Hello Xda members and staff,
Today i tried to install the philz recovery for my phone Zte Blade L3 and then when i tried to boot up to the recovery it appeared to me the logo and then a white screen....i tried to install that recovery by twrp recovery for my phone because i want to install the ColorOs rom that is only available for this recovery.... anyone that can help please?
PS:I have tried to install one time a cyanogen mod 13 on my phone with twrp recovery and it appeared me an error MD5 file not found if that information is usefull
ColorOs:ztebladel3 blogspot
Philz Touch Recovery:ztebladel3 blogspot
also i have seen this rom in my phone on youtube!
I hope you will answear me and give me some helpful information or fix
Thanks <3
-Jack
Related
While trying ti install CM 11 from TWRP i managed to brick the phone. I dont want to waste time sharing the details unless it's need to solve the problem. The main thing is that my phone is now stuck at the LG logo. Previously i was running the CM 10.2 Stable Build.
How can i get back to working condition? Either CM or Genuine LG Rom, I just want my phone to be up and running.
Please Help. I am really scared at this moment.
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
muEcke* said:
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
Click to expand...
Click to collapse
I can enter both the modes shown in the video.
The thing is i was running CM 10.2 with a TWRP installed of version 2.6.3.2. I downloaded the CM 11 and went into TWRp to flash it but it couldnt flash the CM11. Then after searching the net i found out that TWRP 2.6.3.3 or higher is required to install CM11. The problem is that i wiped my dalvic, data, cache and system and did not keep a backup. So when the Cm11 wont install i was stuck in the TWRP as i didn not have the 10.2 rom file in the phone.
Then downloaded the TWRP 2.6.3.3 and also a CWM zip (just in case). Using ADB i tried to update the TWRM but still some other error shows up. Tried installing the CWm still some error shows up. i tried installing again and this time the recovery asked me to install superuser (though i was rooted). I selected YES and after that i am boot looping in the lg logo.
Anyways thats basically what happened. Now how do i get further and make my phone work again?
Please help brother. I am in deep trouble.
Thank You
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
muEcke* said:
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
Click to expand...
Click to collapse
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
in_core said:
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
Click to expand...
Click to collapse
So you can't enter the recovery like shown in the video? And the command adb reboot recovery doesn't work either?
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
hellot1M said:
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Ok then i will follow this process and hopefully be successful in getting my phone up and running.
Thanks for the help. Downloading 2Gb will take some time. So will post the result tomorrow.
Regarding rooting and installing custom recovery again, i will do that later. For now i just want my phone alive.
Anyways Thanks again everyone for the helpful information
Try getting to download mode right now. Because if you can't get to download mode you can't use the back to stock method
from my Note Thrizzle
Thanks everyone for the help and support. I have successfully reverted back to Stock LG Firmware.
I have some questions.
1. Do i have root access anymore?
2. Is my previous custom recovery still in my system?
3. If no for both then please help me with the appropriate article to root, install custom recovery and then install CM11, as my previous recovery was not able to install CM 11.
Thank You
I installed the philz advance touch recovery sadly when i rebooted my it gives me a recovery boot loop..then i manage to flash a new rom via otg still the same a boot loop..i dont know how to use the command on philz recovery as instructed i went to aroma file manager of philz then nothing happens...im so upset i dont know where can i get a flashable zip of twrp for lg g2 att d800..i need help guys or can someone recommend me a rom that would flash the same time a new recovery please..
Hey guys I have just rooted mt lg g2 install TWRP and install cyanogenmod then I tried to enter recovery but twrp logo appear and nothing happen i had tried alot then i tried to boot my phone but i got a security error what shoud i do please help :crying:
I'm having the same exact problem
Probably cyanogenmod rewrote something from TWRP. Did you try reinstall TWRP after cyanogenmod was installed?
There's a reason I don't cyanogenmod its very buggy on the g2 Mahdi ROM is the best I've had no problems with it
GrAndAG said:
Probably cyanogenmod rewrote something from TWRP. Did you try reinstall TWRP after cyanogenmod was installed?
Click to expand...
Click to collapse
thank u for ur reply actually I have solved it this morning I entered download mode and got it back to stock and I root it again and installed cm 11 m8 and it works fine now but I think that mahdi rom is ok too
thanks
A new problem
I have flashed a custom kernel now the phone stuck at lg logo and whan i press power button for 10s it restart how can i shut it down
:crying:
I have zte blade 220.(avea intouch 4)
I intalled philz touch recovery.
I want to install custom rom but philz recovery did not install custom rom.
Then I flashed twrp on philz touch but philz touch did not change.
I want to install a custom rom only.
How can I install twrp???
I tried everything.
Can you help me please.
Sorry for my bad english.
Have a good days...
Can you help me please...
Sp flash tool for zte?
How Can I find and download it?
Can you help me please...
Hello, I'm Spinoni31 and this is my first thread.
I've got some problems whrn trying to install some custom roms available here on this forum.
I'm using mparus twrp 3.0.3 beta from the unofficial lineageOS 14.1 thread in the roms section
the problem is that when i flash a custom rom, the flashing itself is completed correctly on the recovery, but when i try to reboot the system, my phone reboots directly into twrp without pressing the Vol. up + Power button combination. I've also tried installing other roms from this forum, but the result is the same (Meaning flashing in the recovery works fine, when i reboot i get kicked back to twrp).
I Know how to flash roms only in CWM (Because of another phone that i had with that recovery).
Can someone please guide me through the procedure of flashing a rom on twrp?
Thanks in advance, Spinoni31.
Spinoni31 said:
Hello, I'm Spinoni31 and this is my first thread.
I've got some problems whrn trying to install some custom roms available here on this forum.
I'm using mparus twrp 3.0.3 beta from the unofficial lineageOS 14.1 thread in the roms section
the problem is that when i flash a custom rom, the flashing itself is completed correctly on the recovery, but when i try to reboot the system, my phone reboots directly into twrp without pressing the Vol. up + Power button combination. I've also tried installing other roms from this forum, but the result is the same (Meaning flashing in the recovery works fine, when i reboot i get kicked back to twrp).
I Know how to flash roms only in CWM (Because of another phone that i had with that recovery).
Can someone please guide me through the procedure of flashing a rom on twrp?
Thanks in advance, Spinoni31.
Click to expand...
Click to collapse
Tienes que flasear con recovery Philz Touch
I try flash phliz touch but my screen is black and only vibre
Have a true phliz touch for flash?
jomhuur said:
I try flash phliz touch but my screen is black and only vibre
Have a true phliz touch for flash?
Click to expand...
Click to collapse
Me too help us pls where are we do wrong?
choose boot to recovery ( Not System ) option from twrp itself it will boot directly to system .