Hello,
Got a little problem here.
Yesterday i wanted to flash to nougat from dload method which bricked my device so i ended up on DC phoenix.
I choose the right file and put it in the program and put the phone in fastboot and did succesfully flash the phone...
But after the reboot the phone keeps going into eRecovery no matter how many times i flash this phone still the same issue at all..
Do you maybe know how to fix this device ? thanks
Related
i tried to upgrade my samsung grand prime(SM-G530H) using kies .the process completed without any disturbances but then my phone got soft bricked. no recovery too.. the phone keeps on rebooting but doesnt pass the boot screen. only download mode is accessible. tried to flash every possible thing via odin,but no improvements. Flashed recovery img and official firmware too. but no use.
i have not found a solution till now for this exact problem.Help me out
hey please help me i cant even go to download mode and recovery i was installing the stock firmware after that i had installed xenon rom for my sm-g530h it had some problems or bugs so i decided to install the downgrade stock firmware, when i started to install, it was not installing i tryed about 3 times, and now, i cant get any response now, i cant able to put in download mode or recovery, even it dont showing me the charging... please help me i cant detect it on my computer also please help me :crying:
facing same problem
mak3022 said:
i tried to upgrade my samsung grand prime(SM-G530H) using kies .the process completed without any disturbances but then my phone got soft bricked. no recovery too.. the phone keeps on rebooting but doesnt pass the boot screen. only download mode is accessible. tried to flash every possible thing via odin,but no improvements. Flashed recovery img and official firmware too. but no use.
i have not found a solution till now for this exact problem.Help me out
Click to expand...
Click to collapse
i am also facing same problem pls help me out if the solution is there/
Hi,
Oke i will save you most of the details which is normally not the best part but i think it doesn't matter how i got here anymore. Basically i tried to update my phone to nougat. So i installed TWRP. Before i could install that i had to unlock bootloader and my phone which i did. After that i succesfully installed TWRP and directly my problems started...
I couldnt get my phone booted into recovery. Finally after hours spending i managed to hook it up on the adb tools via the command line. Long story short, the only thing my phone does right now is boot, where i get the warning that my device is unlocked. If i do a normal boot, nothing happens, if i go to fastboot i can do nothing there because my PC doesn't see the device anymore. I cant use HiSuite to recover it because it shows me a warning that i dont have right for support. When i go to erecovery and connect to my wifi and recover the phone, the package info always fails.
So is there anything i can do to get my phone back to work? Because i am really out of options, somehow sometimes i managed to get into that "installing update" part but appearantly the file in my dload is not the right version so the update always fails.
What to do i? I am really about to smash my phone because i am so mad at myself that i bricked my dive :crying:
Try to get the right firmware for your device or if you remember your old one.
Flash stock recovery and then lock your bootloader also.
Put the firmware inside of your sd card and make a folder called 'dload' push the update.app there inside and make the 3 button way
Good luck.
And if its gonna end badly, Huawei have a VIP service which they will repair it for free IF it is still under warranty.
https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124
Get correct firmware from this page & put update.app in dload folder
if you can boot into fastboot, the pc should be able to see it. have you tried looking into device manager to see if the driver is working?
anyway, if you were on stock marshmallow, you should be able use the 3 button combo to reflash the stock rom. after that the phone should be in factory state, with stock recovery and locked bootloader (eventhough in fastboot it still says unlocked).
Hi Guys,
I would greatly appreciate any help. I have somehow lost the TWRP & Stock recovery to my ZTE ANXON 7 MINI.
I had a custom rom and decided to flash a stock update zip and that rendered my phone unusable. I have managed to get it too boot to 6.0.1 B9 Spanish rom. However i have NO RECOVERY to flash the original update for the UK B12 Rom.
Im using the EDL Tool to flash. If anyone has the stock recovery to the B9 6.0.1 Rom that would be a big help. Or a EDL full backup.
All links to the ZTE website are down as they are no longer allowed to use ANDROID.
Also to note i have tried to reinstall TWRP however im left with either a white screen or nothing just bootloop.
Unable to unlock bootloader also as i have no fastboot option as recovery is dead
Thanks.
This are (full flash)EDL roms(need to extract to folder "flash\full ",and flash(not recovery ))B12.6Android.EDL.EU.Version
B13.Android7.EDL.EU.Version
A18xcn said:
Hi Guys,
I would greatly appreciate any help. I have somehow lost the TWRP & Stock recovery to my ZTE ANXON 7 MINI.
I had a custom rom and decided to flash a stock update zip and that rendered my phone unusable. I have managed to get it too boot to 6.0.1 B9 Spanish rom. However i have NO RECOVERY to flash the original update for the UK B12 Rom.
Im using the EDL Tool to flash. If anyone has the stock recovery to the B9 6.0.1 Rom that would be a big help. Or a EDL full backup.
All links to the ZTE website are down as they are no longer allowed to use ANDROID.
Also to note i have tried to reinstall TWRP however im left with either a white screen or nothing just bootloop.
Unable to unlock bootloader also as i have no fastboot option as recovery is dead
Thanks.
Click to expand...
Click to collapse
If you have white screen or ZTE logo then I know how to solve it.
Funny enough, hook the phone to the pc, open adb command and type adb devices.
You will see you pc recognises the phone in adb as recovery.
If this happens let me know and I'll show you how to push the entire bootstack to data/media, then write all these files to each partition. After that your twrp will work and you are done.
These happened to me about 10 times now and I even created a bat file which I double click and it does all the operations at once then reboots straight into twrp. Quite cool actually.
Nevertheless I'm also interested in an edl ROM to umbrick another axon 7 mini I have which is totally, utterly bricked.
I have opened the phone (still opened) and I managed once to get the test point to work and connect to qcn configurator but since then I never got it to be recognised again.
Good luck
Cheers
bius88 said:
This are (full flash)EDL roms(need to extract to folder "flash\full ",and flash(not recovery ))B12.6Android.EDL.EU.Version
B13.Android7.EDL.EU.Version
Click to expand...
Click to collapse
Mate, you don't know how helpful this post was.
I have bricked this [nasty] phone about 10 times.
but yesterday I learn yet another lesson, after trying to flash a new splash screen, the phone went totally dead, connecting directly in DFU mode.
I sort of panicked because I didn't have a fresh data backup and there aren't full EDL ROM for this phone easily found on the web.
After focusing in making sure my laptop had the correct drivers (loader/bulk/adb) and after I got confident to use the deepflash cable to move from DFU to EDL, bulk device recognised, right click on it and update the driver to show the loader (901D) then I though what would be the next step.
I did not understand the MIflash tool and the version I had didn't seem to work at all I scratched my had for a while.
I then used the EDL tool, placed your files into the FULL folder and ran through the steps...….mate.....that was beautiful.
I ended up flashing the full B13 on top of the B09 and the system works perfect without any loss of data.
Having learnt all this, I went brave and confident I could rescue my other axon 7 min, which had been dead for over 2 months. Although I had to open it to access the test point, after about 50 or more attempts, I had tried lots of combinations, test point again etc.
It turned out I have left the phone plugged in to the PC with every plug disconnected except the usb board and went to do the washing up. 2-3min later my pc gave a sound, loader 901D was already ready and I repeated the exact process.
You basically saved both of my phones!!!! THANK YOU
Good evening! I hope you can help me.
I flashed LineageOS 14.1, but I wanted to go back to EMUI. I made all the wipes and tried to flash different stock firmwares through a forced update (volume buttons + power button), but it never worked. At that point, I read about a guy in this forum who suggested to create a flashable zip with Huawei Update Extractor: I followed the suggestion and tried to flash it with TWRP. No error was given, but when I tried to restart, TWRP told me I had no OS installed. I thought it was strange, so I tried to restart anyway. That's when I got in rescue mode. I can't get into the recovery and I can't use fastboot. What rescue mode shows me is:
RESCUE MODE
Attention!
Please update system again
Update User Guide:
*link*
*android avatar*
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
Pressing the three buttons, I'm able to force an update. The problem is I can't find a firmware that doesn't get rejected. With Lollipop firmwares, it starts to install, but it fails at 12%. With Marshmallow ones, the installation process doesn't even start.
What can I do to make it work again? I'm very sad because this phone was gifted to me a couple of days ago and I already messed it up. I don't even know how to turn it off.
What can I do to get in fastboot mode? At that point, what should I do to flash the stock firmware? Or maybe do I need to find the first stock firmware ever installed into this phone to make the forced update work?
Please, I need help. Thank you in advance!
P.S. The phone's model is ALE-L21. I live in Italy, so I assume it's a European version.
Did you managed to fix this?
Jhon_Locke said:
Did you managed to fix this?
Click to expand...
Click to collapse
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
ErikChimello said:
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
Click to expand...
Click to collapse
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Jhon_Locke said:
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Click to expand...
Click to collapse
No, it doesn't show anything if I write that command...
I guess mine won't ever boot into the rom because it seems like there's no system installed. I made some researches and found out there are some softwares that let you reflash the partitions IF the phone is recognized as "HUAWEI USB COM 1.0". I'm still trying to figure out how to do it correctly though. I feel like if I do something wrong, then my phone won't probably turn on again.
In your case, you should be able to flash a custom rom without any issue. You just have to be very careful and inform you as much as you can: I don't want your phone to end up like mine?. Anyway, it seems pretty hard to go back to the stock rom, so think about it before you flash a custom rom. Also, make a Nandroid Backup is very important.
Hi
My phone stopped working a couple of days ago, I had been running a custom rom for 2 mths. I tried to restart and boot to recovery TWRP as I was going to reflash the rom. It charegs with no lights, for a day I couldnt boot to TWRP if it did it stayed on the start screen with no options. Today I can get options in TWRP so I tried to start fresh install but intstallation stops at step 1 ?
I have no idea what happened to the phone or why it just died, but dont understand why I can get into TWRP but cant flash rom etc. Also sometimes it say system destroyed message? but still can get into TWRP ?
Any ideas or help will much appreciated really would like to fix this rather than write the phone off.
Thanks
i think flashing firmware is the only option
ranjodhricky said:
i think flashing firmware is the only option
Click to expand...
Click to collapse
Hi, yeah I think thats what I try, is this flashing stock rom via MI flash or a different process?
try miflash if doesn't work try QFil
update
ranjodhricky said:
try miflash if doesn't work try QFil
Click to expand...
Click to collapse
Hi, been playing with this when i have time over the last few weeks.
I have been trying to flash firmware, I dont seem to be able to get QFIL to work for me, it wont reconsise the port. However MIFlash does but I get errors, sometimes it flashes but doesnt end? other times i have had error flashing modem_a or error flashing modem_b (maybe device is locked).
In ADB it says already unlocked. Also I can only boot into fastboot, not recovery so i cant intall anything from adb sideload, it wont boot into bootloader just powers off if i try this. I guess theres no recovery on it now as I cannot boot into it.
Any ideas on where to go from here , EDL? I really didnt want to attempt to open the phone.
Thanks
Try miflash 2019 with stock rom pie latest with edl mode
if bootloader unlocked You can enter edl mode via fastboot with the command 'fastboot oem edl'
Yincen said:
Try miflash 2019 with stock rom pie latest with edl mode
if bootloader unlocked You can enter edl mode via fastboot with the command 'fastboot oem edl'
Click to expand...
Click to collapse
Thanks, tried this, says success then just carries on , so i have to disconnect. However when then trying to boot the device it shows Android one logo and if im lucky after a few attempts it goes to the screeen saying Hi There, where you choose your language to set up the phone. However it nows seem to be unresponsve and frozen on that screen.
Im beginning to think its could be hardware issue and phone is just faulty, i really dont want to bin it as its imacculate condition seems a real shame, but it is 3 years old i guess.
Any further help or ideas much appreciated.
healy2k said:
Thanks, tried this, says success then just carries on , so i have to disconnect. However when then trying to boot the device it shows Android one logo and if im lucky after a few attempts it goes to the screeen saying Hi There, where you choose your language to set up the phone. However it nows seem to be unresponsve and frozen on that screen.
Im beginning to think its could be hardware issue and phone is just faulty, i really dont want to bin it as its imacculate condition seems a real shame, but it is 3 years old i guess.
Any further help or ideas much appreciated.
Click to expand...
Click to collapse
try doing a factory reset from Recovery , good luck