Hello guys,
I have Xiaomi Redmi 3S, but it felt to water. After it, phone is hardbricked - I can't enter fastboot mode etc. But... LED is working all the time. LED was green, but when i installed on my PC MiFlash Tool and Qualcomm Drivers (my PC still doesn't detects him) LED is now yellow. Some times phone also vibrates, i don't know why. Screen doesn't work of course.
Don't answer like: "enter fastboot mode" because i can't do it.
Thanks for help
Related
I seem to have hard bricked my Redmi Note 4g.
It does not get detected on my PC.
Nothing loads or shows up on the phone. Its completely dead.
When i connect the cable to my PC the red LED blinks just once. Nothing else.
Please Help
can you goto fastboot mode?
most MTK phones have testpoint where you have to jumping the wire from point A to point B and it will trigger preloader driver in sp flash tool. I didnt know where the point is but you can google it or ask someone in gsmhosting forum.
i have redmi note 4G gucii dual sim, but it's stuck in edl mode all the time, the flash is successful but it's still bricked in edl mode... what's the solution...?
i beg your help..
Finally I bricked the rn4 and reading this thread
Im working in a Mobile shop at Chennai,India.
I Downloaded Rom from Here
Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download
http://en.miui.com/a-234.html
Yesterday a promising/Hopeful customer gave me his Redmi Note 3(32GB) to Unlock the forgotten pattern lock
I started to Flash(without unlocking bootloader)
By reading this Tutorial
http://xiaomitips.com/guide/how-to-flash-miui-fastboot-rom-on-locked-redmi-3/
Mistake by me:-
*To Bypass Bootloader unlock I followed this..
http://forum.xda-developers.com/redmi-note-3/how-to/modified-emmc-file-unlocking-bootloader-t3358486
*To Flash I used Wndows 7 Professional 32-bit but used Normal (Not Beta) MiSetup2.2.0.7032_2717.exe
Downloaded From http://pangu.in/download/Mi_flash_tool_and_drivers.zip
I got an error(I forgot to note that) It says something Maxed size.....
Then My(Customer's) phone is Bricked and When always Blinking with RED Led even Charging and PC connection
Another issue it Connects on Qualcomm Hs USB Diagnosis 900E
But I Managed to connect to Qualcomm HS USB Diagnosis 9008 by Reading this
http://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055
And Created a Deep Flash Cable by Watching This..
https://www.youtube.com/watch?v=TlGil1TV7Vs
Problem starts here I Flashed using
MIFlash Setup Beta from Here
http://en.miui.com/forum.php?mod=at...yMjQ1OTl8MjIyNTI5NjQxNnwyODE5Nzk=&ck=3f95ce0d
Flashing Done!!! But nothing Happens HELP ME Please......
<Sorry I cant Link the URL>
Contact me if I want to give any Credits through WhatsApp: +919566005378
Well, today, I flash a wrong firmware on my RN3 pro RR 5.8.3, unlock unofficially and get brick. No fastboot, No recovery, long press power button only brought splash screen for a second then screen goes black again. When stick to PC only red led blinking, on Device manager show Qualcomm HS-USB Diagnostics 900E so no Miflash.
Okay after a whole morning, I found this method here http://en.miui.com/forum.php?mod=viewthread&tid=266598&highlight=900e.. I tried method 3 from that thread because the other are just unreadable. So here is the step:
1. Plug the phone to PC - Red led blinking
2. Hold both 3 button: Volume up, Volume Down, Power button for around 10s. Phone vibrate and show the Linux Penguin Icon (Qualcom mode)
3. Check in Device manager/Port , it show other (unfortunately not the 9008 as in the thread). I check with Miflash Phone is recognize but i Cant flash any thing
4. SO i tried using this method here (step 4 ) https://forum.xda-developers.com/showpost.php?p=69613342&postcount=3 and get into EDL mode with 9008 port. Voila!
Optional
5. Then I flash this TWRP and unlock officially from here https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778 and the beast is up again ! :highfive:
So i post this here to help anyone stuck in EDL mode and dont have a DFC or dont want to use test point method.
hope this help .
Thanks for sharing.
I already have deep flash cable (btw I made it myself, it is easy) and I have used it some times... But it is good if u don't have the cable!!
Regards!
Thanks a lot for this small post, it saved me from throwing this phone out of the window.
I could update MIUI using fastboot EDL, weirdely enough you cannot update official MIUI without unlocking the bootloader... WTF xiaomi
Saved my ass man thank you i got a real headache from all the failed attempts but u did the job.
my Redmi 4 no response. wat I do now.
when I connect usb cable to phone to pc it's show direct edl mode or Qualcomm Snapdragon 9008 is connected in port .
so what happened it?
wat I do now pls help me.
I had a Redmi 7A and changed for a Redmi 9T. I let the Redmi 7A alone for a long time, and today I took it, but it won't boot. Not only that, but I tried a lot of things like booting into EDL mode, booting into fastboot, disconnecting the battery… But as far as I am, I always get a black screen and ADB or my computer don't recognize it as a phone. I would like to use it to try to install custom ROMs without risking to brick my main phone.
I have some previous threads on my Redmi 7A dead... but no one responded, some did but said I can't fix it, buy a new phone. I am not in a financial condition to buy a new phone. All I can do is fix this phone and continue using it till I get a new phone. But since 3 weeks I am not able to use my Redmi 7A. I was hopeless that this phone could be repaired or could be used again but I went through a few videos on YouTube and saw a ray of hope but still I was helpless I tried booting it into EDL mode using the test point method but nothing worked out. Please I NEED HELP to fix this phone. I have a brief description below of the timeline about how it
crashed, how it was in the service center, what happened after it.
Alright so,
At March 13, It was on AOD (I know it is not supported keep reading), running nusantra os latest version for (Mi-439 aka Redmi 7A, 8) which was last updated on Dec 4, 2022. So when It was on AOD I tried to unlock the phone and it froze. So I rebooted it abnormally. After it was booting it stuck on the Redmi logo but it wasn't going ahead, not showing the boot animation. So I tried to boot it in recovery mode, when it was booting in recovery mode the phone was just shutting down and trying to reboot itself again but it couldn't. So I tried to wipe everything using fastboot commands and the command which I used was -w. So after that instead of waiting at the redmi logo it was stuck in a bootloop, in fact booting in the bootloader (fastboot mode). So after that I lost hope and gave it to the nearby service center. Please note that the phone was turning on before giving it to the service center. After like one day I went there to check if it was done, they say that it's a hardware problem, they are not able to fix it, When I came home the phone didn't boot neither in the fastboot mode nor It was turning on. So I thought it's not charged so I charged it for 1.5 hours but still there was no sign of life. I asked them about the phone not turning on they told me that it's a hardware issue and hung up the phone, said I am in a hurry I will call you later. Till this day I received no call. So Now I am posting this because I see some hope of EDL mode. I even tried to boot it in the EDL mode but still it was neither booting in the EDL mode nor my computer is detecting my phone (I have all the drivers installed). Please help ASAP.
Gibbron1 said:
there was no sign of life
Click to expand...
Click to collapse
1. does the led light up when you charge it?
2. what does you pc device manager show when you plug it in? (do you hear the windows sound?)
try every button combination that is possible. i mean two buttons at the same time, three buttons, all buttons... and for about even up to 1 minute (because this brought my 7A back from just led light when charging to pc detected a usb device)
i can't reproduce your brick but i managed to debrick via edl mode once on a "complete dead" (only led lights up when charging) so i think you can do that too.
also as long as you work with the EDL Tool, deactivate your Firewall (and don't forget to activate it again) just so be sure.
3. are you trying to enter edl mode via adb terminal? i would say you have to open the back cover and enter edl mode via hardware bridge from edl point to ground.
and as far as i can remember you have to be really quick between "starting" (booting) edl mode on the phone and make the phone "accept" edl mode. i think i first made the hardware bridge and then pluged the usb in.
i will dig deeper again in the next few days so i can give you better info's
mYXiao said:
1. does the led light up when you charge it?
2. what does you pc device manager show when you plug it in? (do you hear the windows sound?)
try every button combination that is possible. i mean two buttons at the same time, three buttons, all buttons... and for about even up to 1 minute (because this brought my 7A back from just led light when charging to pc detected a usb device)
i can't reproduce your brick but i managed to debrick via edl mode once on a "complete dead" (only led lights up when charging) so i think you can do that too.
also as long as you work with the EDL Tool, deactivate your Firewall (and don't forget to activate it again) just so be sure.
3. are you trying to enter edl mode via adb terminal? i would say you have to open the back cover and enter edl mode via hardware bridge from edl point to ground.
and as far as i can remember you have to be really quick between "starting" (booting) edl mode on the phone and make the phone "accept" edl mode. i think i first made the hardware bridge and then pluged the usb in.
i will dig deeper again in the next few days so i can give you better info's
Click to expand...
Click to collapse
I bought another phone, but thanks for the reply and help you gave me. My new Phone is Mi A1.