Related
I unlocked the bootloader, installed TWRP. Everything was fine. I put SuperSU.zip into the phone, booted into TWRP, installed SuperSU.zip, and then selected wipe cahe/dalvik before exiting. Now I only get the erecovery. I then did a factory reset within TWRP and now I just get the Chines erecovery. Is there anything I can do?
Thank you
edit: I can see about 2GB of data in my system folder as well as others. It looks like the EMUI is there. My phone just doesn't know how to boot to it.
edit 2: I was able to sideload KangVIP but I'd rather have the stock ROM. Does anybody know where one is available?
Hello, as you have unlocked the bootloader? With the dc-unlock software?
Thanks
flint24 said:
I unlocked the bootloader, installed TWRP. Everything was fine. I put SuperSU.zip into the phone, booted into TWRP, installed SuperSU.zip, and then selected wipe cahe/dalvik before exiting. Now I only get the erecovery. I then did a factory reset within TWRP and now I just get the Chines erecovery. Is there anything I can do?
Thank you
edit: I can see about 2GB of data in my system folder as well as others. It looks like the EMUI is there. My phone just doesn't know how to boot to it.
edit 2: I was able to sideload KangVIP but I'd rather have the stock ROM. Does anybody know where one is available?
Click to expand...
Click to collapse
How did you install TWRP if you only see the erecovery?
My adb was working earlier today, but now, when I "adb reboot bootloader", it just says "error: device '(null)' not found"
EMUI isn't loading now.
That last thing I did was run "flash_all.bat" in "EDI-AL10-C233B027_6.0" from https://mega.nz/#!VRN2AICD!HqTY2ai1XAl-bOoCFW_YfBoyhOr6GhoiWXL68l7QNhg
The flashing was successfull but after it rebooted, I just encountered bootloops.
MarkAndroid said:
Hello, as you have unlocked the bootloader? With the dc-unlock software?
Thanks
Click to expand...
Click to collapse
Yes I unlocked the bootloader. I think when I went back into TWRP, ran the SuperSU.zip file and then wiped the cache/dalvik, that's what did it. Before I did that, after I unlocked my bootloader, I was able to reboot and boot back into EMUI no problem.
jetherson said:
How did you install TWRP if you only see the erecovery?
My adb was working earlier today, but now, when I "adb reboot bootloader", it just says "error: device '(null)' not found"
EMUI isn't loading now.
That last thing I did was run "flash_all.bat" in "EDI-AL10-C233B027_6.0" from https://mega.nz/#!VRN2AICD!HqTY2ai1XAl-bOoCFW_YfBoyhOr6GhoiWXL68l7QNhg
The flashing was successfull but after it rebooted, I just encountered bootloops.
Click to expand...
Click to collapse
So this is the stock Honor Note 8 image? I think I'll just do an adb sideload within TWRP with this badboy and be ok. I'm going to backup beforehand.
flint24 said:
Yes I unlocked the bootloader. I think when I went back into TWRP, ran the SuperSU.zip file and then wiped the cache/dalvik, that's what did it. Before I did that, after I unlocked my bootloader, I was able to reboot and boot back into EMUI no problem.
Click to expand...
Click to collapse
For unlocking the bootloader you followed the step by step instructions to the topic:
http://forum.xda-developers.com/general/general/huawei-honor-note-8-unlock-bootloader-t3488142
You're forced to buy the key (4 euro) on the site:
https://www.dc-unlocker.com/how-to-r...er-unlock-code
Thanks
flint24 said:
So this is the stock Honor Note 8 image? I think I'll just do an adb sideload within TWRP with this badboy and be ok. I'm going to backup beforehand.
Click to expand...
Click to collapse
No! That's NOT the stock note8 image.
That came from http://forum.xda-developers.com/showpost.php?p=70055340&postcount=658
MarkAndroid said:
For unlocking the bootloader you followed the step by step instructions to the topic:
http://forum.xda-developers.com/general/general/huawei-honor-note-8-unlock-bootloader-t3488142
You're forced to buy the key (4 euro) on the site:
https://www.dc-unlocker.com/how-to-r...er-unlock-code
Thanks
Click to expand...
Click to collapse
Yes. I actually bought 7 credits but yes I did that. My backup failed and I continued anyway.
jetherson said:
No! That's NOT the stock note8 image.
That came from http://forum.xda-developers.com/showpost.php?p=70055340&postcount=658
Click to expand...
Click to collapse
Ok got it. But is it safe to use on my HN8 anyway? This KangVIP rom sucks so bad.
flint24 said:
Ok got it. But is it safe to use on my HN8 anyway? This KangVIP rom sucks so bad.
Click to expand...
Click to collapse
The B017 stock honor note 8 is EDI-AL10C233B017CUSTC233D002_Firmware_China_Chann.zip
Try searching for that file.
BTW, I solved my problem awhile ago. I actually used that file. I had to extract the UPDATE.APP from it.
This phone is very difficult to brick.
jetherson said:
The B017 stock honor note 8 is EDI-AL10C233B017CUSTC233D002_Firmware_China_Chann.zip
Try searching for that file.
BTW, I solved my problem awhile ago. I actually used that file. I had to extract the UPDATE.APP from it.
This phone is very difficult to brick.
Click to expand...
Click to collapse
What about the B022 stock honor note 8 firmware? I believe that's the exact one that came with my phone.
Thank you very much for the help!
Nevermind. Everything is fine now. I loaded the firmware you have in your post saving the data on my sdcard. Everything works beautifully. Thank you very much. Consider this case closed.
Sent from my EDI-AL10 using Tapatalk
Hi!
I'm looking for a way to either root/twrp v1.2.0b02 (coming from stock files), or a way to apply the ota on a twrp'd/rooted v1.2.0b01.
I have tried this guide without luck starting from the point where the tool tries to flash twrp. when the phone tried to reboot into bootloader it just rebooted to the system.
With this guide i can't apply B02 as i get a mismatch error (forgot what the actual message was called).
any ideas?
thanks in advance!
edit: further information: i am currently on 7.1.1 b01 with unlocked-BL/twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process while in the (stock-) recovery.
1. Which version are you running?
2. are you already unlocked and
rooted?
If yes, just flash stock recovery with axon7tool and update your system in the usual way. If done, flash back TWRP and supersu. Done.
Gesendet von meinem ZTE A2017U mit Tapatalk
Its a good question. For e.g. I'm on b10 G version rooted. How to come to A2017GV1.2.0B02 rooted?
Just the same. Install stock recovery and follow the update process as described everywhere in this forum.
marcus.linkenbach said:
1. Which version are you running?
2. are you already unlocked and
rooted?
If yes, just flash stock recovery with axon7tool and update your system in the usual way. If done, flash back TWRP and supersu. Done.
Gesendet von meinem ZTE A2017U mit Tapatalk
Click to expand...
Click to collapse
1.
[...]or a way to apply the ota on a twrp'd/rooted v1.2.0b01.
Click to expand...
Click to collapse
2. trying it right now.
edit: results in a package mismatch.
Flaîm said:
1.
2. trying it right now.
edit: results in a package mismatch.
Click to expand...
Click to collapse
What ended in a package mismatch? Flashing the recovery or updating? (Sorry, didn't see your first quote)
Sent from my ZTE A2017U using XDA Labs
marcus.linkenbach said:
What ended in a package mismatch? Flashing the recovery or updating? (Sorry, didn't see your first quote)
Sent from my ZTE A2017U using XDA Labs
Click to expand...
Click to collapse
the update itself.
Hello,
I'm on A2017GV1.2.0B02, and I'd like to root it.
I have installed adb and axon7toolkit, but it seems there's no stock recovery anymore since 7.x firmware. So when I issue adb edl reboot, the phone is just rebooting the OS. :/
Which steps must I follow for rooting my stock A2017GV1.2.0B02 ?
Thanks.
Jeremy-X said:
Hello,
I'm on A2017GV1.2.0B02, and I'd like to root it.
I have installed adb and axon7toolkit, but it seems there's no stock recovery anymore since 7.x firmware. So when I issue adb edl reboot, the phone is just rebooting the OS. :/
Which steps must I follow for rooting my stock A2017GV1.2.0B02 ?
Thanks.
Click to expand...
Click to collapse
the command to edl is: adb reboot edl.
To boot into recovery it's just power + vol+ button.
But since nougat you cannot boot into bootloader anymore. This would be necessary to unlock the bootloader. Therefore you would have to follow the steps I already mentioned in this thread.
Sent from my ZTE A2017U using XDA Labs
---------- Post added at 01:49 PM ---------- Previous post was at 01:41 PM ----------
Flaîm said:
the update itself.
Click to expand...
Click to collapse
B01 is what? Android 7.0 or 7.1.1? If you are already on 7.1.1 you don't have to flash anything. You will receive the update to B02 OTA. Otherwise you have to follow the official steps to get where you want to be. Described a lot on xda.
Sent from my ZTE A2017U using XDA Labs
Thanks for the answer, but there's no recovery for the B02 7.1.1.
Jeremy-X said:
Thanks for the answer, but there's no recovery for the B02 7.1.1.
Click to expand...
Click to collapse
You are triyng to update your sistem with twrp and the stock update.
you need to go back to stock recovery, aply update from system, wait for process and then, reboot edl, and reflash recovery.
then from recovery root
Flaîm said:
I have tried this guide without luck starting from the point where the tool tries to flash twrp. when the phone tried to reboot into bootloader it just rebooted to the system.
Click to expand...
Click to collapse
My stuff was for reinstalling TWRP on an unlocked phone after Nougat deleted it.
You should try axon7toolkit and see if that does the stuff. Another way around would be to downgrade your phone to B10 (Marshmallow) via MiFavor's update by sd thingy, (i'm not 100% sure if it lets you get to mm from nougat, but it's definitely worth a shot) then trying the BL unlock thread (NOT mine!)
Choose an username... said:
My stuff was for reinstalling TWRP on an unlocked phone after Nougat deleted it.
Click to expand...
Click to collapse
ooooh! guess i misinterpreted the guide then. i never had the problem to begin with as i already unlocked my bootloader on 6.0b10.
ayways, i am currently on 7.1.1 b01 with twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process inside the (stock-) recovery.
Flaîm said:
ooooh! guess i misinterpreted the guide then. i never had the problem to begin with as i already unlocked my bootloader on 6.0b10.
ayways, i am currently on 7.1.1 b01 with twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process inside the (stock-) recovery.
Click to expand...
Click to collapse
Okay that happened to me. By "this guide" you mean what I posted close to the end right? the xda app just shows me the last post lol
Try to download the full B02 package. Some guy mirrored the full package on one of the B02 posts. Then try to use MiFavor's own updater. It worked for me, can't see why you couldn't use that
Choose an username... said:
Okay that happened to me. By "this guide" you mean what I posted close to the end right? the xda app just shows me the last post lol
Click to expand...
Click to collapse
here's the non-bb coded link https://forum.xda-developers.com/axon-7/how-to/guide-reinstall-twrp-root-update-to-t3578552
Choose an username... said:
Try to download the full B02 package. Some guy mirrored the full package on one of the B02 posts. Then try to use MiFavor's own updater. It worked for me, can't see why you couldn't use that
Click to expand...
Click to collapse
didn't see a b02 fota, sorry. mind linking it?
Flaîm said:
ooooh! guess i misinterpreted the guide then. i never had the problem to begin with as i already unlocked my bootloader on 6.0b10.
ayways, i am currently on 7.1.1 b01 with twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process inside the (stock-) recovery.
Click to expand...
Click to collapse
enable bootloader unlock in developer settings...
pelelademadera said:
enable bootloader unlock in developer settings...
Click to expand...
Click to collapse
hmm...
(attachment)
Flaîm said:
ooooh! guess i misinterpreted the guide then. i never had the problem to begin with as i already unlocked my bootloader on 6.0b10.
ayways, i am currently on 7.1.1 b01 with twrp/root thanks to this guide, BUUUT i can not update from that to b02.
when i flash stock recovery and try to update via ota i get a "package mismatch" error during the update installation process inside the (stock-) recovery.
Click to expand...
Click to collapse
You'll always get that mismatch regarding what you do or try. You'll need a custom made twrp flashable zip. Tron1 and I have tried to make one but no success. We will try to make a full flashable zip based on the full image.
Even if you flash your stock recovery back and do the OTA, you'll always get a mismatch regardless what others might say.
raystef66 said:
You'll always get that mismatch regarding what you do or try. You'll need a custom made twrp flashable zip. Tron1 and I have tried to make one but no success. We will try to make a full flashable zip based on the full image.
Even if you flash your stock recovery back and do the OTA, you'll always get a mismatch regardless what others might say.
Click to expand...
Click to collapse
that's what i was afraid of.
guess the zips again will be split into bootstack and system like his other flashable images, right?
Flaîm said:
that's what i was afraid of.
guess the zips again will be split into bootstack and system like his other flashable images, right?
Click to expand...
Click to collapse
Most likely.
I tried to restored a nandroid backup which didnt work, I then tried to lock and unlock bootloader thinking recovery would reset original image and that didnt work and now its wiped. Any suggestions as I'm looping into bootloader screen and I cant even push an image using adb.
Have you tried formatting your data in TWRP?
sting5566 said:
Have you tried formatting your data in TWRP?
Click to expand...
Click to collapse
Yes. But I have no way so far to get an oxygen os rom to my internal storage so I can flash. Just keeps going to fastboot mode.
Did you try reinstalling Twrp thru fastboot?
sting5566 said:
Did you try reinstalling Twrp thru fastboot?
Click to expand...
Click to collapse
How would that help if I have nothing to flash? I can get to twrp no problem.
SysAdmNj said:
How would that help if I have nothing to flash? I can get to twrp no problem.
Click to expand...
Click to collapse
You stated it kept going back into fastboot, sorry if I misunderstood. Your PC should see the phone while in TRWP, try another port on your PC or another cable.
sting5566 said:
You stated it kept going back into fastboot, sorry if I misunderstood. Your PC should see the phone while in TRWP, try another port on your PC or another cable.
Click to expand...
Click to collapse
Yes, my phone is wiped and no OS on it either. Thats probably why its going back to fastboot. Is my only choice to unbrick? Which as I'm seeing would require me to go to hydrogen os before even being able to go to oxygen os?
SysAdmNj said:
Yes, my phone is wiped and no OS on it either. Thats probably why its going back to fastboot. Is my only choice to unbrick? Which as I'm seeing would require me to go to hydrogen os before even being able to go to oxygen os?
Click to expand...
Click to collapse
Even with it wiped, if you have TWRP installed and no OS you should still boot back into recovery, not fastboot. I would still try installing TWRP again, use the codeworkx version, seems to work best for most people.
sting5566 said:
Even with it wiped, if you have TWRP installed and no OS you should still boot back into recovery, not fastboot. I would still try installing TWRP again, use the codeworkx version, seems to work best for most people.
Click to expand...
Click to collapse
Ok so I'm definitely not understanding, once I install twrp codeworkx version then whats my next step to get my device up and running?
SysAdmNj said:
Ok so I'm definitely not understanding, once I install twrp codeworkx version then whats my next step to get my device up and running?
Click to expand...
Click to collapse
After that I would format data in TWRP, reboot back into TWRP and then copy over a rom. Your PC should see the phone plugged in booted up in TWRP.
sting5566 said:
After that I would format data in TWRP, reboot back into TWRP and then copy over a rom. Your PC should see the phone plugged in booted up in TWRP.
Click to expand...
Click to collapse
You mean I can copy OS 5.0.1 and flash directly to it after I copy it over?
Nevermind it worked, thanks. My whole issue was I didnt know the whole time that my pc would see the device as a directory while in twrp. Now I wonder why originally I booted into a black screen bricked when I flashed magisk 14 earlier.
SysAdmNj said:
You mean I can copy OS 5.0.1 and flash directly to it after I copy it over?
Nevermind it worked, thanks. My whole issue was I didnt know the whole time that my pc would see the device as a directory while in twrp. Now I wonder why originally I booted into a black screen bricked when I flashed magisk 14 earlier.
Click to expand...
Click to collapse
Glad it worked out for you. What rom were you trying to flash and why magisk 14, newer ones are out now.
sting5566 said:
Glad it worked out for you. What rom were you trying to flash and why magisk 14, newer ones are out now.
Click to expand...
Click to collapse
OOS 5.0.1 latest version of oreo for oneplus 5 is what I flashed and running now. Now I'm attemping to flash magisk, latest version and hopefully dont run into the black screen.
SysAdmNj said:
OOS 5.0.1 latest version of oreo for oneplus 5 is what I flashed and running now. Now I'm attemping to flash magisk, latest version and hopefully dont run into the black screen.
Click to expand...
Click to collapse
The latest xXx rom is close to stock and runs great if you want to try something custom.
SysAdmNj said:
You mean I can copy OS 5.0.1 and flash directly to it after I copy it over?
Nevermind it worked, thanks. My whole issue was I didnt know the whole time that my pc would see the device as a directory while in twrp. Now I wonder why originally I booted into a black screen bricked when I flashed magisk 14 earlier.
Click to expand...
Click to collapse
It's a known issue. You have to use Magisk 15.2 or higher.
If you flash an older version you will get a black screen with a blue notification led.
maikvitesse said:
It's a known issue. You have to use Magisk 15.2 or higher.
If you flash an older version you will get a black screen with a blue notification led.
Click to expand...
Click to collapse
Yes, I learned the hard way
I thought I could flash 14 and just update to 15.2.
sting5566 said:
The latest xXx rom is close to stock and runs great if you want to try something custom.
Click to expand...
Click to collapse
I actually want to stay close to stock. I dont even want to use nova launcher, I"m staying with OP launcher. So far so good, Not sure upgrade was worth the trouble yet
I tried installing TWRP but always failed, the nearest TWRP build I can find is for gtanotexllte, but mine is gtanotexlltedx, so I tried flashing the non dx version (I haven't found the DX one) and It just bricked the tab, any help ?
Edit: My device is the S Pen version (SM-P585Y, Australian ROM, Android Oreo)
Jelly Hero said:
I tried installing TWRP but always failed, the nearest TWRP build I can find is for gtanotexllte, but mine is gtanotexlltedx, so I tried flashing the non dx version (I haven't found the DX one) and It just bricked the tab, any help ?
Edit: My device is the S Pen version (SM-P585Y, Australian ROM, Android Oreo)
Click to expand...
Click to collapse
You need a DEV to fix TWRP for your device because your TWRP you are using is for Android 6, it needs updating for working on android 8.1. Or if you want Twrp, you can downgrade to android 6 and flash it.
I tried downgrading but it says error bootloader binary 1...
raphael mark said:
I tried downgrading but it says error bootloader binary 1...
Click to expand...
Click to collapse
You can use Magisk Manager app to patch boot.img and flash using Odin to root the tablet
Thanks its works....and how can I Install a custom rom without twrp
Hi seniors, please guide me samsung bootloop SM-P585Y tab after trying to install twrp and then I flash the firmware to solve the problem failed to install twrp. after flashing the firmware successfully, I tried installing Twrp again and failed again. When I tried flashing the firmware it failed and "bootloader device 2, binary 1" appeared and finally the battery shutdown. please provide help for me
Guncloudes said:
Hi seniors, please guide me samsung bootloop SM-P585Y tab after trying to install twrp and then I flash the firmware to solve the problem failed to install twrp. after flashing the firmware successfully, I tried installing Twrp again and failed again. When I tried flashing the firmware it failed and "bootloader device 2, binary 1" appeared and finally the battery shutdown. please provide help for me
Click to expand...
Click to collapse
The Twrp is only for android 6 and need a developer to maintain it and fix error with android 8.1. If you want twrp, just downgrade your tablet to android 6 and flash twrp.
Tung Lam said:
The Twrp is only for android 6 and need a developer to maintain it and fix error with android 8.1. If you want twrp, just downgrade your tablet to android 6 and flash twrp.
Click to expand...
Click to collapse
Thanks for answer. i trying downgrade and just success. But always self reboot and stuck at logo samsung .
Mr Tunglam, what step to solve auto reboot?
Guncloudes said:
Thanks for answer. i trying downgrade and just success. But always self reboot and stuck at logo samsung .
Mr Tunglam, what step to solve auto reboot?
Click to expand...
Click to collapse
Make sure that u download right version of 4-file ROM of your tablet. Flash all 4 files with Odin.
Tung Lam said:
Make sure that u download right version of 4-file ROM of your tablet. Flash all 4 files with Odin.
Click to expand...
Click to collapse
Thanks for help.
Now my tab allready flash to android 7.
But after boot to system and phone screen lock ,all screen black just a black line white line.
Tung Lam said:
The Twrp is only for android 6 and need a developer to maintain it and fix error with android 8.1. If you want twrp, just downgrade your tablet to android 6 and flash twrp.
Click to expand...
Click to collapse
This step bring everythings fine. Thank you very much Mr Tung Lam
TWRP issues
Guncloudes said:
This step bring everythings fine. Thank you very much Mr Tung Lam
Click to expand...
Click to collapse
Commonly TWRP will not install if you're using a version incompatible with the device, check to make sure. You should always have the original stock frimware on hand in case anything goes wrong. If you do encounter difficulties such as bootloops you can basically start over by flashing in the stock firmware in download mode via Odin3. Sometimes after flashing it may take a while for the device to fully boot up, I've had some take hours.
Tung Lam said:
You can use Magisk Manager app to patch boot.img and flash using Odin to root the tablet
Click to expand...
Click to collapse
I get Odin fail with this. I'm using the Magisk 20.1 version. Do you have a solution?
Guncloudes said:
Thanks for answer. i trying downgrade and just success. But always self reboot and stuck at logo samsung .
Mr Tunglam, what step to solve auto reboot?
Click to expand...
Click to collapse
You have to wipe data after a downgrade.
Hi deleted my OS using TWRP and tried to install stock OP5 rom but couldn't and read somewhere that in order to install Stock ROM you need to be on Stock recovery, so I flashed stock recovery using TWRP and now I can't have my phone detected in adb or fastboot.
I can go into fastboot and recovery but my phone is not detecting in adb/fastbbot.
PS : When I had TWRP installed, I could see the device in adb devices and not fastboot.
And now with Stock Recovery, I can't see the device anywhere and hence can't install OS.
Please HELP!!!!
https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
try this
Can't follow steps 2 and 6
djnim said:
https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
try this
Click to expand...
Click to collapse
Can't follow steps 2 and 6
Thank you so much
djnim said:
https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
try this
Click to expand...
Click to collapse
THANK YOU SO MUCH Man, I didn't sleep whole night and couldn't fix it and now one post on XDA and you arrived.
Thank you so much
Hey Guys!!
I by mistake wiped system in my one plus 5 after installing twrp.
My phone now shows only blank screen with blue LED on the top. Is there any solution. Any help would be appreciated. Don't know where to search
Aayush96+ said:
Hey Guys!!
I by mistake wiped system in my one plus 5 after installing twrp.
My phone now shows only blank screen with blue LED on the top. Is there any solution. Any help would be appreciated. Don't know where to search
Click to expand...
Click to collapse
After you've wiped the system partition what you did? What was your rom, twrp, magisk version etc?