Where to download full Samsung firmware SM-G950U1? - Samsung Galaxy S8 Questions and Answers

I'm am new the the galaxy world and I would like to root my SM-G950U1 (carrier unlocked) S8. I can't seem to find where to download back up firmwares in case of issues. I have searched for forums and can't seem to lock down where the few i found are and if they are compatible with the 950u1. Does anyone know where a full list of full stock official firmwares is located? Or am i missing something.... Thanks

sammobile.com perhaps or sure

http://updato.com/firmware-archive-select-model?q=SM-G950U1&exact=1&r=XAA&v=&rpp=15

Michajin said:
I'm am new the the galaxy world and I would like to root my SM-G950U1 (carrier unlocked) S8. I can't seem to find where to download back up firmwares in case of issues. I have searched for forums and can't seem to lock down where the few i found are and if they are compatible with the 950u1. Does anyone know where a full list of full stock official firmwares is located? Or am i missing something.... Thanks
Click to expand...
Click to collapse
This tread will have enough info for you to flash the phone + firmware download.
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817

Charkatak said:
This tread will have enough info for you to flash the phone + firmware download.
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Click to expand...
Click to collapse
Awesome, thanks!

geoff5093 said:
http://updato.com/firmware-archive-select-model?q=SM-G950U1&exact=1&r=XAA&v=&rpp=15
Click to expand...
Click to collapse
Hi. Is this the firmware I can use to get back to stock without carrier bloat?

all Samsung Firmware Download
a2zrom.com/samsung-firmware

Related

[Q] Cannot upgrate GN3 N9005 via ODIN 3.07

Hi All,
I have a Galaxy note 3 - N9005 LTE 32 GB.
It had JB installed however i wanted to instal KK on it so i downloaded the Germany KItkat fimrware NB4 and after flashing Odin says Fail!
I cheked Autoreboot & Reset Time.
Appreciate all the help you can give to solve this issue.
Also - if the answer will contain refrences to other firmwares include links coz i have been searching for POLAND firmware however icannot find where to download it.
Thanks
newapostlenew said:
Hi All,
I have a Galaxy note 3 - N9005 LTE 32 GB.
It had JB installed however i wanted to instal KK on it so i downloaded the Germany KItkat fimrware NB4 and after flashing Odin says Fail!
I cheked Autoreboot & Reset Time.
Appreciate all the help you can give to solve this issue.
Also - if the answer will contain refrences to other firmwares include links coz i have been searching for POLAND firmware however icannot find where to download it.
Thanks
Click to expand...
Click to collapse
What country code are you on now? This German (DBT) suppose to be for unbranded phones, but people have problems flashing this. Keeps getting fail in Odin. I'm having this too and I'm standing back for the moment awaiting solution.
You can flash the Polish (XEO) NB3 and the file can be downloaded from sammobile.com/firmwares
Sent from my SM-N9005 using Tapatalk
mikkelrev69 said:
What country code are you on now? This German (DBT) suppose to be for unbranded phones, but people have problems flashing this. Keeps getting fail in Odin. I'm having this too and I'm standing back for the moment awaiting solution.
You can flash the Polish (XEO) NB3 and the file can be downloaded from sammobile.com/firmwares
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply.
I am in the middle east (Saudi) - but my phone is carrier unlocked.
Polish firmware works? i mean you didnt get the error with that.
Thanks
MQ
mikkelrev69 said:
What country code are you on now? This German (DBT) suppose to be for unbranded phones, but people have problems flashing this. Keeps getting fail in Odin. I'm having this too and I'm standing back for the moment awaiting solution.
You can flash the Polish (XEO) NB3 and the file can be downloaded from sammobile.com/firmwares
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Can you furnish a more specific link? This link is linking to S4 and i am having a hard time finding the correct frimware.
Appreciate your help.
newapostlenew said:
Can you furnish a more specific link? This link is linking to S4 and i am having a hard time finding the correct frimware.
Much Appreciate your help.
Click to expand...
Click to collapse
Thank you
Couple of questions
1- The poland firmware works for sure? or does that render odin to fail as well?
2 - Can i install 4.3 firmware stock? if yes can you pls share a link.
Appreciate your help.
newapostlenew said:
Can you furnish a more specific link? This link is linking to S4 and i am having a hard time finding the correct frimware.
Appreciate your help.
Click to expand...
Click to collapse
The sammobile.com/firmwares are for all Samsung phones. Fill in N9005 in the fw search box to search firmwares.
Sent from my SM-N9005 using Tapatalk
mikkelrev69 said:
The sammobile.com/firmwares are for all Samsung phones. Fill in N9005 in the fw search box to search firmwares.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks i was able to locate the firmware in question right here on XDA as SAMMOBILE i encounter download issues/dead pages. Here is the link
http://forum.xda-developers.com/showthread.php?t=2647861&page=2 (for anybody else visiting this page.
Also - can i revert back to 4.3 and flash that?
Thanks
newapostlenew said:
Thanks i was able to locate the firmware in question right here on XDA as SAMMOBILE i encounter download issues/dead pages. Here is the link
http://forum.xda-developers.com/showthread.php?t=2647861&page=2 (for anybody else visiting this page.
Also - can i revert back to 4.3 and flash that?
Thanks
Click to expand...
Click to collapse
There is no returning to 4.3 once you have upgraded your bootloader to 4.4.2
radicalisto said:
There is no returning to 4.3 once you have upgraded your bootloader to 4.4.2
Click to expand...
Click to collapse
Thanks. I am currently dldlng. Hopefully this works.
You'll be OK with the Polish firmware it works fine
radicalisto said:
You'll be OK with the Polish firmware it works fine
Click to expand...
Click to collapse
You mentioned nogo to 4.3 due to bootloader however i dindt check the bootloader option in odin (see screenshot). Should i tick that as well next time?
Well there is some debate as to if you should check the bootloader or not.
With the leaked Polish firmware it came in seperate files. You needed to check to upgrade the Bootloader.
With the XEO single .zip firmware you don't need to check it as it upgrades automatically - plenty agree with this. -- There is a few people who say that by not checking it, it hasn't upgraded for them and some just recommend you check it for good luck sake.
radicalisto said:
Well there is some debate as to if you should check the bootloader or not.
With the leaked Polish firmware it came in seperate files. You needed to check to upgrade the Bootloader.
With the XEO single .zip firmware you don't need to check it as it upgrades automatically - plenty agree with this. -- There is a few people who say that by not checking it, it hasn't upgraded for them and some just recommend you check it for good luck sake.
Click to expand...
Click to collapse
Thanks Radicalisto.
Lets see how it goes. Fingers crossed.
Normally after the odin flash, all apps/data etc are there? If not what is the best/tried method of backup without root?
Thanks
radicalisto said:
You'll be OK with the Polish firmware it works fine
Click to expand...
Click to collapse
Does this rom suffer from any battery drain issues? or in general any issues? this isnt beta so i suppose none should exist.
No drain issues no, pretty decent build tbh.
belerephont said:
Normally after the odin flash, all apps/data etc are there? If not what is the best/tried method of backup without root?
Thanks
Click to expand...
Click to collapse
You mean the NEO one which radicalisto mentioned? if the former than ill update once i try this as i am re downloading it again. People should seriously use drop box instead of Mega.
newapostlenew said:
. People should seriously use drop box instead of Mega.
Click to expand...
Click to collapse
MEGA is country based per account. So if I upload to my MEGA it comes from a UK Server which is slow to Asia/America etc, trick is to set up your own MEGA account, and then import it from the download MEGA link and it'll switch to a server in your country and you'll get faster download speeds
radicalisto said:
MEGA is country based per account. So if I upload to my MEGA it comes from a UK Server which is slow to Asia/America etc, trick is to set up your own MEGA account, and then import it from the download MEGA link and it'll switch to a server in your country and you'll get faster download speeds
Click to expand...
Click to collapse
shucks! i am downloading - i have a 50Mbps fiber line however for the reason you mentioned i am downloading from a non account. Next time ill use my account. Thanks for that again.

[Q] Rom for Samsung Galaxy Note 3 N9007

Hi
Does anybody try to flash N9007? I only can find rom for N9005. Thanks
terryzhu said:
Hi
Does anybody try to flash N9007? I only can find rom for N9005. Thanks
Click to expand...
Click to collapse
Did you mean stock rom? Or custom rom
vndnguyen said:
Did you mean stock rom? Or custom rom
Click to expand...
Click to collapse
Thanks for your reply. Yes, it's customer rom. Now, t's running official 4.3.
terryzhu said:
Thanks for your reply. Yes, it's customer rom. Now, t's running official 4.3.
Click to expand...
Click to collapse
I'm in the same boat mate. Got my Note 3 a few weeks ago and was surprised to find a different mdoel N9007. Don't care about the knox status and really want to get rid of all the carrier bloatware. I can see the HK version of stock Samsung rom but not sure if it is suitable for our devices.
espionage said:
I'm in the same boat mate. Got my Note 3 a few weeks ago and was surprised to find a different mdoel N9007. Don't care about the knox status and really want to get rid of all the carrier bloatware. I can see the HK version of stock Samsung rom but not sure if it is suitable for our devices.
Click to expand...
Click to collapse
if it's the same model then it should work. You should check against your PDA version when you type *#1234#, if it is N9007ZH download the HK version, if it is N9007DI download the Australian version.
terryzhu said:
Thanks for your reply. Yes, it's customer rom. Now, t's running official 4.3.
Click to expand...
Click to collapse
nicholaschum said:
if it's the same model then it should work. You should check against your PDA version when you type *#1234#, if it is N9007ZH download the HK version, if it is N9007DI download the Australian version.
Click to expand...
Click to collapse
well, that is my problem. the only available firmware for my model is the carrier's firmware. there are no stock firmwares for Australia for my model.
espionage said:
well, that is my problem. the only available firmware for my model is the carrier's firmware. there are no stock firmwares for Australia for my model.
Click to expand...
Click to collapse
Firmware is available on Sammobile but yes they are all carrier bloated.
For those of you still wondering, as long as you are on the 4.4.2 bootloader/modem, you can flash any aosp Rom and have no issues with mobile data or lte. The model number on your phone will change in the "about phone" section, bu if you can live with that, then no issues at all. I've just tried the Lollipop alpha build, and that worked fine, along with a bunch of other 4.4.4 AOSP roms and all ran smoothly.

[Firmware][Stock] Stock Firmware for Tab Pro's [Q&A][HowTo]

THIS GUIDE IS OVER 6 YEARS OLD AND HAS BEEN REMOVED TO PREVENT UNINTENTIONAL HARM
Reserved
Reserved
you guys know anywhere to download the latest sm-t320 firmware pre-rooted?
syde1020 said:
you guys know anywhere to download the latest sm-t320 firmware pre-rooted?
Click to expand...
Click to collapse
No, sorry but why dont you go ahead and flash back to stock and then follow my guide on how to root HERE
I am looking for the stock firmware for the sm T320 usa but I cant find it on the sammobile site. Any help will be very appreciated.
Thanks.
furialfil said:
I am looking for the stock firmware for the sm T320 usa but I cant find it on the sammobile site. Any help will be very appreciated.
Thanks.
Click to expand...
Click to collapse
The TM-320s are at the following. You need to filter by country. The standard U.S. firmware is under "Cellular South (XAR)":
http://www.sammobile.com/firmwares/database/SM-T320/
Do note that Lollipop just started rolling out to the Tab S series. Hopefully that's a sign that the Tab Pro Lollipop isn't much farther off.
I'm not able to download any firmware from the SamMobile site. Can anyone provide me with a firmware? I don't care about the region or anything since I'll be flashing CM right after that (my device is soft-bricked, and I need to flash stock firmware with Odin). If someone can either mirror a firmware or share it with me, I'd greatly appreciate it
Would flashing this firmware remove the KNOX triggered flag.
I.e. if I flash it, can I return it to the shop and Samsung for repair?
EDIT: Yes, it removes KNOX
I have problems during the boot of the tablet
I've followed all the steps but when i've finally used odin, my tablet doesn't power on, it stays at samsung, st 320 or something like that and I can't go further. Also it only shows all that stuff when it is pluged in the pc.
I really don't know what to do, so could anybody help me please???
remb said:
Would flashing this firmware remove the KNOX triggered flag.
I.e. if I flash it, can I return it to the shop and Samsung for repair?
EDIT: Yes, it removes KNOX
Click to expand...
Click to collapse
Can u explain pls. Did it go from knox=1 to knox=0 ? Everyone says that this is impossible, tho?
Ot u kept knox =0 thru reflashing stock firmware? Which one?
TIA!
J.Tichi said:
Can u explain pls. Did it go from knox=1 to knox=0 ? Everyone says that this is impossible, tho?
Ot u kept knox =0 thru reflashing stock firmware? Which one?
TIA!
Click to expand...
Click to collapse
Knox flag will still be 1 once it's triggered it's forever...........don't let anyone tell you diffrent......some people say after they sent it in for service and a Samsung service center Knox was back to 0 but don't know if that was ever verified....
I would like to flash back to stock with newest firmware but keep custom recovery. Also what about using newest version of odin?
How would I use that?
cloud71 said:
I would like to flash back to stock with newest firmware but keep custom recovery. Also what about using newest version of odin?
How would I use that?
Click to expand...
Click to collapse
I don't think that's possible unless you have a pre-rooted or custom rom that you are flashing thru Odin. If you flash the newest firmware it will wipe out your root and custom recovery and you start all over.
Did any one know which download is the stock firmware for US? Tab pro 12.2? Thanks
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
uplift777 said:
Did any one know which download is the stock firmware for US? Tab pro 12.2? Thanks
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Cellular South.
Sent from my Samsung Galaxy S5 using XDA Premium HD app
link please??
I cant download from sammobile, im stuck in a soft brick and cant find the stock firmware anywhere, can someone help please?
//bump
Xar-t520ueuank1_t520xarank1
Greek81 said:
I cant download from sammobile, im stuck in a soft brick and cant find the stock firmware anywhere, can someone help please?
Click to expand...
Click to collapse
I have the firmware, where can I upload it, I have copy in my dropbox
ccanetem said:
I've followed all the steps but when i've finally used odin, my tablet doesn't power on, it stays at samsung, st 320 or something like that and I can't go further. Also it only shows all that stuff when it is pluged in the pc.
I really don't know what to do, so could anybody help me please???
Click to expand...
Click to collapse
This happened to me. Does anyone have a solution?
detroitguy1 said:
This happened to me. Does anyone have a solution?
Click to expand...
Click to collapse
Factory reset
Sent from my SPH-L720 using Tapatalk

5.0.1 official firmware download link?

If anyone is aware of a free and fast download link, preferably I9505XXUPPI1 variant but any 5.0.1 will do, Thanx a ton..
Try SamFirm.
Pwnycorn said:
Try SamFirm.
Click to expand...
Click to collapse
That's a great website but unfortunately they don't seem to support earlier than S5,, I want the S4 firmware
sammobile.com
samsung-updates.com
Mo3tasm said:
That's a great website but unfortunately they don't seem to support earlier than S5,, I want the S4 firmware
Click to expand...
Click to collapse
It's also a program and I'm pretty sure people used it in the past to get S4 firmwares.
Unless they dropped support for the S4.

Debranding S8

Hi guys, I'm out of USA.
After many failed attempts still can not debrand my AT&T SM-G950U.
Through ODIN I upgraded successfully to latest G950USQS1AQF7_USC
But can not find any unlocked firmware (XAA) to my S8, only for S8+.
Any idea where to find it?
Thanks.
psicobelico said:
Hi guys, I'm out of USA.
After many failed attempts still can not debrand my AT&T SM-G950U.
Through ODIN I upgraded successfully to latest G950USQS1AQF7_USC
But can not find any unlocked firmware (XAA) to my S8, only for S8+.
Any idea where to find it?
Thanks.
Click to expand...
Click to collapse
Not searching very hard then. Update.com and search firmwares for G950U1. You'll see the latest XAA listed.
Works great (Minus volte and wifi calling), I've been running it myself
Thanks joe3681 for you answer.
Firmware downloaded from sammobile (G950U1UEU1AQE3_G950U1OYM1AQE3_XAA)
But i got the following error when try to install it: FAIL! Model dismatch fail
Sounds like it's not correct fw then.
http://updato.com/firmware-archive-select-model?record=1C742B3D514411E7963AFA163EE8F90B
This is what I used and it worked perfect. I also always use the modded Odin and remove .md5 off the end of everything once I extract it all.
Ok!!
The modded odin works!!
Debranded!!
Thanks a lot joe!
psicobelico said:
Ok!!
The modded odin works!!
Debranded!!
Thanks a lot joe!
Click to expand...
Click to collapse
Glad it worked! Modded Odin is all I ever use
joe3681 said:
Glad it worked! Modded Odin is all I ever use
Click to expand...
Click to collapse
what a modded odin ??
emaditto said:
what a modded odin ??
Click to expand...
Click to collapse
Here it is.
https://www.dropbox.com/s/2aqfpg4nwiwroyz/MODDED ODIN.zip?dl=0
psicobelico said:
Hi guys, I'm out of USA.
After many failed attempts still can not debrand my AT&T SM-G950U.
Through ODIN I upgraded successfully to latest G950USQS1AQF7_USC
But can not find any unlocked firmware (XAA) to my S8, only for S8+.
Any idea where to find it?
Thanks.
Click to expand...
Click to collapse
Could you plz provide the link for upgrading to AQF7. I have an at&t galaxy s8 as well and i am outside US so haven't been able to update it. I have unlocked my phone already. Bt no OTA updates. Plz provide me the link for the file. Thank you. I have
Baseband version :G950USQU1AQC9
Android security patch March 1, 2017
Hi Guys, I'm in the same case as the OP, and I have always updated via Odin using Sammobile's firmware, which only includes the AP file. I already downloaded the modded Odin and firmware from joe's post, but it includes a lot more files.
Should I load all the files to Odin? or just flashing the AP file would be OK? Thank you very much in advance!
---------- Post added at 01:01 PM ---------- Previous post was at 12:23 PM ----------
Sashank1923 said:
Could you plz provide the link for upgrading to AQF7. I have an at&t galaxy s8 as well and i am outside US so haven't been able to update it. I have unlocked my phone already. Bt no OTA updates. Plz provide me the link for the file. Thank you. I have
Baseband version :G950USQU1AQC9
Android security patch March 1, 2017
Click to expand...
Click to collapse
Use the one Joe posted.
http://updato.com/firmware-archive-s...3AFA163EE8F90B
I also speak spanish if that helps you.
So, I got home and flashed all files. Everything went alright and my S8 is updated and Bixby voice works just fine
joe3681 said:
Sounds like it's not correct fw then.
http://updato.com/firmware-archive-select-model?record=1C742B3D514411E7963AFA163EE8F90B
This is what I used and it worked perfect. I also always use the modded Odin and remove .md5 off the end of everything once I extract it all.
Click to expand...
Click to collapse
This firmware work for sm-g950u?
neowolfx said:
This firmware work for sm-g950u?
Click to expand...
Click to collapse
As long as it's the same bootloader version you have now. You can flash U1 on a U for bloat free firmware
I try do do this
I try to do the same but i get these error in the odin and in the cell i get sw check fail.
Anyone can help me?
jpcdeux said:
As long as it's the same bootloader version you have now. You can flash U1 on a U for bloat free firmware
Click to expand...
Click to collapse
Would that work with the SM-G955U?
Battleware said:
Would that work with the SM-G955U?
Click to expand...
Click to collapse
Yes as long as it's G955U1 firmware
Hi There, can I use 892U S3 bootloader version firmware on same bootloader 892A phone?
I have asked the same question here
https://forum.xda-developers.com/showpost.php?p=78894415&postcount=5
vazovskiiii said:
Hi There, can I use 892U S3 bootloader version firmware on same bootloader 892A phone?
I have asked the same question here
https://forum.xda-developers.com/showpost.php?p=78894415&postcount=5
Click to expand...
Click to collapse
From what it looks they are having issues between the to bootloader's. Your answer may come in the 892 partcyborg root thread.

Categories

Resources