Database Users

Htc 0300 in tri colour

I have a HTC ELF 0300 it is stucking in the tri colour screen with the following
IPL: 2.26.0002
SPL:2.28.0000
i have followed the advice i found on this forum of flashing the ROM but when i try the rom update utility it comes up with error 270 about the image also i tried the mtty process but it wont open the usb port
i tried flashing the SD Card but it then says "Invalid Certificate"
i'm a total loss and totally stuck..
any help appricated

Have you really read this sticky thread http://forum.xda-developers.com/showthread.php?t=406721 before flashing ?
Have you used "search" function with f.e. "stuck in bootloader" before posting ?
If not, please do and you'll find very useful solutions

i have read the theads over and over again and finally worked out mtty and worked out my phone is
elf0300
tmob050
it's still in tri colour mode yet i cant find a rom for it...
i tried the nbh file flashing to the memory card
but no luck....
heelllp

Do you know if you have Elf or Elfin?
It is essential for flashing original Rom Elf: http://forum.xda-developers.com/showpost.php?p=2045325&postcount=2
Elfin: http://forum.xda-developers.com/showpost.php?p=2045051&postcount=1

i haave an elf (p3450) well thats what it says on my box
i cant find the orginal rom for this and i'm totally stuck
any help is greatrully recived
also i have tried CID unlocking it so i can put custom roms on it but my computer wont active sync when the phone is connected through the USB port...

Also, what did you do to get your phone stuck in bootloader in the first place?

my brother did it to my phone before i'd even had chance to use it , and i don't know what he did.....sorry x

Try this and follow the instructions exactly http://forum.xda-developers.com/showthread.php?t=347700 and report pls

i tried this yesterday at first when i pressed enter i didnt get >cmd (which is what happening now)
then when i do get it eventually after many tries it sasys
cmd55 or something failed
and stays on 0% on a gray screen
sorry if i sound stupiud.

Ok
First you connect your device, then right click on active sync icon on your computer, chose connection settings and change according to the instructions then continue with mtty.exe

i have done this
when i press enter i dont get anything come up....
yesterday i managed to get it up though and just stayed gray screen at 0%

Try again a few times making sure you didn't overlook any detail.
I just found this http://forum.xda-developers.com/showpost.php?p=3395787&postcount=155 possibly mtty version doesn't work
2- Another possibility is unbricker rom http://forum.xda-developers.com/showthread.php?t=446242
3- gold card method (the links are dead so you should pm Dsixda)
Flash from the SD card:
ELF0IMG.nbh on a FAT32 filesystem, complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
1. Format microSD card from your computer.
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ELF0IMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted in the phone, start the bootloader (the bootloader is invoked by hold down the camera button and reset device with the stylus).
5. Confirm flashing on screen by pressing the power button (or the volume slider down).
6. Flashing might hang after some time but this is normal. Just wait.

Will try now and keep u updated
manny thanks x

Follow the instructions until you get cmd only, then return to the tutorial to continue
Good luck

Just an update
i downloaded the nbh file you sugested and tried both
1) flashing from the SD card by renaming file - when i do this is says checking sd contents then goes back to my bootlooder screen
2) running the romupdateutility.exe with the nbh file in the same folder it goes through then i get error 294 incorrect vender
i am unable to pm Dsixda about the gold card
i have no idea what else to try
ps: when running mtty i still get a gray screen then the bootloader screen.

Sorry to hear this, I'm out of ideas. Just some details not to miss:
try a hard reset
writing "ELF0IMG.nbh" (elf zero img and not elf o img)
google for mtty and download a few versions
Wait for an answer from Dsixda for gold card if you can't find your original rom

Creating your GoldCard
I don't remember well the procedure but you can try the following:
If you have access to a working pda or a working GPS device - PNA which is powered by WM (even modified) then you have to follow these steps:
Download this package and save it in your C:\ drive.
Run it.
(it will extract all the necessary files in C:\itsutilsbin (folder) and it will start the setup of Perl)
When the Perl - installation is finished run Perl Package Manager from Windows Start Menu.
Add repositories.
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml
(HowTo: run Preferences from the Perl Package Manager menu and switch to the repository tab)
After database synchronization install these packages:
Crypt-DES
XdaDevelopers-NbfUtils
(HowTo: at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon))
Format the sd card(FAT32) and insert it in a working pda.
Connect the working pda to the pc , wait to sync and run psdread.bat from C:\itsutilsbin.
Find an official rom from here with a ModelID which matches your device's one
Example: If your pda is an Elfin and you have ModelID ELF030000 then get the below rom from that thread.
RUU_Elfin_TMO_NL_2.26.114.52_4.1.13.52_03.08.90_BL UE_Ship.exe (T-MOBILE)
Device: ELF030000
CID: T-MOB003
Version: 2.26.114.3
Language: NLD
Click to expand...
Click to collapse
Extract the RUU_Signed.nbh, rename it to ELF0IMG.nbh and copy it to the sd card.
Fully charge your battery, insert the sd card to your pda, enter bootloader and flash from memory card
(Confirm flashing on screen by pressing the power button (or the volume down button)).
If everything went ok then you can use a HardSPL or a USPL to CID Unlock your phone and update the rom with one of your choice.
If you don't have a working pda use a card reader - Ubuntu (even from a LiveCD) and QMAT are required
Regards!

i don't have a working pda to use :-( the only pda i have is my bricked one :-(

buncie2010 said:
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
Click to expand...
Click to collapse
There is a way to use a card reader instead.
Using Ubuntu LiveCD and QMAT
ps:I wonder how did the wiki entry got erased?
Dsixda and all the members who worked on this had done a great job and it's really annoying that all their work was lost.

htc dimond flashing problem

hi i want to flash my htc touch dimond 2 but when in tri colour mode i conect it to pc . pc giving error usb device not recognised what shoud i do for it becous whithout contecd phone to pc i not able to flash it.

262068 said:
hi i want to flash my htc touch dimond 2 but when in tri colour mode i conect it to pc . pc giving error usb device not recognised what shoud i do for it becous whithout contecd phone to pc i not able to flash it.
Click to expand...
Click to collapse
to resolve it, try installing the ms ActiveSync (for Win XP) or WMDC (Vista and Win 7) on your computer !
ActiveSync ~ http://www.microsoft.com/en-us/download/details.aspx?id=15
WMDC ~ http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=14

i am using windows 7 and i install your given link driver but problem still same any other solution thanks for help dear

to flash the rom does not need to bring the device into botloader, simply connect your phone to your computer and wait until activesync /Windows Mobile Device Center admit and then run instead of .exe file (CustomRUU) at the rom

first thanks for help bro and in this phone when we switch it on its show htc window then restart so tell me how i flash it its not conected to pc in this condition . i do soft and hard reset on this phone already .give me full prosses link .

262068 said:
first thanks for help bro and in this phone when we switch it on its show htc window then restart so tell me how i flash it its not conected to pc in this condition . i do soft and hard reset on this phone already .give me full prosses link .
Click to expand...
Click to collapse
I think, you still can Flash ROM at your device using the Storage Card ! follow the guide at here ~ http://forum.xda-developers.com/showpost.php?p=7033683&postcount=3

thanks bro i understand all way to flash i download file and put it in blank mmc root dir with change name after that i press down volume key + power key phone start in tri color screen but after that its showing Loading... on screen and nothing more i wait one hour in this condition but nothing happen only loading showing .so what is problem or mistak i do in flashing tell me

262068 said:
thanks bro i understand all way to flash i download file and put it in blank mmc root dir with change name after that i press down volume key + power key phone start in tri color screen but after that its showing Loading... on screen and nothing more i wait one hour in this condition but nothing happen only loading showing .so what is problem or mistak i do in flashing tell me
Click to expand...
Click to collapse
previously make sure your MicroSD has formatted to Fat32! to format a memory card you can use the SD Formatter
open your file rom with winrar, Drag and drop ruu_signed.nbh file to a folder on computer then rename ruu_signed nbh. file to TOPAIMG.nbh and copy to memory card

plese bro give me a working rom link for this htc touch dimond 2 T5353 phone and thanks for all this help. i tried in this fourm but not able to find which is working perfect or not .
and i use 2gb card is thair any probem with card capacity

262068 said:
plese bro give me a working rom link for this htc touch dimond 2 T5353 phone and thanks for all this help. i tried in this fourm but not able to find which is working perfect or not .
and i use 2gb card is thair any probem with card capacity
Click to expand...
Click to collapse
no problem with capacity Card
Maybe you could try with the official rom http://shipped-roms.com/index.php?category=windows%20mobile&model=Topaz

bro in your link all file in exe extention how can i use that and when run in exe mode give some error in setup error message written in other language so i not understand any suggestion thanks bro

262068 said:
bro in your link all file in exe extention how can i use that and when run in exe mode give some error in setup error message written in other language so i not understand any suggestion thanks bro
Click to expand...
Click to collapse
You can view the contents of the file and extract it using WINRAR

I Download 5 rom files when i format card using fat in this condition its showning after tri screen looding then no image found and return to tri screen . and when i format card using fat32 its showing loading then chacking then not allow then return to tri screen whats happen bro tell me thanks.
hi bro whats happen . give me any idea

bro my problem still not solve i not able to flash my htc diamon2

262068 said:
bro my problem still not solve i not able to flash my htc diamon2
Click to expand...
Click to collapse
Can attach screenshot your device at the time of the bootloader mode ??

hear is video bro i format mmc with fat32 and fat (same result in both) then put rom file in root dir with change name as you given in this video after tri colour say loding then no image fond then return to tri colout screen back
say somthig bro

have you tried using another memory card ??

Is not clear what SPL you have.
Loading then not allow means that ROM is for other country.
Also means that you don't have Hard SPL.
You can recover only with ROM for what country ID have your device.

HTML:
You can recover only with ROM for what country ID have your device
how can i find country id in my set. in back panel of set i found made in tiwan is thair any solution now
tell me something my problem not solve

If your device the last time before brick still using the embedded operating system (ROM) default from the manufacturer, then you get to know country ID via specifications Shipped ROMs / official ROM at W I K I

[Q] Windows Mobile 5 fullscreen app

Hi All
recently bought a Motorola MC7094 off eBay... it has arrived and has some software installed that starts at boot up, it starts in full screen and i cant get out of it!
can anyone think of a way round this. i want to format the PDA but to do that i need to put the 'cleaner' files in the correct place on the PDA and i cant get to file explorer to do that. even going through browsing from my PC i cant get to the 'Temp' folder to put the cleaner files in there...
any help would be appriciated.
thanks
Bobro

You could try the Hard Boot key sequence from its successor the MC70. It is almost the same device.
Performing a Cold Boot - Hard reset ----- Simultaneously press the Power button and the 1 and 9 keys.
If it works, it will wipe the device to its original state at manufacture. Any software installed since will be lost. It should then boot up to the standard Windows Mobile 5/6 screen.

Solved
Thanks for the reply...
I have worked it out, you can create a folder on the PC called Temp and put the cleaner files in this folder... you can then paste this folder into the root of the PDA from 'My computer' (this folder was not visable but when pasting it askes if you want to overwright the folder. once this temp folder is on the PDA you can then do a hard reboot of the PDA. 1+9+power, it will say you need to connect AC power, once you dock the PDA again it will start the factry reset

[GUIDE] Stock Rom - All S3 Mini

This is a detailed guide on how to put stock recovery and rom back onto any Samsung Galaxy S3 Mini phone. I like also add that I have found the information used and images off other sites and users of XDA but I will place them in credit meaning that I am not taking any credit for this I'm just placing all information that's around internet into one place to make it simple for people.
I have tested all these methods on my Samsung Galaxy S3 Mini ( GT-I8190N ) and can confirm that they have worked 100% for my phone.
If find any newer methods then I will update this post and if find way to reword / make it easier for method that already listed then I will update that on the post.
Hope this detailed guide helps people out and I will try keep post up to date as much as i can.
Requirements:
- Samsung Galaxy S3 Mini GT-I8190 ( N / L / T )
- USB Data Cable
- Windows Laptop / Desktop
- Odin3 v3.07
- Stock Rom ( Main / Mirror )
- Stock Recovery ( CWM / Odin )
[1] Install Recovery:
CWM =
- Copy File onto sdcard
- Place sdcard into Phone
- Boot phone to Recovery Mode ( Hold Vol Up + Home + Power )
- Click Install Zip from sdcard
- Find downloaded file on sdcard
- Click Install this Zip
- Wait till completed install
- Click Reboot Device
Odin =
( DO NOT LOAD PIT FILE IN THIS METHODS )
- Extract Zip Folder's
- Boot up Odin
- Ensure that the RE-PARTITION is unchecked, only the AUTO-REBOOT and F.RESET TIME are both remained checked. Image 1
- Place Phone into Download Mode ( Hold Vol Down + Home + Power ). Image 2
- Plug Phone into Laptop / Computer via USB
- Wait till get Connection Sign. Image 3
- Press PDA and select downloaded recovery ( .tar file )
- Click START
- Wait till get a PASS. Image 6
- Boot up Phone
[2] Install Rom onto Phone
Single Package =
( DO NOT LOAD PIT FILE IN THIS METHODS )
- Extract Zip Folder's
- Boot up Odin
- Ensure that the RE-PARTITION is unchecked, only the AUTO-REBOOT and F.RESET TIME are both remained checked. Image 1
- Place Phone into Download Mode ( Hold Vol Down + Home + Power ). Image 2
- Plug Phone into Laptop / Computer via USB
- Wait till get Connection Sign. Image 3
- Press PDA and select downloaded Rom ( .tar file ). Image 4
- Click START
- Wait till get a PASS. Image 6
- Boot up Phone
Multi File Package =
( DO NOT LOAD PIT FILE IN THIS METHODS )
- Extract Zip Folder's
- Boot up Odin
- Ensure that the RE-PARTITION is unchecked, only the AUTO-REBOOT and F.RESET TIME are both remained checked. Image 1
- Place Phone into Download Mode ( Hold Vol Down + Home + Power ). Image 2
- Plug Phone into Laptop / Computer via USB
- Wait till get Connection Sign. Image 3
- Press PDA and select the .tar file associated with a name CODE after the build number example ' CODE_I9300xxxxx_xxxxx_.tar '
- Press CSC and select the .tar file associated with a name ‘CSC’ after the build number example ' CSC_XXX_I9300xxxxx_xxxxx_.tar '
- Press PHONE and select the .tar file associated with a name ‘MODEM’ after the build number example ' MODEM_I9300xxxxx_xxxxx_.tar '
Image 5
- Click START
- Wait till get a PASS. Image 6
- Boot up Phone
Images
Made these links to shorted the post
[1]
http://androidromupdate.com/wp-content/uploads/2012/06/ODIN-flasher-Guide-for-Samsung-Galaxy-S-III-GT-I9300-1.jpg
[2]
http://androidromupdate.com/wp-content/uploads/2012/06/Samsung-Galaxy-S3-Downloademode.jpg
[3]
http://androidromupdate.com/wp-content/uploads/2012/06/ODIN-flasher-Guide-for-Samsung-Galaxy-S-III-GT-I9300-2.jpg
[4]
http://androidromupdate.com/wp-content/uploads/2012/06/ODIN-flasher-Guide-for-Samsung-Galaxy-S-III-GT-I9300-3.jpg
[5]
http://androidromupdate.com/wp-content/uploads/2012/06/ODIN-flasher-Guide-for-Samsung-Galaxy-S-III-GT-I9300-5.jpg
[6]
http://androidromupdate.com/wp-content/uploads/2012/06/ODIN-flasher-Guide-for-Samsung-Galaxy-S-III-GT-I9300-6.jpg
Help
Boot Loop =
( DO NOT LOAD PIT FILE IN THIS METHODS )
- Take Battery out
- Put Battery in
- Boot into Download Mode ( Hold Vol Down + Home + Power ). Image 2
- Open Odin
- Click PDA and select this FILE
- Click START
- Wait till get a PASS. Image 6
- Boot up Phone
Credits
tys0n (XDA) - Rocovery Files , Odin Link and Help Section
androidromupdate.com - Guide and Images for Rom

Is it 100% working solution how to return back to stock ?

Penzio said:
Is it 100% working solution how to return back to stock ?
Click to expand...
Click to collapse
yes, but look at this too: http://forum.xda-developers.com/showthread.php?t=2159660
JackoMJ

I am locking this thread as we already have one much similar HERE
I really appreciate the time and effort you have put into making this thread for everyone, this is why I will leave it locked for reference and not delete it..
Thank you again

(Micromax a120) No network on *3G only* after flashing custom rom (HELP)

****PEOPLE WHO ARE THINKING ITS SPAMMING POST THEN BE ASIDE FROM THIS THREAD****
I am using mmx a120 (4.4.2,8gb) And when i was not om custom rom then it was locking locking my 2G network in 5-6s and 3G in 4-5s and also 3G only working fine but afterwards i try to install wiko 5.0 Rom then on sp tool its shows i have to use "format all+download" So i do that and i forget to take a backup and after rom flashed then 2G is locking in 30-50s and 3G in 2-4min and no network in 3G only and when choosing 3G only then also 2nd sim getting no network and i have to restart the phone to get back 2G again !
I have searched on xda and i got a solution also but that is for micromax a210 (And mine is a120) so, if anybody have faced this issue before and now solved then reply here !
***IT WILL BE HELPFULL FOR ME TOO MUCH***

Exactly the same issue with me
I am suffering from the exact same problem. I recently flashed my mmx A120 with stock ram and just like you, I didn't make a backup of any sorts. Now I have rooted my phone and I have 2gb for app installation. Everything is good except now when I choose 3g only, the network signals instantly vanishes. It's becoming a huge problem for me as no body likes to use 2g. I mean Nobody ! If you come across a solution please do help me as well by letting me know. I will be grateful to you.

Solved Canvas A120 3G work perfect
Sushant.420 said:
I am suffering from the exact same problem. I recently flashed my mmx A120 with stock ram and just like you, I didn't make a backup of any sorts. Now I have rooted my phone and I have 2gb for app installation. Everything is good except now when I choose 3g only, the network signals instantly vanishes. It's becoming a huge problem for me as no body likes to use 2g. I mean Nobody ! If you come across a solution please do help me as well by letting me know. I will be grateful to you.
Click to expand...
Click to collapse
Hi,
Update parameters via maui 3g meta tool,
1. Open mauimeta 3g tool (run as administrator)
2. From options select connect smartphone in meta mode
3. Press reconnect
4. Switch off your phone and connect it to usb. the phone will boot up and stuck on boot logo(dont panic its normal). After sometime in the tool u will see the phone's parameters like gsm850,it means that it is successfully detected by the tool
5. Now select update parameter from the drop down menu,a popup will appear
6. click on change nvram database and select the given modem file
7. click on load from file and select the ini file
8. wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
If you want ini configuration file of canvas a120
Suggest how to upload

rahulramavat5 said:
Hi,
Update parameters via maui 3g meta tool,
1. Open mauimeta 3g tool (run as administrator)
2. From options select connect smartphone in meta mode
3. Press reconnect
4. Switch off your phone and connect it to usb. the phone will boot up and stuck on boot logo(dont panic its normal). After sometime in the tool u will see the phone's parameters like gsm850,it means that it is successfully detected by the tool
5. Now select update parameter from the drop down menu,a popup will appear
6. click on change nvram database and select the given modem file
7. click on load from file and select the ini file
8. wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
If you want ini configuration file of canvas a120
Suggest how to upload
Click to expand...
Click to collapse
Link
https://drive.google.com/drive/folders/1jsHzdo3_kM14N-LwjK0uk9gyIbqXKkVw
---------- Post added at 03:57 PM ---------- Previous post was at 03:54 PM ----------
rahulramavat5 said:
Hi,
Update parameters via maui 3g meta tool,
1. Open mauimeta 3g tool (run as administrator)
2. From options select connect smartphone in meta mode
3. Press reconnect
4. Switch off your phone and connect it to usb. the phone will boot up and stuck on boot logo(dont panic its normal). After sometime in the tool u will see the phone's parameters like gsm850,it means that it is successfully detected by the tool
5. Now select update parameter from the drop down menu,a popup will appear
6. click on change nvram database and select the given modem file
7. click on load from file and select the ini file
8. wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
If you want ini configuration file of canvas a120
Suggest how to upload
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/1jsHzdo3_kM14N-LwjK0uk9gyIbqXKkVw