Related
On my phone, can not boot into recovery mode. No matter how many times I try to use the home and power button. I even went to youtube to watch a video on it to make sure I was doing it right.
I have installed clockwork recovery via fastboot many many times, using different versions. I also have tried it with different roms installed.
I wonder if it is because the first rom I installed was superfast froyo, which says recovery is not working. I also installed swiftdroid 2.0, which also wouldn't let me use recovery. Though I forgot to try to reboot into recovery from the android menu when I had swiftdroid installed.
It's not a big deal anymore, since I accomplished what I wanted. I installed Froyo Optimum V3 with data2system via fastboot, and it worked fine. I now have 245mb on the phone so it is all good. When I installed it I just installed boot.img, cache.img, and system.img each to their respective partition, and data.img to userdata partition. So far, everything works fine.
However, it does bother me a little that recovery isn't currently working, I'm sure I'll find the answer sooner or later. Anyone have any ideas?
Hello as I can see you recently uppdated from stock 2.1? Then something went wrong and you used a rom that does not support recovery. Please tell what .kdz you flashed
EDIT: http://forum.xda-developers.com/showpost.php?p=13205397&postcount=26
lavero.burgos said:
Hello as I can see you recently uppdated from stock 2.1? Then something went wrong and you used a rom that does not support recovery. Please tell what .kdz you flashed
EDIT: http://forum.xda-developers.com/showpost.php?p=13205397&postcount=26
Click to expand...
Click to collapse
All Fastboot ROMs support recovery regardless of their version.
Try this:
Go into fastboot and open a Command Prompt and type:
Code:
cd <location of SDK Tools>
fastboot erase recovery
fastboot flash recovery nameofrecoveryimage.img
fastboot reboot
This fixed my problem I had when I first flashed fastboot onto my GT540, don't know if it will work for you or not, but its worth a try
Hope it helps,
Jack
Original poster here. Changed name for obvious reasons.
I think something did go wrong during the initial upgrade to 2.1. I forgot to mention a couple of things now that I think about it.
I used this link for most of my information:
http://forum.xda-developers.com/showthread.php?t=1032744
I first installed the european rom listed in that thread via KDZ. I never get an LG screen during boot up. I don't remember if the stock 1.6 had an LG screen or not. I think upgraded to what was then called "super fast froyo 2.2." I then wanted to install a rom with data2system, when was when I realized restore wasn't working. I then tried to downgrade back to the european rom via KDZ. It didn't work. Whenever I booted the phone, all I got was a black screen similar to the fast boot screen. I re-installed the european rom via KDZ, same results. Installed "swift droid 2.0" via fast boot, no recover. Then I installed I installed Froyo Optimum V3 with data2system, via fastboot, which is where I am now, still with no lg screen during boot-up.
Thanks you for your help, and i will try the link posted by JackG256 when I have time.
typci said:
Original poster here. Changed name for obvious reasons.
I think something did go wrong during the initial upgrade to 2.1. I forgot to mention a couple of things now that I think about it.
I used this link for most of my information:
http://forum.xda-developers.com/showthread.php?t=1032744
I first installed the european rom listed in that thread via KDZ. I never get an LG screen during boot up. I don't remember if the stock 1.6 had an LG screen or not. I think upgraded to what was then called "super fast froyo 2.2." I then wanted to install a rom with data2system, when was when I realized data to system wasn't working. I then tried to downgrade back to the european rom via KDZ. It didn't work. Whenever I booted the phone, all I got was a black screen similar to the fast boot screen. I re-installed the european rom via KDZ, same results. Installed "swift droid 2.0" via fast boot, no recover. Then I installed I installed Froyo Optimum V3 with data2system, via fastboot, which is where I am now, still with no lg screen during boot-up.
Thanks you for your help, and i will try the link posted by JackG256 when I have time.
Click to expand...
Click to collapse
Actually the link you see was the one posted by me lol i recently posted on my reference guide thread aboutcases when you brick your phone and possible fixes, there is one for your problem.
Also as i have read plenty about this kind of things i can assure that not all the kdz with fastboot support recovery that is a myth , there is a recovery_rom.kdz, there is out.kdz and other .kdz roms that has a purpose.
My theory is that not all the LG GT540 are the same thing, why? because simple if you read all the threads of users that have had issues with their phone saying this ROM worked for me and then another user saying that it didnt for him but other rom did the job. There are so many .kdz ROMS and even more are been released, but modified to support fastboot and recovery.
So if you do a bit more of research you can find original stock .kdz roms and their modified version requested by many users marginalized because of their location.
Hope you fix yor phone with the one posted in my thread, good luck! you will need it.
I think you are correct about not all gt540 are the same. I have an "international version." When I was installing drivers, it was a very complicated issue, and most of the drivers I found didn't work. I had to use the drivers supplied by LG via their lgmobile update program, to get my phone interact correctly with my computer. Luckily, I have alot of experience with flashing and custom roms for other electronic devices. So I know how to handle bad flashes, and other problems for the most part. Right now, my gt540 is fine, no recovery, but the custom rom is working just fine. Next time I want to swap out custom roms, probably when the android 3.3 builds become very stable, I'll play around with some KDZs and try to get recovery working.
Thanks for your help.
If you want to try with more kdz then you should try with one modified by mur4ik for data2system method.
Sent from my GT540 using XDA App
DELETED!
Don't want to risk anyone getting bricked, because of me giving you the wrong info.
Thanks for this topic, but I've a few questions:
- If I unlock the bootloader, can I still use TrackID or is it completly over?
- Which other Sony apps are effected (except WisePilot)?
- Can I re-lock the bootloader with FlashTool as written in the forums here to use TrackID again?
- Can I flash a new bootloader with FlashTool, too? I didn't read anything about it and I don't want to use any sony page.
- Currently I'm using Xperia CWM (from Google Play) with a stock kernel and different ROMs. It works so far. Is CWM included with every kernel?
1) Download TrackID from the market. That's a better and newer version than the one supplied with the ROM, plus it works even with an unlocked bootloader.
2) FB Like won't work if you've got the bootloader unlocked. But I hardly think that's a deal breaker.
3) Yes, you can relock the bootloader but the original TrackID still wouldn't work as you would have erased the DRM keys. (The newer version still works).
4) You can't flash a bootloader. You can flash kernels and ROMs.
5) Most custom kernels have CWM recovery within.
Cheers! Hope that answered your questions.
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2
xtacy! said:
4) You can't flash a bootloader. You can flash kernels and ROMs.
Click to expand...
Click to collapse
This was a typo...
Did I mention that I'll flash a new kernel soon? I'll try it with FlashTool.
1. Can I unlock & root after official ICS update?
2. Can I install custom ROM using this(http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Arc:_Full_Update_Guide) method?
Just to be sure: I can only unlock the bootloader of my Arc S with the Sony-method? Is there another free way to do it?
In FlashTool I've to select "Flash" -> "Fastboot Mode" -> "Reboot into fastboot mode (via ADB)" -> "Select kernel to Flash" and flash the kernel file?
edit: All my questions were answered in the last hours.
hi, can i root my arc s with ICS with DoomLor method?
Hi,
I did steps 1& 2 (unlocking & rooting) but nothing seems to have happened. How can I tell if it worked? I followed everything to the T and got no errors.
Ive just checked and my bootloader is unlocked butthe pphone does not appear to have been rooted (I checked using a root checker app). Can you think of any reason for this? Should I just try again or could that cause me problems?
Thanks
edit:
Do I need to do step 3 & 4 before it is fully rooted? I assumed I could stop after step 2...
anybody? please help. im not sure if i should try to flash the rom if it isn't rooted yet, or is that what i need to do to complete the process?
soooo confused
twelveways said:
anybody? please help. im not sure if i should try to flash the rom if it isn't rooted yet, or is that what i need to do to complete the process?
soooo confused
Click to expand...
Click to collapse
The root method posted doesn't work with the latest ICS (431) update.
I'm running Android 2.3.4 and the build number is 4.0.2.A.0.62.
thanks for that
i have arc s and when i tried the way you say
it says already unlocked
is that normal ??
or there is a problem ??
This has only been tested on Arc S with 4.0.3 firmware.
THIS WILL NOT WORK ON THE LATEST FIRMWARE (4.0.4)
Sorry for not answering guys, thought my thread was dead.
Will bookmark.
Oscar-Mark said:
THIS WILL NOT WORK ON THE LATEST FIRMWARE (4.0.4)
Click to expand...
Click to collapse
Worked for me.
Update: Thread edited a bit.
If anyone has got this working on the latest (4.0.4) firmware please tell, (reply, no PM)
please can you reup the part of kernel flashing? i thought this thread is still existing, i deleted the hole system to prepare it for new rom and kernel flashing and no its deleted?! please help me my phone doen't boot i need a tutorial to flash the kernel, this tut herer was extreme good and noob friendly, please reuppload it :C
Google fetishist said:
please can you reup the part of kernel flashing? i thought this thread is still existing, i deleted the hole system to prepare it for new rom and kernel flashing and no its deleted?! please help me my phone doen't boot i need a tutorial to flash the kernel, this tut herer was extreme good and noob friendly, please reuppload it :C
Click to expand...
Click to collapse
To flash a kernel:
This will wipe all your data
Turn off your device, make sure you have atleast one ROM on your SD card in case anything goes wrong.
Put the kernel boot.img in /fastboot/fastboot_with_Android_USB_file/fastboot folder.
Press and hold SHIFT button while right clicking at an empty space in the /fastboot/fastboot_with_Android_USB_file/fastboot folder, and select "open command window here". (you can now release the SHIFT button )
Now plug your phone's USB cable to your computer.
Press and hold the MENU button on your phone, while connecting the MicroUSB connector to your phone.
When the LED turns blue you can release the button, your phone is now in fastboot mode.
Open the command window and insert the text you got in the Kernel thread, most certainly fastboot flash boot FILENAME.img, and press ENTER.
When the Command Window is finished close it and unplug your phone.
Turn on the phone, and when the button backlights turn on quickly press any button. Your phone will now boot into CWM Recovery.
RECOMMENDED: do a full wipe and flash your ROM.
If you want to keep your ROM and data just wipe cache and dalvik.
(If you're coming from a kernel with WiFi modules (ArcNight, DoomKernel) DO NOT do this, it will only mess up your phone.)
Stuck on "ACER" logo at boot...won't boot & pc can't see it.
If I go into recovery I get: Android Guy & Box with arrow then a triangle with explanation point.
I was running ICS Rooted OTA.
I was trying to return the tablet to stock ICS & Boot Loader, when I messed things up.
(Sold Tablet--Need to restore it to factory look & feel.)
If someone could please advise I'd GREATLY appreciate it.
Thanks,
Rob
rgenins said:
Stuck on "ACER" logo at boot...won't boot & pc can't see it.
If I go into recovery I get: Android Guy & Box with arrow then a triangle with explanation point.
I was running ICS Rooted OTA.
I was trying to return the tablet to stock ICS & Boot Loader, when I messed things up.
(Sold Tablet--Need to restore it to factory look & feel.)
If someone could please advise I'd GREATLY appreciate it.
Thanks,
Rob
Click to expand...
Click to collapse
Have you tried to restore HC boot loader on an ICS rom. Don't worry just download one of the update package from the following link. As you mentioned you were on ICS rom then try ICS update only as it will update boot loader back to ics. Decrypt the file using Acer decrypter on the same link. Place the update.zip on your externel SD and then boot in recovery. Let other recovery install the update file.
http://forum.xda-developers.com/showthread.php?t=1113878
Only Acer logo
Hi all,
i have the problem that the A500 does nothing else but show the Acer logo.
The only thing i can do is use TWRP.
What did i try:
I tried flashing some roms using TWRP, also some older ones but no luck.
I tried using an empty SD-card and then start with Volume - and Power but no luck
What can i do...i am stuck...
Anyone? Still have a non-working Iconia 500...boohoo
Is it an option to flash it with Clockworkmod / CWM, reboot, flash it with an Acer ROM ?
jan99 said:
Anyone? Still have a non-working Iconia 500...boohoo
Is it an option to flash it with Clockworkmod / CWM, reboot, flash it with an Acer ROM ?
Click to expand...
Click to collapse
Well, telling us you've "tried some other ROMs" and have had "no luck" is pretty much telling us nothing at all.
What ROMs -exactly-?
What -exactly- do you do in TWRP?
What version of TWRP?
-Exactly- what error messages do you get?
What bootloader do you have? Sounds to me like you might have the HC bootloader when trying to install a stock ICS ROM. This is not going to work, period.
If you want help, you've got to provide enough info to help you.
Hi FloatingFatMan,
thanx for your answer.
I tried TWRP v2.1.0 with following roms:
Acer_A500_4.010.42_7.006.01_COM_GEN1
Acer_A500_7.014.14_041.203.01_COM_GEN1
cm-9-20120708-UNOFFICIAL-a500
recovery-ra-iconia-3.17-
gnm
Today i updated TWRP to v2.2.0 using openrecovery-twrp-2.2.0-picasso-signed and tried the cm-10-20120730-UNOFFICIAL-a500.zip rom. Same problem, after system reboot i only see the acer icon (permanent).
Also tried cm-9-20120708-UNOFFICIAL-a500.zip but same problem.
What can i do?
There are three main ingredients when customizing a device:
1) BOOTLOADER
2) RECOVERY
3) ROM/KERNEL
You provided answers to #2 and #3....what about #1??? What BOOTLOADER are you on?
Thanks for your reply.
I never changed my bootloader so that will be stock i think.
Finally i managed to get it going again. The trikck was to use a 3.0 stock rom. That worked.
From there i now use ICS (stock) which is fine at first. I had not seen anything but the Acer logo the past 2 weeks, so the Acer ICS will do perfectly now.
But for later on: can i use CM9 or CM10 with default bootloader + TWRP 2.2.0?
Rippster said:
There are three main ingredients when customizing a device:
1) BOOTLOADER
2) RECOVERY
3) ROM/KERNEL
You provided answers to #2 and #3....what about #1??? What BOOTLOADER are you on?
Click to expand...
Click to collapse
You'll need the unlocked ICS bootloader. Civato made a great guide over in the DEV section.
jan99 said:
Thanks for your reply.
I never changed my bootloader so that will be stock i think.
Finally i managed to get it going again. The trikck was to use a 3.0 stock rom. That worked.
From there i now use ICS (stock) which is fine at first. I had not seen anything but the Acer logo the past 2 weeks, so the Acer ICS will do perfectly now.
But for later on: can i use CM9 or CM10 with default bootloader + TWRP 2.2.0?
Click to expand...
Click to collapse
OK to explain for you.
ICS and JB require the ICS bootloader to run. They will not run on the HC bootloader unless specifically modified to do so. Also, no HC ROM will run on the ICS bootloader. This is why none of those ROMs were working for you.
Flashing stock ICS has updated your bootloader with the locked ICS one, so you probably won't be able to downgrade to any HC ROMs, or use any custom ROMs anymore. You can, however, use APX mode to install the unlocked ICS bootloader which will enable custom ROMs again.
I don't recommend trying to install ANY custom ROMs now until you'd flashed the unlocked bootloader. Instructions for this are in the Development section. Read VERY carefully before proceeding and if in doubt, don't proceed.
Hi FloatingFatMan,
thanks for the explanation.
I think i will stick to the stock rom at first. The APX way is not without risk...but maybe in the near future...
jan99 said:
Thanks for your reply.
I never changed my bootloader so that will be stock i think.
Finally i managed to get it going again. The trikck was to use a 3.0 stock rom. That worked.
From there i now use ICS (stock) which is fine at first. I had not seen anything but the Acer logo the past 2 weeks, so the Acer ICS will do perfectly now.
But for later on: can i use CM9 or CM10 with default bootloader + TWRP 2.2.0?
Click to expand...
Click to collapse
I am having the same "stuck on acer logo" issue. I am totally novice when talking about how to flash to ROM and stuff. Can you please direct to me a simple "dummy guide" on how to flash back to factory rom and fix my tablet. I tried the hard reset by holding down volume up and pwr button and on/off button, where i see the 'erasing..." but it still goes back to logo screen.
Please help me with my situation. Thanks in advance.
Have a look at this video
That is an example on how to do it.
Hello.
I'm quite new to the CyanogenMod-stuff in general, though I'm not a complete beginner when it comes to Cellphone flashing.
I have tried several CM-versions on my Milestone 2 (UK model), CM7 even bricked my phone, but I was able to revive it using RSD and an SBF file.
Ok, just as a background.
My question or problem is: NO version of CM works properly on my MS2. Mostly the google keyboard AOSP keeps crashing, the OTA updater, too and the browser won't open in any version. White screen flash, then closes.
There is a thread about all the versions (http://forum.xda-developers.com/showthread.php?t=1827801), but I can't be bothered to read 101 pages, my apologies. So, if anyone just KNOWS the answer, because it's a known bug or whatever, please let me know.
I intend to use the latest CM10.2.1 build date 28-12-2012, nightly. Are all those builds simply buggy? Is there any stable? Should I try one of the new CM11 ROMs instead? Recommendations on THE best ROM for the MS2 welcome
To run CM7 you have to do firmware downgrade with a special sbf (look for so called "Chinese kernel").
Concerning other problems you describe, I have none of these. Maybe you don't do a full phone wipe after flash (wipe everything besides system). Or you install some broken apps? Or maybe ROM zip file is broken?
rabinhood said:
To run CM7 you have to do firmware downgrade with a special sbf (look for so called "Chinese kernel").
Concerning other problems you describe, I have none of these. Maybe you don't do a full phone wipe after flash (wipe everything besides system). Or you install some broken apps? Or maybe ROM zip file is broken?
Click to expand...
Click to collapse
Thanks for your reply. Downgrade doesn't sound that good. Do we have any disadvantages by downgrading? I was hoping to be able to run the 3.x kernel on that phone...
I will look for that special SBF, if I dislike it, I flash the stock SBF again, that always includes the kernel, right?
About the crashing apps: It happens instantly after the flashing (and wiping data+cache partition) when the phone has booted. Google keyboard and browser are preinstalled. No broken apps. plus I tried several ROMs, they can't all be broken the same way. I'm pretty out of ideas, apart from that kernel thing...
As far as I know there's no working 3.x kernel for MS2.
Yes, after you flash a modified kernel, you can simply restore default one by flashing an original sbf.
MS2 bootloader is locked, that means if you want to flash another bootloader, it has to be signed with a secret Motorola key (it hasn't been released/leaked). Also you cannot downgrade bootloader. If you flashed European GB, you won't be able to flash Froyo (that can be bypassed with Chinese kernel, which is said to be signed with both Froyo and GB keys). If you flash Latin America GB, you won't be able to flash Euro GB nor Froyo. Only LATAM ROMs will be bootable.
Q&A for Acer Stock Firmware Files List (Full, Update and EUUs)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Looking to do a stock install of 3.2 on A501
blackthund3r said:
LIST OF FILES
Please note that none of these files are rooted and/or tweaked! They are stock Android ROMs from Acer and designed for stock recovery!
Flashing them will remove custom recovery and/or custom bootloader! You will be fully stock! Update zips may not install if you have modified your device in any way. If unsure use a full package! You need an EUU package only if your device is bricked as it will be completely wiped clean in the process!
-----------------------------
I am looking for the 3G version the 3.2 stock ROM to do a fresh install on my A501
The link from Vache seems dead.. can anyone please help to provide that particular ROM?
Thanks a lot. Desperately need some help as I'm password locked out!
Click to expand...
Click to collapse
sskhaliq said:
blackthund3r said:
LIST OF FILES
Please note that none of these files are rooted and/or tweaked! They are stock Android ROMs from Acer and designed for stock recovery!
Flashing them will remove custom recovery and/or custom bootloader! You will be fully stock! Update zips may not install if you have modified your device in any way. If unsure use a full package! You need an EUU package only if your device is bricked as it will be completely wiped clean in the process!
-----------------------------
I am looking for the 3G version the 3.2 stock ROM to do a fresh install on my A501
The link from Vache seems dead.. can anyone please help to provide that particular ROM?
Thanks a lot. Desperately need some help as I'm password locked out!
Click to expand...
Click to collapse
Best to just get stock ICS. Why are you password locked? Is the device stolen? I can easily help you get past it but I'm not sure whether I should.
Click to expand...
Click to collapse
Thanks blackthunder. It's our personal device, my wife set the password some time back and is sure she hasn't forgotten but for some reason it's not being accepted. We can't figure out why! I have the original receipt and box etc in case anyone's interested!
I tried the stock ICS Rom by naming it update.zip and rebooting into recovery, but that gets stuck at the Android guy logo immediately. Also tried 3.2 before that via a link from this page, and that seems to work until the progress bar hits about 80%. Then it just reboots back to the dreaded locked screen. From what I understand I can only do a reinstall of the same ROM version that's currently installed? We have a password lock on it, and not pattern. Would highly appreciate any help. . Really want this thing to start working again. It's practically new [emoji20]
Guys any idea? Really desperate here. Thanks in advance!!
sskhaliq said:
Thanks blackthunder. It's our personal device, my wife set the password some time back and is sure she hasn't forgotten but for some reason it's not being accepted. We can't figure out why! I have the original receipt and box etc in case anyone's interested!
I tried the stock ICS Rom by naming it update.zip and rebooting into recovery, but that gets stuck at the Android guy logo immediately. Also tried 3.2 before that via a link from this page, and that seems to work until the progress bar hits about 80%. Then it just reboots back to the dreaded locked screen. From what I understand I can only do a reinstall of the same ROM version that's currently installed? We have a password lock on it, and not pattern. Would highly appreciate any help. . Really want this thing to start working again. It's practically new [emoji20]
Click to expand...
Click to collapse
Your beat bet is using an EUUs package to wipe the tablet and reset back to 3.0.1 then use Flash Tool to get CWM or TWRP + a decent ROM
blackthund3r said:
Your beat bet is using an EUUs package to wipe the tablet and reset back to 3.0.1 then use Flash Tool to get CWM or TWRP + a decent ROM
Click to expand...
Click to collapse
To install EUUs, is it the same process; rebooting with power+volume and flashing via SD card? What version EUUs do you think I need, currently I have 3.2 installed. Is there a guide for above?... will be a lot of help. Many thanks
sskhaliq said:
To install EUUs, is it the same process; rebooting with power+volume and flashing via SD card? What version EUUs do you think I need, currently I have 3.2 installed. Is there a guide for above?... will be a lot of help. Many thanks
Click to expand...
Click to collapse
Actually, even easier.....use the APX Flash Tool to get yourself a CWM Image (you'll need your SBK....there's a fair few guides on obtaining this) then do a wipe data/factory reset within CWM.
From there it's fairly easy to side load the latest Acer ROM.
Thanks. I'll try it out over the weekend! Appreciate your help!
God morning! For the apx tool, I'm not sure if USB debugging option is selected, never ticked that myself consciously. Is it OK to go ahead?
Tried using the apx tool after downloading the Acer USB drivers and in short no luck.
Had to go the manual route for flashing since I don't have USB debugging enabled.
Tried two packages, one honeycomb bundle 6 and then also tried a later one for ICS.
It goes thru the motions enters APX mode with confirmation as well on the tab screen, without any hiccups right to the end. But then reboots to the old dastardly lock screen asking for password!
Any ideas? Already backed up using mobo app so am OK to wipe clean and start anew.
Acer b1-720 update.zip
Do you have any update.zip firmwares for an acer B1-720? Its the only way i can restore my tablet
Good sir i'm new with this stuff, will you teach me how to flash in my acer a500 tablet and what is the right firmware because my acer a500 stuck oin logo, hope yuo will teach how. Thank you and more power
Good day sir i'm sorry sir but really dont which should i flash on my acer a500 that stuck on logo, pls help me which file shoukd i flash and step by step how to flash thank you for the help
Iconia
Guyz.. Im not finding any firmware for Acer iconia b1 711. And this is bricked too. I only have an update file which i received from AcerAcer. And im not able to install it too. Plz help...
Options for upgrading an Acer A500: Acer_A500_4.010.15_COM_GEN1
OK, heres a totally noob question. I have an Acer A500 I bought used. It has been rooted apparently. Has the ClockWorkMod bootloader installed, v5.0.
My question is, what are my options to upgrade this tablet and is there a thread with instructions on which firmware files to use, how far can I go with upgrading the A500 (ICS?). Not really looking to trick it out and go the whole mod route, would be happy with stock firmware, just looking to make it a little more up to date and, above all _stable_! The main issue I have with it now is the wifi craps out every month or so and I have to do a refresh and wipe all info and start over.
I used to get prompted to install a system update, and every time, it would fail with the dead Android dude on his back....so sad. Now, it just tells me, "Network Coverage is poor, please move to a location with better coverage". I am sitting right beside my router...
Here are the relevant specs:
Model number: A500
Build number: Acer_A500_4.010.15_COM_GEN1
Kernel version: 2.6.36.3
If you need any other info in order to help, just let me know.
Thank you very much in advance for any advice!!