Unbrick Moto X Pure - X Style (Pure) Q&A, Help & Troubleshooting

Hello everybody!
I don't know is there any solution, but maybe you know how to solve it. I recently flashed (i know i'm stupid) nougat retla version of moto x pure with locked bootloader. Got everything erased (suppose it's really hard brick), but bootloader shows everything (bl, baseband, clark XT1575), and i can't reflash stock 6.0. How to solve it, please help me...:crying:

Unlock BL & and flash stock 6+ for your model.
You can also send it for warranty repair. @masterman775

dzidexx said:
Unlock BL & and flash stock 6+ for your model.
You can also send it for warranty repair. @masterman775
Click to expand...
Click to collapse
thanks, but i tried to unlock bootloader, motorola says my device doesn't qualify for bootloader unlocking. Is it complete brick?

This is comon mistake.
masterman775 said:
thanks, but i tried to unlock bootloader, motorola says my device doesn't qualify for bootloader unlocking. Is it complete brick?
Click to expand...
Click to collapse
This is comon mistake. Remember to erase the "(bootloader)" and all spaces from the code that you got from fastboot.
All moto x puré can be unlocked.
Enviado desde mi XT1575 mediante Tapatalk

Not all:
BL status engineering(1) - can't be unlocked. It isn't locked.
For unlock must have:
"Allow oem unlock" - dev options - on.
"Moto device id" - off.

Thank you very much guys for your help, I'll try all the best, I think it's gonna solve everything.:angel::good:

dzidexx said:
Not all:
BL status engineering(1) - can't be unlocked. It isn't locked.
Click to expand...
Click to collapse
Partially true. Contrary to popular believe that a Engineering Bootloader status is some special unlock (like HTC's S-OFF) it's more of a "kind of" unlocked... you cannot flash unsigned images (TWRP or custom ROMs), but you can downgrade with signed images. It is like partially unlocked. But once a device is in Engineering Bootloader mode, we do not have the capability (read as "knowledge") to put it back into Locked or Unlocked state.
I only clarify this because some people try to pass these devices off as special or unlocked, they are NOT the same as a bootloader unlocked device.

acejavelin said:
Partially true. Contrary to popular believe that a Engineering Bootloader status is some special unlock (like HTC's S-OFF) it's more of a "kind of" unlocked... you cannot flash unsigned images (TWRP or custom ROMs), but you can downgrade with signed images. It is like partially unlocked. But once a device is in Engineering Bootloader mode, we do not have the capability (read as "knowledge") to put it back into Locked or Unlocked state.
I only clarify this because some people try to pass these devices off as special or unlocked, they are NOT the same as a bootloader unlocked device.
Click to expand...
Click to collapse
So guys, i tried to unlock it, everything went allright BUT... i can't allow oem unlock without a rom, because it was flashed incorrectly...

dzidexx said:
For unlock must have:
"Allow oem unlock" - dev options - on.
"Moto device id" - off.
Click to expand...
Click to collapse
It's very bad, but i can't do it, i have no rom

What was your last version. Connect to pc and:
fastboot getvar all
@masterman775

masterman775 said:
So guys, i tried to unlock it, everything went allright BUT... i can't allow oem unlock without a rom, because it was flashed incorrectly...
Click to expand...
Click to collapse
What do you mean "everything went alright"? What did you do?

dzidexx said:
What was your last version. Connect to pc and:
fastboot getvar all
@masterman775
Click to expand...
Click to collapse
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.4C
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x2
(bootloader) emmc: 16GB Toshiba REV=07 PRV=00 TYPE=57 PNM=016G72
(bootloader) ram[0]: 3072MB SK Hynix S8 SDRAM DIE=6Gb M5=x6 M6=x3 M7=x0
(bootloader) ram[1]: M8=x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: TA08403R53
(bootloader) cid: 0x0009
(bootloader) channelid: 0x8d
(bootloader) uid: D726E8001E000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 355486060916121
(bootloader) meid:
(bootloader) date: 10-28-2015
(bootloader) sku: XT1575
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Dec 10 5:44:20 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/clark_retus/clark:6.0/MPH
(bootloader) ro.build.fingerprint[1]: S24.49-18-16/8:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.231.16.clark_retu
(bootloader) ro.build.version.full[1]: s.retus.en.US
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband: M8992_1255331.29.01.88.02R SUPER_NA
(bootloader) kernel.version[0]: Linux version 3.10.84-perf-g94afac7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x-goog
(bootloader) kernel.version[2]: le 20140827 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Thu Dec 8 06:11:12 CST 2016
(bootloader) sbl1.git: git=MBM-NG-VA0.4C-0-g07bb07e
(bootloader) rpm.git: git=90a41be
(bootloader) tz.git: git=5fa1c0c-dirty
(bootloader) hyp.git: git=5fa1c0c-dirty
(bootloader) sdi.git: git=52a3f93
(bootloader) pmic.git: git=MBM-NG-VA0.4C-0-g07bb07e
(bootloader) aboot.git: git=MBM-NG-VA0.4C-0-g1fa1c30
(bootloader) qe: qe 0/0
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retus
all: listed above
finished. total time: 0.390s
that's what i've got

acejavelin said:
What do you mean "everything went alright"? What did you do?
Click to expand...
Click to collapse
I got the code to unlock the bootloader, got the token from Motorola, but when i entered fastboot oem unlock *code*, i got a message: "allow oem unlock"

You can try, in this order:
1. Go to recovery mode, wipe data, cache, factory reset, reboot.
2. Flash 24...48-8 without bootloader and gpt.
3. Again 25...LatAm - this one was flashed incorectly? Only for unlocking bootlader.
4. Moto service center.
---------- Post added at 07:06 PM ---------- Previous post was at 07:06 PM ----------
@masterman775

dzidexx said:
You can try, in this order:
1. Go to recovery mode, wipe data, cache, factory reset, reboot.
2. Flash 24...48-8 without bootloader and gpt.
3. Again 25...LatAm - this one was flashed incorectly? Only for unlocking bootlader.
4. Moto service center.
---------- Post added at 07:06 PM ---------- Previous post was at 07:06 PM ----------
@masterman775
Click to expand...
Click to collapse
Yeah man I think second will help... I tried to flash stock with September security patch, which is outdated, maybe my current (18-16 - December patch) version is more actual

Yes but there isn't 48-18 for fastboot. @masterman775

dzidexx said:
Yes but there isn't 48-18 for fastboot. @masterman775
Click to expand...
Click to collapse
I found a decompressed version, now i need to separate it to "sparses"

I think I saw it. Maybe.
You don't need to sparse - fastboot should do it automatically. @masterman775

dzidexx said:
I think I saw it. Maybe.
You don't need to sparse - fastboot should do it automatically. @masterman775
Click to expand...
Click to collapse
So I've tried "unsparsed" variant and "sparsed". I always get pre-flash validation error

If I good remember - uploader also couldn't flash it with locked BL.
Sorry - point 4. @masterman775

Related

Moto X Style (DS) XT1572 bootloader unlocking issue....

hi guys. i have moto x style dualsim XT1572 variant. attempting to unlock its bootloader to further install twrp and custom roms. upon performing the get_unlock_data step i m getting error. i have already enable oem unlocking and usb debugging in developer option. dont know whats wrong ..... one thing i noticed that "Device is Engineering" is mentioned in bootloader details. can i install/flash TWRP without bootloader unlocking ?
Try this https://forum.xda-developers.com/mo...l-windroid-universal-android-toolkit-t3206883
aakashverma0007 said:
Try this https://forum.xda-developers.com/mo...l-windroid-universal-android-toolkit-t3206883
Click to expand...
Click to collapse
not working. the tool booted into bootloader without any issue. upon clicking get unlock key the tool start working and then suddenly an error appears and it crashes.
mkhurram0023 said:
hi guys. i have moto x style dualsim XT1572 variant. attempting to unlock its bootloader to further install twrp and custom roms. upon performing the get_unlock_data step i m getting error. i have already enable oem unlocking and usb debugging in developer option. dont know whats wrong ..... one thing i noticed that "Device is Engineering" is mentioned in bootloader details. can i install/flash TWRP without bootloader unlocking ?
Click to expand...
Click to collapse
So you enter
Code:
fastboot oem get_unlock_data
And you are getting an error? Can you screenshot the error (clearly) or copy and paste the terminal session?
Going to be honest, unless you are doing something incorrectly, there is little we can do... Motorola does have an official forum area for bootloader unlock issues on their support site, although it is a tough to get a response sometimes but this whole mechanism is pretty well locked down to the point that unless it's user error there isn't much we can do.
i am getting below things when i enter "fastboot oem get_unlock_data"
c:\adb>fastboot oem get_unlock_data
. . .
(bootloader) Failed to get unlock data, please try again !
FAILED (remote failure)
finished. total time : 0.013s
c:\adb>
i m unable to post screenshots as i m new use on this forum.
mkhurram0023 said:
i am getting below things when i enter "fastboot oem get_unlock_data"
c:\adb>fastboot oem get_unlock_data
. . .
(bootloader) Failed to get unlock data, please try again !
FAILED (remote failure)
finished. total time : 0.013s
c:\adb>
i m unable to post screenshots as i m new use on this forum.
Click to expand...
Click to collapse
That's fine... Can you copy and paste output of
fastboot getvar all
And mask out your IMEI number (but verify its there), please.
C:\adb>fastboot devices
NX7C3A0096 fastboot
C:\adb>fastboot oem get_unlock_data
...
(bootloader) Failed to get unlock data, please try again!
FAILED (remote failure)
finished. total time: 0.010s
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.4C
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: no
(bootloader) hwrev: 0x82A0
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=01 TYPE=57 PNM=BGND3R
(bootloader) ram[0]: 3072MB Micron S8 SDRAM DIE=6Gb M5=x3 M6=x0 M7=x0 M8
(bootloader) ram[1]: =x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: NX7C3A0096
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0xDEAD
(bootloader) uid: 5C2725001E000000000000000000
(bootloader) unlocked: Not supported
(bootloader) securestate: Engineering
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 1
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue May 2 12:18:43 UTC 2017"
(bootloader) ro.build.fingerprint[0]: motorola/clark_retla_ds/clark_ds:6
(bootloader) ro.build.fingerprint[1]: .0/MPHS24.49-18-8/4:user/release-k
(bootloader) ro.build.fingerprint[2]: eys
(bootloader) ro.build.version.full[0]: Blur_Version.24.221.8.clark_retla
(bootloader) ro.build.version.full[1]: _ds.retla.en.01
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband[0]: M8992_1255331.29.01.88.02p CLARK_LATAM
(bootloader) version-baseband[1]: _DSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.10.84-perf-g2c916d9 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x-goo
(bootloader) kernel.version[2]: gle 20140827 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Fri Sep 23 04:52:36 CDT 2016
(bootloader) sbl1.git: git=MBM-NG-VA0.4C-0-g07bb07e
(bootloader) rpm.git: git=90a41be
(bootloader) tz.git: git=5fa1c0c-dirty
(bootloader) hyp.git: git=5fa1c0c-dirty
(bootloader) sdi.git: git=52a3f93
(bootloader) pmic.git: git=MBM-NG-VA0.4C-0-g07bb07e
(bootloader) aboot.git: git=MBM-NG-VA0.4C-0-g1fa1c30
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (75)
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.235s
C:\adb>
mkhurram0023 said:
(bootloader) unlocked: Not supported
(bootloader) securestate: Engineering
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 1 <-- This is the "Bootloader State"
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
Click to expand...
Click to collapse
Here is your problem in bold above... You device has been reflashed by engineering (ie. Motorola repair/support) and not placed back into a production state, it is in Engineering mode. There is nothing you can do, you should contact Motorola support. We have seen this in the Moto G much more than the X, but it definitely happens sometimes. Most of the time customer service won't know what you are talking about and you will have to go to the Lenovo forums, post about it and wait for a Moto support engineer to respond.
The Bootloader State (mot_sst) should be 0, 2, or 3... never 1... 0 means LOCKED, 2 means RELOCKED (was unlocked, but relocked with 'oem lock' procedure), and 3 means UNLOCKED. A value of 1 means Engineering, and that should never be seen in a production device.
Also, that bootloader date and sku looks messed up (unless you masked that as well), I don't recall seeing other engineering state devices with that. There are some other weird parameters that make me think this device has had problems before too, but they are not as important as what I noted above.
There is nothing you can do, you need to either leave it as is... assuming it is operating normally, or contact Motorola/Lenovo to correct the issue.
EDIT: See this thread for more information: https://forums.lenovo.com/t5/MOTORO...g-and-Unlocked-bootloader-status/td-p/3420219

Moto E4 XT1765 (MetroPcs) Super Hard-Bricked?

Hello Everyone, I was attempting root and well alot of things didn't go as planned and as a result I have no recovery, oem-lock as been enabled and I'm only able to boot into fastboot. a "fastboot getvar all" is as follows
Code:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BA.26(*)
(bootloader) product: perry
(bootloader) board: perry
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE13MB RV=08 PV=0D FV=000000000000000D
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: d6a09b30
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 1
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VBA.26-0-g87d0ac5
(bootloader) qe:
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
all: listed above
finished. total time: 0.323s
Is there anyway back from this? Or is it looking like "get another off ebay, and don't be so [email protected] careless!" Thanks in advance.
tboned82 said:
Hello Everyone, I was attempting root and well alot of things didn't go as planned and as a result I have no recovery, oem-lock as been enabled and I'm only able to boot into fastboot. a "fastboot getvar all" is as follows
Code:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BA.26(*)
(bootloader) product: perry
(bootloader) board: perry
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE13MB RV=08 PV=0D FV=000000000000000D
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: d6a09b30
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 1
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VBA.26-0-g87d0ac5
(bootloader) qe:
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
all: listed above
finished. total time: 0.323s
Is there anyway back from this? Or is it looking like "get another off ebay, and don't be so [email protected] careless!" Thanks in advance.
Click to expand...
Click to collapse
Might start here. I'm not sure and can't look right now myself.
http://www.spflite.com/Index.html?Downloads.html
Sent from my [device_name] using XDA-Developers Legacy app
@tboned82
You haven't unlocked the bootloader. OEM lock is not the proper command. You can't just do oem unlock either. You have to get an unlock code from Motorola. You haven't said what you actually did, what happened, what guide you followed, how far you got, nothing.
You have to give some info before anyone can help you.
madbat99 said:
@tboned82
You haven't unlocked the bootloader. OEM lock is not the proper command. You can't just do oem unlock either. You have to get an unlock code from Motorola. You haven't said what you actually did, what happened, what guide you followed, how far you got, nothing.
You have to give some info before anyone can help you.
Click to expand...
Click to collapse
Oh but I have unlocked the bootloader, I got a code and everything I followed all the instructions on this guide
HTML:
https://forum.xda-developers.com/moto-e4/moto-e4-qualcomm-roms-kernels-recoveries--other-development/guide-xt1766-stock-firmware-restoration-t3775347
as well as this one as well
HTML:
https://forum.xda-developers.com/moto-e4/how-to/complete-noob-guide-to-rooting-metropcs-t3701234
I ran into trouble when I formatted /data partition (just wiped it clean, without a way to boot into the system) I then followed the guide in the first link and I'm where I'm at now it's when I downloaded the files from the first link and started issuing the given commands in when oem-unlock when away and it was locked again. But yes I did have the device oem unlocked at one point.
whodisname said:
Might start here. I'm not sure and can't look right now myself.
http://www.spflite.com/Index.html?Downloads.html
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
I have done this, without success...I'm just using windows in a Virtual enviroment, though I'm able to access fastboot commands in both my virtualized windows enviroment and my native Manjaro one as well.
tboned82 said:
I have done this, without success...I'm just using windows in a Virtual enviroment, though I'm able to access fastboot commands in both my virtualized windows enviroment and my native Manjaro one as well.
Click to expand...
Click to collapse
Glad you started a thread on this. There is a way out of this.
@kartik verma has a guide that can help you out on this. Since your bootloader is locked again it won't matter if you run the command to lock it back. However, with our variant you might have some trouble, so READ CAREFULLY steps 1-3.
https://forum.xda-developers.com/moto-e4/how-to/moto-e4-guide-stock-firmware-restore-t3661684
Things You Should Know Going Into It:
1. On our variant when you try to erase anything via fastboot is will say "PERMISSION DENIED". Run the command anyway and see what I mean - so you can effectively skip the ERASE PART of the guide. Instead, go straight to reinstalling over the files already there. It does that even when the bootloader is unlocked, and I have no idea why.
2. Download the firmware officially from Motorola from here:https://firmware.center/firmware/Motorola/Moto E4/Stock/ From there, download the following PERRY_METROPCS_C_7.1.1_NCQ26.69-46_cid22_subsidy-MPCS_regulatory-DEFAULT_CFC.xml.zip. It's the earliest one I know of that came on my phone that will not give you any problems flashing Magisk v14 later once you restore. Very important.
3. Extract the firmware to a single folder to your desktop. Makes it easier navigating later.
4. Download Minimal ADB and Fastboot. Don't use any other Fastboot. Trust and believe, its easier; Save Minimal ADB and Fastboot to your C:/ Drive.
5. In order to flash the files accordingly, you are going to have to pull firmware individual files (i.e. boot.img and system sparschunk files) to the Minimal ADB folder. Keep track of them.
6. You really only need to follow steps 1-3. Don't go past there.
---------- Post added at 03:52 AM ---------- Previous post was at 03:45 AM ----------
In my case when my phone hard bricked (wouldn't boot past recovery splash or the N/A splash) I could still get to fastboot. I flashed boot.img, and ALL of the system sparse chunk files. That brought me back enough to load recovery and delete everything and flash anew. However, If you think you've deleted the system, plus your bootloader is locked again you're probably going to have to reflash all of those files. I'd say as long as you have fast boot, reflash through fastboot boot.img, and every single system_sparsechunk files. Reboot and see what happens. If it doesn't work, keep on flashing until you re-restore the phone completely. If you start getting errors, refer to the rest of kartik's guide. (Steps 4- to completion) and ask me questions. There really isn't a definitive one size fits all variants for this phone - ours is special.
---------- Post added at 04:06 AM ---------- Previous post was at 03:52 AM ----------
Here is my getvar for you to see in comparison (I blocked off sensitive info like my IMEI and UID)
Code:
Minimal ADB and Fastboot>fastboot getvar all
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BA.09(*)
(bootloader) product: perry
(bootloader) board: perry
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZY224GRCFF
(bootloader) cid: 0x0016
(bootloader) channelid: 0x8e
(bootloader) uid: ********00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: *classified by order of your government*
(bootloader) meid:
(bootloader) date: 09-13-2017
(bootloader) sku: XT1765
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint[0]: motorola/perry_metropcs_c/perry:7.
(bootloader) ro.build.fingerprint[1]: 1.1/NCQ26.69-46/46:user/release-ke
(bootloader) ro.build.fingerprint[2]: ys
(bootloader) poweroffalarm: 1
(bootloader) ro.build.version.full[0]: Blur_Version.26.11.46.perry_metro
(bootloader) ro.build.version.full[1]: pcs_c.MetroPCS.en.US
(bootloader) ro.build.version.qcom: LA.UM.5.6.r1-03800-89xx.0
(bootloader) version-baseband: M8917TMO_18.08.04.12R PERRY_NA_UMTS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.31-perf-g9acc907-0000
(bootloader) kernel.version[1]: 6-g486eb8a ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.8 (GCC) ) #1 SMP PREEMPT Tue Jun
(bootloader) kernel.version[3]: 20 09:51:52 CDT 2017
(bootloader) sbl1.git: git=MBM-NG-VBA.09-0-ge2011ab
(bootloader) rpm.git: git=MBM-NG-VBA.09-0-gc6ac81e
(bootloader) tz.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) devcfg.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) keymaster.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) cmnlib.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) cmnlib64.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) prov.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) aboot.git: git=MBM-NG-VBA.09-0-gcae5764-dirty
(bootloader) qe: qe 1/1
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: metropcs
Well I was hoping to return with a success story, unfortunately that's not the case, I have tried many times on both my Linux and virtualized Windows environment of flashing files from the provided link without luck, as a result of the oem_lock bit being mysteriously reset, (actually upon googling "Failed to initialize partition table" I've found many results, mostly relating to the Moto G4 with others experiencing the same mysterious relocking issue I have)
Since I was getting nowhere very slowly via Fastboot I had started looking elsewhere for a solution and came upon Blankflash (initialized my issuing "fastboot oem blankflash" and operated via the "Qpst" Software squite) which looks very promising except for our stock (and most others actually) firmware files not including the necessary prog_emmc_firehose_8917.mbn files nor the rawprogram.xml files either (
HTML:
https://forum.xda-developers.com/watch-2/development/rom-bootloader-recover-huawei-watch-2-t3624657/post72744084#post72744084
short but alot of useful information on this method... and despite the generic naming of the firehose.mbn files I found they are very device specific I'm currently looking to see if there's a way to extract the information required from the stock Moto Firmware we currently have access to and covert them to the format required my Qfil, but information on flashing through the Qualcomm software is hard to track down.
Through my research I also came across some very interesting exploits that would also solve the flashing issues I'm having https://alephsecurity.com/2018/01/22/qualcomm-edl-2/ but (in my opinion) the methods of carrying out the exploits isn't explained very well, and as I don't understand assembly language am hesitant to experiment with.
My Questions
1. Does anyone have experience flashing through the Qpst suite and be able and willing to help with this?
2. Anyone with enough knowledge of assembly/programming to be able to write code for my device that'll disable the boot locking bit enabling me to flash the already provided Moto Firmware via Fastboot?
Thanks for anyone that takes their time into looking into this for me
tboned82 said:
Well I was hoping to return with a success story, unfortunately that's not the case, I have tried many times on both my Linux and virtualized Windows environment of flashing files from the provided link without luck, as a result of the oem_lock bit being mysteriously reset, (actually upon googling "Failed to initialize partition table" I've found many results, mostly relating to the Moto G4 with others experiencing the same mysterious relocking issue I have)
Since I was getting nowhere very slowly via Fastboot I had started looking elsewhere for a solution and came upon Blankflash (initialized my issuing "fastboot oem blankflash" and operated via the "Qpst" Software squite) which looks very promising except for our stock (and most others actually) firmware files not including the necessary prog_emmc_firehose_8917.mbn files nor the rawprogram.xml files either (
HTML:
https://forum.xda-developers.com/watch-2/development/rom-bootloader-recover-huawei-watch-2-t3624657/post72744084#post72744084
short but alot of useful information on this method... and despite the generic naming of the firehose.mbn files I found they are very device specific I'm currently looking to see if there's a way to extract the information required from the stock Moto Firmware we currently have access to and covert them to the format required my Qfil, but information on flashing through the Qualcomm software is hard to track down.
Through my research I also came across some very interesting exploits that would also solve the flashing issues I'm having https://alephsecurity.com/2018/01/22/qualcomm-edl-2/ but (in my opinion) the methods of carrying out the exploits isn't explained very well, and as I don't understand assembly language am hesitant to experiment with.
My Questions
1. Does anyone have experience flashing through the Qpst suite and be able and willing to help with this?
2. Anyone with enough knowledge of assembly/programming to be able to write code for my device that'll disable the boot locking bit enabling me to flash the already provided Moto Firmware via Fastboot?
Thanks for anyone that takes their time into looking into this for me
Click to expand...
Click to collapse
I'm just getting a notification about this now. Sorry about that. Did you ever unbrick the phone?
To answer your questions, I'm not hip to the Qpst suite. If flashing everything back in Command Prompt on windows didn't work, you may have very well bricked it.
Articul8Madness said:
I'm just getting a notification about this now. Sorry about that. Did you ever unbrick the phone?
To answer your questions, I'm not hip to the Qpst suite. If flashing everything back in Command Prompt on windows didn't work, you may have very well bricked it.
Click to expand...
Click to collapse
i have brick Moto E4 XT 1765
CPU MSM 8917
metropcs
please help me, flash.bat not work i have trying lots of methood but not success
Mirani said:
i have brick Moto E4 XT 1765
CPU MSM 8917
metropcs
please help me, flash.bat not work i have trying lots of methood but not success
Click to expand...
Click to collapse
I'll try.
Please, in GREAT DETAIL, tell me everything you did to brick it. Step by step. And if you can, tell me the original baseband on the phone. Once I have that I can tell you better how to proceed.
Moto E4 XT 1765 hard brick
Articul8Madness said:
I'll try.
Please, in GREAT DETAIL, tell me everything you did to brick it. Step by step. And if you can, tell me the original baseband on the phone. Once I have that I can tell you better how to proceed.
Click to expand...
Click to collapse
i have unlock boot loader working fine on stock firmware version
NCQ 26.69.46_cid22_subsidy-MPCS_regulatory. but not rooted working charm, after few day i have connected on wifi server suddenly i have received pop up OTA new security patch ready for install i have just installed this patch and my mobile going installing, then erasing after that now not showing anything i have hard brick my own phone with my little negligence.
when i connected to pc just tray icon show HS_USB_Qdloader 9008 and only detected by flash.bat and Qualcomm Snapdragon Flash Tool
plz help me out this headache
Mirani said:
i have unlock boot loader working fine on stock firmware version
NCQ 26.69.46_cid22_subsidy-MPCS_regulatory. but not rooted working charm, after few day i have connected on wifi server suddenly i have received pop up OTA new security patch ready for install i have just installed this patch and my mobile going installing, then erasing after that now not showing anything i have hard brick my own phone with my little negligence.
when i connected to pc just tray icon show HS_USB_Qdloader 9008 and only detected by flash.bat and Qualcomm Snapdragon Flash Tool
plz help me out this headache
Click to expand...
Click to collapse
Let me see if I have this correctly.
You had a stock rom on your phone which you mentioned NCQ.
Then you connected your phone to the wifi.
Then you of your own volition took an update.
This update erased whatever you did trying to get root.
Then your phone bricked.
Now when you attach it to a PC it is showing HS_USB_Qdloader 9008
Is that right?
You need to pull the following firmware and try and flash it...PERRY_METROPCS_C_7.1.1_NCQ26.69-46_cid22_subsidy-MPCS_regulatory-DEFAULT_CFC.xml
I've never heard of your firmware. Try that firmware and flash it piece by piece and see if that gets you back working.
Hello, the same problem xt1765 metropcs HS_USB_Qdloader 9008, with that tool will get the firmware? Does not enter fastboot, help
If The phone does not enter fastboot mode you can only fix it by flashin the original stock firmware using SP flash tools and thr correct scatter fileusing format all including formatting the bootloader
TheLastAlphaUK said:
If The phone does not enter fastboot mode you can only fix it by flashin the original stock firmware using SP flash tools and thr correct scatter fileusing format all including formatting the bootloader
Click to expand...
Click to collapse
Again you are answering people with facts about the mediatek version, these ones have the Qualcomm version, therefore, SPflash tool does not apply
My bad cant I use the ADB sideload or update commands to reflash a stock firmware package. ? In kinda in a rush trying to answer all these questions I will look at it when I can sorry

Moto X Pure Edition (style) 2015 | XT1572 Retasia Got Stuck at bootloader

Hi There , Idont Know How To Say This In Normal Way But Idont know How , So I Will Go Right Through The Problem
I Got This Moto X Pure Edition (style) X1572 | Retasia
And It Was On Android 5 On Locked
I Didn't Know I Have To unlock It Before Flashing So It's Lock
so I Tried To Update The Phone With Frimware That I Grabbed For Frimeware Center But It Was The Wrong Region( La )So I Tried Another (Eu)
Then I Found The Right Region By This Code : fastboot Getvar All and I Found That My Phone Is For Asia but I Can't Flash it because Of Gpt Partiton or bootloader Or Boot ، every Time I get the same errors
To sum up i want These Questions Answered
1 - is There any File For Region Asia With Android 7
2 - does my Phone Supports Deep Flash Cable Or Can I Flash it with Deep Flash Cable and How I Make Deep Flash Cable For Moto
3 - If I Couldn't Flash it Can It be flashed With a Box (like z3x for Samsung)
Please Help as Fast As You Can Im In deep Pain By This Phone and the Phone isn't mine I have to Return it By Tomorrow (1/8/2018) so Please Help To Solve This Problem Thanks
Normally, we should unlock bootloader before flashing firmware.
With unlocked bootloader, you can flash firmware from other regions, low android version (5) to higher one (6 or 7).
When flashing a different region firmware, you should make a factory reset via Recovery.
You should give more infomation about the state of the phone: can enter bootloader, recovery mode or not; can turn on screen or not; how the PC shows when the phone is connected to PC.....
mr_5kool said:
Normally, we should unlock bootloader before flashing firmware.
With unlocked bootloader, you can flash firmware from other regions, low android version (5) to higher one (6 or 7).
When flashing a different region firmware, you should make a factory reset via Recovery.
You should give more infomation about the state of the phone: can enter bootloader, recovery mode or not; can turn on screen or not; how the PC shows when the phone is connected to PC.....
Click to expand...
Click to collapse
Hi My Phone Is On And Its Locked On Bootloader (State Is Locked) I Couldn't Flash Any Frimware My Phone Region Is Asia I Cant Enter Recovery Mode PC And PC Shows It In Fastboot Mode
By The Way Is There Any Way To Put This Phone On Test Point Or EDL?
When you connect the phone to PC, if it turns on and enters fastboot mode (the screen turns on, and you can see the android and phone information), it is reflashable. But the bootloader is needed to unlock (you can google this problem, it's easy to perform). Then you go to firmware.center, find rom Asia with android 7 and flash it to the phone.
If the lcd is not on when you connect to PC, here is the method: https://forum.xda-developers.com/moto-x-style/help/solved-hard-brick-moto-x-style-xt1572-t3693860
mr_5kool said:
When you connect the phone to PC, if it turns on and enters fastboot mode (the screen turns on, and you can see the android and phone information), it is reflashable. But the bootloader is needed to unlock (you can google this problem, it's easy to perform). Then you go to firmware.center, find rom Asia with android 7 and flash it to the phone.
If the lcd is not on when you connect to PC, here is the method: https://forum.xda-developers.com/moto-x-style/help/solved-hard-brick-moto-x-style-xt1572-t3693860
Click to expand...
Click to collapse
It turns on and boots to bootloader but I tried to unlock the bootloader but it says you should allow bootloader oem unlock in developer options , and I can't access that obviously
So you can try to flash the firmware without flashing gpt.bin; bootloader.img; boot.img; recovery.img
Or you can try to make an sdcard like the link I mentioned before. Insert it to the phone and try to flash the firmware then.
mr_5kool said:
So you can try to flash the firmware without flashing gpt.bin; bootloader.img; boot.img; recovery.img
Or you can try to make an sdcard like the link I mentioned before. Insert it to the phone and try to flash the firmware then.
Click to expand...
Click to collapse
This the problem I tried every rom I cloud but none of it worked
If the phone can enter bootloader, the easiest way is to flash the newest firmware to the phone for both situations: locked or unlocked bootloader. My Verizon Droid Turbo had been soft-bricked when it was on Android 5. When android 6 came, it resurrected.
If a firmware is successfully flashed to the phone, it can start up normally or be stuck at logo. If it is stuck, enter recovery mode and factory reset.
There is one last method with super high risk: break the bootloader then resurrected by sdcard. One of my phone has died before, so never use this method if you don't have experience.
I mentioned everything I know. If your phone does not start, you may need another one.
I'm sorry that it does not help
Can Any Buddy Find The Right Frimware Based On This Info For Me I Need It ASAP Thanks
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.52
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Samsung REV=07 PRV=01 TYPE=57 PNM=AGND3R
(bootloader) ram[0]: 3072MB SK Hynix S8 SDRAM DIE=6Gb M5=x6 M6=x3 M7=x0
(bootloader) ram[1]: M8=x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: TA08305BXS
(bootloader) cid: 0x0007
(bootloader) channelid: 0x52
(bootloader) uid: B02FEA001E000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 352342070733563
(bootloader) meid:
(bootloader) date: 12-24-2015
(bootloader) sku: XT1572
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Jul 28 3:15:52 UTC 2018"
(bootloader) ro.build.fingerprint[0]: motorola/clark_retasia_ds/clark_ds
(bootloader) ro.build.fingerprint[1]: :5.1.1/LPH23.116-18/22:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.full[0]: Blur_Version.23.21.18.clark_retas
(bootloader) ro.build.version.full[1]: ia_ds.retasia.en.03
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband[0]: M8992_1255309.10.01.68R FSG-8994-01.71
(bootloader) version-baseband[1]: _CLARK_EMEA_DSDS_CUST+SW_DFLT
(bootloader) kernel.version[0]: Linux version 3.10.49-perf-ge36128e (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x-goog
(bootloader) kernel.version[2]: le 20140827 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Thu Jul 30 14:36:15 CDT 2015
(bootloader) sbl1.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) rpm.git: git=90a41be
(bootloader) tz.git: git=2d08904-dirty
(bootloader) hyp.git: git=2d08904-dirty
(bootloader) sdi.git: git=d9f358f
(bootloader) pmic.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) aboot.git: git=MBM-NG-VA0.52-0-g69ca042
(bootloader) qe: qe 0/0
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retmea
all: listed above
finished. total time: 0.116s

SIM not found after flash stock 7.0

Hi.
I have flashed my moto x style mt1572 single sim using this guide:
https://forum.xda-developers.com/moto-x-style/general/guide-flashing-stock-firmware-t3637235
and this stock rom:
XT1572_CLARK_RETLA_DS_7.0_NPHS25.200-15-8_cid12_subsidy-DEFAULT_CFC.xml.zip
after flashing complete i get no sim slot detected. i was installed for dual sim device. then i installed the correct one:
XT1572_CLARK_RETLA_7.0_NPH25.200-15_cid12_subsidy-DEFAULT_CFC.xml.zip
i dont know what is the correct model for my device, but since there is just 2 stock firmware with android 7.0 and i was have this version in my OTA update, so i think this is the correct ROM.
but after installing this one, i got same problem. my baseband not found and IMEI is unknown.
i tried many solution that i found but doesnt work.
Did it fix if i flash a custom ROM??
sorry for my english.
thanks.
help me
any one can help me please????
One thing I discovered when tinkering with randomblame's LineageOS build is that when I flashed the Android 7 ROM on my Moto X Pure the modem did not properly install despite fastboot reporting success in flashing. I had to repeat flash it some five or six times before the SIM would be correctly detected as a GSM SIM so I could set the APN. I would try flashing the correct baseband for your device again, but repeatedly flash it as I did for the Moto X I have here.
Strephon Alkhalikoi said:
One thing I discovered when tinkering with randomblame's LineageOS build is that when I flashed the Android 7 ROM on my Moto X Pure the modem did not properly install despite fastboot reporting success in flashing. I had to repeat flash it some five or six times before the SIM would be correctly detected as a GSM SIM so I could set the APN. I would try flashing the correct baseband for your device again, but repeatedly flash it as I did for the Moto X I have here.
Click to expand...
Click to collapse
Hi.
thanks for your solution.
i am in trying fix it in last 3 days and i cant.
first i want to be sure that the ROM that i flashed is the correct one.
base on i was received the android 7.0 before and i have XT1572 single SIM, is it possible that the mentioned ROM is incorrect??
i have flashed LineageOS 14.1 but it freeze on logo and i can't try it. but i don't guess my problem fix by it at all.
OK now, your solution is that i flash my modem several times after i flashed the stock ROM?? this is mean that i repeat these commands ?? or just the (*) one?
Code:
fastboot flash modem NON-HLOS.bin *
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
edit:
this is my fastboot getvar all if it helps!
Code:
PS C:\Users\Yasser\Desktop> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.52
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=02 TYPE=57 PNM=BWBD3R
(bootloader) ram[0]: 3072MB SK Hynix S8 SDRAM DIE=6Gb M5=x6 M6=x3 M7=x0
(bootloader) ram[1]: M8=x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: TA39101VSV
(bootloader) cid: 0x0007
(bootloader) channelid: 0x42
(bootloader) uid: 52C1EA001E000000000000000000
(bootloader) unlocked: yes
(bootloader) securestate: unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 358951060751668
(bootloader) meid:
(bootloader) date: 02-03-2016
(bootloader) sku: XT1572
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Apr 11 21:18:11 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/clark_retla/clark:7.0/NPH
(bootloader) ro.build.fingerprint[1]: 25.200-15/14:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.25.11.15.clark_retla
(bootloader) ro.build.version.full[1]: .retla.en.01
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.10.84-perf-g6ed6ce8-0000
(bootloader) kernel.version[1]: 4-gfc58252 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.9 20150123 (prerelease) (GCC) ) #
(bootloader) kernel.version[3]: 1 SMP PREEMPT Wed May 10 09:12:54 CDT 20
(bootloader) kernel.version[4]: 17
(bootloader) sbl1.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) rpm.git: git=90a41be
(bootloader) tz.git: git=2d08904-dirty
(bootloader) hyp.git: git=2d08904-dirty
(bootloader) sdi.git: git=d9f358f
(bootloader) pmic.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) aboot.git: git=MBM-NG-VA0.52-0-g69ca042
(bootloader) qe: qe 0/0
(bootloader) frp-state: protected (75)
(bootloader) ro.carrier: retfr
edit2:
i always receive this message after each command: (bootloader) has-slot:modem: not found
like below:
Code:
PS F:\rom> fastboot flash modem NON-HLOS.bin
(bootloader) has-slot:modem: not found
Sending 'modem' (41723 KB) OKAY [ 0.924s]
Writing 'modem' OKAY [ 1.103s]
Finished. Total time: 2.040s
is this normal ??
thanks.
yasser93 said:
i always receive this message after each command: (bootloader) has-slot:modem: not found
like below:
is this normal ??
Click to expand...
Click to collapse
Slot not found errors are normal. Current versions of fastboot are designed for devices with seamless updates, and the Moto X doesn't have them.
Repeat flashing the modem means just the command "fastboot flash modem NON-HLOS.bin". You don't want to erase the partitions at all in doing this. Flashing the FSG is also not necessary.
Strephon Alkhalikoi said:
Slot not found errors are normal. Current versions of fastboot are designed for devices with seamless updates, and the Moto X doesn't have them.
Repeat flashing the modem means just the command "fastboot flash modem NON-HLOS.bin". You don't want to erase the partitions at all in doing this. Flashing the FSG is also not necessary.
Click to expand...
Click to collapse
I do it several times but nothing happens. is any other solution is exist???
thanks
yasser93 said:
I do it several times but nothing happens. is any other solution is exist???
Click to expand...
Click to collapse
Contact Lenovo.
Strephon Alkhalikoi said:
Contact Lenovo.
Click to expand...
Click to collapse
I do not know if i could share this link, but this is their answer
https://forums.lenovo.com/t5/Moto-X-Pure-Moto-X-Style/SIM-not-found-after-flash-stock-7-0/td-p/4404682
I don't see why sharing the link wouldn't be allowed. Nevertheless, the forums was not what I meant when I said to contact Lenovo. At this point the phone will likely need servicing at a Lenovo service center, and with the phone out of warranty that is something you have to pay for.
Finally Solved!!
i can't believe it. While I was completely disappointed, it fixed by simply flash this modem:
https://forum.xda-developers.com/moto-x-style/general/stock-xt-1572-reteu-7-0-ddumped-files-t3712521
:victory::victory::victory::victory::fingers-crossed::fingers-crossed::fingers-crossed::laugh::laugh:
hi there,
i have the same problem. my sister Huawei y9 prime is locked and she is no longer with us
what can i do to unlock it?
this is my email: [email protected]
help appreciated,

Restore xt1965-t

I have an xt1965-t, not the t-mobile specific version.
I installed Lineage. It currently has the lineage recovery on it. It isn't rooted.
Is it possible to completely restore it to it's factory state? There is no data on it that needs to be preserved.
rob.aberth said:
I have an xt1965-t, not the t-mobile specific version.
I installed Lineage. It currently has the lineage recovery on it. It isn't rooted.
Is it possible to completely restore it to it's factory state? There is no data on it that needs to be preserved.
Click to expand...
Click to collapse
(Lenovo) MOTO Smart Assistant (PC)
sd_shadow said:
(Lenovo) MOTO Smart Assistant (PC)
Click to expand...
Click to collapse
I tried that but it doesn't seem to support this phone. It detects the phone but can't match a firmware to it.
rob.aberth said:
I tried that but it doesn't seem to support this phone. It detects the phone but can't match a firmware to it.
Click to expand...
Click to collapse
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
I am not sure I am seeing the firmware for my phone unless I am missing something.
Here is the device info:
Spoiler
Code:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-lake_retail-38523c9489-200929
(bootloader) product: lake
(bootloader) board: lake
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: TMO
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DH6DAB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM636 1.0 (2)
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1b
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: disabled (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) meid:
(bootloader) date: 11-05-2020
(bootloader) sku: XT1965-T
(bootloader) carrier_sku: XT1965-T
(bootloader) battid: SB18C53460
(bootloader) battery-voltage: 4393
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/lake_n/lake_n:10/QPW30.61
(bootloader) ro.build.fingerprint[1]: -21-18-4/67563:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.8.2.r1-04300-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.192-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (gcc version 4.9.x 20150123 (
(bootloader) kernel.version[2]: prerelease) (GCC) ) #1 SMP PREEMPT Tue S
(bootloader) kernel.version[3]: ep 29 19:00:13 CDT 2020
(bootloader) git:abl: MBM-3.0-lake_retail-38523c9489-200929
(bootloader) git:xbl: MBM-3.0-lake_retail-efaf0cccb-200929
(bootloader) git:pmic: MBM-3.0-lake_retail-efaf0cccb-200929
(bootloader) git:rpm: MBM-3.0-lake_retail-0dc899d-200929
(bootloader) git:tz: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:hyp: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:devcfg: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:cmnlib: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:cmnlib64: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:keymaster: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:prov: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:storsec: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retla
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 5
It seems like I should look in the 'lake' 'retla' directory but the only firmware there is for the xt1965-2. I am thinking about it wrong?
rob.aberth said:
I have an xt1965-t, not the t-mobile specific version.
I installed Lineage. It currently has the lineage recovery on it. It isn't rooted.
Is it possible to completely restore it to it's factory state? There is no data on it that needs to be preserved.
Click to expand...
Click to collapse
Seems unlikely you have an XT-1965-T that is not T-mobile.
https://mirrors.lolinet.com/firmware/moto/lake/official/TMO/
even if that is the case it should be ok using TMO firmware with bootloader unlocked.
Also there is a Moto G7 Plus Forum
Moto G7 Plus
The Moto G7 Plus is a 6.2" phone with a 1080 x 2270p display. The Snapdragon 636 is paired with 4GB of RAM and 64GB of storage. The main camera is 16MP and the selfie camera is 5MP. The battery has a 3000mAh capacity.
forum.xda-developers.com
rob.aberth said:
I am not sure I am seeing the firmware for my phone unless I am missing something.
Here is the device info:
Spoiler
Code:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-lake_retail-38523c9489-200929
(bootloader) product: lake
(bootloader) board: lake
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: TMO
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DH6DAB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM636 1.0 (2)
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1b
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: disabled (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) meid:
(bootloader) date: 11-05-2020
(bootloader) sku: XT1965-T
(bootloader) carrier_sku: XT1965-T
(bootloader) battid: SB18C53460
(bootloader) battery-voltage: 4393
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/lake_n/lake_n:10/QPW30.61
(bootloader) ro.build.fingerprint[1]: -21-18-4/67563:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.8.2.r1-04300-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.192-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (gcc version 4.9.x 20150123 (
(bootloader) kernel.version[2]: prerelease) (GCC) ) #1 SMP PREEMPT Tue S
(bootloader) kernel.version[3]: ep 29 19:00:13 CDT 2020
(bootloader) git:abl: MBM-3.0-lake_retail-38523c9489-200929
(bootloader) git:xbl: MBM-3.0-lake_retail-efaf0cccb-200929
(bootloader) git:pmic: MBM-3.0-lake_retail-efaf0cccb-200929
(bootloader) git:rpm: MBM-3.0-lake_retail-0dc899d-200929
(bootloader) git:tz: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:hyp: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:devcfg: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:cmnlib: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:cmnlib64: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:keymaster: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:prov: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) git:storsec: MBM-3.0-lake_retail-a1c95bed3-dirty-200929
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retla
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 5
It seems like I should look in the 'lake' 'retla' directory but the only firmware there is for the xt1965-2. I am thinking about it wrong?
Click to expand...
Click to collapse
You have 2 conflicting lines
Code:
radio: TMO
ro.carrier: retla
If you are in the USA flash the TMO
If you are not in the USA flash the RetLA
If you flash the RetLA and you cannot connect to your carrier
Flash this from TMO
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
sd_shadow said:
Seems unlikely you have an XT-1965-T that is not T-mobile.
Click to expand...
Click to collapse
As I understand it the the phone was originally made by Motorola for t-mobile and sold as the Revvlry+. Recently, Motorola started selling them as the US version of the Moto g7 plus. Hardware wise I think they are identical.
sd_shadow said:
If you are in the USA flash the TMO
Click to expand...
Click to collapse
If I flash the TMO will it turn it into a revvlry+ and load all the t-mobile "stuff"?
rob.aberth said:
As I understand it the the phone was originally made by Motorola for t-mobile and sold as the Revvlry+. Recently, Motorola started selling them as the US version of the Moto g7 plus. Hardware wise I think they are identical.
If I flash the TMO will it turn it into a revvlry+ and load all the t-mobile "stuff"?
Click to expand...
Click to collapse
yes see post #8
sd_shadow said:
yes see post #8
Click to expand...
Click to collapse
So, I apologize if this a silly question since I am brand new to this but what I need to do if I understand from that post is follow all the instructions for flashing the retla and then before issuing the reboot I execute the 4 commands in post #8 but using the file versions from the tmo version. Is that right?
rob.aberth said:
So, I apologize if this a silly question since I am brand new to this but what I need to do if I understand from that post is follow all the instructions for flashing the retla and then before issuing the reboot I execute the 4 commands in post #8 but using the file versions from the tmo version. Is that right?
Click to expand...
Click to collapse
The radio commands can be flashed later.
sd_shadow said:
The radio commands can be flashed later.
Click to expand...
Click to collapse
In fact you can just skip these RetLA radio commands
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Then it shouldn't be an issue.
So...I was just about to start when I noticed that sparse chunks are bigger than my max-sparse-size. Is that something to worry about?
OK, thanks for all your help.
I went ahead and just tried it even with the max-sparse-size mismatch. It seems to have worked. The phone boots, connect to the mobile network and generally functions as factory new. I was also able to relock the bootloader.
The only issue is that remains is when the phone boots I get a nasty looking error message that reads: "Your device has loaded another operating system".
Is there any way to remove that or do I just have to live with it?
rob.aberth said:
OK, thanks for all your help.
I went ahead and just tried it even with the max-sparse-size mismatch. It seems to have worked. The phone boots, connect to the mobile network and generally functions as factory new. I was also able to relock the bootloader.
The only issue is that remains is when the phone boots I get a nasty looking error message that reads: "Your device has loaded another operating system".
Is there any way to remove that or do I just have to live with it?
Click to expand...
Click to collapse
Not likely.
You could try LMSA again.
But LMSA may be confused with the RetLA channel and the TMO radio
rob.aberth said:
OK, thanks for all your help.
I went ahead and just tried it even with the max-sparse-size mismatch. It seems to have worked. The phone boots, connect to the mobile network and generally functions as factory new. I was also able to relock the bootloader.
The only issue is that remains is when the phone boots I get a nasty looking error message that reads: "Your device has loaded another operating system".
Is there any way to remove that or do I just have to live with it?
Click to expand...
Click to collapse
Hi, I have the exact same device as you.
1) Did you just flash the full RETLA (XT1965-2) firmware from LoLinet? as-is? or did you need to modify radio stuff?
2) There apparently is a method to mask the nag message of "another operating system". It is to flash another modified logo . There a a couple discussions about it. Here is 1. https://forum.xda-developers.com/t/bootlogo-modded-bootlogo-from-unlocked-bootloader.3910421/
poog said:
Hi, I have the exact same device as you.
1) Did you just flash the full RETLA (XT1965-2) firmware from LoLinet? as-is? or did you need to modify radio stuff?
Click to expand...
Click to collapse
I flashed everything except the radio related stuff identified above using the instructions in the xml file.
poog said:
2) There apparently is a method to mask the nag message of "another operating system". It is to flash another modified logo . There a a couple discussions about it. Here is 1. https://forum.xda-developers.com/t/bootlogo-modded-bootlogo-from-unlocked-bootloader.3910421/
Click to expand...
Click to collapse
Thanks! I will check it out.

Categories

Resources