Hi guys,
Yesterday I updated to the new N9005XXUENA6 Leaked KitKat 4.4.2. Didn't really think much of it and finally decided to root the phone.
I rooted the phone with CF-Auto-Root thanks to chainfire. Anyway after that I installed CWM recovery as TWRP haven't really updated it since the new update for note 3.
Now i can get to the CWM recovery and after installing any rom
I tried
1. [JAN-13][hlte][1.2.4] AOSB Project (ProBAM ROM) - The End of The Line ! and then
2. [CM11][4.4.2][N9005][ROM][KERNEL][JAN13] temasek's UNOFFICIAL Build - V33
However, in both cases I get an error:
Kernel is not seandroid enforcing
set warranty bit: kernel
and keeps on boot looping.
I can get into download and recovery but cannot install any custom ROM's.
After a bit of looking around and what i gathered from similar questions,I tried installing a couple of kernels but still its a no go!.
Is it as a result of the new N9005XXUENA6 update? or me doing something idiotic?
P.S: Tried wiping data / factory reset, format partition / system, etc. Cannot find fix permissions in the new CWM however and cannot use TWRP as it just doesn't boot up into the recovery.
Thanks in advance.
Kratumay
kratumay said:
Hi guys,
Yesterday I updated to the new N9005XXUENA6 Leaked KitKat 4.4.2. Didn't really think much of it and finally decided to root the phone.
I rooted the phone with CF-Auto-Root thanks to chainfire. Anyway after that I installed CWM recovery as TWRP haven't really updated it since the new update for note 3.
Now i can get to the CWM recovery and after installing any rom
I tried
1. [JAN-13][hlte][1.2.4] AOSB Project (ProBAM ROM) - The End of The Line ! and then
2. [CM11][4.4.2][N9005][ROM][KERNEL][JAN13] temasek's UNOFFICIAL Build - V33
However, in both cases I get an error:
Kernel is not seandroid enforcing
set warranty bit: kernel
and keeps on boot looping.
I can get into download and recovery but cannot install any custom ROM's.
After a bit of looking around and what i gathered from similar questions,I tried installing a couple of kernels but still its a no go!.
Is it as a result of the new N9005XXUENA6 update? or me doing something idiotic?
P.S: Tried wiping data / factory reset, format partition / system, etc. Cannot find fix permissions in the new CWM however and cannot use TWRP as it just doesn't boot up into the recovery.
Thanks in advance.
Kratumay
Click to expand...
Click to collapse
if you are getting
Kernel is not seandroid enforcing
set warranty bit: kernel
on boot screen thats normal
try flash a rom then flash this straight after http://forum.xda-developers.com/showthread.php?t=2507403
should all work fine
jaythenut said:
if you are getting
Kernel is not seandroid enforcing
set warranty bit: kernel
on boot screen thats normal
try flash a rom then flash this straight after http://forum.xda-developers.com/showthread.php?t=2507403
should all work fine
Click to expand...
Click to collapse
Thanks for the reply,
So once again, I did a factory reset then flashed the rom and then flashed the file you recommended.
Still a no go
Same problem.
kratumay said:
Thanks for the reply,
So once again, I did a factory reset then flashed the rom and then flashed the file you recommended.
Still a no go
Same problem.
Click to expand...
Click to collapse
Based on what I read so far regarding the 4.4.2 update, if you flashed it on your device, there seems to be no way to go back to 4.3 ( I'm not sure if that means custom roms based on 4.3 as well ). Best thing to do is just flash the official 4.4.2 and hang in there until custom roms based on 4.4.2 comes out or people find a way to go back to 4.3. The reason the file from firasusman didn't work is probably because there might be difference in how kit kat deals with efs compared to jellybeans which it was written for in the first place.
Sent from my SM-N9005 using xda app-developers app
You probably are right as it doesn't really work. Anyway I'll keep waiting
Sent from my SM-N9005 using XDA Premium 4 mobile app
same here
Yip you won't be able to go to a lower bootloader than you are on with KK, CM based ROMs are currently running (MJ7) _ will have to wait until the new bootloader is implemented into new(er) builds.
Thanks for that info. Will keep an eye out. Cheers
Sent from my SM-N9005 using XDA Premium 4 mobile app
kratumay said:
Thanks for that info. Will keep an eye out. Cheers
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi all,
I Have the same error " Recovery is not Seandroid Enforcing " but it's when I try to root my SM-N9005 with the procedure of the SM-9005 (My phone can't be rooted)
(true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html)
When I try to restart in recovery mode step 11 in the link :
(11 -Once flashing completed, your Galaxy Note 3 SM-N9005 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. You can operate TWRP recovery using touch.)
This message appears : "Recovery is not Seandroid Enforcing ", and the phone restart, if I stop pushing button, i startup without rooted, If i Continue to push volume up and home buttons, it always boot with Recovery is not Seandroid Enforcing
Have you an idea ?
Thanks
tritri71 said:
Hi all,
I Have the same error " Recovery is not Seandroid Enforcing " but it's when I try to root my SM-N9005 with the procedure of the SM-9005 (My phone can't be rooted)
(true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html)
When I try to restart in recovery mode step 11 in the link :
(11 -Once flashing completed, your Galaxy Note 3 SM-N9005 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. You can operate TWRP recovery using touch.)
This message appears : "Recovery is not Seandroid Enforcing ", and the phone restart, if I stop pushing button, i startup without rooted, If i Continue to push volume up and home buttons, it always boot with Recovery is not Seandroid Enforcing
Have you an idea ?
Thanks
Click to expand...
Click to collapse
Before you did this was your 4.4.2 on KitKat working well? Or did you come from 4.3? If you came from a correctly installed 4.4.2 then do go to this thread and start from STEP 8
http://forum.xda-developers.com/showthread.php?t=2614787
download the files required from STEP 8 onwards.
This is CWM recovery and not TWRP. I dont have experience with TWRP.
tritri71 said:
Hi all,
I Have the same error " Recovery is not Seandroid Enforcing " but it's when I try to root my SM-N9005 with the procedure of the SM-9005 (My phone can't be rooted)
(true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html)
When I try to restart in recovery mode step 11 in the link :
(11 -Once flashing completed, your Galaxy Note 3 SM-N9005 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. You can operate TWRP recovery using touch.)
This message appears : "Recovery is not Seandroid Enforcing ", and the phone restart, if I stop pushing button, i startup without rooted, If i Continue to push volume up and home buttons, it always boot with Recovery is not Seandroid Enforcing
Have you an idea ?
Thanks
Click to expand...
Click to collapse
I'm assuming you're on 4.3, you have to use this in pda/ap on odin. After flashing phone will restart with android and texts in color. After that it will reboot again to system and you will have root. SEandroid Enforcing is normal if you're rooting you're device. Have you checked with root checker if you have root? Also, once you root your device you will have to flash a custom recovery like cwm or twrp to be able to boot to those recovery.
Hakired said:
Before you did this was your 4.4.2 on KitKat working well? Or did you come from 4.3? If you came from a correctly installed 4.4.2 then do go to this thread and start from STEP 8
http://forum.xda-developers.com/showthread.php?t=2614787
download the files required from STEP 8 onwards.
This is CWM recovery and not TWRP. I dont have experience with TWRP.
Click to expand...
Click to collapse
Thanks a lot !
It Works !
tritri71 said:
Thanks a lot !
It Works !
Click to expand...
Click to collapse
Awesome enjoy kitkat
n9005 cm11 20140226 problems
yesterday i installed cm11 nightly 20140226 on my n9005 via twrp 2.6.3.7 (before i have had 4.3)
it all works fine except 2 little problems:
1. whenever i plug the charger or usb cable to computer, the phone is turned on automatically without pushing the power button.
2. my time & date settings can't be saved, and each time on turning on it goes back to 2013 and 12:00
Thanks in advance to all answers
Same problem
I got the same problem. I have Bobcat 4.3 installed and i'm trying to install Omegarom 4.4.2 but I get stuck in bootloop with '' Kernel is not Seandroid Enforcing ''
Kjetilz said:
I got the same problem. I have Bobcat 4.3 installed and i'm trying to install Omegarom 4.4.2 but I get stuck in bootloop with '' Kernel is not Seandroid Enforcing ''
Click to expand...
Click to collapse
First you will have to update to stock 4.4.2 then you can flash any 4.4.2 roms.
Need some help.Newbie here. I just recently bought a samsung n3 tmobile n900t. I wanted to flash an international ROM to remove those tmobile apps (since im using a different carrier) So I found this ROM here http://forum.xda-developers.com/showthread.php?t=2518249
Installed CWM and flashed the rom. Now i'm in the Kernel is not seandroid enforcing set warranty: kernel loop. What should I do to fix this?
Mediaspot said:
Need some help.Newbie here. I just recently bought a samsung n3 tmobile n900t. I wanted to flash an international ROM to remove those tmobile apps (since im using a different carrier) So I found this ROM here http://forum.xda-developers.com/showthread.php?t=2518249
Installed CWM and flashed the rom. Now i'm in the Kernel is not seandroid enforcing set warranty: kernel loop. What should I do to fix this?
Click to expand...
Click to collapse
The rom you flashed is based on android 4.3, if the phone you bought already have 4.4 then that is probably the cause of the loop. Flash another rom based on 4.4 or download stock firmware from sammobile and flash using odin.
hey_joe said:
The rom you flashed is based on android 4.3, if the phone you bought already have 4.4 then that is probably the cause of the loop. Flash another rom based on 4.4 or download stock firmware from sammobile and flash using odin.
Click to expand...
Click to collapse
I just tried flashing this rom but the same thing. http://forum.xda-developers.com/showthread.php?t=2671039 will try to look for stock firmware and be back with results
I am getting same error but after that phone boots up fine
Hi I have a n 9005 and I'm wanting to install echoe rom I'm rooted a every time I go to install it I get the not seandroid enforcing and when it eventually boots up it freezes any idea what I'm doing wrong?
newman121 said:
Hi I have a n 9005 and I'm wanting to install echoe rom I'm rooted a every time I go to install it I get the not seandroid enforcing and when it eventually boots up it freezes any idea what I'm doing wrong?
Click to expand...
Click to collapse
Are you with K. K??? Have you flash stock rom?? We need more info.
I'm running the stock jellybean 4.3 all i have done to the phone is root it I attempted to install it and it didn't work so I restored it via carp hope this is enough
SOLVED
Hi guys,
First of im not new to rooting or placing custom roms on phones i have done the same with.
HTC Wildfire
HTC HD2 (now this one was a B...th to Flash and root)
Samsung galaxy Core
Samsung Note 1
Now i have purchased a Samsung Galaxy S3 Neo (gt-i9301l)
And tryed to flash CM12 on it using T.W.R.P 2.8.5.0 recovery for S3 Neo and Odin3 V1.85
Now as soon as i start revovery it already tells me "Recovery is not seandroid enforcing"
i manage to flash CM12 but at boot it tells me "Kernel is not seandroid enforcing"
Now i reverted back to stock (I9301IXXUANH1_I9301IPHNANG1_I9301IXXUANF2_HOME.tar) With Odin3 v1.85 and did the same thing with CM11 with the same results.
now im at stock again and could really use a hand anyone have some suggestions
Don't worry. It's nothing. I have that message as well and everything is fine.
Sent from my GT-I9301I
if u find a phone not getting past the initial screen fine, but i would like to be able to do more then just stare at my screen.
That message is normal and it isnt the problem. U exposed it wrong.
What is happening apart from that Message?
it just showes that message at the samsung splash screen and it stays on that boot screen.
Have you already found a solution?
If not, maybe ask the developer?
Sent from my GT-I9301I
I solved The problem as soon as i flashed cm12.1 it worked ty all for Being helpfull And patient.
kernel not seandroid enforcing
Dyrth Duthon said:
I solved The problem as soon as i flashed cm12.1 it worked ty all for Being helpfull And patient.
Click to expand...
Click to collapse
i also flash cm12.1 in my galaxy i9301i but i get also the message during boot "kernel is not seandroid enforcing" is there something missing or what? is it normal? help guys...thanks in advance....
[FIX] flash Kernel version 3.8 in recovery as a zip file which is compatible with cm12.1 then reboot and the message will dissappear!
Hello ,
I have a Samsung s7 edge and I really want kali nethunter on my phone. I found a version on my phone but when I install the software trough twrp manager. I could only install it if I formated my data. But when i rebooted my device it always said "kernel is not seandroid enforcing". I don't know why this keeps showing up ...
So i installed stock frimeware so I would be able to use my phone again. Now i also wanted to install a costum rom (King rom). Here is also needed to format my data b4 I could installl the rom. Instal complete but still have the message "kernel is not seandroid enforcing.
Please do you know how to fix this issue ??
I'm struggeling really hard
Hi guys,
looking for some help I trying to root and install a custom ROM on my phone (J500FNXXU1BPH1)(6.0.1)
I have installed twrp but on boot i get set warranty bit: recovery and kernel is not seandroid enforcing then the phone crashes with fading pixels.
If i boot in with the recovery sequence it will load twrp and let me move around inside but anything i do do not have effect on the boot.
WelshY1987 said:
Hi guys,
looking for some help I trying to root and install a custom ROM on my phone (J500FNXXU1BPH1)(6.0.1)
I have installed twrp but on boot i get set warranty bit: recovery and kernel is not seandroid enforcing then the phone crashes with fading pixels.
If i boot in with the recovery sequence it will load twrp and let me move around inside but anything i do do not have effect on the boot.
Click to expand...
Click to collapse
Go to this thread-https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 and download recovery of your model
aarush.chaurasiya said:
Go to this thread-https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844 and download recovery of your model
Click to expand...
Click to collapse
that is the one i'm using j500FN
WelshY1987 said:
that is the one i'm using j500FN
Click to expand...
Click to collapse
That's for Android 5.1..1 you need this one [RECOVERY] [TWRP-3.0.2-0] Samsung Galaxy J5 [MM][Android 6.0.1]
About the "seandroid enforcing" just ignore it, it's because your rom was modified.
American_Jesus said:
That's for Android 5.1..1 you need this one [RECOVERY] [TWRP-3.0.2-0] Samsung Galaxy J5 [MM][Android 6.0.1]
About the "seandroid enforcing" just ignore it, it's because your rom was modified.
Click to expand...
Click to collapse
even with that one it's still booting and glitch crashing unless i boot into download or recovery. It even do the pixel fade with the 2 errors on top just by plugging in charger and not even turning it on
WelshY1987 said:
even with that one it's still booting and glitch crashing unless i boot into download or recovery. It even do the pixel fade with the 2 errors on top just by plugging in charger and not even turning it on
Click to expand...
Click to collapse
Working after flashing official rom and TWRP, BUT can't flash other roms (update process ended with ERROR: 7
WelshY1987 said:
Working after flashing official rom and TWRP, BUT can't flash other roms (update process ended with ERROR: 7
Click to expand...
Click to collapse
Check if your flashing the right ROM for your phone model.
Status 7 error is caused while the ROM’s updater script file checks to see if the phone model of your phone is compatible with the ROM you are installing
Click to expand...
Click to collapse
American_Jesus said:
Check if your flashing the right ROM for your phone model.
Click to expand...
Click to collapse
i have tried with 2 rom downgrading to 5.1
https://forum.xda-developers.com/ga...m-cyanogenmod-13-0-samsung-galaxy-j5-t3519580
and 6.0.1
https://forum.xda-developers.com/galaxy-j5/development/p-resurrectionremix-v5-7-4-t3497445
WelshY1987 said:
i have tried with 2 rom downgrading to 5.1
https://forum.xda-developers.com/ga...m-cyanogenmod-13-0-samsung-galaxy-j5-t3519580
and 6.0.1
https://forum.xda-developers.com/galaxy-j5/development/p-resurrectionremix-v5-7-4-t3497445
Click to expand...
Click to collapse
Post your problem on ROMs thread, CM13 installation works fine, but you need firmware from 5.1.1 and TWRP for the 5.1.1 .
You need the right TWRP for your current firmware, like if CM13 uses firmware from 5.1.1 you need to 1st downgrade to Android 5.1.1 and then install TWRP for 5.1.1.
Same for rom that uses other firmware version
Try flashing stock using TWRP recovery. If you have a PC, you can enable MTP in the Mount menu in TWRP and connect it to PC and then move the firmware file and install it using TWRP again.
Alternatively, you can boot into download mode (Vol. Down+Home+Lock Screen simultaneously) and install the stock firmware using ODIN.
You can also create a backup of your apps in TWRP so that you can restore them after you have installed stock firmware.
Ready to help if you need more elaborate steps or any other information.
Had completely same problem with My bootloader. I just downgraded to 5.1 stock with Odin and flashed twrp by Nick Verse. After that I had no problems flashing any roms.
WelshY1987 said:
Hi guys,
looking for some help I trying to root and install a custom ROM on my phone (J500FNXXU1BPH1)(6.0.1)
I have installed twrp but on boot i get set warranty bit: recovery and kernel is not seandroid enforcing then the phone crashes with fading pixels.
If i boot in with the recovery sequence it will load twrp and let me move around inside but anything i do do not have effect on the boot.
Click to expand...
Click to collapse
Have you reflaahed the stock firmware set up all the phone and then reflash the recovery ? This could fix