Related
my phone LG G2 D802 International Version was running perfectly fine i tried to flash another rom by LG FlashTOOL and in the first i got soft bricked on that fastboot screen i recoverd it by ADB (fastboot.exe)
fastboot erase recovery
fastboot erase laf
fastboot flash laf laf.img
and then i tried to reflash it then i got this mesg on screen
---------------------------------------------------------------------------
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
-------------------------------------------------------------------------
Board Info
Rev. : 1.1 speed.pvs : 1.1 Serial : 01e862cf934fc622
Please Help me somebody ... i cant afford to buy new phone i just bought this phone a week ago ..
Having same issue ! XDA forum experts always helped me with every situation with my phones. Expecting help this time as well from you experts.
Same here, enyone can help, i stuck with the sam message, presing vol- just rebots, and vol+ sends message "jump to download mode" but i cant flash stock firmware
i have the same problem any help ??
I have the same issue too, can anyone help?
I heard that this can help you guys. Use the search option there and try to fix it. Actually i had the same problem few months ago, but for me mew motherboard was the solution... If you're device is under warranty send it saying it failed while taking OTA. Good luck...
lg g2 critical error
I have done a flash to my g2 32gb d802 and it suddenly entered into critical error not going into any of thefastboot mode or download mode even though it is giving me options.....please any one help me out to get my phone back to normal ........
PM me if you guys need help.
I had the exactly same problem, and I had to go to afterservice center to repair. Engineer told he would wipe everything and install new rom. but He failed to write rom so he simply changed mainboard.
At first I had thought about open my g2 and makes it go into qualcomm download mode by short-circuit.
the reason I didn't was my warranty was still available.
I tried every method to make it boot into recovery or download mode but I failed. In my opinion, you may try short-circuit method for last solution. In this situation, even linux doesn't mount rom's storage section. Only if you can make G2 recognized in Linux, G2 will revive.
good luck.
xmayhemreturnsx said:
PM me if you guys need help.
Click to expand...
Click to collapse
i still don't know what to do HELP
yassou92 said:
i still don't know what to do HELP
Click to expand...
Click to collapse
The best way to go if you do not have a warranty is to short circuit the board and get into Qualcomm ... 9006 mode. However, when you get the demigod error plug in you usb and click up and it should start download mode even though it doesn't show it.
xmayhemreturnsx said:
The best way to go if you do not have a warranty is to short circuit the board and get into Qualcomm ... 9006 mode. .
Click to expand...
Click to collapse
How do you short the pins? There's a guide here on xda but it's so difficult to undestand. I need to know how can I short the pins.
it should start download mode even though it doesn't show it.
Click to expand...
Click to collapse
No, it doesn't. I try to use flashtool but it doesn't recognize the phone. No download mode in any method I tried
I got into this error after I had previously recovered into qhs_usb9006_bulk mode from a hard bricked D801, by shorting the capacitors on the main board. After entering qhs_usb9006, I used srk tools 2.1 for my phone, and after they finished, I tried entering download mode, only to get into this error. I really don't know what it is to say about this. Everything turned wrong with this phone, it went from simply failing a .kdz, to stock .tot, to hard brick, and now to this error, whereas it should've just enter the download mode, as for the 99,99% of the others. Any help would be really appreciated. Thanks.
L.E. I shorted the capacitors again (the one i the middle, like I did the first time, when i got into 9006 mode. 5000 and 5004 didn't work for some reason). This time I got into dload mode, which is 9008. I'll try to recover the phone from here, with this method:
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
i had this problem while trying to return to stock. Fixed it by following this guide http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 . it needs some hardware tampering though. i tried and tried but i cant flash the phone any other way. the way i understand this is due to bootloader being corrupt.
I installed autorec from playstore solved all the problems
Than you! autorec worked for me too
Can someone post a KK baseband for D801 (T-Mobile)? I'm on D80120a software version with unknown IMEI and baseband (the phone is a D801 refurbished into D802, I more than hardbricked it by flashing wrong .kdz, got it recovered through shorting pins, 9008 mode, got download mode, D80120a stock, root, twrp, after a very long and painful process of about 1 month). Now I have to make use of QPST, but I have to obtain a valid baseband first. Of all links I've stumbled upon, only 5% or less of them are still working, so I only have one flashable modem, in twrp recovery, which corresponds to D801 jb version.
http://downloads.codefi.re/autoprime/LG/LG_G2/G2_modems
cloudyfa kk_baseband_D801 only make my phone restarts like crazy.
I'm simply stuck and pray for some devine help.
Thank you.
Weird enough, I flashed a canadian modem and I got both baseband and IMEI. Why did I do that in the first place? Because I remembered that before all these things happened to my phone, the baseband was M8974A-AAAANAZM-1.0.190082, which corresponds to D803. So I said to myself what can happen by flashing the wrong modem? Boot loop, easily fixable with the phone in it's current state. But again, after 1 month of trouble with the phone, I'm back to what exactly started it in the first place: phone seem to work OK but it has 2 huge problems: WiFi extremely weak (2 meters away and a wall or 5 meters away and no wall a and I lose the signal in both cases; the 2nd is wit the GPS - 20-30 meters error). No idea how should I adapt the radio to Europe region (by keeping the canadian one and change the settings, if it's even possible/fixable this way or if this even does make any sense).
I had to do a hard brick fix to get it into the QSUSB mode to flash TOT.
Have you tried using LG Support tool to put it back to stock?
Sent from my LG-F350K using XDA Free mobile app
Hello all,
I have got LG G2 F320L. From the begining: I have got no baseband in it.. I restored it with @grandixximo way, but still I can't call anyone.. So I managed to do one really bad thing... I flashed this: https://www.youtube.com/watch?v=AbJQ09q_1P8#t=27
I don't thought, this will brick my device. I entered TWRP, flashed this, and again flashed TWRP(I was sure, if this rom will not start, I will restore backup from TWRP. I flashed this and first, i tried to reboot to recovery, but there was Security error, and next was Critical error.. So I took out the baterry, and pluged it again and turned on the phone. The next and the worst error is this:
________________________________________________
System Crash! : modem (subsys-restart: Resetting the SoC)
DemiGod Crash Handler : Subsystem Crash! :modem (subsys-restart: Resetting the SoC)
Press key to chose Dload Mode or Reboot.
1) Volume Up : Dload Mode
2) Volume Down: Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB
2) Get the ram dump image using QPST Configuration
_________________________________________________
Board Info
rev. : 1.1 speed.pvs : 1,2 serial: xxxxxxxxxxxx(I'll not show the sn)
_________________________________________________
ERR crash log report. Version 3.
Error in the file rfc.wcdma.cpp, line 1017
Error message: Failed to map device! band=%d dev_type=%d insteance=%d
Time of crash (m-d-y h:m:s): 01-06-1980 0:00:00
Uptime (h:m:s): 0:00:00
Build ID: M8974A-AAAANAZM-1.0.190116
param: (0x0, 0x3, 0x0)
aux_msg:
qxdm_dbg_msg:
That's all. And I don't have Download Mode, there is only fastboot mode (I can't flash anything via this, just stopping at "flashing boot...". What can I do now? I don't want to give it to repair service... Please help guys it's very big problem(I think, I'm first guy on this world who totally messed up bootloader )
First thing your not, I messed my f320k so much i couldnt repair it by anyway on SRK tool.
sent it to repair, afraid of even touching the motherboard.
they will try to fix it,
i hope for my best
about your problem, can you try to click volume up for download?
see if it does anything, if it boots into download mode, you're set.
if it says in the bottom "Jumped to Dload" then you can try to flash KDZ/TOT but it probably will fail in some point of the flashing process.
you can try shortening the pins if you have the guts to touch the motherboard.
good luck!
foxyfoxyblah said:
First thing your not, I messed my f320k so much i couldnt repair it by anyway on SRK tool.
sent it to repair, afraid of even touching the motherboard.
they will try to fix it,
i hope for my best
about your problem, can you try to click volume up for download?
see if it does anything, if it boots into download mode, you're set.
if it says in the bottom "Jumped to Dload" then you can try to flash KDZ/TOT but it probably will fail in some point of the flashing process.
you can try shortening the pins if you have the guts to touch the motherboard.
good luck!
Click to expand...
Click to collapse
So,
I tried this vol+ to enter Dload mode, but it don't want to turn in this mode. I tried with flash but flashtool 2014 stopped at 4%, flashtool 1.5 can't even start, but there is one thing. I think I just flashed "laf" partition, because when I plug this to charger, it shows the battery is loading. Do you have any idea to make this phone turning to QHusb_BULK mode?
ExtremeRoGo said:
So,
I tried this vol+ to enter Dload mode, but it don't want to turn in this mode. I tried with flash but flashtool 2014 stopped at 4%, flashtool 1.5 can't even start, but there is one thing. I think I just flashed "laf" partition, because when I plug this to charger, it shows the battery is loading. Do you have any idea to make this phone turning to QHusb_BULK mode?
Click to expand...
Click to collapse
Yup, and thats shortening the pins, look up through threads/videos how to do it. on F320 its easier cus the battery is loose, so just look up how to do it.
if you do do it, make sure to download the files for F320L.
Good Luck
foxyfoxyblah said:
Yup, and thats shortening the pins, look up through threads/videos how to do it. on F320 its easier cus the battery is loose, so just look up how to do it.
if you do do it, make sure to download the files for F320L.
Good Luck
Click to expand...
Click to collapse
Ok, I'll try this Thanks
BAD NEWS AND GOOD NEWS
Bad news is that, I can't find the C5000 and C5004 pins the processor looks very weird That's what my phone is showing inside and this System error:
Mobo: http://www.fotosik.pl/zdjecie/6b2039fe08bb584c
Error: http://www.fotosik.pl/zdjecie/3461c68c16e7e20a
Sometimes if I click the vol- to restart, it shows SK Telecom logo.
One more question, will the lcd and digitizer were good to D802? I can buy this one with broken screen and replace with that from F320L
GOOOOD NEWS!
So, I repaired the phone by shortening the pins Thanks bro, theard to close
Use this as a last resort!
http://forum.xda-developers.com/lg-g2/help/unbrick-lg-g2-force-flash-sendcommand-t3316773
Which is the better rom, 2.2 or this
I'm after battery time and camera
best rom for g2
sutty86 said:
Which is the better rom, 2.2 or this
I'm after battery time and camera
Click to expand...
Click to collapse
best rom for lg g2 is cloudy 2.7
best battery lige and good camera
hit thanks if i helped u
No Fastboot, No Recovery, No Download Mode, just a black screen. All Partitions of Phone got deleted. Pc is only detecting it as "Qualcomm HS-Usb Diagnostic 900E(Com10)" but unable to flash stock firmware. Getting the following error in Qfil.
...
"Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode".
Phone is also heating up as it have no OS installed.
I also faced this same problem in the past but i was able to recover my phone. Right now i don't remember how i did it but give me some time to think about it. I am sure someone else will help you just don't give up!!
Go to this link and try to follow their tutorial. It might help you.
https://firmwarefile.com/lenovo-vibe-k6-power-k33a42
ImSSin said:
I also faced this same problem in the past but i was able to recover my phone. Right now i don't remember how i did it but give me some time to think about it. I am sure someone else will help you just don't give up!!
Go to this link and try to follow their tutorial. It might help you.
https://firmwarefile.com/lenovo-vibe-k6-power-k33a42
Click to expand...
Click to collapse
Thank You ?
I am also trying my best to recover the phone and i will write here so that anyone who is facing this issue can recover his/her Phone.
No Solution found for this.
...
You have to send your Lenovo K6 Power to Lenovo Service Centre and get your Motherboard replaced.
If your phone is in guarantee then you will get free replacement no matter if your phone is rooted but please don't tell about root to them otherwise they will charge money for your small mistake.
what happened?
Do a new install
faizynadim said:
No Fastboot, No Recovery, No Download Mode, just a black screen. All Partitions of Phone got deleted. Pc is only detecting it as "Qualcomm HS-Usb Diagnostic 900E(Com10)" but unable to flash stock firmware. Getting the following error in Qfil.
...
"Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode".
Phone is also heating up as it have no OS installed.
Click to expand...
Click to collapse
Boss it seems that you have hard bricked your phone so it means it's first boot has been corrupted there is no chance as first boot is mandatory to flash any file, there are some tools like octopus, or Medusa box, they can repair your boot then the phone can be used its just an outside chance 5o get it in workable condition look for some person or Repairing person have this boot repairing gadget,
If this fails too or you have messed up very badly then, last option is mother board replacement, there is no software option to repair by yourself
Help please..!!!!
:crying:
Even I face the same problem...
How do I go to download mode..???
It's stuck at Lenovo screen .... It just turn off on low battery and reboots on long press of power button.. Is it compulsory to have 80% of charge to get into download mode..???
i did the same. it switches on with lenovo logo , shows the os logo animation and its stuck there. when i tried connecting it to phone it showing unspecified device.
i could get into a fastboot mode . but nothing ahead to that. please find me a solution
Help me same issue
faizynadim said:
No Fastboot, No Recovery, No Download Mode, just a black screen. All Partitions of Phone got deleted. Pc is only detecting it as "Qualcomm HS-Usb Diagnostic 900E(Com10)" but unable to flash stock firmware. Getting the following error in Qfil.
...
"Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode".
Phone is also heating up as it have no OS installed.
Click to expand...
Click to collapse
Did you find any solution for this, present i'm facing same issue, please tell me if you have any solution for this...
Hey
So I was flashing android 7.0 to an S8 and it completely died, this is how completely:
- No screen/LED/vibration motor
- No safety/recovery/download mode (and don't ask about button combos, I've tried them all)
- No USB recognition from device manager (not even as exynos in other devices, just nothing)
- USB jig does nothing
- It is however recognised by wireless chargers (but I doubt that has any real significance)
At this point my question is would a JTAG even work on it? Or is my only hope a complete motherboard replacement?
S8 Hard bricked
A_Bad_Marksman said:
Hey
So I was flashing android 7.0 to an S8 and it completely died, this is how completely:
- No screen/LED/vibration motor
- No safety/recovery/download mode (and don't ask about button combos, I've tried them all)
- No USB recognition from device manager (not even as exynos in other devices, just nothing)
- USB jig does nothing
- It is however recognised by wireless chargers (but I doubt that has any real significance)
At this point my question is would a JTAG even work on it? Or is my only hope a complete motherboard replacement?
Click to expand...
Click to collapse
hello!
same happened to me ......dont worry i will help u....
i think u flashed aosp rom
phone is not hard bricked its still not turned off believe me........
do the following:
donot charge phone for atlesat 24 hours .......
after 24 hours try to boot into download mode press button for like a minute it will work in multiple tries,,
immediately flash twrp and when flashed successfully suddenly press vol down + bixby + power it will boot into recovery
charge for 1 -2 hours , clear system and every thing if you have backup thats good other wise flash firmware......donot turn in till flashing the system and data in recovery mood......boot into download mood from recovery and there you go....if still a problem inbox me
Thanks, I'll give it a shot
ok let me know then
Jtag dead phone to life and rewrite IMEI
I had the same thing, sent it to Fonefunshop in England, they said they could fix it, the didn't even open it as discovered by the guys who fixed it and is necessary to use jtag.
Fonefunshop said eMMC chip was bad, which is not true, but that led me to search for someone to replace the chip. I found A2Z cellular in Ottawa, Canada. They got the phone to boot up, but IMMEI was null( I did this trying to flash back to stock after TWRP screwed up). They rewrote original IMEI , now phone works like new. These guys are amazing.
http://a2zcellular.com/
Thank you all for the advice.
But I have now managed to unbrick and reflash the firmware. khawarjaved's advice turned out to be what fixed it in the end.
That was close, nearly lost £30
A_Bad_Marksman said:
Thank you all for the advice.
But I have now managed to unbrick and reflash the firmware. khawarjaved's advice turned out to be what fixed it in the end.
That was close, nearly lost £30
Click to expand...
Click to collapse
I have been through that situation man.... So always ready to help, ??
Hi pros
I'm in kind of a similar situation....I think I flashed MY 950U PIE with wrong BL
This phone is dead....Doesn't boot...no download mode....No recovery mode....
When connected to pc....device manager Recognises device as QUALCOMM HS USB 9008
Any way to brig it back to life...?
Your phone is connected in edl download mod. It will accept special files which will allow it to boot to download mode and let you flash stock firmware
The tool used for this is emmcdl.exe
It has to come with phone specific files
No idea where to get it. Ask people here, those who root phones. They know.
My Asus Zenfone Max Pro M1 is stuck on the screen," Powered by Android". I have neither rooted nor unlocked the bootloader. I had received the error of "Your device is corrupted" and had followed the guide to remove that. For a month, my phone lagged and had a drop in battery. Restarting it has caused it to not work.Now, it's showing no signs of starting. Any help will be sincerely appreciated!
manav113 said:
My Asus Zenfone Max Pro M1 is stuck on the screen," Powered by Android". I have neither rooted nor unlocked the bootloader. I had received the error of "Your device is corrupted" and had followed the guide to remove that. For a month, my phone lagged and had a drop in battery. Restarting it has caused it to not work.Now, it's showing no signs of starting. Any help will be sincerely appreciated!
Click to expand...
Click to collapse
download 059 fastboot rom[search in forum you will find 059 fastboot rom. it is in-(how to use flashtool thread)]
unzip it.
connect your phone with pc as in fastboot mode.
double click on flashallAFT.bat or .cmd file from fastboot rom folder.
059 fresh installtion will be donw by this although you will lose all your data so please backup if possible.
after that if u still have that 'your device is corrupt' error follow my thread . corrupt state fix command dosnt mess with your system whatsoever. so either u deleted some files accidently or it got deleted during update. dont blame any buddy regarding that.
P53mutant said:
download 059 fastboot rom[search in forum you will find 059 fastboot rom. it is in-(how to use flashtool thread)]
unzip it.
connect your phone with pc as in fastboot mode.
double click on flashallAFT.bat or .cmd file from fastboot rom folder.
059 fresh installtion will be donw by this although you will lose all your data so please backup if possible.
after that if u still have that 'your device is corrupt' error follow my thread . corrupt state fix command dosnt mess with your system whatsoever. so either u deleted some files accidently or it got deleted during update. dont blame any buddy regarding that.
Click to expand...
Click to collapse
Thanks for Replying bro. TMy phone is not going to any mode ie neither fastboot nor recovery. Its only showing Powered by Android whatever combinations I go with.I am thinking to try the QFIL s/w.
manav113 said:
Thanks for Replying bro. TMy phone is not going to any mode ie neither fastboot nor recovery. Its only showing Powered by Android whatever combinations I go with.I am thinking to try the QFIL s/w.
Click to expand...
Click to collapse
go for qfil then but use 059 qfil otherwise 130 qfill u will lose your persist,factory,fsg partition. doownload 059 fastboot rom . it is combined fastboot qfill rom. use it same as other qfill rom but choose here ww_no-nfc_no-fsg raw program.
btw your device showing powered by android that means u can go into fastboot mode and recovery mode both. just press and hold power button untill u see restart of ur screen. as soon as u see that press violume up along with power key. u will def get acess to fastboot mode.
P53mutant said:
go for qfil then but use 059 qfil otherwise 130 qfill u will lose your persist,factory,fsg partition. doownload 059 fastboot rom . it is combined fastboot qfill rom. use it same as other qfill rom but choose here ww_no-nfc_no-fsg raw program.
btw your device showing powered by android that means u can go into fastboot mode and recovery mode both. just press and hold power button untill u see restart of ur screen. as soon as u see that press violume up along with power key. u will def get acess to fastboot mode.
Click to expand...
Click to collapse
Didn't worked.. QFIL s/w was not able to detect the port even after connecting the mobile.. Tried to completely discharge and recharge hoping it would work.. Now, its not even recharging.. Nothing works now..Feels like a motherboard problem now..Should I rebuy the 4GB version or look for another mobile?
Try asus service center
manav113 said:
Didn't worked.. QFIL s/w was not able to detect the port even after connecting the mobile.. Tried to completely discharge and recharge hoping it would work.. Now, its not even recharging.. Nothing works now..Feels like a motherboard problem now..Should I rebuy the 4GB version or look for another mobile?
Click to expand...
Click to collapse
motherboard issue not lead to sudden death of phone. did u encounter random reboot before every 10-20 mins if not no worry.
for qfill u have to turn off your phone and press vol + and vol - together and have to connect your hpone with pc. check device manager of pc it will show port and comt device 2-3 mins after successfull qualcomm diag port driver installation.
98har**** said:
Try asus service center
Click to expand...
Click to collapse
No response. They said they aren't able to fix it. Can give 1k for the lcd screen.. :crying:
P53mutant said:
motherboard issue not lead to sudden death of phone. did u encounter random reboot before every 10-20 mins if not no worry.
for qfill u have to turn off your phone and press vol + and vol - together and have to connect your hpone with pc. check device manager of pc it will show port and comt device 2-3 mins after successfull qualcomm diag port driver installation.
Click to expand...
Click to collapse
Didn't had any random reboot stuff. I thought voltage fluctuations might have affected it. I had charged it at the Airport the same day the phone gave up. The QFIL software was not able to detect port even while pressing vol+ and vol- .Service Centre tells me its a PCB problem and are asking 3k for repair. Looks like a new phone is somewhere in the line for future.
manav113 said:
Didn't had any random reboot stuff. I thought voltage fluctuations might have affected it. I had charged it at the Airport the same day the phone gave up. The QFIL software was not able to detect port even while pressing vol+ and vol- .Service Centre tells me its a PCB problem and are asking 3k for repair. Looks like a new phone is somewhere in the line for future.
Click to expand...
Click to collapse
well good riddance