'...
FAILED (remote: image verification error)
finished. total time: 0.634s
C:\TEMP>fastboot flash recovery recovery_stock.img
target reported max download size of 471859200 bytes
sending 'recovery' (32960 KB)...
OKAY [ 0.701s]
writing 'recovery'...
OKAY [ 1.102s]
finished. total time: 1.805s
Any ideas... what can I do/ what should try?
Thx!
Strange is when I :
C:\Temp>fastboot oem get-lockstate
...
(bootloader) locked
OKAY [ 0.004s]
finished. total time: 0.005s
it say's it's locked, but when I try to unlock with correct code, it gives a message wrong password, so it's unlocked :|
Click to expand...
Click to collapse
same with me ?
Try to relock and then unlock. I've had this problem too after downgrade to mm by official Huawei rollback package. Then phone and other tools shows than phone is unlocked and it was unable to flash recovery.
if it says wrong password it means you got the wrong password. it will say it's already unlocked if you try unlocking it while it's unlocked
My phone was unlocked with Potato v2.0.1, with working TWRP, rooted etc...
I solved this problem that arose after unsuccesfully install custom Rom, restore backup of stock rom, install update through dload and many many other attempts at improvement of my smartphone :-( No more time again!!!
Probably installing update through Dload will relock bootloader, but in the fastboot mode it says bootloader still unlocked.
Before I did all this, I had an original stock rom.
1: Relock bootloader with PotatoNV v2.0.1 (You need to open case and connect tespoint by wire - look on Youtube, i´ve find it there, also you need "Huawei testpoint drivers")
2: Factory reset
3: Install any update stock rom with Dload (Vol up + Vol down + power)
4: Factory reset
5: Developer options-turn on OEM unlock and USB debbuging
6:Unlock bootloader with PotatoNV v2.0.1 - keep password generated by Potato
7:Multitool 8 for Huawei - in the bootloader state unlock bootloader again - use password generated by Potato
8:Multitool 8 for huawei - install TWRP - it says "Succesfully installed" - TWRP works, root is possible. Yeah!!!
May be this is not right way to solve this, but for me it workś..
Hi,
I have a p9 lite VNS-L31 Europe Model.
I have Phone Unlocked and FRP Unlocked.
The problem is that i can no loger boot the device.I tried using the toolkit found here on the server,but it doesn't recognize it anymore.
I tried using cmd fastboot devices. It shows there but i cannot give any command.
"
C:\Users\Nick>fastboot flash system C:\Users\Nick\Desktop\p9\system.img
< waiting for device >
target reported max download size of 471859200 bytes
sending sparse 'system' (451240 KB)...
OKAY [ 15.605s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 15.619s
"
C:\Users\Nick>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.000s]
finished. total time: 0.000s
"
I have downloaded a full version.
How can i fix my device ?
Delete...
NickBond said:
Hi,
I have a p9 lite VNS-L31 Europe Model.
I have Phone Unlocked and FRP Unlocked.
The problem is that i can no loger boot the device.I tried using the toolkit found here on the server,but it doesn't recognize it anymore.
I tried using cmd fastboot devices. It shows there but i cannot give any command.
"
C:\Users\Nick>fastboot flash system C:\Users\Nick\Desktop\p9\system.img
< waiting for device >
target reported max download size of 471859200 bytes
sending sparse 'system' (451240 KB)...
OKAY [ 15.605s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 15.619s
"
C:\Users\Nick>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.000s]
finished. total time: 0.000s
"
I have downloaded a full version.
How can i fix my device ?
Click to expand...
Click to collapse
Unlock your smartphone again.
JustChris20 said:
Unlock your smartphone again.
Click to expand...
Click to collapse
How ?
Fixed it
Hei
I managed to fixed it by dload with nrd90m test-keys with an SD Card.Then power up with the power and volum + and - .
It works now.
Hey guys, i wanted to unlock bootloader, and so i UNLOCKED BOOTLOADER, FLAHSED TWRP, TRIED TO FLASH CUSTOM ROM.
the twrp compared tz version and ended up in an error, so i searched online to know that, we need to update the system.
so i flashed recovery.img on top of twrp and rebooted where the fastboot got lost and ended up in a dead boot.
no vibrations, no led, no charging, no fast boot.
then i flashed using qfil using qualcom husb and got back the fastboot.
but this time, in fastboot, when i try to flash boot, system or recovery, it says, ::ARTITION TABLE DOES NOT EXIST.
so i tried to flash the gpt_both0.bin file as partition, and gave an error message of::: CANNOT FLASH THIS PARTITION IN LOCKED STATE.
i tried to fastboot boot twrp.img and ended up::: UNLOCK DEVICE TO USE THIS COMMAND.
so im pretty much got my bootloader locked and im unable to unlock it so i can flash stuffs.
the question is, how to flash the bootloader using fastboot so i can flash the rest and continue/??
Code:
C:\adb>fastboot devices
5072e4de fastboot
C:\adb>fastboot flash boot boot.img
target reported max download size of 268435456 bytes
sending 'boot' (24869 KB)...
OKAY [ 0.784s]
writing 'boot'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.799s
C:\adb>fastboot flash partition gpt_both0.bin
target reported max download size of 268435456 bytes
sending 'partition' (33 KB)...
OKAY [ 0.016s]
writing 'partition'...
FAILED (remote: cannot flash this partition in locked state)
finished. total time: 0.016s
C:\adb>fastboot flash recovery twrp.img
target reported max download size of 268435456 bytes
sending 'recovery' (29968 KB)...
OKAY [ 0.944s]
writing 'recovery'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.952s
C:\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.950s]
booting...
FAILED (remote: unlock device to use this command)
finished. total time: 0.950s
https://www.androidfilehost.com/?fid=24671318762849134 you need to flash this fisrt before flash custom rom
Same Problem XDA devs Pl Help
Kabeesh said:
Hey guys, i wanted to unlock bootloader, and so i UNLOCKED BOOTLOADER, FLAHSED TWRP, TRIED TO FLASH CUSTOM ROM.
the twrp compared tz version and ended up in an error, so i searched online to know that, we need to update the system.
so i flashed recovery.img on top of twrp and rebooted where the fastboot got lost and ended up in a dead boot.
no vibrations, no led, no charging, no fast boot.
then i flashed using qfil using qualcom husb and got back the fastboot.
but this time, in fastboot, when i try to flash boot, system or recovery, it says, ::ARTITION TABLE DOES NOT EXIST.
so i tried to flash the gpt_both0.bin file as partition, and gave an error message of::: CANNOT FLASH THIS PARTITION IN LOCKED STATE.
i tried to fastboot boot twrp.img and ended up::: UNLOCK DEVICE TO USE THIS COMMAND.
so im pretty much got my bootloader locked and im unable to unlock it so i can flash stuffs.
the question is, how to flash the bootloader using fastboot so i can flash the rest and continue/??
Code:
C:\adb>fastboot devices
5072e4de fastboot
C:\adb>fastboot flash boot boot.img
target reported max download size of 268435456 bytes
sending 'boot' (24869 KB)...
OKAY [ 0.784s]
writing 'boot'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.799s
C:\adb>fastboot flash partition gpt_both0.bin
target reported max download size of 268435456 bytes
sending 'partition' (33 KB)...
OKAY [ 0.016s]
writing 'partition'...
FAILED (remote: cannot flash this partition in locked state)
finished. total time: 0.016s
C:\adb>fastboot flash recovery twrp.img
target reported max download size of 268435456 bytes
sending 'recovery' (29968 KB)...
OKAY [ 0.944s]
writing 'recovery'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.952s
C:\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.950s]
booting...
FAILED (remote: unlock device to use this command)
finished. total time: 0.950s
Click to expand...
Click to collapse
:fingers-crossed:
Hi Guys! After brick, my p9l have red "menu" at start and text "Failed verificatnion" or smth like this.
I can't flash TWRP because of FAILED (remote: Command not allowed).
Bootloader & FRP unlocked.
Adb isn't working at bootloader, only fastboot is working.
I want to rollback to 6.0. I have dload with file on my sdcard but i can't flash oeminfo without twrp.
How to fix it?
Code:
E:\tele\SRKToolHuawei-STABLE-V1.3-20160619>FASTBOOT flash recovery EliteTWRP.img
target reported max download size of 471859200 bytes
sending 'recovery' (24452 KB)...
OKAY [ 0.618s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.632s
I want to say sorry for my english :/
Try to flash TWRP with P9 lite toolkit
My OP2 is bricked, just only use fastboot mode, when i use "fastboot oem unlock" command, it show ok & complete, and then offline suddenly.
So i try fastboot mode again, flash recovery, it show the phone is locked.
Can anyone help me ?
C:\WINDOWS\system32>fastboot oem unlock
...
OKAY [ 0.118s]
finished. total time: 0.118s
C:\WINDOWS\system32>fastboot flash recovery c:\twrp-3.2.1-0-oneplus2.img
target reported max download size of 536870912 bytes
sending 'recovery' (22180 KB)...
OKAY [ 0.653s]
writing 'recovery'...
FAILED (remote: device is locked. Cannot flash images)
finished. total time: 0.673s