Related
Hi,
after having several missed calls going straight to my answering machine on my new HTC Hero. I was getting a bit paranoiac, so I've decided to test in/out calls.
Basically, 90 of my incoming calls were going straight to my answering machine. Out-call were about 30% KO
After several tests, to make sure there was a problem, I've decided to request for support from HTC.
Support told me that I should shut the 3g connection every time I would want to receive a call .
So I tried and Bingo, if 3G is activated, I get 10% of the calls, if I deactivate it 90% success.
So you'll say, I should be happy? Right? Wrong!
The main use of that kind of phone is to have a data integration, otherwise I would have kept my old nokia from 10 years ago..
Here basically, if I follow HTC idea, I should keep the 3g closed, sometime, I should switch it on to get my mails, thanks to the non true push capacities (ok this one is not htc) then wait for the sync, maybe force it , get my mails, and then, shut 3g back and pray that no Über important call would have been done.
Well that plain sucks!
Never had such a thing on my previous Data friendly mobiles, why should I accept it on the Hero?
If someone have come across this bug, cause it is a bug, how did he/she managed to fix it?
Thanks
works fine on mine....i suggest you are on a ****e network, or on only 2G where you are. that's what usually causes this.
I guess they suggested this because it sounds like your network hasn't figured out how to route calls properly on their network when data is active, and they dump it straight to voicemail when there is a data connection active.
not the phone's fault, the phone won't even know that the call has been missed, the network simply does not route the call through and sends it to voicemail instead.
i had this on O2 a while ago. went to t-mobile (who knew how to set up their network properly for data) and never had this issue since when i am on 3G coverage. if i'm on 2G signal and have active data then yes, i miss calls. but that's how 2G networks operate.
it's truly shocking how many networks out there have absolutely no idea how to set up their networks properly for data!
Well I wish it would be that, my signal goes from -63 dbm 25 asu(80% of the time) to -81 dbm 16 asu.
Just after my post, I called one of my friend working in carrier terminal validation.
What he told me was, 2 options:
- Same bug was on the htc cruise, bug got corrected after a fw update.
- Some of my carrier radio are buggy and 3g goes over gsm.(SFR/VOdaphone France)
I bet for the first option since I had the problem in various places since I didn't want to ask support for nothing and get busted for a " feeling and not facts" (did the test in 3 differend location 80 tests in total(I used to be a tester....).
I will update the topic if I get news about it
nmuncer said:
!
Never had such a thing on my previous Data friendly mobiles, why should I accept it on the Hero?
If someone have come across this bug, cause it is a bug, how did he/she managed to fix it?
Thanks
Click to expand...
Click to collapse
You shouldn't accept it - but most people don't have this issue!
It's unlikely to be a "bug" per se, because otherwise it would be endemic behaviour, so it's either:
1. Your physical device (get it changed!)
2. Your network.
In addition, just an FYI in case you've got the new Sprint Hero, but most CDMA networks (including Sprint) do not support simultaneous voice and data. I've no idea what happens in practice on Sprint, but I'd imagine if you were actively using data your voice calls would get diverted to voicemail unless Sprint automatically suspends data when a voice call is pending.
Regards,
Dave
You're on SFR?
OUCH!!!!
Sounds like you have a nice strong signal, but is it 2G or 3G? (do you see a G, E 3G or H at the top of the screen?
if you see G or E, it's cos you're on 2G, If you get 3G or H, it's on 3G.
And yes, there were a few issues with the P3300 and the cruise, but they were mainly on Bouygues, not so much on SFR.
There's nothing known of on the hero, and as SFR sell the Magic, i would have thought they would have ironed out any issues already...
Hi,
I'm mostly in HSDPA or 3G.
I still have contacts with people at SFR (used to work there till recently) they might share a bit of info.
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
rhedgehog said:
if you see G or E, it's cos you're on 2G, If you get 3G or H, it's on 3G.
...
Click to expand...
Click to collapse
Regarding this and your suggestion that 2g and data will result in missed calls, Can you suggest how to avoid this happening? I live and work in the country and only have 2g, so have found quite often people have mentioned my phone not even ringing- straight to answer phone. This explains it.
Nice to know, but annoying if I can't solve it- I run a business and my phone is very important.
Cheers,
ajones7279 said:
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
Click to expand...
Click to collapse
i have sprint as well and when someone calls you when youre running hybrid, you should not miss calls. you will get disconnected from the internet when someone is calling though
ajones7279 said:
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
Click to expand...
Click to collapse
Hi, I'm on hybrid
that is what i hate about hero, it is really great except for the fact that it switches from 2g to 3g without notice. i want it to be permanently stuck in 3g for faster downloads and mms, but when it uses 2g, i cant send and receive mms and surfing the web is slow as heck! im still looking for an app that would permanently put the device in 3g just like with winmo it which you can use wcdma ONLY.
cheers!
If you use AnyCut, you can create a short cut by selecting:
New Shortcut->Activity->Phone info
This will create a shortcut on your homescreen which beings up a hidden "engineering" screen on which you'll find an drop down for "Set preferred network type" where you can select WCDMA only.
Regards,
Dave
alternatively, open the phone app
dial *#*#4636#*#* and select phone info
scroll down and set it to WCDMA only.
does the same thing but saves installing an app.
rhedgehog said:
alternatively, open the phone app
dial *#*#4636#*#* and select phone info
scroll down and set it to WCDMA only.
does the same thing but saves installing an app.
Click to expand...
Click to collapse
holy monkey! im going to try this!!! do i have to di it everytime i turn the phone of or is it permanent?
orouborus said:
that is what i hate about hero, it is really great except for the fact that it switches from 2g to 3g without notice. i want it to be permanently stuck in 3g for faster downloads and mms, but when it uses 2g, i cant send and receive mms and surfing the web is slow as heck! im still looking for an app that would permanently put the device in 3g just like with winmo it which you can use wcdma ONLY.
cheers!
Click to expand...
Click to collapse
That is not specific to the Hero. The fact is, every carrier's 2G network has better coverage than their 3G network. When the phone cannot detect strong enough 3G signal, it jumps back to 2G network. The idea is that slow data transmission is better than no data transmission at all. Many smartphones have the option to lock the mobile network to 2G only. One advantage is that it gets better reception, and another advantage is longer battery life (the 3G chip eats battery much faster than 2G).
If you instead lock the phone to its 3G network. The first thing you will notice is that battery life is significantly shorter. And chance is that you may be getting very spotty reception, because you are not allowing to phone to switch to 2G when it gets no 3G signal. When there is no 3G signal, forcing the phone to "3G only" mode won't give you faster download, it gives you no download.
tsekh501 said:
That is not specific to the Hero. The fact is, every carrier's 2G network has better coverage than their 3G network. When the phone cannot detect strong enough 3G signal, it jumps back to 2G network. The idea is that slow data transmission is better than no data transmission at all. Many smartphones have the option to lock the mobile network to 2G only. One advantage is that it gets better reception, and another advantage is longer battery life (the 3G chip eats battery much faster than 2G).
If you instead lock the phone to its 3G network. The first thing you will notice is that battery life is significantly shorter. And chance is that you may be getting very spotty reception, because you are not allowing to phone to switch to 2G when it gets no 3G signal. When there is no 3G signal, forcing the phone to "3G only" mode won't give you faster download, it gives you no download.
Click to expand...
Click to collapse
true true. i usually charge my phone everynight though. problem that i have with 2g is that i cant send and recieve mms and yeah data connection is slow. in our place 3g signal is ok. i also lock my topaz for wcdma only. but it is ok that it switches to 2g in low signal areas.
Thanks!
You actually use mms?
Wow, they do exist.
barryallott said:
You actually use mms?
Wow, they do exist.
Click to expand...
Click to collapse
yeah... mms is great. i use it to send items that i wish to purchase etc.
What NOM1 Networks are there in the UK? I only get 2g in my area (booo) and could do with an operator that works right. T-Mobile forums suggest they still have an issue
Hi
I've checked it with Hero running in PlusGSM in Poland.
Regardless if I select 2G/3G or even "WCDMA preffered/GSM Only/WCDMA only" setting the phone is not available for incoming voice calls during data transfer. Every time when I start internet connection (example: SSH session) I'm not available for incoming calls. At this site I do have both strong 2G and strong 3G networks.
I would like to mention that a few days ago I've swapped Samsung SGH-i600 (WinMo 6.0) for HTC Hero - so I'm using the same SIM card in the same network and the same place. SHG-I600 was able to perform both data transfer (on 2G) and voice (on 3G) on the same time. HTC Hero is not...
I wonder if this is 'feature by design' or a bug in software?
Hello.
I have a note 3 n9005 and when the network mode is WCDMA/GSM or LTE/WCDMA/GSM, my phone stays on GSM often. 3G signal is good in the area, and when I check my friends' phones, I find out their phones are on 3G network but mine is on 2G.
When I choose WCDMA Only, phone registers on 3G network and works without any problem. But switching back to auto connect, cause the phone to register on 2G again after some time.
So is there any configuration that tells the phone to stay on 2G if 3G signal is weak?
Please help if you can.
Thanks in advance.
Sent from my SM-N9005 using Tapatalk
The cell tower does this by signal quality, and most of the time distance dictates quality. I myself have asked around for AUTO 3G/4G only, but it seems like a subject where nobody has done any research.
Does your 3G signal differ from WCDMA only compared to Auto mode? If so, try updating to a newer firmware, could be a modem/baseband issue that may has been fixed in the mean time.
Technically it should grab the highest network of the three. So LTE has priority over WCDMA, which has priority over GSM. So even if WCDMA has one bar, and GSM 4, it should grab WCDMA until it completely loses that signal.
Have you tested another SIMcard in your phone? It may very well be a SIM problem.
PlutoDelic said:
The cell tower does this by signal quality, and most of the time distance dictates quality. I myself have asked around for AUTO 3G/4G only, but it seems like a subject where nobody has done any research.
Does your 3G signal differ from WCDMA only compared to Auto mode? If so, try updating to a newer firmware, could be a modem/baseband issue that may has been fixed in the mean time.
Click to expand...
Click to collapse
You say it is fault of the cell tower?
So why phones of my friends are ok about this issue and register on WCDMA?
I flashed 3 different lollipop ROMs but nothing changed. ?
ShadowLea said:
Technically it should grab the highest network of the three. So LTE has priority over WCDMA, which has priority over GSM. So even if WCDMA has one bar, and GSM 4, it should grab WCDMA until it completely loses that signal.
Have you tested another SIMcard in your phone? It may very well be a SIM problem.
Click to expand...
Click to collapse
Yes. That's exactly what I expect my phone to act about switching between network types.
I never tested another SIM in my phone. So I will check that as soon as possible. I will post the result. Thank you.
Sent from my SM-N9005 using Tapatalk
Hello, i live in a relatively small town where my service provider has very poor 4G signal. but pretty good 3G signal. With the Axon 7 i have a lot of signal problems that i didnt have with any of my previous phones, where outdoor signal is pretty bad and indoor signal is almost unusable. It also connects almost exclusively to 4G, and in contrast all of my previous phones connected almost exclusively to 3G. Over the last weekend i traveled to a major city where my service provider has very strong 4G signal, and the signal problem was almost non existant. I even had signal in places where other people with the same service provider did not. So my theory is the following, assuming that the hardware (antenna) used for 4G and 3G is the same, it may not be a hardware problem, but a problem with the software having a hard time knowing which band/signal it should connect to. It seems that in my case it prioritizes 4G signal and the cost of a VERY unstable cellphone service. This is also assosiated with the fact that when it connects to 3G (incredibly rare), the phone goes inmediately from 1/2 bars to 4/5 bars. I also changed the SIM configuration to leave LTE out, but either for a visual bug or a software bug, it keeps connecting only to 4G. So could this be the problem that me and a lot of people in low 4G signal zones are having? Is there anyway i can force the phone to connect exclusivly to the 3G signal to test if that is indeed the problem?
Regards!
Nehuen said:
Hello, i live in a relatively small town where my service provider has very poor 4G signal. but pretty good 3G signal. With the Axon 7 i have a lot of signal problems that i didnt have with any of my previous phones, where outdoor signal is pretty bad and indoor signal is almost unusable. It also connects almost exclusively to 4G, and in contrast all of my previous phones connected almost exclusively to 3G. Over the last weekend i traveled to a major city where my service provider has very strong 4G signal, and the signal problem was almost non existant. I even had signal in places where other people with the same service provider did not. So my theory is the following, assuming that the hardware (antenna) used for 4G and 3G is the same, it may not be a hardware problem, but a problem with the software having a hard time knowing which band/signal it should connect to. It seems that in my case it prioritizes 4G signal and the cost of a VERY unstable cellphone service. This is also assosiated with the fact that when it connects to 3G (incredibly rare), the phone goes inmediately from 1/2 bars to 4/5 bars. I also changed the SIM configuration to leave LTE out, but either for a visual bug or a software bug, it keeps connecting only to 4G. So could this be the problem that me and a lot of people in low 4G signal zones are having? Is there anyway i can force the phone to connect exclusivly to the 3G signal to test if that is indeed the problem?
Regards!
Click to expand...
Click to collapse
Without knowing which model Axon 7 you are using, where you are using it, and who your provider is, there is little anyone can do to help you. All I can say is that it helped me A LOT to go into settings and turn off
VoLTE.
tabletalker7 said:
Without knowing which model Axon 7 you are using, where you are using it, and who your provider is, there is little anyone can do to help you. All I can say is that it helped me A LOT to go into settings and turn off
VoLTE.
Click to expand...
Click to collapse
U model last update, using it from Argentina, and the provider is Claro. I have LTE disabled in SIM confg as i already said and VoLTE turn of as well but the phone keeps connecting to 4G no matter what i do, even if i configure it to only GSM
I don't think its a matter of position or provider (version could be if different software is provided), but a general issue with the phone and band/signal interpretation coupled with the apparent innability to go off 4G
Refards!
Nehuen said:
U model last update, using it from Argentina, and the provider is Claro. I have LTE disabled in SIM confg as i already said and VoLTE turn of as well but the phone keeps connecting to 4G no matter what i do, even if i configure it to only GSM
I don't think its a matter of position or provider (version could be if different software is provided), but a general issue with the phone and band/signal interpretation coupled with the apparent innability to go off 4G
Refards!
Click to expand...
Click to collapse
ok when it connects to LTE it says "4G LTE". The 4G that you are getting is probably HSPA or something. And we had someone on here a few months back using Claro in Argentina and they had to seek answers from their Claro
tabletalker7 said:
ok when it connects to LTE it says "4G LTE". The 4G that you are getting is probably HSPA or something. And we had someone on here a few months back using Claro in Argentina and they had to seek answers from their Claro
Click to expand...
Click to collapse
If "4G LTE" is 4G and "4G" is HSPA, when only a "G" appears, what band am i connecting too? Its still pretty weird that im having major signal issues in my town, but when i go to a big city my signal is even better than other phones, it seems inconsistent with the whole "bad hardware" theory. I talked to Claro and it seemed like from their end it was a non issue, can you point me to the thread to see if he got it fixed somehow?
Regards!
Nehuen said:
If "4G LTE" is 4G and "4G" is HSPA, when only a "G" appears, what band am i connecting too? Its still pretty weird that im having major signal issues in my town, but when i go to a big city my signal is even better than other phones, it seems inconsistent with the whole "bad hardware" theory. I talked to Claro and it seemed like from their end it was a non issue, can you point me to the thread to see if he got it fixed somehow?
Regards!
Click to expand...
Click to collapse
/Trolling a bit/
I'm always LMAO when I hear US people talking about that 4G scam (which is H+ for real btw)
G is for 2G
E is for 2G+
3G is 3G
H is 3G+
H+ is 3G++ (an intermediary protocol up to 42MBps)
4G is LTE (up to 150Mbps in the EU most of the time)
4G+ is LTE-A (which is available in most of the EU, SK & JP) - up to 600Mbps, 200MBps in most tests
I've not heard of an app that could modify the way the phone "clings" to 4G LTE, since that might likely be the modem firmware doing it on its own.
RedWave31 said:
/Trolling a bit/
I'm always LMAO when I hear US people talking about that 4G scam (which is H+ for real btw)
G is for 2G
E is for 2G+
3G is 3G
H is 3G+
H+ is 3G++ (an intermediary protocol up to 42MBps)
4G is LTE (up to 150Mbps in the EU most of the time)
4G+ is LTE-A (which is available in most of the EU, SK & JP) - up to 600Mbps, 200MBps in most tests
I've not heard of an app that could modify the way the phone "clings" to 4G LTE, since that might likely be the modem firmware doing it on its own.
Click to expand...
Click to collapse
Then this is even weirder, because is G is not 3G, but 2G it means that the phone NEVER connects to the major band that all of my previous phones and Claro users connect to. Is there anyway to force to only connect to 3G?
Regards!
i have the G european model, in my town i have bad lte signal 1/2bar, when with my previously xiaomi mi4c was got 4/5 bars (maximum). In the big town i have got in the most of cases 4/5 bars. I think the "signal problems" are relatives of a lack of somehow software. i told this because i've read with the china model with the last updates an improvement of the signal reception of the phone.
Nehuen said:
Then this is even weirder, because is G is not 3G, but 2G it means that the phone NEVER connects to the major band that all of my previous phones and Claro users connect to. Is there anyway to force to only connect to 3G?
Regards!
Click to expand...
Click to collapse
You can however force a specific protocol indeed, but you will lack the ability to autoswitch networks. Just download 4G LTE Switch (here) which is a glorified secret code dialer. Just click on prefered network and change at your convenience (4G LTE only, WCDMA only - H+ - and so on). Remember that if you force 4G LTE in an area in which you have no coverage, you won't have internet, and no 2G/3G fallback (so no texts, no calls)
I don't know if this is the same problem, but my wife has an iPhone 6+ and I have an A2017U on B29 stock root. We both use the same network (Movistar Mexico) and while her iPhone often registers LTE, my A7 often registers 4G or even E in the same place. The A7 is receiving the same bands but appears to be "choosing" or locking into the slower protocols more often.
EDIT: NEVER MIND… an xposed module was messing with my network settings. Fixed it. Now I get LTE right away.
nuserame said:
EDIT: NEVER MIND… an xposed module was messing with my network settings. Fixed it. Now I get LTE right away.
Click to expand...
Click to collapse
Which module?
What if flash any Custom OS?Would it give better signal ?
Hi everyone,
I already looked for an answer in the forum but nothing conclusive.
My moto g4 play loses signal during calls. The sim card is 3G and so I changed the network manually to 3g on the phone. However the problem continues and I think it even got worse. It happens especially when I'm moving, in the car, etc.
Is there any real solution for this problem? I have seen many users complaining but I did not realize if there was a solution or not.
Can you help me?
Thank you
Since the SIM is 3G, I'm going to assume the network you're using is GSM (ATT/Tmo). It is possible that the cell towers in your area operate on a specific type of GSM frequency, and your signal loss is due to the phone trying to connect to towers not supported by your carrier. If a call drops again, check the Roaming status of your phone in Settings and see what turns up.
Also, it seems odd that you would have to change the network settings at all. Even if the phone is set to prioritize LTE, it should automatically detect the 3G signal and adjust accordingly.
Hi everyone, I own this nice terminal, but I have a big problem. When I use the 2g network, since I'm in Italy and in 4g cannot receive calls, the phone has a very low signal and remains completely absent very often. I have the same problem when 4g makes the switch in 3g. Sometimes to recover the signal I have to turn the airplane on and off. It's normal? And does anyone have the same problem or can he help me? Is this a hardware problem? With a Xiaomi Redmi Note 3 Pro in I own these problems do not occur, so I rule out the problems of my network operator.
cdtech said:
Hi everyone, I own this nice terminal, but I have a big problem. When I use the 2g network, since I'm in Italy and in 4g cannot receive calls, the phone has a very low signal and remains completely absent very often. I have the same problem when 4g makes the switch in 3g. Sometimes to recover the signal I have to turn the airplane on and off. It's normal? And does anyone have the same problem or can he help me? Is this a hardware problem? With a Xiaomi Redmi Note 3 Pro in I own these problems do not occur, so I rule out the problems of my network operator.
Click to expand...
Click to collapse
Noticing similar issues here after the last 2 updates . My posts on the MI forum are being delted by the silly moderator
vkk178 said:
Noticing similar issues here after the last 2 updates . My posts on the MI forum are being delted by the silly moderator
Click to expand...
Click to collapse
Also noticing issues with Chromecast .It fails to detect Chromecast and need to toggle airplane mode
With the 7.10.14 i didn't noticed this.
Chromecast works perfectly, also i'm not facing problem with 2/3/4G signal.
Wifi is not that great however.
I'm not going to upgrade to latest version until they don't fix this problem.
cdtech said:
Hi everyone, I own this nice terminal, but I have a big problem. When I use the 2g network, since I'm in Italy and in 4g cannot receive calls, the phone has a very low signal and remains completely absent very often. I have the same problem when 4g makes the switch in 3g. Sometimes to recover the signal I have to turn the airplane on and off. It's normal? And does anyone have the same problem or can he help me? Is this a hardware problem? With a Xiaomi Redmi Note 3 Pro in I own these problems do not occur, so I rule out the problems of my network operator.
Click to expand...
Click to collapse
I'm in italy too but the modem, so far, worked really well for me.
I'm using vodafone and when receiving calls the signal switches back to 3g (very rarely 2g) but never faced any issue. After the call ends the phone switches back again to 3/4g in a few seconds.
fedemene said:
I'm in italy too but the modem, so far, worked really well for me.
I'm using vodafone and when receiving calls the signal switches back to 3g (very rarely 2g) but never faced any issue. After the call ends the phone switches back again to 3/4g in a few seconds.
Click to expand...
Click to collapse
I used Tim,maybe it's the problem or my phone have broken antennas.