Need a little help - Nexus 6P Q&A, Help & Troubleshooting

So I was having battery issues with the phone shutting off around 35-38%, so I updated to Android 8.0 same issue, so I contacted Google who told me to contact the manufacturer, I did, they told me to contact Google, Google again told me to contact the manufacturer, no response from them in 3 weeks, during the last week, I started getting "No SIM" I would reboot, it would be fine for a while, now it was doing it up to 4 times a day, until today................today I got the error, rebooted, and then all of my BlueTooth connections were gone, I re-paired them, all is good.,........Then the "n SIM" came up again, rebooted, and now it is stuck at the "G" with the line running at the bottom. I tried restoring from my 8.0 backup, same thing, so then I tried my 7.1.2 back up and it gets stuck at the Google screen with the lock on the bottom.

idbl_fanatic said:
So I was having battery issues with the phone shutting off around 35-38%, so I updated to Android 8.0 same issue, so I contacted Google who told me to contact the manufacturer, I did, they told me to contact Google, Google again told me to contact the manufacturer, no response from them in 3 weeks, during the last week, I started getting "No SIM" I would reboot, it would be fine for a while, now it was doing it up to 4 times a day, until today................today I got the error, rebooted, and then all of my BlueTooth connections were gone, I re-paired them, all is good.,........Then the "n SIM" came up again, rebooted, and now it is stuck at the "G" with the line running at the bottom. I tried restoring from my 8.0 backup, same thing, so then I tried my 7.1.2 back up and it gets stuck at the Google screen with the lock on the bottom.
Click to expand...
Click to collapse
Wipe your phone and reinstall 8.0 full image using the instructions on the Google image web page. When you get back up with working radio, replace your battery if you plan on keeping the phone for a while.

Related

No GSM

Hi, tried a search, no luck.
Tonight I did soft reset on the phone after it hung whilst I tried to make a call.
Now when it boots, I get the message:
No GSM
on the white T-Mobile screen, then two lines down, the WWE version number. Before, I think I had 3 lines of information.
When the phone boots, there is an exclaimation mark next to the Signal meter, and nothing works.
Any ideas apart from:
It's broken, return for repair?
AFAIK it has had no knocks today, and has had nothing done to it recently, no software updates etc. in the last month
Gareth
Try reading this topic, it might help:
http://forum.xda-developers.com/viewtopic.php?t=36730&highlight=
as far as I know the latest rom update fixes this bug (or whatever it is)
Update Problem?
I updated to 1.20.32 Tuesday morning, reset and the system loaded with the GSM
Played around for a while, left it working for almost 2 days.
Then installed the blackberry stuff. Instantly the system is toast again, and I can no longer access the GSM (No GSM printed again).
I am wondering whether there is a blackberry bug which crashed my radio?

No, I DON'T have a voicemail!

I got my HD2 about a week ago, and from the moment I turned it on it's been telling me that I have 1 voicemail waiting. Except that I don't. I've checked my box multiple times just to be certain, nothing in there. I've tried dismissing the notice, it comes back. It constantly displays "1" in the lock screen. I've even flashed a custom ROM (Energy 23569, Jun 8) and it STILL says 1 voicemail waiting! How do I get rid of this phantom voicemail and have it report accurately?
I had that same problem for a while. I just fixed itself after I flashed to a certain energy rom.
I was having the same problem with mine. It was showing that I had a new voicemail from the moment I bought it. I just called T-Mobile and asked them to reset my voicemail box. The girl was very nice and when she tried to explain to me about the new HD2 update they had released, I hinted that I didn't have the stock ROM on my phone and she explained that was totally no problem. They know that with the current technology that people are doing that. She reset my voicemail box and the notification went away. You will have to setup your voicemail again after they reset it, but that takes no time at all.
same this is so annoying! any fixes will be much appreciated.
**** I just found this, might help. I have not tried it yet.
I had the same problem when I got mine. To fix it, all I did was go to the T-Mobile store and ask them for a new SIM card, they did a quick switch and it was gone, but im sure a custom ROM works too

Ascend g300 completely dead

this is for device, ascend g300 (U8815)
I searched for something similar but no result, no surprise for me since the problem is complicated. If it's a bug of cyanomod it cost me 200euros..read below.
The phone had stock ROM ICS. I sent the phone at Huawei service on December 2013, due to damaged receiver (phone couldn't send messages and sometimes call sound was bad). I took it back this Saturday. By the time I take the phone back the warranty was void(1 year passed). I tested the receiver and it was working. So I flashed it on Saturday with cyanomod 10.3. The phone was fully functional for 2 days, with no problems at all, only on the beggining 3 google apps were showing errors, but they were updated and errors stopped.
The 3rd day I decided to switch Number, because I have 2 numbers in one sim, from the same company, 2 in one sim. When I used to do this to my stock rom, I could switch number with no need of restarting the phone. The app that was doing it was called "SIM TOOLKIT", it is system's app. But when I tried doing it with cyanomod 10.3 app asked me to restart the phone to switch to my 2nd number, as I did. The phone was restarted and was working with the 2nd number.
I decided to switch again. Same message appeared "restart is required". This time I IGNORED the message by pressing back button, the window dissapeard and after 1 minute I got message (as always) "switching was succesful". But when I tried call someone, but the phone couldn't call anyone, it was like no sim. The system could see the sim, though. I decided to turn off the phone 2 hours later. Since then it never turned on, no recovery, no initial huawei logo, nothing. I tried plug it to computer,charge,unplug the battery for sometime and plug it again and all the common solutions.
I called my mobile company, they refused to fix it for free, they don't care if it was again at service 2 weeks ago. Huawei service never answer any calls. What to do?
Thanks in Advance.

Brand New N-910C 5.1.1 freezing, help ASAP, Send back and get new one?

I have had two Note 4's but both were on kitkat. One I handed down to my son, and the other I had rooted and running great, but it got stolen out of my car on Christmas Eve. I ordered a brand new 910C and received it yesterday. When I started it I noticed it was running 5.1.1, but no biggie. Basically all I have done with it was restore my messages and contacts through samsung, and was having it re-install all the google apps I wanted to keep. It wanted to install a 95mb update, but I kept telling it no as I didn't have time to research what this update was. I hadn't done anything yet with the phone, it was just downloading google apps. I went to bed, plugged it into the charger, and was lying there reading an article on the internet app. The phone then froze and rebooted. After that, every time it re-started, it would start up then freeze. I tried to get to erase data through the software thinking it downloaded a bad app and I would start again, but it was freezing before I could do it. So then I went into the up arrow, home, power menu. If I was slow in that part, after so many seconds, the phone would freeze. It seems like it may be a hard ware issue freezing after so many seconds. I then was quick about it and first did a erase cache, no luck, then I did a full factory re-set. Now if I try to boot, it just freezes at the Galaxy Note 4 splash screen. Is there anything I can do to fix this, or did I just happen to get a lemon and need to send it back? I would appreciate any timely responses you can give so I can figure out if I need to contact the company I bought the phone from. Thank you everyone.

Bricked Nokia 6 after February update, anyone else?

Hi,
I updated my Nokia 6 early yesterday morning, February 21st. The update was 1,7GB in total, don't know what it consisted of. The update came to my phone through standard automated update check, I got a notification to connect to WiFi, I did, the update downloaded and installed.
Apparently, it was the Android Pie update, though I didn't look that closely.
So, 100% stock ROM, no mods, fully official update method. No tricks. Connected to wall, 100% battery.
After the update the phone booted and asked to reboot to install operator updates. I'm not quite sure the exact wording of the message pop-up, but that's what it asked as far as I can remember. I agreed to reboot, the phone shut down, and never came back to life again.
It won't respond to any key presses. It's completely bricked.
I'm going to get it fixed in a shop, where it'll go to have its display changed anyway. I'm writing this here to ask, has anyone else had troubles with the update? It was rolled out in Finland apparently February 21st or 20th, or then I haven't reacted to the notification before. I'm quite unhappy with the state of the matters, since it seems to be the official update that bricked my phone.
So, anyone had any troubles with Android Pie update?
Mine bricked 2 days ago after the same Android pie update, 1.7 GB. I have tried flashing to no avail. Currently looking for ways to restore a bricked Nokia 6 TA-1021.
rwaithera said:
Mine bricked 2 days ago after the same Android pie update, 1.7 GB. I have tried flashing to no avail. Currently looking for ways to restore a bricked Nokia 6 TA-1021.
Click to expand...
Click to collapse
According to the service personnel, a small wonder happened when they plugged in my TA-1021 - the device started right up. It's quite extraordinary claim, since my phone was connected to my charger when it shut down, and it was showing 100% battery.
I have no reason for this, only speculation. The only explanation I can come up with outside of some divine intervention is, that the phone did not shut down after all. Instead, it was stuck on some loop with screen off and buttons inoperative. When it finally ran out of battery, it responded right away when it received more power.
I did not try and flash my phone myself. Nor did they flash it in the shop. It wasn't necessary, the phone is now fully functional.
Maybe try to plug it in briefly and see what happens. If nothing, then just unplug it again and try another time tomorrow. Btw. HMD Global's chat support was very responsive, so I highly recommend contacting them if you suspect that your case was caused by the updater itself.
Mine didn't get bricked, but it started having issues with Google accounts. After the update, all apps which use my Google account to login had login errors & I couldn't add Google accounts onto the device. I manually synced the account, removed the account & tried to add it again (shows a "sorry something went wrong" message everytime I try to add an account), wiped the cache, even factory reset it, but nothing helped. I finally had to spend some time learning how to downgrade it & was able to add accounts on the device again. But after I updated my device with Android 9 (V6.12) again, the issue came back.
my all google apps arent working on TA-1000
mine is completely bricked. wont turn on at all. TA-1033.
Is there anyway to fix this?

Categories

Resources